When I get a bunch of decodes, I look at the time column. If the
values are mostly less than 0.5 things are OK. If they are over
1, then you probably won't make many QSOs.
73 Bill AE6JV
On 2/24/21 at 12:35 PM, ea...@comcast.net (Eugene Oliva) wrote:
I reset the time on my computer and made a
Navagate to:
https://pskreporter.info/pskmap.html
Put your call sign in on the top, and see if anyone is listening and
hearing you...
Go to a band that you are hearing a lot of stations on, and if within
your class of your license, transmit there by calling a CQ. After a few
minutes, hit
Sync your TIME on the PC. Of course this assumes that your PC is
connected to the internet.
Rich
On 2/24/2021 11:22 AM, Eugene Oliva wrote:
I have not operated FT8 in a long time. Using WSJT-X. I have all
parameters set up and COM responds OK. Also can get 4+ bars on ALC
meter but it
A couple of things to consider:
I assume you are receiving data OK?
Are you in Data A mode?
Is the computer clock accurate?
73, Ron WA2EIO
On 2/24/2021 11:22 AM, Eugene Oliva wrote:
I have not operated FT8 in a long time. Using WSJT-X. I have all
parameters set up and COM responds
Not just the levels but the right input source on the K3?
73,
Rick NK7I
On 12/11/2020 12:28 PM, Don Wilhelm wrote:
Joe,
Do you have the audio levels set right for transmit?
Go to my webpage www.w3fpr.com and look at the last article in the
left column.
73,
Don W3FPR
On 12/11/2020 3:10
Personally (and this varies with every setup) I usually run with the sound
card output level about 1/3 of the way, the level in WSJT-X about 1/3 of
the way up then adjust the mic (line-in) to get the 4 bars plus a flicker
level on the ALC meter. You do not want any of the levels to be too near
Joe,
Do you have the audio levels set right for transmit?
Go to my webpage www.w3fpr.com and look at the last article in the left
column.
73,
Don W3FPR
On 12/11/2020 3:10 PM, Joe K2UF wrote:
I am trying to get FT8 running on my K3 using Rig blaster advantage.
Everything works except no
I am running with no interface, an d all works well here. You might
consider re-configuring to not use the Rigblaster.
73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist, RFI
ARRL Asst. Director, NW Division, Technical Resources
On 12/11/20
Vox on Joe?
On 11/12/2020 12:10 p.m., Joe K2UF wrote:
I am trying to get FT8 running on my K3 using Rig blaster advantage.
Everything works except no transmit RF output.
Enable TX puts K3 into transmit but no RFoutput. Have tried adjusting RBA
xmit level and K3 mic output. No joy.
Jim,
That may work OK for non-Elecraft gear, but with the power control
mechanism used by Elecraft, not having sufficient audio drive will cause
"power hunting". Drive the soundcard audio for digital modes to 4 bars
solid with the 5th flashing on the ALC meter. Then set the power knob
for
Another thing to remember is that you are generating a signal in single
sideband mode. You can also get a pretty good setting by increasing the
gain until it just gets to the power level you have set on the RF out
meter. That is what I do on some of my non-Elecraft rigs. Your level then
should not
It has been doing well with the settings I posted. One of the schools of
thought is to use the most gain in the final stage, which should be the
line gain on the K3.
With the KIO3B the levels on the computer, Windows volume & Pwr slider in
WSJT-X should be known quantities. I suppose, OS &
Remember also, if the output level from the computer is too
high, then it may not be possible to get the 4 bars steady, 5th
flashing by adjusting the radio line in gain. This is because a
change of one in the line in on the radio gives you either 4
bars steady or 5 bars steady. Cutting down
On 11/26/2020 1:43 AM, LDE wrote:
Line In Gain = 40 seems too high to me.
Numerical values are pretty much meaningless. The values cited simply
indicate that levels coming out of the computer are fairly low, so more
gain is needed in the Elecraft input stage.
73, Jim K9YC
Thanks all. As always the fine folks on this list came through again!
Up and running now.
Rich
On 11/12/2019 23:38 PM, Don Wilhelm wrote:
Rich,
Online "answers" that are not K3 specific are often incorrect.
You must drive the audio so that you have 4 bars shown on the ALC
mater with the
Rich,
Online "answers" that are not K3 specific are often incorrect.
You must drive the audio so that you have 4 bars shown on the ALC mater
with the 5th bar flashing. That is the NO ALC point for the K3/K3S/KX3/KX2.
