Richard,
Well, the loud pop was most likely one PA transistor exploding, so I
expect you will have to replace Q7 and Q8 as well. If you remove the
heatsink, you will likely see one of the PA transistors damaged.
Yes, replace Q11 and Q13 together.
Get the K2PAKIT from Elecraft - that kit has
Richard,
If you do not have good de-soldering tools, be careful when removing
components. There is no sense in removing the component intact. The
board is more valuable than any component.
Cut off the leads close to the component body (or crush the component
with pliers if necessary so you
>>http://www.elecraft.com/manual/PX3_installation_FAQ_v-0-8.pdf see Figure 3.
>When I tried that, I got no output from the KXPA100 with the KX3 PA MODE set
>to ON. If I set that to OFF, I get full output but then not full interaction
>with the KX3. What am I doing wrong?
So are you saying
On Fri,12/30/2016 6:02 AM, Michael Babineau wrote:
Anyone interested in EFHW antennas should read Steve, AA5TB’s excellent website
Here's another great way to end feed a half wave that Steve didn't think
of. It originated with an idea that N6LF published.
http://k9yc.com/VerticalDipole.pdf
Hello everybody,
I have a friend's KFL3A-400 on my bench which shows a 20 dB passband
attenuation with
high ripple. The fault was originally detected by a 3 S units signal drop in
the K3
compared to its other crystal filters. The filter was working perfectly until
recently.
I disassembled
Now more than ever there is a need for a 1500 watt amplifier of the quality and
function of the KPA500. PLEASE, Elecraft, reconsider your decision to produce a
KPA 1500. You could use the front end of the KPA500 as a controller?
Fred Serota, K3BHX
Excellent Don,
Many thanks for your quick response, I'll start as soon as I can.
Happy new year and 73s
Richard M0AUW
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Q11-Blown-tp7625179p7625183.html
Sent from the Elecraft mailing list archive at Nabble.com.
The KX3 says it has the KXPA100 behind it, but I still get no output. When I
turn PA MODE to OFF, and turn the amp ON using the front panel switch, I get
full output but in Basic mode.
73 Ray W2RS
-Original Message-
From: Cady, Fred
To: rsoifer1
Anyone interested in EFHW antennas should read Steve, AA5TB’s excellent website.
http://www.aa5tb.com/efha.html
Some of the currently available EFHW tuners (QRPGuys& QRPkits SOTA )
use the tapped inductor approach, but I much prefer Steve’s idea of using a
transformer.
The advantage is that it
Hi Dick,
When I tried that, I got no output from the KXPA100 with the KX3 PA MODE set to
ON. If I set that to OFF, I get full output but then not full interaction with
the KX3. What am I doing wrong?
73 Ray W2RS
-Original Message-
From: Dick Dievendorff
To:
I wonder if the difference in opinions has to do not with right or wrong as a
matter of physics but rather with the customary use of terminology. As I have
understood it, the phrase “velocity factor” is ordinarily used in connection
with transmission lines; AND it is the case that the velocity
Ray,
Check to be certain the RJ-45 connectors are fully plugged in. Some of
them are difficult to seat if you hold onto the cover boot. Pull the
boot back and push the plug itself in until it clicks.
Make sure the other plugs are fully seated - give them an extra push
into their jacks.
Marcus,
You might want to query the folks at Inrad - they build the 8 pole filters.
You would need to replace all the crystals with a matched set, so it may
be better to buy a new filter.
73,
Don W3FPR
On 12/30/2016 8:18 AM, Marcus Busch [DL1EKC] wrote:
Hello everybody,
I have a friend's
I've been using the PX3 with my KX3 for a year now, with no problems. I've now
added a KXPA100, and find that either I can have full functionality of the
amplifier, or of the panadaptor, but not both at the same time.
I've set up the system for full functionality of the PX3 and "Basic"
Hi Ryan,
Yes, I am using the control cable.
73 Ray
-Original Message-
From: Ryan Noguchi
To: rsoifer1 ; elecraft
Sent: Fri, Dec 30, 2016 8:43 am
Subject: Re: [Elecraft] KXPA100 with PX3
The P3 is sold>
Joe N9VX
On Fri, Dec 30, 2016 at 4:30 AM, Joe Word wrote:
> Email corrected...
> For Sale Elecraft P3-F factory built panadapter in as new condition with
> optional P3SVGA adapter for computer monitor use. No scratches and has not
> been around tobacco
Ray: Hope this helps:
http://www.elecraft.com/manual/PX3_installation_FAQ_v-0-8.pdf
see Figure 3.
