would
keep me from doing that. Otherwise, is there anything that anyone has found
that works particularly well?
Thanks,
Joel - W4JBB
K2 #4833
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help:
thing you think I might be interested in, please just email me
privately. If the email doesn’t show up in this, my email on QRZ.com
<http://qrz.com/> is a good email for me.
Regards,
Joel - W4JBB
__
Elecraft mailing list
If so, consider it a lagniappe.
Price is $2000 for all shipped to your door. I will accept a cashier's check
drawn from a US bank / credit union, a USPS money order, a Zelle transaction
(will have to split), or payment to my wife's Venmo account.
Pictures available upon request.
Regards,
Joel
SOLD pending funds.
Thanks,
Joel - W4JBB
> On Mar 14, 2023, at 10:33 AM, Joel Black wrote:
>
> I have a loaded KX3 for sale. I have found a KX2 (which is what I originally
> wanted) and am selling the KX3.
>
> I am the third owner of this radio and it has come fr
just as it
enters the mic. I have never used it and didn’t notice it until I was getting
it all together. The price I’m asking reflects this (I’m not including the mic
in the price).
I have pictures available upon request.
73,
Joel - W4JBB
.
Thanks again.
Joel - W4JBB
> On Dec 14, 2022, at 6:20 PM, Jack Brindle wrote:
>
> Joel;
>
> It’s worth the look. We have most apps for both Windows and Mac.
> By the way, the KPA500 firmware was developed and is still maintained using a
> Mac mini, which is a good
&
for Winlink using my Flex.
Thanks,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
All,
As Alan said, A desoldering iron works great on thru hole parts.
I use one from Amazon "Velleman VTDESOL3U Vacuum Desoldering Pump with
Heater" about $18.
Joel - N1JEO
On Mon, Mar 14, 2022 at 9:20 AM G4GNX wrote:
> For surface mount I would never use a soldering i
I have been working on a 3D printed stand for my KX2.
I am wondering if some other KX2 users might be interested in a stand..
If anyone would like to see what it looks like,
Email me at n1...@jocusolutions.com and I will send you a couple of
pictures.
Joel - N1JEO
When I first posted this subject, I asked for 6 beta testers,
4 of my prototype battery monitors went out to responders today by USPS
first class. ! more is scheduled to go out Monday.
Thank you all for your interest in my project.
Joel - N1JEO
to go QRT.
I would like to someone would be willing to beta test my device and let me
know your thoughts, pro or con.
I would supply interested operators (up to 5) with a device at no cost.
For more information email me.
Joel Curneal - N1JEO
o heavy (I forget the wire size) cables from my supply to the strip,
thus cutting the cable drop in half on the longest path (my strip was right
behind the equipment). No further issues
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecra
For those who would like to go the attenuator route to allow the 100 W PA to
drive their amp at medium power, Phil Salas, AD5X, defined the parts for a
nice 2 dB attenuator in:
Aug 2010 - QST (Pg. 39)
Simplify Transceiver to Amplifier Interfacing with an In-Line Attenuator
Regards, Joel Hallas
I wonder if the basic K4 will transceive at all on the new bands. Perhaps I
missed that discussion?
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://
es are the
same.
My solution is to tie the key lines in parallel and turn off the power to
the one I am not using. If I forget, they both key, but nothing happens to
the one without drive, as Don notes. I have been doing this for some years
without issue.
Joel Ha
CONFIG were set to SPKR + PH = yes. That would seem to rule out the
speaker amp as the problem.
Anyone experience this, or have any ideas?
Thanks much!
Regards, Joel Hallas, W1ZR
__
Elecraft mailing list
Home: http://mailman.qth.net
The Elecraft team came through. The WOL needs f/w 1.78 (beta) or newer to
function with the KPA1500 Remote and LAN connection.
All is now well!
Regards, Joel Hallas, W1ZR
Westport, CT
Message: 8
Date: Sat, 20 Oct 2018 23:09:59 -0500
From: Scott
To: elecraft@mailman.qth.net
Subject: Re
se Wake on Lan is Disabled". The host connect mode says Wake
on Lan (WON) will take some seconds to awake, but it doesn't.
Does anyone know how to enable WON??
Thanks much!
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecra
config program (1.16.7.25) to force it. I don't think I'm
asking it to do more than it should -- am I missing a crucial step or
setting?
Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/lis
ment)--50 mi NE NYC.
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
better yet, bring cash to my house, by arrangement!
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailt
onal check drawn on US bank -- shipping upon clearance.
Or better yet, bring cash to my house, by arrangement!
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
, and
more peak output, if you're counting.
2. You now have the wiring in place for the KPA-1500, should you be so
inclined some day.
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qt
2010 - QST (Pg. 51)
A Close Look at the Terminated Folded Dipole Antenna
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Many thanks to all who replied! It seems as if there are many sources. Based
on the recommendation of Joe Subich, W4TV, I just ordered from Buxcom
(www.packetradio.com), which had both cable and panel types, as well as some
other things I was looking for.
Regards, Joel Hallas, W1ZR
Westport, CT
and part number
that I can search for, I'd appreciate it.
Thanks!
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
ver is turned off, or is on another band, the input Z can be very
different and result in higher voltage than the spec would predict.
Regards, Joel Hallas, W1ZR
Message: 10
Date: Fri, 30 Dec 2016 18:44:58 -0500
From: Don Wilhelm
To: stan levandowski , Elecraft@mailman.qth.net
Subject: Re: [Ele
Thanks for looking.
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Folks,
For whatever reason, I forgot to add that the KXPA100 *includes* the ATU. It is
a factory-assembled unit and also includes the manuals.
73,
Joel - W4JBB
> On Sep 23, 2016, at 08:37, Joel Black wrote:
>
> Life changes. Interests wax and wane. I'm more interested in
US
shipping only. If you want to call and discuss, call me at 205-535-2070.
Oh, I am keeping my KX3 / PX3. 😜
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qt
I have seen this pop up several times over the past few days. I cannot seem to
find the OP.
My only question - does this originate with Elecraft or the reflector?
Thanks.
73,
Joel - W4JBB
>
>PX3 TO LARGE SCREEN
>
>Feature #1A (preferred). Elecraft to develop an inte
I have lost my mind…
I know I have created macros in the PX3 Utility before and assigned them to
function keys. These are not “text” macros but command macros. I cannot seem to
recall the sequence used to assign those command macros to FN keys. Any
direction would be appreciated.
Thanks,
Joel
, I remember the days
when we were limited to 1000 W dc input -- typically a max of 700 W output
on a good day. My KPA500 can put out an easy 600 W, within 0.7 dB of what I
could only dream of while starting fires with my 811s as a kid who thought
he knew everything
Regards, Joel Hallas, W1ZR
s the size
of a brick, probably costs less and is a much better product, in my view. I
recommend it without reservation.
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/ele
using PF1 for on the KX3.
Just thought you’d find a little humor in my continuing saga of cockpit errors.
:) At least it wasn’t an expensive mistake and if I need more than six macros,
I have the keyboard.
73,
Joel - W4JBB
> On Jul 21, 2016, at 12:10, Joel Black wrote:
>
> The Adaf
standing on it. :)
All I’ve tried so far is Ctrl-Alt-M to see if it would communicate. It
communicates fine. I will try adding macros in the next day or two but I don’t
think there will be any issue.
73,
Joel - W4JBB
__
Elecraft mailing list
Thanks, Don. It was cockpit error. Hopefully I haven’t burned anything up. I
had the KX3 connected to ANT 1 and the antenna selector switch on RF IN. Yep,
I’m feeling pretty small right now.
73,
Joel - W4JBB
> On Jul 20, 2016, at 19:52, Don Wilhelm wrote:
>
> Joel,
>
>
also have a PX3 in the mix)
and make sure I haven’t cabled something wrong. Otherwise, what else can I look
for?
Thanks,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
well to how I want to lay out my
operating position once it’s finished.
