Re: [Elecraft] WSJT-X and K3S Tx

Procedure should be same. Sent from my iPhone ...nr4c. bill > On Sep 13, 2016, at 5:42 PM, MaverickNH wrote: > > Vital detail omitted - I'm using WSPR-2 as the mode. > > > > -- > View this message in context: >

Re: [Elecraft] K3 and Power Poles

I see the recurring APP thread has once again raised its head and has again been beaten to death.. :-) Let's end the thread at this time, due to the very large number of posts on this topic, and the fact that exactly the same info is available in the archives from multiple past threads.

[Elecraft] KX2 + MH3 notes

Hi folks, I just got back from a weekend camping and hiking with my KX2. This was the first time I took the KX2 out with the bigger CS80 soft case, and I used the extra room mostly to carry my MH3 mic, which I kept when I sold my KX3. I thought I'd share my experiences, as they might be useful to

Re: [Elecraft] K3 and Power Poles

Sure. I buy black and white lengths of #10 stranded THHN (ordinary house wire) at the big box store, cut a length of each, put one end of both in a bench vise, the other in a drill, and twist it. Then let it sit overnight to let it set in position (it will untwist some, but not enough to

[Elecraft] K3 and Power Poles

And imperfect assembly is a mistake easily made. For the first year or so that I owned the K3 I had the problem of intermittent DC, requiring fiddling with the APP connectors until getting them positioned just right, only to have intermittent connections again whenever the rig was moved.

Re: [Elecraft] K3 and Power Poles

I need to point out that those retention clips will work fine when you are connecting two APP in-line connectors together, however, they cannot be fitted to the K3/K3S APP connector because the "retainer pin" hole is not accessible at the K3/K3S end. They are fine for connecting one APP cable

Re: [Elecraft] K3 and Power Poles

And there are retention clips. I have a couple black ones that came with some order at one time (RigRunner I think). https://powerwerx.com/powerpole-connector-retention-clip Dan KI6X -- Message: 4 Date: Tue, 13 Sep 2016 08:53:53 -0400 From: Ramon Tristani

Re: [Elecraft] K3 and Power Poles

There is a connect for ten gage wire. Sent from my iPad > On Sep 13, 2016, at 11:49 AM, John Pitz wrote: > > On the topic of Power Pole connectors, I have a crimper that if I > remember correctly I bought from West Mountain Radio. It looks pretty > similar to the

Re: [Elecraft] K3 and Power Poles

Hello all: David, K6SBA, most graciously shared the solution with me. Powerwerx (see their website) sells a plastic clip that ties the mating connectors together, preventing them from slipping apart and disconnecting. The clip can be easily removed if needed. I just ordered a few of the clips

Re: [Elecraft] K3 and Power Poles

I've done a lot of these. The simple solution is to strip enough of the insulation so that the completed pin fits into the housing. Also -- "zip cord" is a lousy choice for use in a ham station. Twisted pair is FAR better, because it inherently resists RF coupling. 73, Jim K9YC On

Re: [Elecraft] Elecraft Macro Maker

Neat! 73, Ron AC7AC -Original Message- From: Elecraft [mailto:elecraft-boun...@mailman.qth.net] On Behalf Of Nick Garner Sent: Tuesday, September 13, 2016 2:59 PM To: Elecraft Reflector Subject: [Elecraft] Elecraft Macro Maker Hi Everyone, I had an idea pop into my head over the

Re: [Elecraft] K3 and Power Poles

Completely agree! Soldering is effective, cheap and reliable if done right - as is crimping, bar the cost of the tool. W3HBM On 9/13/2016 5:07 PM, Ron D'Eau Claire wrote: FWIW, rather than invest in crimpers and practice as needed to get great crimps, I simply solder the wires into the

[Elecraft] Elecraft Macro Maker

Hi Everyone, I had an idea pop into my head over the weekend to put together an application to help with the composition of macros for use with Elecraft radios. Here's the result: http://pignology.net/emm 73, Nick N3WG __ Elecraft

Re: [Elecraft] WSJT-X and K3S Tx

Vital detail omitted - I'm using WSPR-2 as the mode. -- View this message in context: http://elecraft.365791.n2.nabble.com/WSJT-X-and-K3S-Tx-tp7622439p7622443.html Sent from the Elecraft mailing list archive at Nabble.com. __ Elecraft