73 de Dick, K6KR
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Ray
W2RS via Elecraft
Sent: Friday, December 30, 2016 06:38
To:
The mini plug by my measurement is 2.4 mm at the shaft not slotted and ~ 2.5
mm near the tip, the slotted section at its widest.
73,
Bill
K9YEQ
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Bob
Nielsen
Sent: Friday, December 30, 2016 1:40 AM
To:
Make sure all of the plugs are fully seated in their sockets.
73,
Fred KE7X
For all KE7X Elecraft books, see www.ke7x.com
From: Elecraft on behalf of Ryan Noguchi via
Elecraft
Sent: Friday,
You may simply have the power set too low (below 11W) for the KXPA100 to turn
on.
73 Dave AD6A
Sent from my iPhone 5s
> On Dec 30, 2016, at 9:22 AM, Don Wilhelm wrote:
>
> Ray,
>
> Check to be certain the RJ-45 connectors are fully plugged in. Some of them
> are
On Fri,12/30/2016 10:27 AM, Dean L wrote:
500w 》1500 w -It's less than an S-unit increase in signal
Anyone who has tried to work a station who doesn't hear well because of
a high noise level, or with a poor signal path, knows that even 1 or 2
dB can be the difference between making a QSO
On Fri,12/30/2016 10:30 AM, ken mcmahon wrote:
Page 18 of the KSB2 manual shows info for the MC-60 and I don't want to
assume it matches the MC-50.
Ken,
Connector pin-outs tend to be consistent within a brand of radio.
Kenwood, Icom, and Yaesu each have their own way of doing it, and they
Further to my last email, when I am in Basic mode, with PA MODE set to OFF and
the KXPA100 on/off switch set to ON, I get full power out and no dissipation.
When PA MODE is ON and the on/off switch set to OFF, the KX3 acts like the
KXPA100 is connected to it but there is no power output from
Sorry Jim, you're mistaken on many counts.
An antenna does not have VF, but the wire we use for it does. VF of an
infinitely thin bare wire in free space is 1. Surrounding it with a
dielectric (insulation) makes it longer electrically, usually by a few
percent. So does making the wire
I would like to use a coaxial switch for an unintended use and I'm not
sure if it's a good idea in terms of RF isolation and potential
equipment damage.
I'm no expert in this area but I know this list is a wealth of expert
opinion, so here's my question:
I want to buy a two position
Sorry, Jim, you are misquoting the wrong guy. Tweren't me, McGee.
73 Jim Allen W6OGC
> Message: 24
> Date: Fri, 30 Dec 2016 13:25:28 -0800
> From: Jim Brown
> To: elecraft@mailman.qth.net
> Subject: Re: [Elecraft] Small QRP antenna
> Message-ID:
>
That will be a lot of money for only an extra S unit (barely). Just over a 4db
gain off the top of my head.
It is the first 500 W that count.
Mike va3mw
> On Dec 30, 2016, at 1:27 PM, Dean L wrote:
>
> Fred
> 500w 》1500 w -It's less than an S-unit increase in
I agree. German HK3J
El vie., 30 dic. 2016 3:18 p. m., Guy Olinger K2AV
escribió:
> On Dec 30, 2016 12:36 PM, "Fredric Serota" wrote:
> > Now more than ever there is a need for a 1500 watt amplifier of the
> > quality and function of the KPA500. PLEASE,
The same argument goes for any 3:1 power ratio, but Ham radio is about having
fun and if someone has more fun with QRO within legal limits, why not?
In the 1960's I added a new final to a homebrew CW rig and went from 100 mW out
to a full 1 Watt as soon as a suitable transistor became
Interesting... Not knowing much about the architecture, isn't most of the
hardware already on board to send samples out the USB?
Looking at the KX3 block diagram [1], I'm curious why you couldn't move
digital I/Q samples from the DSP to the PIC, then in/out to the USB port.
While I'm sure the
Dave,
Whatever it is, there will be no hyphens in the designation. Elecraft
does not use hyphens in its product names (other than the N-Gen and
2T-Gen mini-modules).
73,
Don W3FPR
On 12/30/2016 5:25 PM, Dave Hartzell wrote:
Thanks Don. Maybe someday it will be supported on the KX3-S (or
Stan,
If your maximum power is 100 watts and the isolation of the switch is
40dB or more then I don't think you have any problem.
73,
Don W3FPR
On 12/30/2016 5:49 PM, stan levandowski wrote:
I would like to use a coaxial switch for an unintended use and I'm not
sure if it's a good idea in
Fred
500w 》1500 w -It's less than an S-unit increase in signal and makes
your power meter spin fast.
Just putting it into perspective ...I'm sure you already knew this.
Happy New Year/73
Dean K2WW
On Dec 30, 2016 12:36 PM, "Fredric Serota" wrote:
> Now more than ever there
I kinda like the remote amp thought; My wife loves the heat and I like it cool.
