I also run a KPS-500 on a basic household circuit. The literature about
the amp shows a draw of only 8 amps, so I can run my whole Elecraft station
without the higher voltage circuit — really handy and only 3-4 dB down from
a legal limit amp.
73 de Ted Edwards, W3TB and GØPWW
and thinking about
Elecraft made a run of SVGA boards for a waiting list so I got mine —- then
they would sell the extras. Check with them if any left.
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
he KAP-500 direct to antennas without the
tuner.
Thanks ahead of time for your good wisdom.
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
_
My trusty KPA-500 has started acting up.
Only 100 watts on 160m and 80m, and it takes more drive on the other bands.
What's the good idea on this?
Yes, the antennas check out fine for 160 and 80.
Good measurement numbers and working fine directly from the K3.
Thanks!
--
73 de Ted Edwards,
" But when I go into settings and look at the Microphone level, I can see the
audio is apparently being received as the level varies as I change the level of
the data on the K3S line out."
Jim, when you do this, does anything get recorded?
73, Ted W4NZ
-Original Message
l
> > Message delivered to k9...@socket.net
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Ele
net/
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to markmus...@outlook.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://
___
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email li
t mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered
Eric,
What's the status of a K4 to K4D conversion kit?
Thanks and 73,
Ted Roycraft, W2ZK
On 1/12/2023 22:25, Eric Swartz wrote:
We've been working hard to get the K4 & K4D backlog down and I'm now
pleased to announce that it has been reduced significantly. Whew!
We
For years, I had only two antennas to switch at the tuner, but I have now
strung a third one.
And what I am finding is that the tuner switch can only identify the two
and not the third one.
Any recommendations on where I should begin to sort this out?
Thanks, gang!
--
73 de Ted Edwards, W3TB and
htm
> > Post: mailto:Elecraft@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to h...@optilink.us
>
> _______
?
Thanks!
--
73 de Ted Edwards, W3TB and GØPWW
Tennessee Contest Group
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
__
Elecraft mailing list
Home: http://mai
.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
___
ws only about 170 mA in receive mode. And a great excuse
> to
> >>> get outdoors.
> >>>
> >>> Details on the KX2 can be found here:
> >>>
> >>>
> >>>
> >>
> https://elecraft.com/collection
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help
t/donate.html>
> > Message delivered to kb1...@arrl.net <mailto:kb1...@arrl.net>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
>
list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
>
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
&qu
Bob,
I guess you missed my post!!
Yeasu Does NOT have the overshoot issue!!
K2QMF
On 9/21/2021 2:14:12 PM, Bob McGraw wrote:
As to the attenuator, a 6 dB attenuator rated at 100 watts is no big
deal. The challenge is to switch the attenuator in and out between TX
and RX modes.
A better solutio
I have a Yeasu FTdx5000 and an FTdx101MP.
Both are driving Elecraft KPA1500's.
The driver power is reduced to about 35 Watts on both! I have no over shoot
with either rig!
Do not use ALC!! Lower the drive power.
No issues! Works Great...
K2QMF
On 9/21/2021 9:38:49 AM, jerry wrote:
On 2021-09
"... Iambic (of whatever alphabetical variety) is pretty atrocious..."
https://www.morsex.com/pubs/iambicmyth.pdf
Ted W4NZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Chuck Chandler
Sent: Wednesday, July 7,
there somewhere!!
> >
> > Hank
> > K4HYJ
> >
> > > On Apr 25, 2021, at 9:28 AM, eda...@aya.yale.edu wrote:
> > >
> > > I never took a drafting class nor anything like it in high school,
> yet its
> > > absence never hurt me professionally.
> >
> > From a Clearing in the Silicon Forest
> > Beaverton (Washington County) Oregon
> >
>
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http:
Care to explain? It worked well when there was a backlog of orders for the
K2, why not for the K4?
Ted, W2ZK
On Tue, Jan 5, 2021 at 6:00 PM Nr4c wrote:
> Not going to happen.
