Exactly my findings at MW2I. Normally we dont use dpb as incoming signals
arrive all over the place frequency wise (in arrl rtty 2010 3 people called
over 1.5khz off!) outside the dpb passband. However it does help with really
weak signals when you have QRM
Dave
ww2r
appear >
> Message: 17
FT-847 is one example; it has 4 band specific PTT outputs on the back panel,
which are very useful in avoiding keying the 432 amp when on 6m
Dave
ww2r, g4fre
Message: 1
Date: Sat, 20 Feb 2010 17:36:50 +
From: "Dave, G4AON"
Subject: Re: [Elecraft] K3 PTT irritations
To: elecraft@mailman.qth.
I experienced the same issue when i got my 1st K3. My solution is at
http://g4fre.com/k3vhf.pdf
I keep requesting a "xverter only ptt" of Wayne when the issue of "feature
wishes" comes up, but it has not happened yet
Dave
ww2r
--
Message: 10
Date: Fri, 19 Feb 2010 1
We just sold my wifes TS850SAT with dvr, vs2 and 2 filters for $720. She was
prepared to sell her old anniversary present towards getting a K3 like mine!
She hopes Rose, n7hkw makes pink carrying bags!
Dave
ww2r
Date: Tue, 19 Jan 2010 14:11:23 +
From: David Quental
I do> not know ex
Be cautious on using VGA cables. I bought 2 a few years ago which didnt have
pin 9 connected which unfortunately is one of the band signals from the K3,
So I made my own with 2 connectors and a lenght of multicore cable
I just hit a similar snag this weekend, my cables unlimited PCM-2250 15 pin
Y
On my 3 flights from heathrow to Dallas Jan thro Nov this year they have
been VERY strict on the "one item of carry on, which includes purses,
computer bags etc" rule. This has resulted on one occasion of my 2nd checked
bag containing only an empty laptop bag, which had customs at DFW examining
the
Dave
I am currently using my k3 succesfully on 500khz. Since arriving here last
saturday I have heard 3 signals while listening on a casual basis out to
650km
I using the amrad active antenna in the roof space, but am building a tuned
loop for 136/500khz
Dave
G4FRE (WW2R)
Message: 40
Date: Fr
Bill
The K3 reports correctly up to 24999.999MHz. I am currently using mine on
24048.2MHz. Whereas Writelog uses this information appropriately I also have
never managed to get hrd4.1 to display it sensibly
Dave
G4fre
--
Message: 33
Date: Tue, 15 Dec 2009 21:11:14 -0
I use the same board/circuit I use to drive VHF transverters from my K3 to
drive my Dunestar. The only difference is the K3 menu settings. I wrote it
up at http://g4fre.com/k3vhf.pdf
Dave
ww2r
Message: 14
Date: Fri, 16 Oct 2009 08:17:07 -0500
From: Ken Adams K5KA
Subject: [Elecraft] K3 Aux I/O
Having had it tested it on a couple of UK repeaters, I found they require a
tone at the start of every transmission irrrespective of the gap between
transmissions; The present functionality is fine
Admittedly most have been accepting PL for many years now
Dave
G4FRE
Message: 6
Date: Tue, 06 Oct
with the imminent release of the w2, has anyone managed to determine the
dimensions of the remote sensors? Its not mentioned in the pre-Dayton .pdf,
but one assumes the size must be finalised by now
Dave
ww2r
> We're getting everything in for W2 manufacturing right now. If it all
> makes it her
which brings me to repeat of last years question. Will matching empty k3
style boxes/empty p3 cases be available for housing matching custom
accesories be made available?
Dave
ww2r
Message: 29
Date: Tue, 18 Aug 2009 06:51:37 +1000
From: Andy
Subject: [Elecraft] External speaker using P3 enclosu
sdriq has a usb connection which means i can use it with my laptop as a
panadaptor for the K3. It also works as a multimode receiver through 30Mhz
the lp-pan needs a soundcard so i had to have something much bigger/less
transportable than a laptop and it only works on one frequency; the IF of
the
Having made requests of Elecraft at the end of last year for a "eot only
when transverting" from the k3 with no success, I developed the "eot only
when xverting" circuit as part of my auto switching transverter interface
written up at http://g4fre.com/k3vhf.pdf. It will also appear in the
proceedin
turned off/uplugged the k3 last night, all was working well
Turned on the K3 this morning, had both error messages "ERR AT3" and "ERR
PL1"
"ERR PLI" was the most immediate, in this state there was no main vfo
tuning, so I consulted the manual
did a "config: vco md" recalibration of vco1. It fail
The original military specification document, to which the bird43 was built
only requires 10% accuracy (to accomodate "field usage"?)
