Thanks.
I was curious if the screw kit Elecraft provides is just for cover screws.
They are working on a SS kit for the KPA 500 too.
The cost for 100 screws has shown there is no reason other than profit
not to include SS hardware with the kits from the start.
Mike W0MU
W0MU-1 CC Cluster
You need to turn the bias on. push the 2 button while setting the mic
for front panel.
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/9/2011 8:59 AM, Natan Huffman wrote:
Hello,
Just received a new K3 and I can't seem to get it to transmit any of the
voice modes. I have done the following:
I agree with most of the others, SS need to be the standard. These
rigs are expensive. Top of the line rigs and amps should not be rusting
away after a week.
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/8/2011 6:56 AM, Don Wilhelm wrote:
I believe the K3 SS screw kit has enough stainless
I do not believe that the SS kit was available when I first ordered
however I could be mistaken. If a company is building a reputation of
top quality products why would they want to skimp on screws that rust
after a few days in a high humidity/salt air environment. If I had any
inclination
Check the archives but I believe this is something you do not want to do.
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/8/2011 10:27 AM, Mike Harris wrote:
G'day,
Anyone using an USBRS232 interface between the PC an P3/K3 combo. I'm
particularly thinking something like the microHAM Digi
I have never heard a pop in mine nor in N1NK's in J6.
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/8/2011 5:21 PM, Dave Perry wrote:
Yes, my KPA500 has been doing the same. Whenever I mention it here on the
reflector, I get zero response. I cannot tell whether this is a problem or
You sir do not have the newest beta firmware release. Get with the
times! :)
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/7/2011 11:27 AM, n...@n5ge.com wrote:
Elecraft; Please modify the K3 so I can set it in DX mode and go watch my
favorite TV show while it works DX or contests for me.
Nearly all my case screws on my K3 and KPA 500 are showing signs of rust
after being in Saint Lucia for just 11 days. Mother nature is
relentless down there!
--
Mike W0MU
W0MU-1 CC Cluster w0mu.net
__
Elecraft mailing list
Home:
Prior to cluster and RBN we would just be listening to band noise and no
callers.. :)
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/5/2011 4:05 PM, Luis V. Romero wrote:
Ron:
Maybe I'm just a dinosaur waiting for the next asteroid, but
as a Novice I learned it was bad practice ever
It would be interesting to hear if a recording of this coming out of the
back of the K3 is the same as what is being heard at the headphone or
speaker jack. Obviously it should be.
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On 12/4/2011 6:25 PM, David Gilbert wrote:
Of course Elecraft owes us an
Vox can get you into trouble. There is one net where someone has set
his cell phone next to his radio and the noise it causes trips the vox.
We have also heard all sorts of conversations that probably should not
be on the air hi!
Footswitch for me
Mike W0MU
W0MU-1 CC Cluster w0mu.net
On
Both performed flawlessly and it was a pleasure to use a K3 with the
enormous pileups we faced. No overloading and the dsp and filtering
were superb at slicing the piles into more manageable pieces.
--
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC
The 40 pin cabling being plugged wrong raises some flags. You might
want to contact support or call when they open. You can usually remove
the pin blockers with a small screwdriver or pliers
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster
What mic?
Which mic input are you using front or rear. If rear are you in the mic
input or line in?
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/18/2011 7:57 PM, Joe K2UF wrote:
I am trying to get my K3 set up for SS SSB. I
Do you have another mic? Even a mic for a computer would be worth trying.
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/18/2011 9:35 PM, Joe K2UF wrote:
Thanks to all who tried to help me with this problem. Everything that you
Me too. Using it now. I like the feel and fit. I am not completely
happy with the mic response yet but I have not played that much with the
eq settings.
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/17/2011 10:07 AM, Joe K2UF
I was helping a friend configure a K3 and he wants to use both
modesI recalled this thread...
http://www.mail-archive.com/elecraft@mailman.qth.net/msg125095.html
Is there a technological reason that this is a bad idea? If not will
there be some changes down the road to allow this?
--
Mike
I think the tuning relay was designed for amps. You would put it in the
ptt line. I don't know of anyway to defeat the K3's internal keying.
The antenna specs say it can handle 100 watts while the motors are going
but I don't like to do it either. If there is a TX inhibit on the K3
then
November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/16/2011 10:20 AM, Jim Brown wrote:
On 11/16/2011 9:08 AM, W0MU Mike Fatchett wrote:
I don't know of anyway to defeat the K3's internal keying.
N8LP makes a small device that does something like that. Don't know the
detail of how
Good luck! We hope to work you on 6 bands from J6M!
