I am offering for sale or trade an assembled Elecraft KRC2 Band Decoder /
Antenna Relay Driver and homebrew 8-port remote coaxial switch that are
surplus to my needs.
Neither the KRC2 nor the relay box have ever been used or mounted outside in
the weather.
The KRC2 Band Decoder is a
Telepost LP-PAN 2 Software Defined IQ Panadapter for K3 - $190 (shipped)
.Excellent condition. Factory assembled. User supplied cables.
.Visit http://www.telepostinc.com/LP-PAN.html
http://www.telepostinc.com/LP-PAN.html to see if this will work with your
rig
.
I use RMS Express with my K3 KX3 and wonder if I am the only one that has a
problem.
Every time RMS Express changes the radios frequency it also changes the mode to
USB.
I have to then change it to DATA so the TX RX equalizers are centered, PTT is
selected, levels are properly set and on the
Works FB here. In Setup - Radio Setup there are selections for USB or
USB Digital, I have mine set to USB Digital. When I shift bands the
radio is placed into Data mode.
73, Dennis NJ6G
__
Elecraft mailing list
Home:
Hi John,
In the TNC settings, you can check the box (for Elecraft Radios) that
indicates USB-Digital. This will cause the TNC to set the K3 or KX3
to DATA A mode.
There should be no changes needed to TNC module. The TNC has had this
setting since at least 2010, but only for transceivers that
KRC2 and Coax Switch have been sold and are no longer available.
Thanks to all who replied.
n Andy, KD3RF
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Early versions of the K3 DSP firmware allowed direct PSK via the FSK
input pin on the ACC connector. Since no application software was ever
written to support this mode, it was deleted.
So, the documentation in the manual is correct for early code but was
not edited to keep pace with the
Thanks for the clarification!
have a safe and happy new year!
jim ab3cv
On Thu, Jan 2, 2014 at 10:58 AM, Lyle Johnson kk7p4...@gmail.com wrote:
Early versions of the K3 DSP firmware allowed direct PSK via the FSK
input pin on the ACC connector. Since no application software was ever
Did not have all the options listed.
Very Nice K2/10 with the following options installed:
KIO2 serial interface,
Serial Cable for computer control,
KAT2 Automatic Antenna Tuner
KSB2 SSB,
K160RX 160 meter,
KNB2 Noise blanker,
KDSP2 advanced DSP filters,
FDIMP finger dimple,
KBT2 internal
I assume this is when using a voice mode. If so, turn the monitor down
or off.
73,
Don W3FPR
On 1/2/2014 1:14 PM, Dick Brown wrote:
I am getting audio feedback via the speaker when I transmit on K3. What's a
way to solve this.
KT6X
I am getting audio feedback via the speaker when I transmit on K3. What's a
way to solve this.
KT6X
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
I had a similar experience. I sent my K3 back to the factory a couple of weeks
ago. When I took it to the UPS shipper here, he had to call UPS for special
instructions since the declared valued was so high. I had it packed in the box
Elecraft sent it back to me the last time I sent it in. UPS
I expect, that like YAESU, Elecraft self-insures, ergo the lower
shipping cost.
Insurance is quite profitable to most carriers, especially since they will
fight you for every dollar !!
73, Dick, W1KSZ
On 12/31/2013 11:20 AM, John's email wrote:
I had a similar experience. I sent my K3 back
Is anybody on this list headed to Quartzfest 2014 this year?
73
Gary
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I'll be there for two days. Look for the Navy-Marine Corps MARS
location. We'll be doing a couple night time slideware presentations
as well, and these will show up on the Quartzfest schedule.
73,
matt W6NIA
On Thu, 2 Jan 2014 11:49:56 -0800, you wrote:
Is anybody on this list headed to
On 12/31/2013 10:20 AM, John's email wrote:
I sent my K3 back to the factory a couple of weeks ago. When I took
it to the UPS shipper here, he had to call UPS for special
instructions since the declared valued was so high. I had it packed
in the box Elecraft sent it back to me the last time
I have used FedEx locally when shipping a variety of items, including some
pretty pricey ham gear, as well as some pretty pricey pieces of art.
When I have gone to the local KINKOS, they REQUIRE that they box it, and
double box it if the value is above some specific amount. I recently
needed to
I have sent items back in the manufacturers case only to have them returned
to me after repair or whatever in a different carton altogether (NOT
necessarily as sturdy or well padded as the original I had used). What done
you do to get them to return the Pelican case instead of a cardboard box? I
I Purchased 5 used Mini Circuits 3dB splitters from China for about $28 on eBay
including shipping from half way round the world.
5-500 MHZ with SMA connectors
Model ZFSC-2-1
Lots of uses for them, splitting 10MHz standards, dual receivers on single
antenna etc.
I did previously build a 3dB
K2/10 #5279, sold!
73! Tomy Ivan KF7GC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Can anyone help me with setup parameters for JT65HF when using the KX3?
Any tips and guidelines will be greatly appreciated.
Ariel NY4G
Sent from my iPad
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
21 matches
Mail list logo
