I figured out the + now looking to get rid of the T.
Keith
AK6ZZ
-Original Message-
From: Keith Heimbold
Sent: Sunday, February 23, 2014 6:12 PM
To: Elecraft Group
Subject: [Elecraft] K3 issue in CW mode
I just turned on my 2m transverter and when I went back to 6m my CW doesn't
be helpful.
Thanks,
Keith
AK6ZZ
-Original Message-
From: Ham Radio
Sent: Sunday, February 23, 2014 7:46 PM
To: Elecraft Group
Subject: Re: [Elecraft] K3 issue in CW mode
I figured out the + now looking to get rid of the T.
Keith
AK6ZZ
-Original Message-
From: Keith Heimbold
I have been having some issue with receive sensitivity dropping several S units
on 40m and 20m after I transmit with no change to SWR both with amplifier in
line and also completely bypassed (meaning I physically disconnected the amp
and went straight to the antenna from the K3).
I am not
After a very nice mobile contact with my K3 serial 1391 on 17m today with
Mauritania while waiting for my mom to finish some Christmas shopping at
Kohls, I thought I would provide an update on how the mobile install is
coming.
With the help of my friend and professional installer, we have the
Thanks Adrian for sharing this. Does anyone have the modified Rigcat that
goes with the Microham Microkeyer 2 that they would be willing to share for
FLdigi?
Keith
AK6ZZ
-Original Message-
From: Adrian
Sent: Friday, November 23, 2012 7:05 PM
To: elecraft
Subject: Re: [Elecraft]
I was uploading my newly arrived, upgraded and fixed K3 serial 1526 from the
factory to the latest version and it froze with the MCU LD displayed and the K3
utility program asking to be closed. I was doing the upgrade of the MCU
through a virtual port set up by Microham uRouter program and
Nevermind found in the Cady manual what I did wrong. Fred Cady’s book rocks!!!
Keith
AK6ZZ
From: Ham Radio
Sent: Monday, November 19, 2012 9:00 PM
To: Elecraft group email
Subject: {K3} New Upload of MCU stuck
I was uploading my newly arrived, upgraded and fixed K3 serial 1526 from
I embarked on a project to move parts from one K3 to another and I got the rigs
back from my tech elmer tonight. After getting the K3s home, I decided to
follow the procedure to get them operating again.
I had my tech elmer transfer the KAT3, KRX3, KDVR3 and KBF3 from one of the K3
to the
I just received an email that the tech moved the DSP2 and SYN to 1526.
I will email and call tech support to find out what is up.
Keith
AG6AZ
-Original Message-
From: Mike K2MK
Sent: Friday, October 19, 2012 8:08 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Parts transfer
I am trying to reconfigure the K3 to include getting the internal transverter
for 2m working properly again. I was able to make a simplex contact on the
calling frequency and now I am trying to get the offsets set up for repeater.
I am looking at both the Fred Cady, the K3 2m transverter
Not sure what happened but after a full reset everything is beautiful again.
Transmit audio is as it should be. I wish I would have saved previous
settings but it didn't take too long to get most of them back to normal. It
was actually fun to go through the configurations because I am ashamed
helpful!!!
Thanks,
Keith
AG6AZ
-Original Message-
From: Don Wilhelm
Sent: Sunday, September 02, 2012 10:09 PM
To: Ham Radio
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Mufflied audio - new issue
Keith,
You mention 2 K3s, so that brings up the question of what are you
Issue 1 is resolved thanks to Don, W3FPR.
Keith
-Original Message-
From: Ham Radio
Sent: Monday, September 03, 2012 10:16 AM
To: d...@w3fpr.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Mufflied audio - new issue
All -
I decided to reset the K3 and unfortunately cannot
Message-
From: Ham Radio
Sent: Monday, September 03, 2012 10:16 AM
To: d...@w3fpr.com
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Mufflied audio - new issue
All -
I decided to reset the K3 and unfortunately cannot find the config file. I
am trying to get it back running and am
on new software developments for the iPad and ham
radio software especially the KX3 would be super appreciated.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I was operating tonight after some fun this weekend working some nice DX since
conditions were so great. I decided for some reason to listen to my audio on my
K3 serial 1391 and it sounded really muffled. I switched to my other K3 and
everything sounded perfect with same two headsets switching
Steve,
I am looking at the Hi-Q-3/80 RT Hi Q antenna. I will also have a separate
vertical for 6m. I also plan to have some small computer installed in the
truck or a small Ipad. I am working with a guy in san diego who does all
the emergency response, Police and FD trucks and cars. We are
I have a crimper and will redo them today. Right after I put a phase
inverter on my 6m stack. So many projects, so little time.
Need to get these things done before the baby comes. he is due in on
Tuesday.
Thanks,
Keith
AG6AZ
-Original Message-
From: Eugene Balinski
Sent: Sunday,
Don,
Will do so. I did switch out two complete headsets including adapter and
foot switch and had the same experience. I have done a RFI cleanup effort
and so far things have not re-occurred.
Thanks,
Ketih
AG6AZ
-Original Message-
From: Don Wilhelm
Sent: Saturday, July 28, 2012
I just received KX3 serial 847 yesterday and I have it connected to my
SteppIR 3 element and am blown away by the receiver. It is super quiet and
nice and the roofing filter works extremely well. Made my first QSO with a
local ham for the VHF contest. I am so amazed. I did hear some issues
Quick question. My K3 keeps switching back to 6m when I turn it to 2m. It
will go to any frequency on 2m and then a second later switches back to 54.0
MHz. Any thoughts?
In the middle of the VHF contest, will look this up in parallel.
Thanks,
Keith
Randy,
Thanks that was the ticket!
Really appreciate it.
Keith
From: Randy Farmer
Sent: Saturday, June 09, 2012 2:20 PM
To: Ham Radio ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] 2m Transverter keeps switching back to 6m
Are you running NaP3? I encountered the same thing and found you
I just turned on my K3 this morning and received to my surprise Error PA1
and PL1 messages. It was working fine yesterday. When energizing the rig I
heard a couple clicks and then I energizes. Receive audio is low and output
is next to zero. I am reinstalling firmware as I saw that it
Everything with the upload of the firmware 4.51 seemed to have solved this
issue. The reflector database was extremely helpful. Could this be a portend
of some serious issue in the K3? Any thoughts on this.
Thanks,
Keith
AG6AZ
-Original Message-
From: Ham Radio
Sent: Friday, June 08
24 matches
Mail list logo