I could put the amp in her craft room and let her enjoy the extra heat while my
shack stays cooler.
From: Fredric Serota
To: "elecraft@mailman.qth.net"
Sent:
Dave,
I seriously doubt it. If you look inside the KX3 or the KX2, there is
not much space.
Secondly, the way the KX3, PX3 and KXPA100 'string together" for the
RS-232 (ACC1) connections, both the PX3 and KXPA100 would have to change
to support USB and audio. So I don't think that is going
Nice!
Perhaps y'all will consider working up a promo for a KPA500/KAT500 combo
in the future
__
Clay Autery, KY5G
MONTAC Enterprises
(318) 518-1389
On 12/30/2016 5:35 PM, Eric Swartz - WA6HHQ, Elecraft wrote:
> Countdown to 2017! Don't miss out on the K3S Bundle Offer -
If you're being heard at 20 dB over S9 when running one kilowatt, you'll still
be S5 at 100 milliwatts!
That said, if you're gonna run an amp, why not go for max legal?
73, Charlie k3ICH
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Dean L
Dave,
First of all, the audio for digital operations needs to come from the
phones and mic lines. The RX I/Q is taken off before any DSP Processing
so the bandwidth is not restricted by the filtering done in the KX3. In
other words, the RX I/Q is not simply audio - it may be at baseband,
During mediocre conditions there has been more than once on 80 and 160M the DX
could not quite get my call correct with the KPA500. Once the Acom 2000A timed
out they had no trouble copying my call. Most of the time I operate the K3
barefoot. When I need more oomph I turn on the KPA500. If
Thank you, Don. An Alpha Delta has that isolation. I thought it would be
OK but as a hobbyist and not a pro, I don't know what I don't know.
Happy New Year.
Stan WB2LQF
On Fri, Dec 30, 2016 at 06:44 PM, Don Wilhelm wrote:
Stan,
If your maximum power is 100 watts and the isolation of the
I can tell you, I have a lot of 50 MHz DX in the log that a home brew 4CX-1000A
made possible.
Unlike HF DXing, some six meter ES & F2 openings last only a few minutes, and
the early bird + big amp, gets the proverbial worm.
I am definitely NOT opposed to running high power.
My only piece of
I have a P3SVGA with P3TXMON and DCHF-2000 (160m - 6m 2000 KW Directional
Coupler).
The P3 is S/N 37xx and everything works perfectly, and is in as-new condition
with no scratches/dents etc., and lives in a non-smoking home.
I don't use the SVGA option or the directional coupler, so I would
Folks, we have not ever formally said we would never do a 1500W amp. We have
said at times in the past that we were not doing one at that time, but we never
rule anything out.
We're always looking for good suggestions and marketing input on what we should
do in the future.
73,
Eric
My experience matches this precisely.
~35 years ago, I built the huge quad described in "Evolution of a Quad Array"
from an article in QST, May 1978, IIRC. It was done with help from experienced
antenna builders, measured very meticulously. When we finally got it up on the
tower, it was
On Dec 30, 2016 12:36 PM, "Fredric Serota" wrote:
> Now more than ever there is a need for a 1500 watt amplifier of the
> quality and function of the KPA500. PLEASE, Elecraft, reconsider your
> decision to produce a KPA 1500.
Without debating how much use is had from a 5 dB
As long as there is sufficient isolation in the switch there should be
no problem. I have done exactly as you describe with my KX2 and IC-7100
using a MFJ-1702C switch, which is rated for better than 60 dB of
isolation to 300 MHz.
Bob, N7XY
On 12/30/16 2:49 PM, stan levandowski wrote:
I
Thanks Jim,
I should have mentioned;
I already have the 8 pin DIN connector at the rig end of the mic cable.
However, I don't know what the pin-outs are.
I've Googled it to no avail...
Page 18 of the KSB2 manual shows info for the MC-60 and I don't want to
assume it matches the MC-50.
Thanks,
How are you turning the KX3 and KXPA100 on and off. If you shut down the
power supply with the KX3 powered on, it will default to PA off and power
our <10 watts and stay that way until you manually go back and turn PA on
and change power level on KX3 to require the amp to be on. You should
A multitude of microphone information can be found at
http://www.qsl.net/g4wpw/date.html. Thank QSL.net for preserving this
website information, G4WPW is now SK.
73,
Don W3FPR
On 12/30/2016 1:44 PM, Jim Brown wrote:
On Fri,12/30/2016 10:30 AM, ken mcmahon wrote:
Page 18 of the KSB2 manual
Ryan,
Yes, I am using the correct adapter cable.