Re: [Elecraft] K3 and Power Poles

FWIW, rather than invest in crimpers and practice as needed to get great crimps, I simply solder the wires into the terminals as recommended by Wayne. I place the terminals over the bare ends and solder, filling the part you might crimp with solder. It's useful to align the terminals correctly

Re: [Elecraft] K3 and Power Poles

Not going to get into pro-cons of PP but I have encountered issues trying to use No.10 zip cord from Powerwerx. Not a fault of the wire but insulation size is too big for many connectors. Wire is great from them - just wish shipping was cheaper. So I ended up using a short piece of No. 12

Re: [Elecraft] K3 and Power Poles

I believe the "click" Detrick refers to is when you insert the contacts into the connector housing. There's a nice document on-line showing the proper way to assemble them if you are "rolling your own" or need to check what you have. Notice the cutaway view on page 3. It shows the spring contact

Re: [Elecraft] K3 and Power Poles

If there isn't a solid click which putting the wire connectors into the holder, the mating plugs won't stay together, at least in my experience. Also, soldering can interfere with proper mating to the shell and both connectors as well. Bill K9YEQ -Original Message- From: Elecraft

Re: [Elecraft] K3 and Power Poles

You must place the terminal into the guide with the flaps up. I use tweezers to rotate it a few degrees clockwise so that the upper dies will not catch the left flap as it closes. Now insert the stripped wire till it stops and crimp. Should work every time. Sent from my iPhone ...nr4c. bill

[Elecraft] WSJT-X and K3S Tx

Working to get WSJT 1.7 alpha running with my K3S. I saw some other posts but found no solution. I can Rx just fine, just cannot Tx. Pressing TUNE on the K3S gives Red TX LED and obvious Tx evidence from display with ATU TUNE enabled. Settings:Radio are Rig Elecraft K3/KX3, COM 7 (correct for my

Re: [Elecraft] K3 and Power Poles

On the topic of Power Pole connectors, I have a crimper that if I remember correctly I bought from West Mountain Radio. It looks pretty similar to the one sold by Powerwerx. I have had very little success crimping the #10 zip cord sold by Powerwerx. Am I missing something? I have used these

Re: [Elecraft] Remote AC power switch?

I bought a pile of these at $20 US each. http://www.digital-loggers.com/iot.html I drive them with PI's or just about anything. It takes any logic from +3V to 120Vac to control them. I found that all the other options are great, but very very expensive for what they are. Mike va3mw On Tue,

Re: [Elecraft] Remote AC power switch?

On Tue, Sep 13, 2016 at 8:04 AM, Jim Miller wrote: > For those of you implementing remote operation: what are you using for an > IP accessed power switch? I need one port to control station A/C power and > another to toggle the K3s power control line on the ACC connector. I

Re: [Elecraft] [OT] Jump starter system for K3 portable power?

I bought one of these: http://www.harborfreight.com/5-in-1-portable-power-pack-with-jump-start-62747.html Seems to be more than enough to fill up tires, drive AC power tools and feed some 12 volt equipment

Re: [Elecraft] [OT] Jump starter system for K3 portable power?

Rick, I don't know if you will find something that meets all your requirements. Perhaps you will need to modify something that has the hardware you want. In my limited exposure to jump starters, I have found that the data is sometimes vague. I have had the same brand be both good, and sorry.

Re: [Elecraft] Remote AC power switch?

Jim: The problem with Teamviewer is that if the PC at the ham station hangs up, you’ve lost control. I suggest taking a look at using the West Mountain Radio R4005i which provides five ports for powering equipment (each with its own ’soft fuse’) and is TCP/IP accessible through a web browser.

Re: [Elecraft] K3 and Power Poles

‎Everyone has their ways.  Here is my two cents. Everything 12V in my shack including lighting is APP NEVER SOLDER. To many possible issues including that the solder flows so well on those pins its almost impossible to keep it off the contact surface. Also the wire break off easier  Second.

[Elecraft] Remote AC power switch?