>
> Sent from my iPhone
> ...nr4c. bill
>
>
> > On Jan 5, 2021, at 11:50 AM, Ted Roycraft
&g
I assume that all K4's being shipped now are to those in Group 1. So, it
would be very informative and interesting if Elecraft could post the
order date of the K4s going out the door most recently as they did with
K2's twenty years ago.
73, Ted, W2ZK
On 1/5/2021 10:17, Mark Mu
me: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@
Well K9FD, thank you for letting us know "what" you are.
On 10/13/2020 20:20, K9FD wrote:
Boy it fits the person asking the question.
There are reams of files and court filings against Hir-onono for
harassment
when she ran or owned a company out here many moons back, she a dike
as all the com
http://mailman.qth.net/mmfaq.htm
>
> Post: mailto:Elecraft@mailman.qth.net
>
>
>
> This list hosted by: http://www.qsl.net
>
> Please help support this email list: http://www.qsl.net/donate.html
>
> Message delivered to w3tb@gmail.com
--
73 de Ted Edwards, W3
>
> Elecraft mailing list
>
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
>
> Help: http://mailman.qth.net/mmfaq.htm
>
> Post: mailto:Elecraft@mailman.qth.net
>
>
>
> This list hosted by:
, I think this policy would cut way down on the
unnecessary emails coming to this mailing list asking "when am I getting
my K4".
Best regards,
Ted Roycraft, W2ZK
On 9/1/2020 12:47, Wayne Burdick wrote:
Hi Björn,
The programmer's reference is mostly complete, but I still have to se
When they do start shipping it would be very interesting if they publicize
the date that the shipped orders were placed.
On Wed, Aug 26, 2020 at 7:19 PM Nr4c wrote:
> Not the END yet!
>
>
>
> But close.
>
>
>
> Sent from my iPhone
>
> ...nr4c. bill
>
>
>
>
>
> > On Aug 26, 2020, at 1:53 PM, Jose
; Post: mailto:Elecraft@mailman.qth.net
>
> >>>
>
> >>> This list hosted by: http://www.qsl.net
>
> >>> Please help support this email list: http://www.qsl.net/donate.html
>
> >>> Message
ing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to
reducing to 50 watts output and taking
the -3dB will work out in terms of power draw?
In the past, I have done QRP and would like to be a bit louder this time.
Thanks to all who might respond.
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won'
pleased when we hear his update?
Thanks and 73,
Ted, W2ZK
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http
When I disconnect the red and black cable from the PS and turn on the PS and
amp the HV/Supply Light stays
GREEN!! I tried to reseat both ends of the power cable but problem still
exists!! as soon as I turn on the amp with both ends connected the PS HV/Supply
light turns RED!!!
HELP!!
Ted
Hello,
I was in the IOTA Contest and a got a Fault message"FAULT: 50V Supply
0.0Volts"!!!
I can't reset this Fault!!
And the HV/Supply Light on the PS is RED!
I tried turning the PS off and back on but no change!!
Any help or suggestions much appreciate...
Lou, Inrad still lists them on their website but I thought I heard they
were not making them anymore. It wouldn’t hurt to check with them.
https://www.inrad.net/home.php?cat=140
73, Ted, W2ZK
On Sat, Jul 18, 2020 at 1:51 PM Lou W0FK wrote:
> Anyone?
>
>
>
> --
> Sent fro
Walter Maxwell’s interesting book, “Reflections”, has an in-depth
discussion on non-resonant antennas and tuners. Highly recommended.
73, Ted, W2ZK
On Sat, Jul 18, 2020 at 10:05 AM Lyn Norstad wrote:
> Exactly.
>
> -Original Message-
> From: W2xj [mailto:w...@w2xj.net]
>
If that's the way you feel, why don't you ask for your money back?
Ted, W2ZK
On 7/16/2020 13:55, Tox wrote:
Given lead times, if the Dec/Jan ship date was not BS, then parts would
already have already been in transit before primary covid impacts were in
place. OK, that was
I imagine that there is no one who wants the K4 out the door more than
Elecraft does. It makes no sense to think that they are intentionally
dragging their feet.
