I've been having a lot of fun with the K3Y event using my K3 at 100 watts.
Have kicked in the KPA500 a few times when I have to. Currently at 15 K3Y
areas confirmed with 47 of the total 91 slots.
73, Bill NZ0T
--
Sent from: http://elecraft.365791.n2.nabble.com
Mint 17.3 and the K3,KPA500 and W2 Linux utilities provided by Elecraft work
well. I use WINE to run the W2 interface program because it is only
provided in Windows.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New-shack-PC-tp7616500p7616525.html
Sent from the
not work on
the PI and I use it to run the W2 wattmeter software which is not available
in Linux.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Logging-Programs-tp7614653p7614726.html
Sent from the Elecraft mailing list archive at Nabble.com
GenLog is for Windows but runs well in Linux using WINE. Good contest
logger. I have not been able to get the K3 memory editor to work using WINE
however.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Switching-to-Linux-tp7612946p7612982.html
Sent from the Elecraft
normally except for the left speaker staying on when it shouldn't. I have 2
speakers set in the menu and am using firmware 5.38.
Ideas?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Speaker-question-tp7612832.html
Sent from the Elecraft mailing list archive
I have MS.Net installed but I think it may be that I am 64 bit but K3 EZ is
32 bit. I'll keep working on it.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-EZ-tp7611355p7611461.html
Sent from the Elecraft mailing list archive at Nabble.com.
flash
of a loading window but then it disappears.
Any help?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-EZ-tp7611355p7611442.html
Sent from the Elecraft mailing list archive at Nabble.com
I bought and built K1 SN 3353 last week. I have 30 and 40M on it and having
a ball with it. Very capable little radio!
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K1-K1-still-a-great-QRP-radio-tp7598016p7598065.html
Sent from the Elecraft mailing list
I found a 0.47uf cap in my junk box and replaced C31 with it. I've not had a
chance to have a QSO yet but just listening around I hear a big improvement.
Thanks all for your comments!
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K1-AGC-mod
transmission it
would help. From perusing the net it looks to me like the most common mod
involves replacing C31 on the RF board with a 1uf and C67 on the same board
with a .22uf. Is this the best mod or are there others that I should look
at?
73 Bill NZ0T
--
View this message in context:
http
I participated in the CQ 160 CW contest this weekend which was my first
contest after loading Beta 5.04. The changed QSK was very evident and
greatly reduced listening fatigue! Thanks Elecraft.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/5-04-and-CQ
I had the same problem with my 2008 sn 1502 K3. I tried cleaning the
contacts with no luck. Elecraft sent me the gold replacement contacts free
and after I installed them the problem has not returned. Not hard to do but
a bit tedious.
73 Bill NZ0T
--
View this message in context:
http
Tom,
The issue was that I had the W2 interface running fine in Wine but could not
get it to connect to my computer. Several people responded here and were
very helpful but it was Martin DM4IM who sent me this which was easy to
read, understand and accomplish:
Hello Bill,
try this:
Linux handles
My fervent thanks to all who responded with help. The interface is working
under Wine and the Linux version of the utility is connecting also. If you
are at the Joplin, MO hamfest this weekend come by the Elecraft table and
say hello.
73 Bill NZ0T
--
View this message in context:
http
and really struggling with this. Can anyone please give me a simple
(hopefully) step by step procedure on how to get the cable recognized and
working under Wine?
Thanks in advance!
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Need-help-with-FTDI-USB
for
the K3. Can anyone help me with a (hopefully) simple step by step procedure
that will get these USB connections working? Until I can get the K3 and W2
talking to Linux I don't want to make the big change on the old gateway.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791
seen heavy use since. This is the first
significant problem I have had in nearly six years.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-strange-power-surging-behavior-tp7590991p7591002.html
Sent from the Elecraft mailing list archive at Nabble.com
service and support as always!
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-strange-power-surging-behavior-tp7590991p7591030.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
was not affected at all and I hope this problem is not some delayed thing
from that strike!