I did some checking
with a power attenuator and an hp436 power meter my k3 power meter agrees
within 1% on the hf bands
with the same 100H element in 2 different
For those who I promised the information, I have just uploaded how I use my
K3 to automatically switch VHF/UHF transverters. This includes how I got
over the lack of a "ptt only when transverting" from the k3.
It is at http://g4fre.com/k3vhf.pdf
Dave
ww2r
___
also no 10MHz external lock facility (mentioned at Hamcom 2008 as a "new
year product") Perhaps its being saved for Hamcom 2009?
Dave
ww2r
Date: Wed, 13 May 2009 22:53:59 +
From: rfenab...@gmail.com
Subject: [Elecraft] K3 Sneak Preview
To: "Elecraft"
Message-ID:
<1779675086-124225
THe item has been sold. Thanks for all the interest
Dave
G4FRE
Message: 18
Date: Thu, 23 Apr 2009 20:19:30 -0500
From: "ww2r2"
Subject: [Elecraft] FS: LP-PAN
To: "Elecraft"
Message-ID:
Content-Type: text/plain; charset="iso-8859-1"
I have an LP pan for
I have an LP pan for sale which is no longer needed for my K3. It was built
from a kit
150GBP shipped, in UK only
If interested, contact me off the list
Dave
G4FRE
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo
Last weekend I had good success with using the rs232 port on the sdriq (with
spectravue beta 10) to control the k3. It got over the issue that my netbook
only has usb ports
Dave
ww2r
> Message: 18
> Date: Sun, 22 Mar 2009 19:22:03 -0400
> From: "Joe Subich, W4TV"
> Subject: Re: [Elecraft] K
The missing L3 has arrived and after installing it I now have transmit
output when the subrx is activated
Dave
ww2r
-Original Message-
From: ww...@g4fre.com [mailto:ww...@g4fre.com]
Sent: Tuesday, February 17, 2009 12:15 PM
To: elecraft@mailman.qth.net
Subject: RE: [Elecraft] K3: activat
Thanks to information from Charles Allen (who suffered the same issue) and
help from Dale at elecraft, the problem has now been identified as a subin
board production defect
The inductor (L3) that supples bias to switch the tx/rx pin diode to the tx
path on the board was not, and had never been
I wonder if anyone else has experienced the following? (and what the cure
was?)
In a k3 with atu xverter interface and subrx.
Ant 1 is selected
vfo a is set to cw mode and receives OK. Keying it shows rf output on the k3
power meter and the external power meter
vfo b is set to cw mode on
If by offest you mean the transverter offset (config: XVxOF) it applies to
both VFOs.
This brings up another interesting K3 Xverter observation from the VHF
contest a few weeks ago
config: XVx RF allows only 3 digits of MHz, quite reasonably, because thats
all the display can show. However it is
Yes, I do
As well as running the usual apps (writelog, mmtty mmstv and vac) I also
have it running the sdriq as a pan adaptor
dave
ww2r
--
Message: 28
Date: Thu, 5 Feb 2009 15:16:06 EST
From: dbellw...@aol.com
Subject: [Elecraft] DXpedition computer for K3
To: elecr
Do not be mislead by the manual as I was last weekend during the VHF
contest.
The "LP" has nothing to do with low ***RF*** power. It is active when
producing 100W or 0dBm in transverter mode. Currently there is no K3 keying
output that is ONLY active when transverting. To achieve this I had to
I got chance to try the fix recommended by Aptos today
As there is virually no lead length between the end of the windings and the
connections to the pcb, it was a challenge to move the end turns, but by
spreading the turns between the end turns the err vco 00374 no longer
happens
Dave
ww2
28 matches
Mail list logo