73, Ted, W2ZK (eagerly awaiting the delivery of my K4 too)
On 7/16/2020 13:33, Dave Cole wrote:
Lets see, solved pre COVID, then
an/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
>
--
73 de Ted Edwards, W3
Maybe it’s apples and oranges but does anyone know how long field testing
went on for the K3 before the first shipments were made to purchasers?
73, Ted, W2ZK
On Tue, Jul 7, 2020 at 12:58 PM Ed Muns wrote:
> Field Test is charging ahead with internal and external Elecraft users.
> 100%
Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today
I have found an XG2 in working condition.
Thank you all for your offers and interest.
73, Ted NA7C
On Thu, Jun 25, 2020 at 10:04 PM Ted Cowan wrote:
> I am looking to buy an Elecraft XG1 or XG2, either built and working or in
> kit form.
>
>
mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
>
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do
with my
purchase or if I need to reach out to you again. Those of you wanting to
sell yours to others are of course free to do so.
73, Ted NA7C
On Thu, Jun 25, 2020 at 10:04 PM Ted Cowan wrote:
> I am looking to buy an Elecraft XG1 or XG2, either built and working or in
> kit form.
>
I am looking to buy an Elecraft XG1 or XG2, either built and working or in
kit form.
73, Ted NA7C
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Hello All,
How do you remove the PowerPoll P/S connector from the back of the KPA1500??
Any help much appreciated!
I don't want to force them out!
Thanks,
Sal K2QMF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/e
).
Hope this helps.
73, Ted, W2ZK
On 6/5/2020 22:20, Jim McCook wrote:
Tonight my K-3 failed after being on for about an hour when I was
away.It displays ERR EE2.When powered on again the same
Hello All,
Does anyone have a clear picture of the KPA1500 "PA Input Board"?? Or a
schematic??
Many Thanks in advance for any info...
73,
Sal K2QMF
Sponsored by
https://www.newser.com/?utm_source=part&utm_medium=uol&utm_campaign=rss
his list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
>
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow
gt;
> > See https://www.dj0ip.de/balun-stuff/ for further references.
> >
> > 73
> >
> > Bob, K4TAX
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http:/
/Win4K3Suite-Documentation-v1.45.pdf
com0com - http://com0com.sourceforge.net/
It might take a couple of tries to make it work but it does a good job For
me.
73, Ted, W2ZK
On Wed, May 27, 2020 at 3:35 PM Tom Norris NB5Q
wrote:
> I have K3S Serial Number 11459 and a P3 and would like
Or maybe pick up a used K3.
On Tue, May 12, 2020 at 8:44 AM W0FK wrote:
> The KX3 allows you to add roofing filters (KXFL3 option), wherease kx2 does
> not.
>
> “ The KXFL3 is actually 4 different filters that are shared between Phone
> and CW modes. Containing 2 filters for each mode, the filt
net/donate.html
> >>> Message delivered to rick.n...@gmail.com
> >> __
> >> Elecraft mailing list
> >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq
mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message delivered to jackbrin...@me.com
> >
> ___
ed to raysil...@verizon.net
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted
,
and I took the train into Hoboken and the “Hudson Tubes” to Christopher St.
in lower Manhattan where the test was given. It was a great adventure.
On Fri, May 1, 2020 at 8:38 AM Tom & Barb Valosin
wrote:
> For Ted and others, do you remember Dave callsign? Kind of interesting
> ba
I took the test for Extra administered by an FCC examiner, David Popkin,
in NYC in 1964. So there were still FCC examiners then. Funny that I
still remember David Popkin's name but I can't remember what I had for
dinner last night.
73, Ted, W2ZK
On 4/29/2020 12:27 AM, Jim Brown wr
Practice!!
On 4/20/2020 2:21:53 PM, ae...@carolinaheli.com wrote:
What's the best method to send high speed CW with a K3S via Computer?
Serial adapter to the Key port or software via USB or ??
