Does anyone have a K3 mini that they would be willing to sell for a
reasonable price? (or trade for a KAT500?) Please reply directly to my
QRZ.com address. Thanks. 73, Greg-N4CC
__
Elecraft mailing list
Home: http://mailman.qth.net/mai
It appears I have lost the bias supply going to the side Mic jack on my K3
Mini. There is no bias voltage on the tip of a test cable. However there
is 4.7-4.8 volts appearing on pin 6 of the 8 pin front panel mic connector.
I note that turning on the Mini from a cold start I see 3.8vdc on the t
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: ht
I am running my K3 Mini to my K3S via wireless. I am running into a strange
issue. Every time I go into CW mode I am getting a ringing noise. I can get
rid of the noise by changing the RF Gain. The thing I am wondering about is I
am not hearing any CW signals on 20m, 40m or 80m. I am just wo
I am remoteing with the Remote Rig twins, K3 Mini to my K3 at home.
Has been working good till all of a sudden. What happens is when I turn
on the Mini, it goes into the Term mode as normal and I can hear stuff
from the K3 at home BUT the Mini won't control the K3. The display is
stuck on it's
Can I use the MH2 mike for phone operation or do I need to use a Heil or other
headset?
Thanks,
Jim
W2SM/ZF2LC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
I'm barking up the wrong tree, please correct me.
> >
> > 73, and a firm left handshake,
> > John (XLX)
> >
> > -Original Message-
> > From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of
> Jim Cary
> > Sent: 29 October 2016 22:27
lf Of Jim Cary
Sent: 29 October 2016 22:27
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Mini Error question
I just packed up both my control and remote systems and moved them down to my
ZF QTH, where they will be permanent.
I have the K3 mini hooked up to the control RRC unit, but haven’t hooked up
es on that front, do shout and I'll see what I can do to help.
>
> John (XLX)
>
> -Original Message-
> From: Jim Cary [mailto:jimlc...@gmail.com]
> Sent: 29 October 2016 22:45
> To: John ; Barry Baines
> Cc: elecraft@mailman.qth.net
> Subject: Re: [Ele
on that front, do shout and I'll see what I can do to help.
John (XLX)
-Original Message-
From: Jim Cary [mailto:jimlc...@gmail.com]
Sent: 29 October 2016 22:45
To: John ; Barry Baines
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Mini Error question
John/Barry
ng tree, please correct me.
>
> 73, and a firm left handshake,
> John (XLX)
>
> -Original Message-
> From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Cary
> Sent: 29 October 2016 22:27
> To: elecraft@mailman.qth.net
> Subject: [Elecraft] K3
Jim,
it's just an error report that there's no connection to the remote side.
All fine as your remote is not connected yet. ;-)
SIP is the Session Initiation Protocol, basically the standard to
initiate a digital phone contact (the RRC's are using exactly that, an
VoIP connection).
73, Oll
ginal Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Jim Cary
Sent: 29 October 2016 22:27
To: elecraft@mailman.qth.net
Subject: [Elecraft] K3 Mini Error question
I just packed up both my control and remote systems and moved them down to my
ZF QTH, where they
Jim:
If the K3-Mini is powered up through RRC but the ’target’ K3/K3S is not powered
up and online, you’ll get a warning signal. This means that the mini is not
’seeing’ the host transceiver.
Power up the K3/K3S and see if that doesn’t resolve the issue. If you’re still
having issues, then che
I just packed up both my control and remote systems and moved them down to my
ZF QTH, where they will be permanent.
I have the K3 mini hooked up to the control RRC unit, but haven’t hooked up the
remote unit yet/
When I powered up the mini, and turned the volume control I got a three tone
warn
I just bought a used K3/mini to use with my remote base K3. I've been
using my home K3 to control the remote base. I needed the separate
control, as K8AJ, who I share the hack with, would like to have her
"own" rig.
Anyway, for anyone who has a K3/mini, when you power it up, and it is
not plugg
The K3 Mini only works witha K3. It does everything the K3 does when connected.
So your buddy should read the K3 manual.
He should also check out remotehamradio.com
Bill N2WL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailma
Got my new K3 Mini 0 today. Since I didn't order the cable, I made one
to take the
DB15 to the TTL only. I'm using existing cables that I had already made
to connect the Remote
Rig box to a keyer, microphone, and PTT footswitch, and the Mini works
fine with my
Remote station.
When it arrived
But my first thought when I saw it was, "Wow! A KX3 RF board with
the full K3 Front Panel would ROCK!" :). -kb7psg
On Sun, 23 Feb 2014, Bruce Beford wrote:
And now might be a good time to remind folks that the K3/0 mini is not a
radio by itself... It is a control panel, for a "real"
Read carefully. Reference to K3/0 Mini. Its a front panel only for remote
operation of a K3/10 or K3/100
...bill nr4c
Sent from my Verizon Wireless 4G LTE DROID
Alan Price wrote:
>How does it differ from the KX3?
> 73
>Alan
>W1HYV
>
>___
I'm pretty late to the K3 game due to a decade or
so focusing on other things than ham radio. I
thought I knew that the K3/0 had to do with remote
control and took the first message with subject
"K3/0 Mini" to refer to a mini K3/0. The earlier
ones on the "K3 Mini" were a bit confusing.
Than
And now might be a good time to remind folks that the K3/0 mini is not a
radio by itself... It is a control panel, for a "real" K3, just like the now
available full-sized K3/0. It is to be used to control a remote K3.
pictures on twitter:
https://twitter.com/elecraft/status/327112919525490690/phot
Alan,
The K3 mini prototype was at Dayton last year too. It has the same
front panel as the K3, but is not nearly as deep as the K3/0.
73,
Don W3FPR
On 2/23/2014 10:35 AM, Alan Price wrote:
How does it differ from the KX3?
73
Alan
W1HYV
___
How does it differ from the KX3?
73
Alan
W1HYV
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman
t;Don Wilhelm" [EMAIL PROTECTED]>
>To: "a.yoshida" [EMAIL PROTECTED]>
>Cc: Elecraft@mailman.qth.net>
>Sent: Monday, October 13, 2008 9:17 PM
>Subject: Re: [Elecraft] K3 Mini plug/jack mis-contact
>
>
>> Aki,
>>
>> There should be no differ
Don
Thanks for your suggestion. I will check all plugs now.
73
aki ja1nlx
- Original Message -
From: "Don Wilhelm" <[EMAIL PROTECTED]>
To: "a.yoshida" <[EMAIL PROTECTED]>
Cc:
Sent: Monday, October 13, 2008 9:17 PM
Subject: Re: [Elecraft] K3 Mini plug
Aki,
There should be no difference in the various mini-plugs as long as they
are the 3.5mm type. If you are using a 2.5mm, it might work for a
while, but will be loose in the jack and will not make good contact.
If you do have a 3.5mm plug and it is loosing contact, check to be
certain the
I sometimes find that mini plug/jack on the back panel makes
mis-contact. (Line in/out, Speaker etc)
Is there recomended mini plug ?
73
aki ja1nlx
___
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list
28 matches
Mail list logo
