Re: [Elecraft] [OT] K2 Navigator Interface

. That is probably the expensive route to go, but it still didn't cost the 48 bucks that US Interface wants for a made up cable. Since I was using the Heil microphone adapter cable, I would have had to modify their cable anyway. Stan Rife W5EWA David Wilburn [EMAIL PROTECTED] wrote: Has

Re: [Elecraft] [OT] K2 Navigator Interface

Yes David, I just bought that interface and have it working with the K2. Stan Rife W5EWA David Wilburn [EMAIL PROTECTED] wrote: Has anyone used the USInterface.com, Navigator, with the K2? - David Wilburn [EMAIL PROTECTED] K4DGW K2 S/N 5982 On Wed, 2007-11-07 at 14:03 +0100

RE: [Elecraft] KPA100 DC connector WARNING ALERT

also be this way on every connection you make. I think the confusion stems from the fact that you have to flip one set of connectors (red/black) 180 degrees to have it plug in to another set. Did I make any sense here? Hi Hi. Stan Rife WD5EWA Houston, TX K2 S/N 4216 -Original Message

RE: [Elecraft] Re: K2 #4130 on the air on SSB

That reminds me...I worked SP7AID and OK1CF last night on 20m phone with 15 watts in to a Butternut HF5V vertical. Talk about MOJO. It took a few calls to nail SP7AID because there was quite a pileup. OK1CF came back to me on the second call. Stan Rife WD5EWA Houston, TX K2 S/N 4216

[Elecraft] Call sign change

confusion, and would also like for the Elecraft records to be updated for K2 S/N 04216. 72 and thanks, PS I hope the 5th class ECN NCS will make the change accordingly as well. Hi Hi Stan Rife W5EWA (formerly WD5EWA) Houston, TX [EMAIL PROTECTED

RE: [Elecraft] Your favorite bands

Hey, how 'bout James Taylor, one of my all time favorites. Chicago, The Eagles, Creedance Clearwater Revival. Oh, and don't forget Arlo Guthry (Alice's Restaurant). 40 and 20 for me. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list

RE: [Elecraft] A few photos... again... OT Power connector.

of the connectors). Your picture shows red on the left, if you were looking at them from the back of the connector. Stan Rife W5EWA Houston, TX K2 S/N 4216 Le 04-08-13, à 12:13, Fernando Quinones a écrit : Hello.. Great pictures and T-Shirt. I notice on one of the pictures for the 897 power pack

[Elecraft] MD2 Mic

. Thanks, Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo

RE: [Elecraft] Atomic Clocks and Aluminum Siding

To bad they don't make one that you can interface your existing GPS receiver to. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: Dan Allen Sent: Sunday, January 09, 2005 10:29 AM Subject: Re: [Elecraft] Atomic Clocks and Aluminum Siding I was wanting a Nixie

RE: [Elecraft] Atomic Clocks and Aluminum Siding

the rotators automatically and it's really neat to sit back and watch it work. Seeing the sat signal near a constant S-meter reading at all times while the satellite is in view is nice when you are busy on the keyboard transferring files or mail. Stan Rife W5EWA Houston, TX K2 S/N 4216

RE: [Elecraft] Atomic Clocks and Aluminum Siding

NO G Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron D'Eau Claire Sent: Sunday, January 09, 2005 4:23 PM To: elecraft@mailman.qth.net Subject: RE: [Elecraft] Atomic Clocks and Aluminum Siding Yep

RE: [Elecraft] KPA100 - 80m poor quality SSB

You must have looked at a different errata sheet than I have. Item 3 talks about RFC3 and the resistor across it. The sheet is dated 12/14/2004 Stan Rife W5EWA Houston, TX K2 S/N 4216 Thanks for the information Sverre. Unfortunately:- a) The Errata is under the manual section

RE: [Elecraft] Elecraft Shirts from Sew Devine

to his address about your plight. Hope this helps. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Michael Babineau Sent: Thursday, January 20, 2005 6:54 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Elecraft

RE: [Elecraft] K1 missing parts - is this to be expected?

can't find either of the 100pf caps C41 C95. I sent an email off to parts. I hope I am not wrong again. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of W3FPR - Don Wilhelm Sent: Thursday, January 20, 2005 8:20 PM

RE: [Elecraft] K1 missing parts - is this to be expected?

Ooops. Never mind Parts, WA7BOC pointed out the error of my ways. I found them. See, the old wise man was right! Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: Roger Stein [mailto:[EMAIL PROTECTED] Sent: Friday, January 21, 2005 11:06 AM To: 'Stan

RE: [Elecraft] K1 missing parts - is this to be expected?

Funny, when I inventoried mine all the parts were there and the count was perfect the first time through, except for one cap I thought was missing. Didn't have to do it again because when assembly was complete there were no left over parts. Stan Rife W5EWA Houston, TX K2 S/N 4216

[Elecraft] KPA100 anomally

readings are right where they are supposed to be. Any ideas?? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub

RE: [Elecraft] Bad KPA100 PCB?

sense that it would be thicker though, since the KPA100 board has to deal with a lot more heat than the K2 RF board. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of W3FPR - Don Wilhelm Sent: Friday, January 28, 2005 8

RE: [Elecraft] Re: Which Mods are applicable?

it apart and do it later. What do ya'll think? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Bob Evans Sent: Friday, January 28, 2005 12:33 PM To: elecraft@mailman.qth.net Subject: [Elecraft] Re: Which Mods

RE: [Elecraft] RE: K2 case screw alteration

Personally, I like the exposed screw heads because it gives it a bit of a mechanical/military look, and as below, a kind of retro look. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Steven Pituch Sent

RE: [Elecraft] Waterproofing cable fittings

But be sure and use the black ty-wraps. They will last a lot longer. The white ones don't stand up to the UV. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jeremiah McCarthy Sent: Wednesday, February 16

[Elecraft] S-9 calibration with XG1

for 50 microvolts lights the bar under the 9 on my S-meter. Stan Rife Houston, TX [EMAIL PROTECTED] ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc

RE: [Elecraft] K2 upgrade mods tactical planning

H, I resemble that remark. It was a long, long time ago though, Maggie. Can a guy be forgiven for that kind of stuff? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Margaret Leber Sent: Wednesday

[Elecraft] KDSP2 parts missing

and the K60XV together and they both came in one box. The circuit board for the K60XV is in it's bag. In the KDSP2 bag I got a lot of small parts, but I do not see a circuit board. I have even looked in between all the pages of the assembly manual and have not discovered it yet. Any hints? Stan Rife

RE: [Elecraft] RS solder station and ESD Equipment

I wonder who makes that station for them. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Daniel Reynolds Sent: Thursday, March 03, 2005 11:13 PM To: George Cortez; elecraft@mailman.qth.net Subject: Re

RE: [Elecraft] K2 S/N 4787 Build In Progress

I realized what I had done. The plus side is that I had a couple of caps for my junk box. Hi Hi Stan Rife W5EWA Houston, TX K2 S/N 4216 Jim, AB0UK, wrote: I'm inventorying each board as it is begun. ... At this point capacitors for the RF board are a wild blur. I'm sure I have not correctly

RE: [Elecraft] k2 and sb-200

specifically for, and wires in to, the circuitry of the SB-200. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dwight Sent: Tuesday, March 08, 2005 9:17 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] k2

RE: [Elecraft] a K2 thought?

. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig Rairdin Sent: Monday, March 21, 2005 11:40 AM To: elecraft@mailman.qth.net Subject: RE: [Elecraft] a K2 thought? Robert Conley wrote: In reviewing the K2

RE: [Elecraft] K2 Mods for KPA100

) down. I guess you can tell, and I have to admit, that I have not studied the custom tailoring instructions yet. The denoiser works great for CW...man does it work great! If I turn down the SSB denoiser does that affect the CW denoiser? Thanks, Stan Rife W5EWA Houston, TX K2 S/N 4216

RE: [Elecraft] K2 RF board - components on bottom?

Jim, HMC Electronics carries these. I ordered two of them, one for 1/8 watt and one for 1/4 watt, a few weeks back. They are just as you described. 2 or 3 bucks apiece. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- On Behalf Of Jim Harris Sent: Sunday, March 27

RE: [Elecraft] OT: Palstar QST review

to download and graph the SWR curve of your antenna, as well as the resistance and reactance curves. It is a really neat platform and they are developing more software for it. You should consider this kit. It winds up being about the same price as the MFJ unit. Stan Rife W5EWA Houston, TX K2 S/N 4216

RE: [Elecraft] More K2 Mojo.

Is this a spot?? G Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Larry Phipps Sent: Friday, April 15, 2005 6:08 PM Cc: elecraft@mailman.qth.net Subject: [Elecraft] More K2 Mojo. Just worked a special

RE: [Elecraft] When and where can we see pictures of new amp?

Well, if that is going to be the price, then they can count me out. I'll stick with my SB-200. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Toby Deinhardt Sent: Monday, April 25, 2005 11:16 AM

RE: [Elecraft] KPA800 @ $2.8k: count me in/out

That's just about the ceiling I had in mind as well. And I would think that, for a kit, it should be considerably less. For the legal limit???maybe a little more, but not much more. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto

RE: [Elecraft] KPA800 @ $2.8k: count me in/out

My idea of spendy IS 1500 bucks. 10,500 bucks for a radio is pure H S... I think the whole amateur market is getting out of hand. But that is just my opinion. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED

RE: [Elecraft] KPA800 @ $2.8k: count my $

, and then had to spend some time inside it to get it working. Anything I buy over a thousand bucks or so, I have to finance. I hope Elecraft doesn't price themselves out of most of our pocketbooks. It's hell to be poor, but hey, somebody's got to do it. Stan Rife W5EWA Houston, TX K2 S/N

RE: [Elecraft] Swing Arm Magnifiers -OT

Luxo is probably one of the better ones. As I remember, prices are around a hundred bucks for a decent one. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Tom Skinner Sent: Wednesday, May 04, 2005 3:50

RE: [Elecraft] (no subject)

Their prices are too high Paul. I bought mine last year for 35 bucks. I think someone else said they found them for around 30. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Paul Gates Sent: Thursday

RE: [Elecraft] Swing Arms Redux

I'd try the Optivisor first Tom. Then if you feel you need the swing arm magnifier, you haven't invested a whole lot and, you will still like using the Optivisor. They really are pretty comfortable, at least for me. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message

[Elecraft] Optivisor

-OptiVisor.htm Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

RE: [Elecraft] kpa800 question

That was going to be my question...if it is controllable from the K2 like the KPA100 is. Sort of like the transverters, designed for the K2, but can be used with other rigs. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL

RE: [Elecraft] Power Supply (WAS: New amp)

the same output voltage. Would either of the above present any problems? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Ron D'Eau Claire Sent: Thursday, August 18, 2005 12:51 PM To: 'David'; elecraft

RE: [Elecraft] long-haired, dope-smoking, free-software hippie

...loosen the tie and top button. My 2 cents Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Mike Sexsmith Sent: Wednesday, August 24, 2005 9:25 AM To: elecraft@mailman.qth.net Subject: [Elecraft] long-haired, dope

RE: [Elecraft] OT Free Registration code for Opera

Just went there Tom, and the give away is over. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Thom R LaCosta Sent: Wednesday, August 31, 2005 5:56 PM To: elecraft@mailman.qth.net Subject: [Elecraft] OT

[Elecraft] K3 issue with Monitor VOX

I don't know if these are related or not, but #1 when using the monitor function I hear my own voice ON frequency, but I also hear an OFF frequency copy of my signal...like it's about 1 or 2 khz away. I have tried it with and without phones and with two different microphones (MD2 Elecraft Pro

[Elecraft] K3 Front panel rattling washer

I also have the rattling washer on the headphone jack. I have been working with tech support taking measurements and checking different things. No joy so far. Everything checks out as far as the assembly goes. I just seem to have about .050 more clearance between the shoulder of the headphone

Re: [Elecraft] