Hello all..This AM on 160 meters there was a station CQing on 1.820.6 with
a fundamental freq signal strength of S9 on my K3. I also found (with the NB
on) that I could hear him Q5 but very weak on 1.810.6 and the same S 0 reading
but perfectly Q5 on 1.830.6. I turned the noise blanker
the NB for anything at this
previously dead quiet location.Any ideas on what settings I should use or
try for this electric fence noise? Possibly the settings that I am using are
too aggressive and would cause this?
Regards
Larry K1UO
I have a K3/0 and remote K3 setup using the RemoteRig boxes from Elecraft.
SSB/CW is fine. When I switch the K3/0 to DATA mode and set up the onboard
text decode and FSK to 45Bps . I get nothing but gibberish.. There is NO
decoding possible for RTTY and the CW-RTTY does not key the remote
Got the CONFIG: SYNC DT off finally...Thanks so much. RX Signal levels
on RTTY are S9+..still gibberish decode over the Remote system?
-Original Message-
From: Wayne Burdick
Sent: Sunday, February 08, 2015 2:43 PM
To: Larry - K1UO
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K3
I should also mention we are using Fiber to the home for Inet here and 10MB
DSL link at the remote
Typical ping times are 50MS range and Latency range is usually 10-20 range
and Jitter 0-4 range usually 0 as it was a moment ago when tested.
Not sure why RTTY decode is a problem using the
Looking for a K3 to pair with my K3/0 and RemoteRig. Private email what you
might have.
k1uo at arrl dot net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
On Dec 23, 2014, at 7:15 PM, KG5EJU kg5...@dlaab.com wrote:
Very new to Elecraft, just own a W2, but looking long at the KPA500. Heard a
couple rumors that a 1000 Watt unit was coming….
Not. Keep those ideas coming :)
73,
Wayne
N6KR
Just buy their new kpa ‘COMBINER’ and add a second KPA500
If you replaced your K3/0 with a K3/0 mini, or are not using your K3/0, I may
be interested in purchasing it. Actually interested in the K3 mini if you
have one and are not using it.
I am looking for the K3 control RRC and cables as well.
Regards
What is the difference between the Remote Rig number for the K3 – Twins on the
RRC Website RRC-1258 MKII’s and the Remote Rig units for remoting the K3’s
that are designated RRC-1256 in all the Elecraft literature?
__
Elecraft mailing
K1UO
-Original Message-
From: Mitch Wolfson DJØQN
Sent: Monday, December 22, 2014 6:37 PM
To: Larry - K1UO ; Elecraft Reflector
Subject: Re: [Elecraft] [K3] Remote Rig number difference?
The 1258's are the RemoteRig RRC's required for remote operation, the
1256's are Webswitches
New Optional KPA500 to K3 Aux cable kit P/N KPAK3AUX. Never used still in
bag. $25.00 shipped CONUS only. k1uo (at) uninets (dot) net. Reply offline
please.
__
Elecraft mailing list
Home:
Well...did Elecraft release their KPA-CO1 Amplifier Combiner for combining two
of their KPA500’s at Dayton? LOL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
If anyone is considering selling/upgrading their KPA500 please contact me
offline.
call (at) arrl (dot) net
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
Since a KPA-1000 or KPA-1500 have not come to fruition..how about making a
Elecraft KPA-500 Combiner for stacking either two or three KPA 500's? Sell more
KPA500's as required to go with the RF Combiner
__
Elecraft mailing list
Home:
excellent condition, latest firmware, original owner, purchased last Fall.
$750.00 + shipping.
Please inquire off line.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FOR-SALE-P3-F-e-w-SVGA-option-tp7565194.html
Sent from the Elecraft mailing list archive at Nabble.com.
All are spoken for - thanks all.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Accessories-for-sale-tp7157105p7159027.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
I have a XG2 and a PR-6. please contact off list if interested
k1uo at uninet dot net
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Accessories-for-sale-tp7157105p7157105.html
Sent from the Elecraft mailing list archive at Nabble.com.
The PR6 is spoken for... thanks
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Accessories-for-sale-tp7157105p7157184.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
and I didnt see much if any difference when
switching the relay in and out manually.
curious now as to what I am seeing.
Thanks,
Larry K1UO
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Change-in-the-P3-noise-floor-tp7104135p7104135.html
Sent from the Elecraft mailing list
with the pc
or serial port one cannot even change antennas. The software and
documentation seem to have not fully caught up to use the KRC2 with a K3 and
various remote relay switch boxes.
Just thinking out loud.
73
Larry k1UO
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3
For Sale: Fully Loaded K3
I have a factory assembled K3 and accessories. I am the original owner,
unit is in excellent condition (10 of 10) and was delivered to me at the end
of Dec 2008. It has been factory updated with all Elecraft hardware
changes and latest software. K3 was
I worked them during the qrm height of the CQ160 contest, using a K3 of
course, but even that would not have been possible without propagation
existing like Bill said.Best propagation to the NE region appears to be
around the 0400 to 0500 time frame although they have been heard and worked
I have a new factory assembled LP-Pan with built in preamp for use with the
K3. Also a nearly new E-MU 0202 Sound card and all connecting cables to
plug and play with your K3. $280 firm...shipped CONUS only.
k1uo (at) arrl.net
--
View this message in context:
as 3 weeks ago and I have NO idea
what has changed.Just reloaded the K3 firmware and checked all MTTY
option parameters but all look good and as I mentioned..Data A xmits the
RTTY signals but not AFSK.
Larry K1UO
--
View this message in context:
http://elecraft.365791.n2.nabble.com/AFSK
anyone got an emu-0202 sound card they want to part with?
thanks
Larry K1UO (at) uninet.net
--
View this message in context:
http://elecraft.365791.n2.nabble.com/emu-0202-sound-card-tp5717103p5717103.html
Sent from the Elecraft mailing list archive at Nabble.com
Factory built P3 Panadapter for K3 with latest firmware and all cables,
manual. $650 shipped CONUS.
direct inquires only please ...to k1uo (at) uninet.net
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-P3-F-tp5653063p5653063.html
Sent from the Elecraft mailing
P3 is SOLD . Thanks
--
View this message in context:
http://elecraft.365791.n2.nabble.com/For-Sale-P3-F-tp5653063p5653385.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
Ross the only way I can simulate that behavior on my P3 is by disconnecting
the P3 to K3 cable. Doing so causes the bootloader screen to come up
immediately when trying to do a ref lvl adjustment. You may have a loose
cable or pin not making connection?
Larry K1UO
Ross-33 wrote:
Jim
Bill,
I can tell you that just last night, on 160 meters, I copied 2 very weak
stations perfectly Q5 that did not show on the P3 waterfall. Now, Its
entirely possible its my adjustment skills but I dont think so. Yes..the K3
IF Mod was factory installed. This has happened more than
Hi Alan,
Ill admit I didnt try a narrower span and I normally use the +-15Khz
setting (30Khz span) on the 160 meter cw band. Ill try narrowing it up and
see if it picks up the very weak signals but I dont want to operate on a too
narrow span or, as they say, it becomes much less useful to
Is the P3 manual posted yet? if not, is it expected to be available soon?
--
View this message in context:
http://elecraft.365791.n2.nabble.com/P3-Owners-Manual-tp5156358p5156358.html
Sent from the Elecraft mailing list archive at Nabble.com.
Back around the Dec/Jan 2010 timeframe someone was writing a pc control
program dedicated for pc control of the K3 and was offering a free trial
period to solicit input/changes etc. until the final $commercial$ version
was ready sometime around March of this year. I can't find the software
info
Whats really needed in a new amplifier would be a nice 6 Meter Solid State
amp from Elecraft to match up with the K3. Maybe something in the 500-800
watt range.
--
View this message in context:
http://n2.nabble.com/Elecraft-Amps-tp4558598p4560802.html
Sent from the Elecraft mailing list
Larry K1UO wrote:
Whats really needed in a new amplifier would be a nice 6 Meter Solid
State amp from Elecraft to match up with the K3. Maybe something in the
500-800 watt range.
Let me clarify...A 6M amp only... not as p/o the existing 160-6 amp
selections currently available
would rely
on the K3 band data provided to the amp rather than rf sensing.
73 and good luck
Larry K1UO
I am considering the Expert amplifier because of instant turnon, smaller
size and reduced weight. Does the Expert amplifier require a tie in to the
transceiver other than RF input and key
when all else fails..reload software!! Seems it does sometimes get tired
8^)
Larry K1UO wrote:
I initially set up my K3 quick memories to store CW and SSB info and also
set up keys 1-9 for quick band changes to CW or Phone.
normally when on a band, if I wanted to save additional band
Let me try and clarify. When I wanted to save some parameter setup on a
particular band, I used VM to save the info in the M1 or M2 keys for a
quick update of band information. Now when I use
that function all I get is memory position 00 displayed. Nothing I do gets
me back to the M1-M4 and
by pressing VM and the appropriate memory key. I go
straight to the selectable memory bank instead.
Hope thats clear?
73
Larry K1UO
- Original Message -
From: Julian, G4ILO [via Elecraft]
To: Larry K1UO
Sent: Sunday, November 01, 2009 7:52 AM
Subject: Re: [Elecraft] M1-M4
New condition Elecraft special edition Hexkey s/n E433 for sale $150 plus
ship (probably $7-8 USPS Priority) contact offline if interested.
Larry K1UO
--
View this message in context:
http://n2.nabble.com/FORSALE-Elecraft-Hexkey-tp3924002p3924002.html
Sent from the Elecraft mailing list
--
View this message in context:
http://n2.nabble.com/Hexkey-is-SOLD-Thanks-tp3924299p3924299.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
I initially set up my K3 quick memories to store CW and SSB info and also set
up keys 1-9 for quick band changes to CW or Phone.
normally when on a band, if I wanted to save additional band info,I could
hit V-M and have M1 appear in place of the second vfo window...now I get a
memory number
K1UO
Sent: Tuesday, July 07, 2009 12:21 PM
Subject: Re: [Elecraft] E-Ham listing of KPA1500 gone
Difficult to solicit reviews on a product that doesn't exist. ;o)
-Original Message-
From: Larry K1UO [mailto:k...@...]
Sent: Monday, July 06, 2009 1:35 PM
To: elecr
the KPA-1500 listing on the Amplifier review page is gone..KPA800 listing
remains...An omen?
--
View this message in context:
http://n2.nabble.com/E-Ham-listing-of-KPA1500-gone-tp3214738p3214738.html
Sent from the Elecraft mailing list archive at Nabble.com.
the speaker on/off with a simple push of the PF key!
73 Larry K1UO
--
View this message in context:
http://n2.nabble.com/K3-firmware-and-AGC-question-tp2734329p2737532.html
Sent from the Elecraft mailing list archive at Nabble.com
I'm glad you asked Toby but I think we will have to wait until Dayton to see!
8(
Hopefully the amplifiers availability are announced then as I did plan on
ordering
the KPA1500 for sureSeems like something will come of them...the initial
introduction
of the amplifiers came at Dayton 2
Hi Ken,
The Panadapter would be ok also!!!
73 Larry K1UO
- Original Message -
From: Ken Kopp-3 (via Nabble)
To: Larry K1UO
Sent: Wednesday, April 01, 2009 1:39 PM
Subject: [Elecraft] What is the status of Elecraft's power amps
Perhaps they ... or better yet
I also have confirmed on K3 #921 the behavior described by KB8AP below.
This radio was recently received from the factory 12/20/08 with MCU Version
2.73 installed.
VOX is on when bandswitching and no 6K filter is installed so I do get the
ERR TXF along with a 1 sec or so transmit light.
--
VOX is on when bandswitching and no 6K filter is installed so I do get the
ERR TXF along with a 1 sec or so transmit light.
Make that MODE switching from DATA to AM ...Not bandswitching.
--
View this message in context:
Brad Johnson-11 wrote:
I've received several responses regarding the mystery part, most of which
are associating it with the speaker shield.
I'd hang on to it Brad...might go to Eric's cup holder! 8^))
--
View this message in context:
--
View this message in context:
http://www.nabble.com/New-Ke-and-KRX3-ship-info-posted-tp18145652p18145652.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a
Oops...make that K3 info!...Never was good at hitting the right number keys.
Larry K1UO wrote:
--
View this message in context:
http://www.nabble.com/New-K3-and-KRX3-ship-info-posted-tp18145652p18145676.html
Sent from the Elecraft mailing list archive at Nabble.com
DOUGLAS ZWIEBEL wrote:
Just tattoo this onto your forearm - if the PA Temp is under 100F,
don't worry about it.
F C
200 93
195 91
Sorry Dougno more roomthe resistor color code is already there 8^)
--
View this message in context:
Forbidden
You don't have permission to access /elecraft@mailman.qth.net/maillist.html
on this server.
Apache/2.2.4 (Ubuntu) mod_python/3.3.1 Python/2.5.1 PHP/5.2.3-1ubuntu6.3
Server at www.mail-archive.com Port 80
I would willingly pay a lot for a K3 in a 19 case.
Simon Brown, HB9DRV
I think you just described the beginnings of a K4 8^)
--
View this message in context:
http://www.nabble.com/The-K3-in-comprison-to-the-Big-Guns-tp17267266p17272252.html
Sent from the Elecraft mailing list archive at
So Lyle... How is the testing going on the second receiver for the K3? Any
showstoppers that will further delay distribution?