Thanks,
Joel - W4JBB
> On Jul 11, 2016, at 05:38, Joel Black wrote:
>
> Wondering if anyone has tried this mini wireless keyboard with their PX3:
>
> https://www.adafruit.com/products/1737?gclid=Cj0KE
; turns AGC back on either FAST or SLOW depending on
the last known setting which means I can just take GT004; out of my second
macro string.
Thanks,
Joel - W4JBB
> On Jul 15, 2016, at 20:44, Bob N3MNT wrote:
>
> If I remember correctly, AGC is set to off automatically in d
When I had a K3, I used the GT command to set AGC off for data modes using
GT000;
I cannot seem to get that to work with the KX3. Is it not available? My reading
of The Programmers Reference implies it *is* available.
Thanks,
Joel - W4JBB
habits.
73,
Joel - W4JBB
> On Jul 14, 2016, at 06:17, MaverickNH wrote:
>
> Summarizing some great offline feedback I'm getting, I can see a few options
> emerging:
>
> 1. Get a loaded K3S/P3
> 2. Get a loaded KX3/PX3/KXPA100 system
> 3. Get a loaded/used K3/P3, wh
cyI-5nqjY4BEiQAijebws3eF9yt7A1so9Xw44_K2fCnlGD2uOQ6gPBS8FtpPMoaAgfi8P8HAQ>
Yes, I know there is a list on Elecraft’s website, but it is not all inclusive
and does not seem to include many “mini” wireless keyboards.
Thanks,
Joel - W4JBB
__
Elecraft m
would be a wonderful solution.
Thoughts? Wayne? I’d let Elecraft use my C5535 as a prototype. :)
Sorry, I’m not a designer, just a user but I’d surely pay for that.
Thanks for the bandwidth and have a great weekend.
73,
Joel - W4JBB
__
Elecra
deal I don’t guess except when you want to check power out without
going, “Hello, test, this is W4JBB.” :)
Thanks and 73,
Joel - W4JBB
> On Jul 8, 2016, at 21:26, Cady, Fred wrote:
>
> That display seems to act differently depending on if you have SSB -CW or SSB
> +CW.
> Chee
Thanks, Bob. Not sure why that was escaping me.
73,
Joel - W4JBB
> On Jul 8, 2016, at 19:24, Bob N3MNT wrote:
>
> Tap keyer/mic to switch CMP/ALC Power / SWR switch auto,automatically on
> transmit.
>
>
>
>
> --
> View this message in context:
> http://
For some reason, I seem to have lost my mind. I attribute it to congenital CRS.
:)
I thought there was some way to easily swap between CMP/ALC and SWR/PWR on the
KX3. Is my rememberer that bad?
73,
Joel - W4JBB
__
Elecraft mailing
I have placed several orders with Elecraft in the past year (the latest
for a KX2 placed on May 23) and have always received an automatic email
response shortly after placing the order.
Joel - N1JEO
On Wed, Jun 22, 2016 at 2:55 PM, Bob wrote:
> Hi Tom,
>
> Last order p
Mike, NF4L, is correct. RUMlogNG is the version to use for daily and
contest logging. I asked that question on the forums and Tom, DL2RUM? (The
author), told me that.
73,
Joel - W4JBB
On Thursday, June 9, 2016, Mike Reublin NF4L wrote:
> RUMLogNG has about 75 pre-defined contests. I th
on me but 2x4s upside my head do. I’m Scots-Irish/Danish and have a *very* hard
head. ;)
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Brian,
I'd like to see it.
Thanks.
73,
Joel - W4JBB
On Monday, June 6, 2016, Brian D. Comer wrote:
> I am not close to my set up now so I cannot send a picture.
>
>
>
> >That first picture reflects one thing I hate about my KX3 and PX3 - when
> you have
>
>
critical. I cannot learn unless you tell
me where I screwed up. I have pretty thick skin. ;)
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
)
KFL3A-2.7k x2 (matched)
KRX3
KBPF3
KTCXO3-1
KAT3
MH2
Asking $2100 +shipping & insurance
I also have all the original manuals and a Fred Cady K3 printed (mostly color
as my printer was running out of ink but still quite readable) book from 2011.