73
Jerry D. Moore
..
__
Elecraft mailing l
73
> > Lyn, WØLEN
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by
Please disregard
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
From the Power Supply or KPA1500?? Or Both??
On 4/5/2020 5:03:51 PM, Carl Yaffey wrote:
Hum is in the shack.
On Apr 5, 2020, at 4:58 PM, Salvatore Ted K2QMF mailto:k2...@juno.com]> wrote:
Hum on your Transmit Signal??
Or hum in the shack??
Where is the hum coming from??
On 4/5/2020 4:51
I missing?
Thanking you ahead of time for good help with this.
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
__
El
Hello All,
Does anyone know if there are any issues with the KPA 1500 when used in a multi
transmitter contest environment??
Thanks in advance for any info of input on this!!
73,
Ted K2QMF
Meghan Markle Confirms Unfortunate News
Where did this May rumor come from? Yes, the kit version is supposed to
come out months later but the Elecraft web site still says that the first
shipments of the K4 are targeted for January 2020.
Ted, W2ZK
On Wed, Jan 15, 2020 at 8:43 PM Keith N6JPA wrote:
> Don't worry. I have it
when the K-Pod knob was spun at the same time the P3
was used, along with heavy external polling from HRD, etc.
--
Yes, this is from 2016 but it does indicate a problem between the K3 and
K POD.
73, Ted, W2ZK
On 1/13/2020 4
Take a look at
http://www.arrl.org/Radio-Frequency-Interference-rfi
There are several links there that may help you. I’ve had some success
using ferrite toroids.
73, Ted, W2ZK
__
Elecraft mailing list
Home: http://mailman.qth.net
tmare.
73, Ted, W2ZK
On 12/31/2019 2:22 PM, Bob McGraw K4TAX wrote:
Thoughts on this. I would expect the K4 to be a high performance
product in both the on air performance and the communications
interface performance. I would not expect it to have any embedded
applications as there are just to
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
--
73 de Ted Edwards, W3TB and GØPWW
an
More...
Although it has not happened, I have long expected June VHF and Sept VHF to
displace Field Day and then get more of those many new Techs active.
On Mon, Dec 16, 2019 at 3:42 PM Ted Edwards W3TB wrote:
> Yet, here is another product idea that is driven by my concern that so
> ma
fo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
>
--
73 de Ted Edwards, W3TB and GØ
, 2019 at 9:56 AM Scott Manthe wrote:
> Both receivers have to use the new synthesizer board. You can't install
> them in the way you've described, unfortunately.
>
> 73,
> Scott N9AA
>
> On 12/16/19 10:48 AM, Ted Edwards W3TB wrote:
> > I put it off for yea
-receiver. That may make it easier to change out later.
I am really so impressed with the K3 receiver after about 6 years that the
new synthesizer always seemed pointless -- but now I have one anyway.
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what o
drive is 20 watts. On 20
the drive is 45 Watts!! If I change bands I could overdrive the amp to a fault!!
I did not have this problem with my Acom 2000!
Any help would be much appreciated!
Maybe some way to retune the amps input circuit??
Many Thanks in advance...
73,
Ted K2QMF
; __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: ht
FTdx 5000..
Many Thanks for any info.
73,
Ted K2QMF
Forget Viagra: This Pill "Destroys" ED Without Prescription!
Med Journal
http://thirdpartyoffers.juno.com/TGL3141/5de937552cdc537545
Hi Ken,
By Multi TX I mean M/2 or M/M contest station!
Many Thanks for your input..
73,
Ted K2QMF
On 11/30/2019 6:51:20 PM, Ken K6MR wrote:
Not sure what you mean by “multi TX contest environment”, but I use mine in a
SO2R setup. Two K3s into the single KPA1500. Works just fine. It’s in the
Hello to all.
I just ordered a new KPA1500 and can't wait to receive it.
Was just wondering if anyone on here has used the 1500
in a multi TX contest environment??
If so, how did it perform??
Many Thanks for any info one this beautiful amp..