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/16/2011 11:11 AM, Igor Sokolov wrote:
We are going to operate as 8Q7DV in CQWW CW. The Multy Op station will
consist of a pair
See answers below
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/14/2011 2:15 PM, Sebastian, W4AS wrote:
As a potential future buyer of the KPA500, I have a few questions, for those
who actually own it:
What have you found to
I am a contester but do all sorts of operating. I have two K3's,
initially I only had the 2nd receiver in the unit that I designated the
main radio. This radio also has lots of filters etc. I took the main
K3 to my Montana home for the summer and ended
I don't think you can over drive it as there is a overdrive fault and
output leds change color to let you know how much power you are putting
out. Mine is packed for J6 so I don't recall if it is green, yellow,
red. I set the radio output so the amp puts out 500w. An extra 100
watts
EZ outs?
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/13/2011 3:06 PM, DOUGLAS ZWIEBEL wrote:
I recently upgraded my first run K3 and SN 822. 822 was fine, but
with #295, I had the same thing as you describe..several times. I
I replaced the LPA board and my K3 now passes the Low and High Power TX
Gain Calibration tests.
We believe that there was a failure of one of the drivers which required
much more gain to get the desired 5 watts out of the board.
If your K3 has the transverter board and it passes the 1mw test
Is the noise blanker on?
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/12/2011 5:34 PM, cbscholl wrote:
I believe that I am hearing raspy or slightly distorted audio on receive on
my K3. It has current mods. I have noticed the
The only distortion I have seen is with the NB on which he said he
checked. Is this an early version of the radio? Maybe this is a case
of oxidation on the connectors. Only hearing it one band makes this a
very interesting problem.
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21
Dick,
When the KPA500 is hooked up and in operate mode you can set each bands
output. When the amp is in standby mode then you can set the output to
a different level. This can be done per band if you set the PWR Set to
per band instead of normal.
The K3 should tell you that it sees the
The 1.8 is where I would go. Inrad also sells a 1.5 which a number of
people swear by for really nasty SSB contests.
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/10/2011 4:29 AM, Bruce Meier wrote:
As I operate much more CW
I just got a pair of the CM500's and they work pretty good.
My mic setting is on 3 to keep from over driving the alc on the radio.
Is this normal for this mic. I have Low Z selected and Bias. My Heil
elements the mic gain is much higher.
--
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU
Is there a way to save two separate setups for the TX EQ so you can hit
a button and switch between DX mode and Ragchew mode?
--
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
I have emailed support but was curious if others have seen this issue.
I was seeing a few spikes on the KPA500 so I decided to do the TX
Calibration. I have all the bands in good order except for 6m where the
output will not go above 3.6 watts on the 5W calibration or above 48ish
on the
This was measured on the K3 doing the TX gain adjustment. It fails and
gives an error message.
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/8/2011 11:01 AM, n...@speakeasy.net wrote:
Mike...do you have confidence in your power
I escaped many times and never had any issues other than the time I hit
the escape key about 50 times in a row as the computer got very
confused! I had to do a complete restart.
What do you use to interface with the radio. Baud rates, ports etc.
Mike W0MU
J6M CQ WW DX CW Contest 2011
I am looking for suggestion on the best receiver setup for our trip to
J6. I know we are going to have some pretty big pileups. I recall
reading about the VP6DX guys probably using no AGC and riding the RF
gain if my memory is correct.
Are there any other tweaks that might come in handy?
--
It appears that many of the knobs are not to be touched when the radio
is transmitting. If I did it would interfere with the correct sending
of cw and other things. If a station calls me off frequency I like to
slide the rit up when sending but that was not liked. Same for filter
widths..
I worked you! Mine worked great too. A great warm up for the CQWW CW
coming up!
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/6/2011 4:50 PM, W0UCE wrote:
I used my K-3, P3 and KPA500 for the first time in a major contest -
This is a practice session. No worries
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/4/2011 9:11 PM, Bob Cunnings wrote:
Forgive me for asking, but I'm not a contester and am unclear on how
things work. Tuning around 40 mtrs I
You have vox turned on?
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/3/2011 8:46 PM, Doug Shields wrote:
Hello everyone,
I am sure there is a simple and thoroughly obvious answer to this but I
haven't found it. I have
So what was the answer so it is searchable in the archives?
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/3/2011 9:28 PM, Doug Shields wrote:
Many thanks to all that responded so quickly. It is now working. Special
thanks to
You are in the stereo out jack right?
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 11/3/2011 10:25 PM, Joe K2UF wrote:
I can get stereo on front panel phones jack but not on the rear panel phones
jack. I have sub rcvr in right
SPKRS
STEREO or MONO; 4 to 8 Ω
Plugging in external speaker(s) cuts off the internal
speaker. A stereo plug is recommended; tip is left
speaker, ring is right. If you only have a mono plug,
set CONFIG:SPKRS to 1 to disable right-channel
audio. (Also see important note below.)
PHONES
STEREO or
There is nothing wrong with crimped connectors if done properly. Is
this an antenna that was working fine and then stopped on one band with
absolutely no changed in the shack or coax etc? What band is out of
whack...I apologize for missing most of this thread.
Mike W0MU
J6M CQ WW DX CW
Check the ribbon cable. A few people have missed a set of pins.
Mike W0MU
J6M CQ WW DX CW Contest 2011
J6/W0MU November 21 - December 1 2011
W0MU-1 CC Cluster w0mu.net
On 10/29/2011 11:21 AM, Nicolas Drin wrote:
Hi
I just finished to build KPA500 #455. Unfortunately I found several
Tom is a really good antenna designer. He has some interesting antennas
on his new site. Running the business was never a strong point. F12
suffered from many of the same issues.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/27/2011 6:13 PM,
Marquesas Islands is a separate DXCC entity. The French callsigns have
been a mess since I have been a ham 1978.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/26/2011 4:34 PM, ab2tc wrote:
Hello again,
No doubt about French Polynesia as the
I use the LDG AT600 pro and it works fine. I avoid MFJ if I can. Some
stuff is fine other stuff is wellnot.
If you have not purchased one you might consider waiting for the KAT500
that Elecraft is working on.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster
If it is a horizontal loop it better be pretty high or else all your
signals are going to heat the clouds and worms. try an inverted L or
some type of shortened dipole of V if you need to be on 160.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On
I have had issues with my KRC2 much of it is the poor operations manual
and interfacing to the K3. Jack at Elecraft and Gary have been great to
work with. Many of my problems appear to have been from jumper issues.
The documentation needs some major work in the way of examples of how to
I think I would do them all at once, opposed to doing one, rebuilding
the radio, tearing it apart etc.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/14/2011 5:59 PM, Phil Westover wrote:
I just received the following mod kits from Elecraft:
Congrats. I have not caught them on 160 ssb or 80 ssb or rtty on those
bands. Hey you are not a real dxer until you xmit all over the DX! I
have done it. It is easy to do. Life goes on funny enough. You can
work lots of DX with 100w it takes more skill than keying up the big
amp. Have
to each band decoder that is
attached to the K3 and KPA500 combination.
73,
Don W3FPR
On 10/11/2011 11:08 PM, W0MU Mike Fatchett wrote:
I am attempting to hook up an Array Solutions DBS-2 Band decoder on the
K3. When I have it connected using a Y cable the KPA-500 no longer
follows the bands
FSK is super simple to get going. No adjustments of audio etc. Let the
K3 do all the work. MMAVARI allows you when using N1MM to have up to 24
decoders going at the same time. While they may say up 2-10 the
decoders are probably only seeing the bandwidth of the radio which could
be 6k with
Yes. Exactly. The computer interface is like a memory keyer for RTTY.
It is more flexible if you have a computer close by and who doesn't
these days. Most logging programs even have RTTY built in so you can
send directly from your logging program. I use CommCat and I know many
others
The radio will output band data band 0-3 would this correspond to a-d
or would it be d-a?
--
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
__
Elecraft mailing list
Home:
Thanks! That is what I suspected!
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/11/2011 2:29 PM, Win Kriegl DK9IP/KH7CD wrote:
Mike,
Band 0 = A, Band 1 = B, Band 2 = C, Band 3 = D
73 Win DK9IP
Am 11.10.2011 22:23, schrieb W0MU Mike
I am attempting to hook up an Array Solutions DBS-2 Band decoder on the
K3. When I have it connected using a Y cable the KPA-500 no longer
follows the bands it seems to get confused. I have the KIO rev B board
which I believe should have the pull up resistors but I am seeing 2.3 to
2.5 volts
Post this to the N1MM list. I use the Microham MK2R+ or the Microkeyer
to provide the interface for the audio/computer etc.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/9/2011 12:38 PM, Don Wilhelm wrote:
Karlfried,
I believe the best
The KAT500 is in the works. No ETA
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/9/2011 9:51 PM, Alan Grant wrote:
I was wondering if you have an Auto Tuner planned now that you have the
KPQ500?
I have found my OCF dipole has a higher than I
100 watts
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/8/2011 7:58 PM, ANTHONY JAPHA wrote:
I don't see a mention of the safe RTTY power output in the manual. Seems it
should be in the specs, if nowhere else. What is it, pse?
Tnx and 73,
Too short IMHO. I think it is 3ft or 1 Meter. 6ft or 2 meters would
be better or at least an option for 6ft.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/7/2011 11:47 AM, Guy Olinger K2AV wrote:
Trying to look up the length of the optional
Or Elecraft could make the cable longer or offer a longer one for those
that like to plug and play.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster w0mu.net
On 10/7/2011 1:36 PM, Jim Brown wrote:
These cables are pretty easy to build. All you need is the raw
Me too but I don't think we were nearly good enough for that. the
KAT500 in time for the CQ WW DX CW would be nice thoughI think I am
dreaming about that too. We would be happy to beta test a couple of them!
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1 CC Cluster
Remote mount it. There really is nothing to do with the amp other than
turn it on or off and put it in standby. Other than the weight I don't
see why you could not stack it or make a shelf over the K3 for the amp
to sit on.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
W0MU-1
I was doing some checks on my bandpass filters last night and noticed
the the swr on 12m is 1.5 or 1.6 :1 this is into a dummy load. All the
other bands read 1:1 as expected. Could this be just a meter anomaly or
is something possibly amiss in the radio?
--
Mike W0MU
J6/W0MU November 21 -
This is great news and something we will continue to see more of as
there is less and less ground to put up big stations. I might just have
to get my Montana station back up to snuff so I can be in Colorado but
get pileups for the rare MT mult. Heck maybe there is money to be made
by
Curious that signal reports comes up today. I worked 7Z1HL today and
received a 329 report. He got back a 339 report.
The county hunter folks tend to give more realistic reports on a regular
basis.
In contests they mean nothing.
Mike W0MU
J6/W0MU November 21 - December 1 2011 CQ WW DX CW
I don't believe this is correct. I could not find anything in the DXCC
rules that say RST is required. They sure did not care what my signal
report was on the application and I don't think LOTW even cares about
the signal report.
Most awards require an exchange of information and the
FYI The K3 barely fits in the 1510 case for those thinking about a hard
case. The K3 just fits width wise in the case with no foam. Also there
are protrusions into the bottom of the case where the wheels are
located. I thought I could get more things inside the case than I was
able to.
A
I have one too works great. No noise that I can attribute to it.
I have an Astron Switcher and it is susceptible to rf on 20m. I saw a post
where someone has loose screws in theirs so maybe I should open mine up and
poke around.
Why would Elecraft not offer a ps kit for the K3?
Mike W0MU
I use a 1k filter in the main radio. It would make no difference which
receiver is was installed into.
I use it quite a bit especially for turning the bands looking for dx or
mults. When conditions get tough I switch in the narrower filters as
needed. You probably want a 400 in addition to the
The new noise cancelling Heil's are supposed to be better at not picking up
transmitted rf. I have one of the old ones which pick up the transmitted rf
and really annoying.
I have always used the Heil headsets and elements. My voice seems to work
well with them. I always get excellent reports.
Alpha or Acom. I had a THP and it was nothing but trouble. Maybe I got the
lemon. They look nice but just did not seem to hold up very well.
I have an Alpha 99 and love it and have owned other Alphas in the past and
they were all solid.
I have the Acom 1000 and it is great to have an amp
I enjoyed building my two K3's. To me it adds to the radio and the
experience. It is not overly difficult to build. I have a bit more
invested in my radio's than just some $$$.
Like Ed and Dave, I can easily see the value of buying the built radio. The
cost of assembly was not a factor in my
-Original Message-
From: cq-contest-boun...@contesting.com
[mailto:cq-contest-boun...@contesting.com] On Behalf Of Larry Schimelpfenig
Sent: Saturday, April 11, 2009 12:04 PM
To: cq-cont...@contesting.com
Subject: [CQ-Contest] SOME THOUGHTS ON USING THE K3 ON SSB
What I'm about to relate
It would be nice to have some type of fader control from main to sub. It is
sometimes nice to hear both at the same time in both ears and level up one
or the other.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you may
I think you FLOW solder.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you may
never get over. Ben Franklin
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On
I think Allied or some of the others in your article will sell in smaller
quantities. Make sure you know what you are ordering. Maybe WX0B buys
enough to get a better discount.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the
I got mine in the mail today. It came from Germany?
Mike W0MU
A slip of the foot you may soon recover, but a slip of the tongue you
may never get over. Ben Franklin
__
Elecraft mailing list
Home:
You can ship the radio back and have Elecraft check it out. If it is a
board problem I believe they will take care of it for you.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you may
never get over. Ben Franklin
I had a pair of FT-2000's with matching speakers. I sold the 2000's and
kept the speakers. They work pretty well.
Mike
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you may
never get over. Ben Franklin
-Original
I guess I will have to check my speakers. This is a warning that should be
in bold in the manual.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you may
never get over. Ben Franklin
-Original Message-
From:
LMAO
No quite a vacuum tube anymore! What would compel someone to do that?
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you may
never get over. Ben Franklin
-Original Message-
From:
I believe they said that they were not releasing amps at Dayton. Maybe that
was on April 1st Then the thread turned to a fish fry. Walleye for me
please.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you may
never
We all have to do our part to reduce carbon emissions or so I am told.
Electric eels could be the answer.
The fish in question may be electric eels. Perhaps Elecraft is
investigating new and innovative power sources for portable operation.
Bruce-W8FU
They work great with constant type noise sources such as engines, fans, AC
etc. You can still hear people talking in the background, books drop.
I have a pair and love them!
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue
When you set up the 2nd receiver there was a choice to use the 2nd antenna
on the KAT or the Aux input and install the cable. There is also a menu
choice you can make. Set it to Ant2 not aux.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a
Actually that would not work either.
The PR6 is turned on by using the RX Ant button while on 6m.
The only way I see to make this work is by having the main vfo on the 6m
Freq and the sub on the lower band.
I have the pr6 but have yet to hook it up. I will be curious to see other
replies.
I am posting my questions to Wayne and his reply. I hope this will help
others down the road.
Mike W0MU
On Mar 17, 2009, at 8:43 PM, W0MU Mike Fatchett wrote:
Let me back up and make sure I am on the right page before jumping
into the deep end so to speak.
VFOA/Main is on 50.125 I have
I just wanted to point out that Wayne is responding to my questions well
into the night.
Thanks Wayne and the entire Elecraft gang!
These folks understand customer service and putting the customer first.
Now get some rest! HI!
__
You have to go into the registry and change a value. I am sure someone just
posted that link. If not Google it. I just went through this with XP home
and it can be done.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
A slip of the foot you may soon recover, but a slip of the tongue you
We just had a heated exchange about these antennas on another reflector.
Keep in mind that it is a compromise antenna. 43 feet is really not magical
to any band that I know of. You still need a good radial system etc.
From what I have read the tuner at the base would be much more efficient
déjà vu all over again.
I have worked Japan on my oil filled dummy load on 10m during the peak.
That does not equate to a great antenna. You can tune just about anything
does that mean it is a great or efficient radiator, no. If it is the best
you got great. If you were using an ISOLOOP
Have you calibrated it with a known source? Elecraft makes a nice signal
generator kit that works great for this. You do need to enter the gain on
the 5 pole filters. They are negative numbers so that might change things.
Do you happen to have the pre amp on. It is generally not needed on
I assume you have activated them for proper modes and entered the proper
offsets. You can do this with the K3 utility and your computer or via the
menu system.
CC Packet Cluster W0MU-1
W0MU.NET or 67.40.148.194
-Original Message-
From: elecraft-boun...@mailman.qth.net
Hmm I must be watching the wrong news stations.
I have heard of Tea Parties starting and Militia's on the rise threat of a
nuclear attack had not made the radar.
I will stop before this gets political though. I would expect that most
electronics will be toast if you are close to the detonation
Recommended frequency of 14.275??
Might want to change that as that frequency is a mess. Might save some poor
guy a tongue lashing by the owners of that frequency.
Good luck to all. I think I will get on in a bit and hand out some
contacts.
A slip of the foot you may soon recover, but
It is also unclear what the real purpose is for the rx ant out. From what I
have been told if I want to share my rx antennas with the two receivers then
I should use a T or splitter and go to each input separately.
I would think that RX Ant Out would allow you to take the RX antenna to
another
The radio defaulted to AFSK or so I thought. Not sure what the Wayne told
you as he did not post it to the list. :)
A slip of the foot you may soon recover, but a slip of the tongue you may
never get over. Ben Franklin
-Original Message-
From: elecraft-boun...@mailman.qth.net
... passed the Extra [END of Thread]
(Eric Swartz - WA6HHQ, Elecraft)
2. K3 KRX3 ANT (Evert Bakker (PA2KW))
3. Re: K3 KRX3 ANT (W0MU Mike Fatchett)
4. Re: K3 KRX3 ANT (W0MU Mike Fatchett)
5. K2 KDSP clock doesn't work (jo...@arnoldassoc.com)
6. Re: K3 KRX3 ANT (Don Wilhelm)
7. K3
201 - 300 of 382 matches
Mail list logo