US sales only please.
73,
Joel - W
myself; today, I’m quite pleased with
the PX3 - fickle lot, aren’t we?
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
side of the carrier. The span is set to 50 kHz.
Any certain way I’m supposed to “hold my mouth” or “stick out my tongue” while
I do this? :)
I’ll bring home a service monitor from work tomorrow and hope it tunes down as
low as I need it to go.
73,
Joel - W4JBB
Thanks, Don. That’s what I needed to hear.
73,
Joel - W4JBB
> On May 28, 2016, at 15:52, Don Wilhelm wrote:
>
> Joel,
>
> Ham and consumer "condenser" microphones should not be subjected to 48 volt
> phantom power. That is for professional microphones which ne
Would I be better off just adding a mixer?
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hoste
, you can
send them directly to me.
Oh, yep, I’m still looking for a used PX3 from a smoke-free home in great
condition ;)
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
ill consider these offers first.
I also have all the manuals and a Fred Cady K3 printed (mostly color as my
printer was running out of ink but still quite readable) book from 2011.
For now, I’d much rather ship CONUS.
73,
Joel - W4JBB
___
Looking to buy a PX3. Must be in great condition and from a non-smoking home.
Please send pictures and price to:
joelbbl...@gmail.com <mailto:joelbbl...@gmail.com>
Thanks,
Joel - W4JBB
__
Elecraft mailing list
Home
Good grief… I left off that I enjoy my SKCC membership too. So, add CW to the
list of modes. Not sure where my mind is / was.
73,
Joel - W4JBB
> On May 13, 2016, at 15:02, Joel Black wrote:
>
> I am seriously thinking of selling my K3/P3 combo and just using my KX3 (and
> purcha
. Please reply direct to joelbbl...@gmail.com
<mailto:joelbbl...@gmail.com> to keep list volume down.
Thanks,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmf
omething in the
MENU settings?
Regards, Joel Hallas, W1ZR
Westport, CT
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This
I wonder if it would be feasible to have more macro buttons in a future F/W
release. Perhaps using the one of the PF buttons to put the radio into “macro”
mode and use the number buttons for the macros?
Just a thought. Don’t know if it’s possible or not.
73,
Joel - W4JBB
g the foot
switch around.
The K3 VOX is second to none, IMO, but as I tend to cuss out interfering
stations, I'm afraid I'm not a good VOX candidate!
Regards, Joel Hallas, W1ZR
Westport, CT
--
Message: 3
Date: Sat, 16 Apr 2016 13:34:50 +1000
From: Mike
You know, I think the first KX3 I built had that same issue. Mine was because
of some extra PCB material left on the PCB but I thought that issue had been
resolved.
Regardless, I’d wait and see what the tech support folks say.
73,
Joel - W4JBB
>
> On Sat, Apr 9, 2016 at 5:03 AM, P
the total width is 13 1/2”. I think I
added up 13.3” but my measuring stick does 32nds not 10ths. :) If it turns out
okay, I’ll provide pictures.
Is this what happens when you approach 50? You start waning anecdotally?
Thanks for the bandwidth.
73,
Joel - W4JBB
front. It also has a separate headphone stereo
monitor that can be turned on and off with volume adjustment. The adjustments
right on the front of the Focusrite make operation very easy.
73,
Joel - W4JBB
> On Mar 6, 2016, at 16:51, Tom Field wrote:
>
> I’ve looked at the L-pan site
Deane,
I have discovered the same. It kind of acts like an SWR meter put *after* a
tuner.
If I use a resonant antenna or transmit into my dummy load, I don’t get these
squirrelly readings.
73,
Joel - W4JBB
> On Feb 21, 2016, at 6:23 PM, Deane Walkington
> wrote:
>
> I h
that route? I’d
have to build a new cabinet with rack rails, but I have been considering
building a new set of shelves for my amateur equipment anyway. Any other
gotchas I need to consider?
Thanks,
Joel - W4JBB
> On Feb 17, 2016, at 5:28 PM, Joel Black wrote:
>
> Here’s the potential
use that to
feed the MIC IN of the KX3?
I realize this borders on off-topic for this group so if you’d rather respond
directly, I understand and I apologize for using the bandwidth for what may
seem like an off-topic subject to some.
73,
Joel - W4JBB
Ray,
I don’t think it will. I think cocoaModem will allow two receivers, but I don’t
know about Fldigi.
Best place to ask, though, is on the linuxham Yahoo Group.
73,
Joel - W4JBB
> On Feb 13, 2016, at 8:59 AM, Gmail wrote:
>
> How do I set up FLDIGI Mac to decode the main and sub
Disregard my previous email. Apparently, the third time was the charm. I was
able to complete the Extended VFO Temp Compensation finally.
Thanks,
Joel - W4JBB
> On Feb 9, 2016, at 2:03 PM, Joel Black wrote:
>
> I’m missing something here…
>
> I am following the procedur
am going to go through the procedure again and triple check that I didn’t
miss anything.
If anyone knows or remembers if the CWT indicator should not be there, that’s
fine. It’s just that what I’m seeing and what’s in the procedure are not
matching up.
Thanks,
Joel - W4JBB
think the ringing on transmit was from me overdriving and hearing both
the transmit audio and monitor audio at the same time on the sound card. With
the transmit audio now set correctly, I no longer hear the ringing I was
hearing previously.
Thanks again for the help and advice.
73,
Joel - W4JBB
,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
Is there some kind of switch or other device available to easily swap between
voice and data on the KX3?
My GoogleFu skills are apparently not very good. I get all kinds of links on
data or voice but I cannot seem to find exactly what I’m looking for.
Thanks,
Joel - W4JBB
JT65 and JT9 with
this sound card with around -26 to -27 decodes.
Do not bother purchasing if you’re using OS X 10.11. It won’t work. I’m asking
$75 plus shipping or best offer.
Please reply direct.
Thank you for the bandwidth.
73,
Joel - W4JBB
Thanks, Don. That version fixed the copy-paste issue.
73,
Joel - W4JBB
> On Jan 2, 2016, at 3:17 PM, Don Wilhelm wrote:
>
> Joel,
>
> It may not be your computer at all. The current production K3 Memory Editor
> has a problem with Paste.
> Dick N6KR posted a link to
rebooting to my Win10
partition in BootCamp. Perhaps it is a Win10 issue? I do not have a Win7
machine that I can try.
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
convinced myself that the K3SYNA upgrades are
useful to me and my casual operating. I would have liked to gone with the KIO3B
except for the price point (about which I am *not* complaining - it is what it
is).
Regards,
Joel - W4JBB
> On Dec 26, 2015, at 7:30 PM, Edward R Cole wrote:
>
&
George,
I’m in the same boat. I like digital modes and wanted to be able to watch my
ALC and VSWR at the same time. The P3TX Monitor was less expensive than the W2
wattmeter and it kept me from having to add a box to my shack.
Except for a few frequencies, I really like it.
73,
Joel - W4JBB
based on my own experience just the past
couple of months.
73,
Joel - W4JBB
> On Dec 5, 2015, at 4:27 PM, ab2tc wrote:
>
> Hi Joe,
>
> I don't share your pessimism about the future support of the USB devices (2)
> presented by the K3S. These are standard USB audio and co
uctant to purchase the new KIO3 when it comes available for my K3.
73,
Joel - W4JBB
> On Nov 13, 2015, at 9:17 PM, NN8B wrote:
>
> How about making an internal sound card for the KX3 that would fit in the 2M
> radio slot. The connection would probably be a USB connection with a com
&
KX3 program and Macro 2 goes into the
Macro 2 slot. Macro 1 will load on the first long press of the PF1 button and
pre-stage Macro 2. The second long press will execute Macro 2. It can be
configured with different modes, power settings, split settings, etc.
73,
Joel - W4JBB
> On Nov 12, 2
Thanks for all the suggestions.
The reason for wanting them is so I only have to use one set of headphones and
CW key between my K3 and KX3. I guess I’m just lazy - I could just disconnect
and re-connect depending on what rig I want to use. :)
Thanks again.
73,
Joel - W4JBB
> On Nov 7, 2
er for mic / headphone.
Problem is, mic is just TR. I need TRS on each male connector.
I realize I may have to resort to making something, but it would be easier to
just buy something like that.
Have any of you seen anything like what I’m describing? I’m coming up empty.
73,
Joel -
cost?
Although this would be nice to have,
http://www.jrmiller.demon.co.uk/projects/ministd/frqstd.htm
<http://www.jrmiller.demon.co.uk/projects/ministd/frqstd.htm>, something
significantly less would be better. At the current exchange rate, this device
is close to $500.
Thanks,
Joel -
Thanks to all who responded. It sure cleared it up for me. It was explained
very well.
73,
Joel - W4JBB
> On Oct 16, 2015, at 6:18 AM, Joel Black wrote:
>
> I will try to do this as concisely as possible so no rabbit trails are run…
> I’ll try by stating below are the conditions
lower than that, I wouldn’t get any output. Now (this morning), If
I set for *minimum* ALC (no bars, but not zero), I still get output. I do not
remember this being the case but I could be wrong.
Current firmware in the K3 is 5.35.
Thank you.
73,
Joel - W4JBB
Subject line tells it. The 2 m transverter should be the one compatible with
the installation of the ATU.
Does anyone have either they’d be willing to sell?
73,
Joel - W4JBB
P.S. Apple Mail wants to spell check transverter to transporter. I wish I could
buy a transporter
mag loop. I
could take the mag loop portable with me if I wanted.
I’m just looking for some advice and if y’all think this is too far off topic,
please respond directly.
Thanks.
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http
Is there some place from which I can purchase the mic holder “ring” that
attaches to the MH3? I’m not talking about a hook you mount on a shelf or
something, but the actual ring that goes on the MH3 itself?
Thanks,
Joel - W4JBB
the KIO3B with OS X 10.11? If so, what have you found?
Does the KIO3B work in OS X 10.11? Does it use the same audio chip as the
IC-7200 and/or the TS-590?
Thanks,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
/gp/product/B00FR795WA?psc=1&redirect=true&ref_=oh_aui_detailpage_o04_s01>
I do *not* try and run my external sound card through it.
73,
Joel - W4JBB
> On Sep 7, 2015, at 5:40 PM, David Ahrendts wrote:
>
> Many thanks for the half-dozen direct responses off list. Most of you run a
Any word yet on the audio NF of the K3IOB?
Does the K3IOB output a stereo signal for use with the second receiver?
Thanks,
Joel - W4JBB
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
that) in the rain. Luckily, the seller had wrapped the book in plastic a
couple of times so we took no damage.
I would’t ship an anvil with DHL afraid they’d find that magic rubber mallet
and break it!
Back to your regularly scheduled Elecraft information.
73,
Joel - W4JBB
answer and want to hi-jack my message, please give me the
courtesy of changing the subject line so I don’t spend time reading. Yeah, I’m
still a little ticked about the last one.
73,
Joel - W4JBB
__
Elecraft mailing list
Home: http
Windows machine.
Unfortunately, I have to use Win7 at work and I *hate* the way it does things.
73,
Joel - W4JBB
> On Jul 10, 2015, at 6:37 AM, Byron Peebles wrote:
>
> With my migration from TenTec to Elecraft, I was planning to also move my
> logging and station control fro
on HF down to -25 to -26. I just recently
modded a SignaLink USB and and decoding down to a -23 (so far).
I guess my thoughts are that if the KIO3B has a comparable NF, I’ll just get
rid of all my external devices and further consolidate into one piece of
equipment.
73,
Joel - W4JBB
1 - 100 of 324 matches
Mail list logo