An ideas? The rig is almost six years old - maybe I need to open it up and
make sure screws are all tight?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-strange-power
is
working fine as far as I can tell. I recently loaded the latest Beta
firmware 4.83 but otherwise have made no changes.Have I just not noticed
in the over five and a half years I've owned the rig or should I worry about
this?
Or am I just getting old and can't remember? :)
73 Bill NZ0T
I've been using N3FJP AClog with my K3 for over 5 years. Just do as posted
above in the settings menu. It's just a matetr of matching the baud rate
more than anything else. All the other settings match the K3 defaults and
just make sure you have the baud rates matched.
73 Bill NZ0T
--
View
I don't always keep the utility up but it's very useful when using an antenna
tuner or amplifier because of the increased resolution.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/W2-users-tp7575281p7575285.html
Sent from the Elecraft mailing list archive
Very happy with my W2. I have the 2KW coupler. Seems pretty accurate and
the LED display is great for casual use. I don't always keep the display up
on the computer but it's very useful when greater resolution than the LED
display is desired.
73 Bill NZ0T
--
View this message in context
repair
several times so I would advise staying away from that brand.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Power-Supplies-for-K3-tp7575122p7575196.html
Sent from the Elecraft mailing list archive at Nabble.com
Call or email Kenwood customer service. I'm sure they will reply right away
-especially on a weekend.
Sorry, just couldn't resist.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA500-and-KAT500-with-Kenwood-tp7572004p7572017.html
Sent from the Elecraft mailing list
I love my K3. It's the best rig I've ever used, let alone owned. But the
auto notch is a weak point. Yes, it does find and eliminate carriers but it
introduces significant distortion. The manual notch is superb and does not
introduce any distortion so that's what I use. What is perplexing to
if it
would be compatible with small displays.
73 Bill NZ0T
On Wed, Mar 6, 2013 at 8:44 AM, Harlan [via Elecraft]
ml-node+s365791n7570878...@n2.nabble.com wrote:
Thanks to all who sent me a copy Looks like an interesting project.
But with the complete K-line control from one computer app. Hmm
(likely true for digital). AM allows an air controller
or other aircraft to hear an emergency call when another station is
transmitting. Based on my experience, I have no reason to doubt his
conclusion.
73, de Nate, N0NB
Nate, that is exactly the reason AM is still used for aviation.
73 Bill NZ0T
Well, dammit, the W2 window has reverted to being stuck in the upper left
hand corner of my Acer Aspire One again! I have tried everything I can
think of in the display portion of control panel even going to no desktop
(solid blue) and also trying the Windows XP theme which worked yesterday.
as I could move it about. I have not changed any settings on the Acer
that I can recall. The netbook is an Acer Aspire One D255 running XP. I'm
using Firefox if that makes any difference.
Any ideas?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/W2-Interface
Changing from always on top and back makes no difference. I agree that it
must be something in the Acer display but I can't figure out what it could
be for the life of me.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/W2-Interface-Question-tp7567872p7567881.html
Sent
Found the problem! Not sure why this worked but I changed my desktop in
control panel/display and that cleared it up. Must have been something with
the size of the picture I was using as my desktop.
--
View this message in context:
I would like to hear opinions on if it makes any difference to configure the
KPA-500 for 220 volts? Is it any more efficient? Seems to me that 110
would be the way to go for portability as long as efficiency is the same or
nearly the same.
73 Bill NZ0T
--
View this message in context:
http
was generally considered to be a copy of the K3.
But that's OK as Elecraft is doing very in a bad economy and I selfishly
would rather have them spend money on product development and improvement
rather than on advertising to the general ham population.