73 Ray W2RS
-Original Message-
From: Ryan Noguchi
To: rsoifer1 ; elecraft
Sent: Fri, Dec 30, 2016 8:43 am
Subject: Re: [Elecraft] KXPA100 with PX3
>Further to my last email, when I am in Basic mode, with PA MODE set to OFF and
>the KXPA100 on/off switch set to ON, I get full power out and no dissipation.
>When PA MODE is ON and the on/off switch set to OFF, the KX3 acts like the
>KXPA100 is connected to it but there is no power output
I have no interest in a 1 or 1.5 KW Amp.
Guy (K2AV) sums it up nicely.
73!
Ken Kopp - K0PP
On Dec 30, 2016 1:18 PM, "Guy Olinger K2AV" wrote:
> On Dec 30, 2016 12:36 PM, "Fredric Serota" wrote:
> > Now more than ever there is a need for a 1500 watt
Ray,
Does the power light on the KXPA100 turn on when you power on the KX3?
I am not sure about your statements about "all the power it produces is
being dissipated"
Dissipated where? Into power output or into heat? Does the heatsink
heat up?
Similarly, your statement about "no power
I'm not sure what the upgrade and refresh cycle is for the KX3, but I'm
wondering if there will ever be KIO3-like capability added to the KX3 (or
KX2).
Mainly so the radio shows up as a sound card over the USB...
Dave
ad0qe
__
Elecraft
Note that many antenna switches short the in-used antenna to ground so you
would be shorting the output of the in-selected radio to ground. NOT a good
idea.
MFJ makes a switch that connects 2 radios to 3 antennas. Flip the switch and
the antennas are switched to the other radio. Put a dummy
You should know that DEMI can install (and probably sell as a kit for you to
install) the ApolLo synthesizer board inside of Elecraft transverters. I asked
Steve at DEMI some time ago if it would be possible, and he asked me to send
him my XV222 transverter. Within a few days, I received it
That may be one difference. But having been a pro who got paid for
giving advice about things that matter to a client, what being a pro has
always meant to was to make sure that I was
1) Never giving advice you were not certain of; and
2) Always ready to say "I don't know, but I'll find out;"
SOLD!
Sent from my iPhone
===
Carl Jón Denbow, N8VZ
17 Coventry Lane
Athens, Ohio 45701-3718
c...@n8vz.com
www.n8vz.com
EM89wh
IRLP 4533 Echolink 116070
PSK and JT65 Forever!
===
> On Dec 20, 2016, at 8:30 PM, Carl Jón Denbow
T-shirt the other day:
MECHANIC
Curious enough to take it apart
Professional enough to put it back together
Smart enough to hide the extra parts
73,
Fred K6DGW
Sparks NV USA
Washoe County DM09dn
On 12/30/2016 4:59 PM, Don Wilhelm wrote:
Ron and all,
I would differ from that a little bit.
Since the radio is not really that modular I'd not hold my breath. The K3 had
several boards that made up the KIO3 module.
Sent from my iPhone
...nr4c. bill
> On Dec 30, 2016, at 3:54 PM, Dave Hartzell wrote:
>
> I'm not sure what the upgrade and refresh cycle is for the
With a little work, KPA500 can be a KW amp while losing weight. This is by
using LDMOS and a commercial PS. But then KAT500 would have to be beefed up
to KAT1000.
I have Expert 1.3k that I use with KX3 for > 1 KW. The Expert is 21 lbs
(lighter than Elecraft) with a 3:1 tuner + 4 antenna switch
For Sale Elecraft P3-F factory built panadapter in as new condition with
optional P3SVGA adapter for computer monitor use. No scratches and has not
been around tobacco smoke. Serial number 36xx. No longer have a K3, so
selling the P3. Comes with original box, manual and cable set: RF cable,
data
Email corrected...
For Sale Elecraft P3-F factory built panadapter in as new condition with
optional P3SVGA adapter for computer monitor use. No scratches and has not
been around tobacco smoke. Serial number 36xx. No longer have a K3, so
selling the P3. Comes with original box, manual and cable
Hi Don et all,
My own stupid fault, I was tuning up my other transceiver and forgot the K2
(fitted withK2/100) was still on and something went bang! On checking the K2
there was no transmit, receive was ok. I traced the fault back and found
that *Q11 had blown*.
I cannot visibly see any other
Hi Al,
Thanks for your answer. Can't explain the logic behind this behavior. Would it
be a bug in firmware?...
Maybe this could be on the wish list then. For both requests ("nor" stereo AFX
*and* low digital level).
Santa's gone, but who knows?
Best 73,
Christian F1GWR
Le 30 déc. 2016 à
65 matches
Mail list logo