73
Larry K1UO
--
View this message in context:
http://www.nabble.com/2nd-rcvr-testing...-tp16850993p16850993.html
Sent from the Elecraft mailing list archive
Todd Gahagan wrote:
I guess I had better go with the flow and announce this.
I received my Katiegram today 04-09-08. Order placed 10-22-2007.
One of the nicest email I have ever received!!
___
Send it back You are way ahead of
The PAR 6M antenna is the one I was after also Dave, but due to Government
contract overload..Dale at PAR Electronics has suspended all amateur antenna
manufacturing untill further notice! Dale told me it would most likely be
into Fall before resuming any amateur antenna work.
73,
Larry K1UO
on how the prototype KPA-1500's are
doing.. he asked TIC!
keep up the great efforts.
Larry K1UO
--
View this message in context:
http://www.nabble.com/K3-SubRX-Photo--tp16144964p16144964.html
Sent from the Elecraft mailing list archive at Nabble.com
.
YMMV
Larry K1UO
--
View this message in context:
http://www.nabble.com/Re%3A-Printoing-Manuals...-tp15920710p15922152.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must
,
Take a look at either the End Fedz or Buddi Pole portable antennas.
Possibly one of those may suit your needs. Good luck
Larry K1UO
--
View this message in context:
http://www.nabble.com/Portable-Antennae-tp15764570p15766866.html
Sent from the Elecraft mailing list archive at Nabble.com
Members can print out the 3 page review from the ARRL web site.
--
View this message in context:
http://www.nabble.com/ARRL-K3-review-for-Apr-QST-posted-tp15743968p15743968.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
Elecraft
Congrats Larry...Now that Panadapter project can really be fine tuned!
Larry Phipps wrote:
I received my email Wednesday night, and my K3 shipped Thursday (ordered
4-30, no deposit). Another guy received his notice Wednesday night as
well, and his shipped Friday (ordered 5-5, no deposit).
Also of note on the shipping update page is this reference regarding prior
prepaid orders...
In any case, this crossover point will occur by the end of this week's
shipments, 1/25. After 1/25 we will ship all remaining orders in the order
they were received. Production is continuous from
joshLO wrote:
When is the KRX3 sub receiver for the K3 going to be available???
Josh n7xm
Not sure Josh but the backorder status was just changed today from
01/31/08 to just DELAYEDopen time frame now...no explanation given as to
why.
Larry K1UO
--
View this message in context
(If you're of a certain age, remember the mnemonic
LSMFT - Low Space Makes Fine Teletype.)
I thought LSMFT meant Lucky Strike Means Fine Tobacco? ;^)
Sorry...carry on!
--
View this message in context:
My vote would be for the Proset with H4 element for Contesting/DXing use.
Second would be the Proset Plus what contains both the HC4/HC5 elements but
is a bit heavier and more tiring to wear for long periods.
(consider the Heil footswitch also!)
Most of all thanks for asking.
73, Larry K1UO
Richard Kent wrote:
Maybe there was another
answer all along we did not know it. Maybe the popularity of the CB band
has
dwindled to the point that it is not the hot spot we remember.
or maybe the FCC will give us back the 11 meter band that used to be a Ham
band!
yeahright !
Got the cover...now need the radio!!
http://www.nabble.com/file/p14363190/Elecraft%2BK3%2BCover.jpeg
--
View this message in context:
http://www.nabble.com/K3-dust-cover-tp14363190p14363190.html
Sent from the Elecraft mailing list archive at Nabble.com.
Can someone tell me where to get a 12X12 X5 fiberglass bulkhead cabinet for
mounting to the outside wall for bringing in coax, cables etc and possibly
has a copper or aluminum plate for mounting lightening protection devices
just before entering the shack wall? Apparently I'm not using the
Thanks all who responded...I now have about 4 good sources to check out their
product... If anyone else needs a little prod in the right direction as I
did, please e-mail me direct.
73, Larry K1UO
--
View this message in context:
http://www.nabble.com/OT%3A-Source-for-fiberglass-bulkhead
I've read the product description for this Headset on the Elecraft site but
still don't know which element is in the Heil Proset K2is it the HC4 or
HC5?
--
View this message in context:
http://www.nabble.com/Which-element-in-Proset-sold-by-Elecraft-tp14224186p14224186.html
Sent from the
71 matches
Mail list logo