73 Bill NZ0T
--
View this message in context
I just downloaded 4.51 and before I start messing around with changing
settings can anyone recommend a good starting point for general use?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Recommended-AGC-settings-for-4-51-tp713.html
Sent from the Elecraft
I has an Astron RS-20 that worked great fo 20 years. The only problems I had
were the loosening of the big cap screws and the need to replace the LM723
once. On the other hand I purchased a new RS-35M last January and last week
it decided to stop putting out any DC voltage. Something on the
crisis
of the 70's.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/A-Success-Story-tp7505878p7506536.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http
helpful. I don't know if it's
the highly decentralized (but highly communicative via the internet)
organization or just a top-down attitude but I think many organizations
could learn a lot by studying Elecraft.
73 Bill NZ0T
P.S. Does this post get me anything free or at a dep discount ?
--
View
The KAT3 is an excellent internal tuner and if you don't plan on ever having
an amp why not get one? If not there are a lot of good tuners out there. I
would look for an L network tuner as they are more efficient and more broad
banded than the differential T units out there. For high power work
I have had distortion with Auto Notch going back more than a year. I don't
remember which firmware update changed it but it's bad enough that I don't
use it anymore. I use the manual notch instead. I have mentioned this in
the forum but doesn't sound like a lot of others notice it but the
use
the manual notch instead. I'm primarily a CW op but my SSB use is for local
nets on 75 meters and with a group every night on 160 phone and those are
bands that Auto Notch would be very handy to have!
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Auto
I'm looking at linear supplies and the MFJ-4035MV looks like a good value.
Has anyone used one? Thoughts?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/MFJ4035MV-power-supply-anyone-used-one-tp7216724p7216724.html
Sent from the Elecraft mailing list
Phil, which firmware version are you using? I was using the beta 4.47 and
I developed audio problems the other night, After I deleted 4.47 and went
back to the latest production firmware all was fine. Sorry if this has
already been discussed - I just read this thread.
73 Bill NZ0T
On Fri, Jan
deleted 4.47 and went back to 4.39. Problems solved - I went back to my
usual compression and mic gain settings and all is back to normal.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Audio-problem-with-Beta-4-47-tp7170723p7170723.html
Sent from
I can verify that despite his voice made for CW that N0NB sounds good on
1.947 most every night. I got the MH2 with my K3 and always got excellent
reports with it. I now use a Radio Shack dynamic studio mic I bought for
$15 NIB on Ebay and get good reports with it too. With the range the K3
30 years on the air. I also heard it on 10 meters but not as
pronounced. Methinks that may be the source of the mush reports?
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-blur-was-a-no-show-during-ARRL-10m-tp7087044p7095840.html
Sent from the Elecraft
My new DSP board arrives Thursday. Will I need to write down or save my AGC
and other receive settings or are they stored elsewhere in the rig?
Looking forward to hearing what the difference will be in audio!
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com
Has anyone had any luck getting S-Meter Lite to work with LP-Bridge 0r VSPE?
I like to keep my logging program active and would love to run S-Meter Lite
at the same time.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/S-meter-Lite-with-LP-Bridge-or-VSPE
Make that VSPE, not ESOE lol.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/S-Merter-Lite-2-21-now-supports-the-K3-tp6669056p6674313.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
/Software/SMeterLite.htm
Thanks to Greg W8WW!!
73 Bill nz0t
--
View this message in context:
http://elecraft.365791.n2.nabble.com/S-Merter-Lite-2-21-now-supports-the-K3-tp6669056p6669056.html
Sent from the Elecraft mailing list archive at Nabble.com
No luck with ESPE either. Hope Greg can get LP-Bridge or VSPE going for us.
S Meter Lite is a neat program!
--
View this message in context:
http://elecraft.365791.n2.nabble.com/S-Merter-Lite-2-21-now-supports-the-K3-tp6669056p6670367.html
Sent from the Elecraft mailing list archive at
Has anyone been able to get S-Meter Lite to work with Beta 4.39? The website
only lists Yaesu and Icom configurations so I assume something is missing
there? It looks like a neat feature and I would love to try it but can't
figure it out.
73 Bill NZ0T
--
View this message in context:
http
The version I found is from 2007 and just has Icom and Yaseu settings. I
would to try this so if anyone figures it out please post how you did it.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Firmware-rev-4-39-New-main-sub-AF-mixer-settings-high-res-S
I've been using the Dynex DX-UBD9 for a long time now. Works fine with my K3
and W2. I have used them with my Dell Inspiron 6000 laptop and Acer netbook
with no problems. I use 2 of them - first one I bought new at Best Buy for
about $35 and the 2nd was refurbished for $9 on EBay.
73 Bill nz0t
We used my K3 for the CW station at the WS4Y effort for the 3rd year in a
row. 989 QSO's using a 135' zepp at 60' and the K3 internal tuner.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-at-Field-Day-tp6521189p6523367.html
Sent from the Elecraft mailing list archive
in K3EZ and try them all out this weekend.
73 Bill NZ0T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FD-AGC-settings-for-CW-tp6506743p6506743.html
Sent from the Elecraft mailing list archive at Nabble.com
in the shack with acceptable coax losses. The SWR gets out of hand
below 60M and must be matched at the base.
73 Bill nz0t
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-S9-43-Vertical-tp6193993p6196827.html
Sent from the Elecraft mailing list archive at Nabble.com
B***h, b***h, b***h!
;)73 Bill NZ0T
It's OK everyone - I know this guy.
Nate Bargmann wrote:
Since this seems to be gripe day, allow me to toss one more on the pile.
:-)
I note that it would appear that the Linux and Mac versions of the K3
utility are becoming third class
Have fun with it Jim!
Merry Christmas
73 Bill NZ)T
--
View this message in context:
http://elecraft.365791.n2.nabble.com/New-K3-P3-is-here-tp5864403p5866269.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft
Test
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Test-tp5834531p5834531.html
Sent from the [K3] mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
test
--
View this message in context:
http://elecraft.365791.n2.nabble.com/test-tp5835280p5835280.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home:
with the smoked K3 would be appreciated before he sends it back to
Aptos.
73 Bill NZ0T My K3 is OK
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Bad-start-to-FD-smoked-a-K3-tp5225225p5225225.html
Sent from the Elecraft mailing list archive at Nabble.com
We are NOT using the amp for FD! We are dumb but not that dumb.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KPA100-let-smoke-out-tp466504p5225812.html
Sent from the Elecraft mailing list archive at Nabble.com.
but it did so now we will try to get it fixed and go on.
We are sorry to have cause so much trouble. I suggest this thread should end
unless someone can give us a credible fix.
The owner of the k3 John H Howard being allowed to post on nz0t log in as
I do not have one.
--
View this message
Exactly what we were looking for and thank you as we suspected the Kant3
board right at the beginning. Will address the issue.
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Bad-start-to-FD-smoked-a-K3-tp5225225p5226325.html
Sent from the [K3] mailing list archive at
It depends on band but sometimes I see 2.5 on the W2 (verified by my
analyzer and SWR meters in my Ten Tec tuner and a TS-940S) but 1.5 or so on
the K3. For the most part the K3 shows a lower SWR than any of the rest of
my meters. And, for the most part my W2 agrees cloely with my analyzer,
I have K3-100 kit 1502 with the internal tuner and FW 3.76. I know there
have been many posts about the meter SWR error but I really haven't seen a
resolution posted. Before I bought my W2 I used a cheap SWR/Power meter and
I thought the error was in it. Now that I have the W2 (which appears
Umm, do you guys ever just have fun operating?
Just wondering
--
View this message in context:
http://n2.nabble.com/The-Myth-of-Lying-to-Your-K3-tp4727680p4730015.html
Sent from the Elecraft mailing list archive at Nabble.com.
John,
What OS are you using? Firefox, IE, Windows 7, etc? You might also list
what anti-malware you are using.
73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com/k3-utility-tp4649574p4650190.html
Sent from the Elecraft mailing list archive at Nabble.com
I've been asked that a few times by friends. Are the boards built here in
the USA or overseas? I'm assuming the components themselves are from
overseas?
73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com/Are-K3-boards-built-overseas-tp4609367p4609367.html
Sent from
Talk is cheap...But the fact is, Kenwood, Icom, and Yaesu have had the
ability for a long long time to make receivers with good close-in blocking.
But they always seem to put the dollars into bells and whistles, and lots of
buttons and knobs.
Just like their cars. Glitz over performance
I got the MH2 with my K3 and it works fine but I then bought a NIB Radio
Shack dynamic studio mike (33-3038) off Ebay for $15 and I get great audio
reports. Hooked it up to the rear mic input and use VOX with the mic
mounted on a converted lamp boom. Works as well as a friend's that has $150
Not compared to the Rice Rockets! ;)
- Original Message -
From: Ted Roycraft [via Elecraft]
To: NZ0T
Sent: Monday, February 15, 2010 10:59 AM
Subject: Re: K3 Competition
Toyotas and glitzy in the same sentence ... interesting.
BMW not glitzy???
On 2/15/2010 11
So.
What about the K4?
Sorry I just couldn't resist.
--
View this message in context:
http://n2.nabble.com/Elecraft-Amps-tp4555458p4577159.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft
forward on
to him.
Thanks and 73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com/K3-remote-operation-tp4569071p4569071.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http
Is there any documentation on how to go about building the Softrock
panadapter for the K3? I haven't found anything via a search here or on the
internet. Any help? Seems like an inexpensive way to get panadapter
capability.
73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com
All I can say is that I love my K3 but maybe that's because I use it to
operate on the bands instead of performing all kinds of nit picking tests on
noise, AGC, NB and whatever else I can think of.
But maybe that's just me. 73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com
. I can build
a kit just fine but I'm lousy at breadboarding a circuit from a schematic.
Does anyone know of a place I could find something like that for a 20 amp
regulated linear supply?
73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com/Looking-to-build-a-better-power-supply-from
but not any bass boost. I
suggest you find a quiet frequency, a group of friends and work it out over
the air.
73 Bill NZ0T
Don Wilhelm-4 wrote:
Phil,
Adjust the mic gain until you have 5 to 7 bars indicated on the ALC
meter, then add compression as you desire.
You can use the monitor
Don't know about actual time but 90% the K3 and 10% my pristine TS-940S.
Mike-14 wrote:
I didn't find any questions about marketing when I took my ham exams. I
think all that needs to be judged on the subject, is to look at sales vs
the time the K3 has been in production. Seems to me
Thanks David! Nice to have the Always on top.
73 Bill nz0t
David Fleming-2 wrote:
An updated version of the W2 Interface software is available for download.
Version 1.1.1.1
Windows: http://sight.net/W2/W2_WIN.zip
Mac: http://sight.net/W2/W2_OSX.zip
- Added Always on top option
and is a
continuous bar with a switchable peak indication. This is only the 2nd
version of the diplay software and I'm sure it will continue to improve. I
have a friend that has the LP-100A and it's a really nice meter but I'm not
sure I want to pay $120 more for it.
73 Bill NZ0T
Phil amp; Debbie Salas
cells
or external 6 volt source. They automatically turn them selves off after a
few minutes without any input and come back on when it is resumed which
helps save batteries. I power them with an old 6 volt cell phone charger
wall wart I had in the junk box.
73 Bill NZ0T
Julian, G4ILO wrote:
I
Yep K3 1502 and K2/100 (forgot the serial number) that I sold.
73 Bill NZ0T
Roger K7SJ wrote:
Yup!
K2 #755
K3 #75
73 es Merry Christmas!
Roger
K7SJ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
Bill NZ0T
--
View this message in context:
http://n2.nabble.com/Help-W2-interface-window-is-gone-tp4192372p4192372.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman
\Application Data.
On Vista and Windows 7:
C:\Users\USERNAME\AppData\Roaming
73, David, W4SMT
--- On Sat, 12/19/09, NZ0T n...@cox.net wrote:
From: NZ0T n...@cox.net
Subject: [Elecraft] Help! W2 interface window is gone!
To: elecraft@mailman.qth.net
Date: Saturday, December 19
and folders'. Click 'OK'.
