Tap:
Peak
MKRA
zeroWfallMkrs
NB En
Hold:
Freeze
MKRB
zeroWfallAvg
Reset
You probably don't want to put Reset in your lineup. I do a lot of
firmware testing for the developers.
73,
matt
W6NIA
On Sun, 23 Aug 2015 20:48:17 -0500, you wrote:
Anyone have any suggestions with regard to what
Anyone have any suggestions with regard to what favorite functions to assign
to the P3 buttons.
I have one button assigned to RESET that is handy when I use the P3 to
see my transmitted signal (like the received ones). Handy for judging
your TX EQ settings.
Jim - W4RKS
I doubt the owners will even consider doing such a thing.Surprised that anyone
would propose doing this.I am a reader and not a poster to every subject.
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Reading the manual I see there's an audio equalizer feature to tune the audio
to our liking. Is it possible when using subrx to independently adjust the
equalizer for each ear? I ask because I have some hearing loss at some
frequencies from my time in the Navy. As a result, sounds are often
All,
FYI I've got a response from Microham as well, expanding Joe's response:
- direct INH connection to K3: OK if Station Master has at least Hardware
revision 4
- SM grounds Inhibit output when everything is OK
- SM is pretty conservative and will set Inhibit for any non-normal condition,
Brian,
I had this happen to me one time.I believe it was trying to find the
KAT500 on a port that was no longer the correct COM port. A device was
there but it wasn't the KAT500.Try unplugging all other USB devices
that you can, leaving only the KAT500 connected, and start the
I've read where it can be used for easy/quick band/mode shortcuts. Typically
you'd want to automate anything that requires multiple button presses and
you often use that setup.
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of James
Wilson
Sent:
And of course there is a group dedicated to the Elecraft KX-Line (KX3,
KXPA100 PX3) at:
https://groups.yahoo.com/neo/groups/KX3/info
https://groups.yahoo.com/neo/groups/KX3/info
We welcome all who are interested in this great rig, as well as in the
KXPA100 and PX3! Given the KX-Line's
I have both units connected to win4k3.. the k3 on com 3 , the kx3 on com 4. I
am using com0com as my virtual port generator on com3 per Tom's advice.
The problem arises with the 3rd party software (LOGGER32) when I switch rigs.
com0com is working for the k3 on com 3 , but when I switch to the
Hi
I have replied off list.
Thanks
Sent from BlueMail
On Aug 24, 2015, 11:07 AM, at 11:07 AM, wgrav...@juno.com wgrav...@juno.com
wrote:
I have both units connected to win4k3.. the k3 on com 3 , the kx3 on
com 4. I am using com0com as my virtual port generator on com3 per
Tom's advice.
The
I don't get it.
Even for a whole day of mail for one of the busiest reflectors around, my
Gmail app for the iPhone will let me
delete out personally uninteresting email by subject line in less than 30
seconds.
Are some of us *offended* by seeing email we're not interested in? What's
going on?
I
Hi Jerry,
That's an interesting question. You can vary the volume of each receiver but
the settings you make in RX EQ apply to both receivers.
73,
Mike K2MK
ae4pb wrote
Reading the manual I see there's an audio equalizer feature to tune the
audio to our liking. Is it possible when using
Obviously you've never been in the military? (or forgot?)
The military is a big testing pool for idiots (please note the
quotes for idiot-its use is tongue-in-cheek). I used to work for
Hughes Aircraft writing tech manuals for the military. You could
not assume the operator knew anything
Let's end this thread at this time.
We prefer to keep the Elecraft list as our central and official gathering place
for info on all of our products. We always post here first when making new
announcements, and we also are not able to watch a multitude of different
fragmented lists 100%. We
I would like to split my K3's Rx feed to also feed my new SDRPlay SDR.
One way is to put a splitter (I'd use a mini-circuits ZFSC-2-1W+ or similar)
between the KXV3A's Rx In and Rx out ports and suffer the 3 dB loss (which
should be insignificant since my ambient noise is far above the K3's Rx
I want to trade my kx3 with the following options/ add ons:
KX3 ser # 500s
Options - all
Mic, battery chgr, dual roofing filter board, usb cable, internal tuner,
pckt accessory cables, KXPD3 paddles, KXPD3 upgrade kit,
Plus: sidekix and lexan cover ($70)
DC to DC converter (battery booster)
Jim,
You may not mind but it is a formal request by the moderator to do so.
I do filter, but not to delete messages. I use the filter option to have
the subjects split into different sub-folders, named with the
corresponding type of equipment.
Deleting what is not of my interest is still an
Hi,
Anyone got one of external reference boards (K3EXREF) that is no longer
required?
If so, let me know how much and approximate shipping cost to UK.
Thanks, Peter G4URT
__
Elecraft mailing list
Home:
Does anyone have a KAT2 auto tuner for the K2 for sale?
Martin, K5FLU
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
I use either an Edgeport 8-port USB to serial adapter, or a Gearmo 4-port USB
to serial adapter, or a KUSB or KXUSB depending on what I'm testing.
No USB hubs here, tho.
73 de Dick, K6KR
On Aug 24, 2015, at 18:57, David Ahrendts davidahren...@me.com wrote:
In a multiple Elecraft device
Thanks to Dwayne Rohmer for a very helpful suggestion which solved the
problem. I had, indeed, turned the CW monitor sidetone down completely,
and returning it to an audible state also returned the button beep to
operation as well. Kudos to the list for being a superb resource
Doug
K7IP
K3 Sn
Russ,
Are you trying to use your SDR as a Panadapter, or do you want to share
the antenna that the K3 is connected to with that receiver?
If you want to use it as a Panadapter, then you need to connect it to
the K3 IF output (assuming you have the KXV3A option installed).
If you want to
Hi to the group.
I have not wanted to get into this discussion but I have had a similar problem
with other programs and will throw this out just in case it is your problem. If
you have a second monitor and display that program on the second monitor the
program will not show up on the main
Warren:
FYI. I'm running into serial ports on the PC, not USB.
Brian KD0HII
-Original Message-
From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Warren
Merkel
Sent: Monday, August 24, 2015 07:21
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT500 Utility
All:
Thanks for the input. I've determined that I do indeed have a problem with the
4 port serial card. Thus, before going any further here, I'm going to run some
tests and see about getting the ports working properly.
73, Brian KD0HII
-Original Message-
From: Kenneth Christiansen
In a multiple Elecraft device station, I’m curious if anyone connects all KUSBs
to a USB hub semi-permanently so that when you need a connection you already
have that hardware access? Realizing you cannot run two Utility programs
simultaneously (at least I haven’t had success with that), what
Hmm .. I've not tried that. I'd be cautious trying
it. Really no need, after all.
73, Phil W7OX
On 8/24/15 6:57 PM, David Ahrendts wrote:
In a multiple Elecraft device station, I’m curious if anyone connects all KUSBs
to a USB hub semi-permanently so that when you need a connection you
For Sale Nice K2-100 with KAT-100 Tuner.Please see add at QTH.COM 73! KF7GC
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Yes, Phil, you’re probably right. Probably over-think here. But there are
KAT500 parameters that can be more easily managed in real time with the KAT500
Utility, so I thought I’d give it a try. Dunno, in the bigger picture, might
this be he precursor to the idea of software control or software
Hi to the group again
I have a USB hub with a USB to rs232 for my K3 and another for my KX3. I have
never tried to run both at the same time but they have both been on the same
hub for 2 years and they always work, Port 4 for one, Port 7 for the other and
Port 5 for the WinKeyer USB which I
30 matches
Mail list logo