Once you have achieved that condition, leave the audio level fixed and
an.qth.net>
> [mailto:elecraft-boun...@mailman.qth.net
> <mailto:elecraft-boun...@mailman.qth.net>] On Behalf Of James Bennett via
> Elecraft
> Sent: Thursday, November 1, 2018 6:08 PM
> To: Elecraft Reflector Reflector <mailto:elecraft@mailman.qth.net>>
> Subjec
On 11/1/2018 4:07 PM, James Bennett via Elecraft wrote:
Clark - listen for them on 17 meter CW.
They went QRT yesterday to beat some heavy WX that was coming in.
They're probably all on the boat by now.
73, Jim K9YC
__
Elecraft
Clark - listen for them on 17 meter CW. I tried and tried on 20 and 40 CW one
evening last week with no success. On a whim I went up to 17 meters at about
7:00pm local time and there was VP6D calling CQ with very few takers. And the
folks he did pick off I was not able to hear. With my K3/100
This is to close out this thread.
Thanks to all who responded with suggestions all of which I had tried
including setting up the software exactly as defined on the VP6D website and
I never heard VP6D so I never called as they had requested. When I heard a
local ham get get them on one call, and
On 10/30/2018 12:30 PM, Andy Yates wrote:
Follow their directions here:
https://vp6d.com/index.php/dxpedition/ft8-operating-guidelines
The executive summary -- Use WSJT-X version 1.9, NOT 2.0 betas. They are
working DXpedition mode on all bands EXCEPT 160M. To enter DXpedition
mode, go to
with its transmitted messages ???
Don, N5LZ
Sent from Mail for Windows 10
From: Carl Yaffey
Sent: Tuesday, October 30, 2018 8:27 AM
To: engineercm
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 FT8 Problem VP6D
I worked them. Like you, I heard many “hounds” and no VP6 for quite a while
FWIW ... K1JT in the FT8 DXPedition mode user guide specifically says,
if you can't hear the DXPedition station, don't call them.
Item #7 for hounds says:
"Please do not call Fox if you are not receiving his transmissions. Do
not call Fox if he issues a directed CQ (“CQ EU”, “CQ 7”, …) and
If you're talking about yesterday [Mon], they were completely off the
air for a couple of hours midday here on the western frontier.
73,
Fred ["Skip"] K6DGW
Sparks NV DM09dn
Washoe County
On 10/30/2018 7:25 AM, Carl Yaffey wrote:
I worked them. Like you, I heard many “hounds” and no VP6 for
Follow their directions here:
https://vp6d.com/index.php/dxpedition/ft8-operating-guidelines
Andy - W4KIL
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
download and try WSJT-X 2.0 rc3 that is the latest I thought there is a
difference between 1.9 & 2.0
Ed KD7PY
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home:
Sent from Mail for Windows 10
From: Carl Yaffey
Sent: Tuesday, October 30, 2018 8:27 AM
To: engineercm
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 FT8 Problem VP6D
I worked them. Like you, I heard many “hounds” and no VP6 for quite a while.
Then suddenly, there they were, responding. I
…. And apparently something different that
VP6D seems to be doing with its transmitted messages ???
Don, N5LZ
Sent from Mail for Windows 10
From: Carl Yaffey
Sent: Tuesday, October 30, 2018 8:27 AM
To: engineercm
Cc: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 FT8 Problem VP6D
I worked them
I worked them. Like you, I heard many “hounds” and no VP6 for quite a while.
Then suddenly, there they were, responding. I think it’s propagation. Keep
calling.
73
> On Oct 30, 2018, at 10:00 AM, engineercm wrote:
>
> I'm not able to decode any transmissions from VP6D but can decode
>
If your WSJT-X is enabled to CAT control your K3, WSJT-X change VFO frequency
on transmit so that FT8 AF frequency into K3 is center of TX filter.
However, before WSJT-X has this feature, I did not have any issue on
transmitting < 900Hz AF.
Are you using DATA-A mode on K3 for digi-mode? If you
Is the WSJT-X application setting in the F2 menu under Radio set for
MODE = Data/Pkt and that the Split Operation set to RIG? This keeps the
transmit tones correct within the passband of the SSB filter. Here in
this application SPLIT is not the same principle as split when working
DX. SPLIT
Thanks to Dave N4DB for the tip!! It was just the MIC gain level. I can
now TX. So hopefully I am on my way!!
TNX Will WC2L
On 5/24/2018 6:38 AM, William Liporace wrote:
Good Morning,
I have been looking and without success been able to get the K3 to TX
on FT8. I do have the Enhanced I/O
Will,
Does the K3 go into transmit? If so, set the audio levels correctly.