Now you should be able to find the file. Yes, USERNAME is the username you
login as. On my XP system, it's 'Administrator'.
David, W4SMT
--- On Sat, 12/19/09, NZ0T n...@cox.net wrote:
I'm stupid - can't find W2Prefs - I looked in My
Computer, C, documents and
settings
a computer
illiterate.
73 Bill NZ0T
Brian Broggie wrote:
Now available on the Elecraft website (in Software/W2) is the Elecraft
W2 Interface for both Windows and Mac.
David Fleming, W4SMT, has written a cool program that has:
* bargraph displays of Forward power, Reflected power, and SWR
Going even further back in Trekkie yore - you are now Of the Body.
According to Landru anyway.
Randy Hall wrote:
HI,
I just received my K3, SN2321 that I bought from Tom W0TOM.
I am looking forward to getting it setup and on the air.
Randy
K7AGE
Brian, I don't see the peak hold on the computer display - will we see that
in a later version?
Brian Broggie-2 wrote:
Hi, Bill!
If you send the W2 a P via the W2 Utility (or the buttons on the W2
Interface program) the Peak-Hold LED should come back. Sending the
command toggles the
Thanks Brian - the improvement in AUTO is very evident in my limited use so
far. Really looking forward to the software for computer display!
Brian Broggie wrote:
Hot news! The latest W2 firmware rev (0.92) is now available on our ftp
site. The easiest way to get it downloaded into your
This happened several more times. I had been in PEP mode while all this
happened but after I changed to average mode it has not happened again.
Hope the coming firmware updates solve this issue.
NZ0T wrote:
Interesting problem with my W2 this morning. Was on 75 for a net at about
500
it - all is fine now. Could be RF from the Windom - mine tends to send RF
back down the coax even with an RF choke in line. Anyone else had this
happen?
73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com/Weird-W2-problem-tp4156475p4156475.html
Sent from the Elecraft mailing list
Thanks for the update Wayne - do you srill anticipate the first version of
the PC software to be available this week?
73 Bill nz0t
wayne burdick wrote:
We'll be making a number of improvements to W2 firmware in future
releases (starting in January). Firmware updates are very easy to do
I'm looking forward to seeing how it works for me!
73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com/Any-progress-on-the-PC-VisualBasic-software-upgrade-tp4107664p4107664.html
Sent from the [MM] mailing list archive at Nabble.com
Sorry, I didn't specify for the W2! This is the software that will allow
display of the W2 output on a computer.
NZ0T wrote:
I'm looking forward to seeing how it works for me!
73 Bill NZ0T
--
View this message in context:
http://n2.nabble.com/Any-progress-on-the-PC-VisualBasic
When I click on the Nabble link it says it has been deleted. I finally got
here by entering through Nabble.com. Anyone else having that problem?
--
View this message in context:
http://n2.nabble.com/Nabble-can-t-get-there-from-the-Elecraft-page-tp4090805p4090805.html
Sent from the [K3]
Thank you!!
Eric Swartz - WA6HHQ, Elecraft wrote:
Fixed!
73, Eric
Julian, G4ILO wrote:
NZ0T wrote:
When I click on the Nabble link it says it has been deleted. I finally
got here by entering through Nabble.com. Anyone else having that
problem?
Yep. I think the url
at the same
time when it becomes available. Any ideas on what I'm doing wrong? Go slow
- I'm computer stupid!
73 Bill nz0t
--
View this message in context:
http://n2.nabble.com/W2-connection-problem-tp4060656p4060656.html
Sent from the [MM] mailing list archive at Nabble.com
Yes, forgot to mention that.
David Fleming-2 wrote:
Are you selecting the correct COM port from the W2 Utility 'Port' page?
David, W4SMT
--- On Tue, 11/24/09, NZ0T n...@cox.net wrote:
I have no problem connecting to my W2 using the utility
directly thru my
laptops port but when I try
1 - 100 of 241 matches
Mail list logo