For those of you implementing remote operation: what are you using for an IP accessed power switch? I need one port to control station A/C power and another to toggle the K3s power control line on the ACC connector. Since I plan on using Teamviewer to control this I could also use a USB

Re: [Elecraft] K3 and Power Poles

I was able to remove both power pole connectors from the power supply cable. Added more tension to the “tongue”, lifted the spring a little bit and the connectors “clicked” as before. They are a bit more secure now, not as strong as a solid power connector like the old Kenwood or Icoms ( I say

Re: [Elecraft] K3 and Power Poles

On Tue, 2016-09-13 at 09:29 -0400, Detrick Merz wrote: > For reference, I tend to crimp my PP connectors (although I've > soldered a few, too), and I never bother with roll pins, super glue, > or anything other than the natural friction to hold the black/red > housings in a pair. As a totally off

Re: [Elecraft] KX3 Vehicle mount

My KX3 mount in a 2008 Tacoma 7th District QSO Party 2016 with KX3 The Amp is on the hump in the back Access cab portion. | | | | || | | | | | 7th District QSO Party 2016 with KX3 19 new photos added to shared album | | | | From: Edward R Cole

Re: [Elecraft] K3 and Power Poles

I have assembled power poles incorrectly and noticed that they didn't "stick". However, when I assemble them correctly, they stick great and like Ken and Detrick said, I can drag my K3S around by the power cord. You have to be really careful to assemble them with the correct orientation of

Re: [Elecraft] K3 and Power Poles

Don: Thanks. I will inspect the connector carefully and if necessary I will replace it. Thanks to all for the good advice. Ramon > On Sep 13, 2016, at 09:41, Don Wilhelm wrote: > > One of the reasons some have trouble with APP connectors is that they have > not been

Re: [Elecraft] K3 and Power Poles

One of the reasons some have trouble with APP connectors is that they have not been properly assembled. If you look at the end of an APP and can see the spring finger as well as the contact blade, it has not been properly assembled. Give the contact blade a push from the wire side until the

Re: [Elecraft] K3 and Power Poles

Ken: Maybe there is. When my K3 arrived more than 5 years ago, it was my first experience with Power Poles. I actually soldered the connections inside, yet it is so easy to pull them and separate them from the radio that scares me always thinking that the connection is not solid. Tell me, how

Re: [Elecraft] K3 and Power Poles

I have the same experience as Ken (dragging gear around by the power cords), but I know of others who seem to have trouble getting PP connectors to stay stuck. It would be interesting to find out why they seem so solid for some people, and so unreliable for others. For reference, I tend to crimp

Re: [Elecraft] K3 and Power Poles

Perhaps something is wrong in the assembly of your Power Poles? Mine are secure enough to pull the K3 across the desk using the power cable and have never been an issue. 73 Ken - K0PP __ Elecraft mailing list Home:

Re: [Elecraft] Independent headphone and speaker volume

All: I understand the potential RFI issues and in fact have had to try different grounding schemes and #31 ferrites to eliminate the issue with my powered speaker. Call it a personal preference but when another person is in the shack and I want to use headphones, it is nice to have individual

Re: [Elecraft] K3 and Power Poles

I find the Power pole connectors perfectly serviceable... And I am pretty much a cabling/connector freak. I like Power Poles because they are serviceable, configurable, and becoming more common/standard as time passes. Would I prefer a CPC or other connector? Perhaps, but the Power Pole does

[Elecraft] K3 and Power Poles

The Power Pole connectors on the back of my K3 provide for only a marginal, non-secure connection to the cable coming from the power supply. Has anybody out there “invented” or “discovered” a more secure and strong connection than the one provided by the Power Poles? It is so easy for the

Re: [Elecraft] KX3 Vehicle mount

Ed, Yes, eliminate the fuse in the negative wire and ground it to the chassis near the point where the battery negative is grounded. Consider that the radio will also be grounded by the connection of the coax shield to the chassis. If the negative power lead is fused and that fuse opens,

Re: [Elecraft] Trump's a bigot - Hillary's a crook!!

Hi Russ, I am not sure what problem you perceive in the failure of the SP3 to amplify it's signal allowing you to individually change it's volume setting. As some say, "this is a feature - not a bug" as it prevents possible RFI interference from a nearby transmitted signal. Volume on the K3 is

Re: [Elecraft] Soon to be an Elecraft(er)!

I initially bought a K3/10 (10w version) in 2010, which I really like and is the prime radio used for eme with transverters. But I originally had both a FT-847 (very good for VHF & UHF, but lousy on HF) and a FT-817 (bought primarily to use portable on 144 with my mw equipment but also got

Re: [Elecraft] KX3 Vehicle mount

Very timely discussion as I am installing my KX3 into a 2015 truck. I already installed a new Alinco DR-735T. Temporarily using a dc accessory plug for power and not running low RF output as the dc plug wiring is not large enough for the current required for 50w (dc outlet is clearly