You must achieve 4 bars solid on the ALC meter with the 5th bar
flashing. There are guidelines for doing that on my website www.w3fpr.com.
Scroll to the bottom article in the left column and click on the link.
73,
On Mon, May 14, 2018 at 8:01 AM, Alan Ibbetson wrote:
> ...I now see that this is a well known and widespread problemdiscussed
> for example here
>
> https://en.wikipedia.org/wiki/Dither
>
> ...On 14/05/2018 12:52, Gordon LaPoint wrote:
>
>> The problem was discussed in this
Thanks for this, Gordon. I failed to search properly and missed that
previous thread. Elecraft ought to at least acknowledge and document the
issue even if they don't fix it. I did some googling and I now see that
this is a well known and widespread problem. It seems to have a well
known set
The problem was discussed in this thread last year.
http://elecraft.365791.n2.nabble.com/K3-Odd-ALC-behavior-td7633052i20.html
Gordon - N1MGO
On 05/14/2018 03:05 AM, Alan Ibbetson wrote:
Don,
I'm puzzled you when you say
"If it were a K3 problem, that aliasing would also be happening with
This problem has been reported in the past, and is known to be a K3
problem. Just choose a slightly different audio frequency
for the tune up.
It does show up with other sound card modes.
As far as I know ALL K3's have this "problem".
My K3 (sn 5540 or so, not at home and don't remember
Alan,
How high is the input level to the K3 Line IN? I am wondering if you
are driving the transformers in the audio in slightly into saturation.
Try lowering the soundcard output and increasing the LINE gain.
73,
Don W3FPR
On 5/14/2018 3:05 AM, Alan Ibbetson wrote:
Don,
I'm puzzled you
Don,
I'm puzzled you when you say
"If it were a K3 problem, that aliasing would also be happening with
other data modes as well. Other soundcard data modes do not have a
problem with a TUNE at 1000 Hz"
I can reproduce this problem with my K3 with MMVARI on other data modes.
I have tried
I should have said that this explanation is only valid with WSJT-X split mode
is not in use. When split mode is used the situation is either simpler or
more complex depending on your perspective.
In WSJT-X split mode the audio frequency is constrained to the range 1500-2000
Hz. If the TX
Alan,
That is getting into issues associated with WSJT-X and FT8.
My website article is written to apply to all soundcard data modes and
not FT8 specifically. There was no intention for addressing all the
various data modes that could be used. All of them require the right
amount of audio
Don,
I suggest you need to draw attention in your web page and general advice on
here to the requirement to choose the AUDIO FREQUENCY with some care when
setting up ALC for FT8 via the TUNE button in WSJT-X.
The problem seems to be that the DSP sampling rate inside the K3 must not be
related to
That is www.w3fpr.com.
Scroll the left column to the lat article and click on the link for the
how and why of setting the audio level for TX 4 to 5 bars on the ALC meter.
I am much older than the assignment if "WA" callsigns. Got my 60 year
ARRL pin.
73,
Don W3FPR
On 5/8/2018 10:11 PM,
Start with the Elecraft K3S manual section on DATA modes with soundcardx.
Don’t worry about the time on the radio, the important clock is the one on the
computer. TX and RX must start on time with everyone else. Rest the correct
time just before each session from Windows clock settings or
Tnx Fred.
Tony
From: Cady, Fred [mailto:fc...@montana.edu]
Sent: Monday, May 07, 2018 6:54 PM
To: N2TK, Tony <tony@verizon.net>; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 - FT8
File -> Settings and then you will see General.
Cheers,
Fred KE7X
Meinberg NTP for time sync.
I used to use Dimension 4 but the consensus seems to be Meinberg is better.
Never had issues with either.
73,
Josh W6XU
Sent from my mobile device
> On May 7, 2018, at 3:40 PM, N2TK, Tony wrote:
>
> Finally setting up FT8. I downloaded
File -> Settings and then you will see General.
Cheers,
Fred KE7X
From: elecraft-boun...@mailman.qth.net on
behalf of N2TK, Tony
Sent: Monday, May 7, 2018 4:40 PM
To: elecraft@mailman.qth.net
Subject:
Glad you got it resolved. Yes, yes, yes, running VOX and CAT can be a
problem. Choose one...but NEVER both.
73
Bob, K4TAX
On 2/23/2018 4:14 PM, eric norris via Elecraft wrote:
After reading all the posts on this I 1) reduced tx delay from .2 to .1 on the
ADVANCED tab, and 2)
48 matches
Mail list logo