73,
Ted
et/mailman/listinfo/elecraft
> >> Help: http://mailman.qth.net/mmfaq.htm
> >> Post: mailto:Elecraft@mailman.qth.net
> >>
> >> This list hosted by: http://www.qsl.net
> >> Please help support this email list: http://www.qsl.net/donate.html
> >> Message deliver
by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
> Low space means fine teletype.
>
> On 9/30/2019 6:09 AM, Ted Edwards W3TB wrote:
> > I am not sure whether this is a K3 question or N1MM+ question...
> >
> > Working the CQWW RTTY this weekend, I found that my settings were
> different
> > on 15m than on 20/40m -
.
What do I need to correct?
Thanks to all!
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
__
Elecraft mai
gt; Please help support this email list: http://www.qsl.net/donate.html
> > Message delivered to n...@widomaker.com
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailm
Or use a left handed K-Pod.
73, Ted G7BQM
> On 31 May 2019, at 15:37, Wayne Burdick wrote:
>
> Even in the case of the K3, the VFO and RIT controls are on the right side of
> center. In the K4, with its large display, there’s really no choice but to
> group the controls on
>
> >
> > .
> >
> >
> > __,_._,___
>
> __
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@ma
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email li
to change the power
transistors.
73, Ted G7BQM
> On 7 Mar 2019, at 02:47, hawley, charles j jr wrote:
>
> Ok. What are they at the factory?
>
> Chuck Jack
> KE9UW
>
> Sent from my iPhone, cjack
>
>> On Mar 6, 2019, at 7:02 PM, Jim Brown wrote:
&g
once again - I will post the final outcome on the reflector, once
all is working again.
73, Ted G7BQM
> On 23 Feb 2019, at 12:14, Ted G7BQM wrote:
>
> Hello All,
>
> I have recently acquired an early K3 which needs tidying and checking over.
> So far all appears to be
?
If you have any details of the bias setting method, that would be really
helpful. I have not been able to find any information on this on the internet.
Thanks for the good luck - I need it.
73, Ted G7BQM
> On 23 Feb 2019, at 12:29, Peter Torry wrote:
>
> Hi Ted,
>
> I have
for an electronic copy.
73, Ted G7BQM (with quite a lot of Elecraft stuff!)
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
w3tb@gmail.com
>
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you can do tomorrow what others can't."
__
Elecraft mailing list
Home: http://mailman.qth.net/m
" The previous times ..." - ?
Good grief, how many times has this FET failed?
Ted W4NZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Wes Stewart
Sent: Thursday, December 13, 2018 3:09 PM
To: elecraft@mailm
one of our
meetings and we had a great conversation about his days in 7Q7.
I sometimes forget how small this hobby often makes our world.
73, Ted W4NZ
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
large knob. However, now the PC board on the back of the encoder
extends too far away from the the back of the Front Panel Board to allow
attachment of the Control Board to the two posts.
So, how to solve this problem?
Thanks, Ted Salmon WD4CAV
--
Sent from: http://elecraft.365791.n2.
So can the Orion/Orion II
Ted W4NZ
-Original Message-
From: elecraft-boun...@mailman.qth.net
[mailto:elecraft-boun...@mailman.qth.net] On Behalf Of K9ZTV
Sent: Wednesday, August 15, 2018 8:29 AM
To: John Harden, D.M.D.
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3
Incorrect
rt; set the K3's CONFIG:PTT-KEY
to OFF-DTR (or RTS-DTR if you are also using PTT via RTS)
Warning: leaving DTR set to Always on with the K3's CONFIG:PTT-KEY set to
OFF-DTR or RTS-DTR will cause a permanent "key-down" condition
73, Ted W4NZ
-Original Message-
From: ele
man.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
--
73 de Ted Edwards, W3TB and GØPWW
and thinking about operating CW:
"Do today what others won't,
so you
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to w3tb@gmail.com
>
--
73 de Ted Edwards, W3TB and GØP
1 - 100 of 249 matches
Mail list logo
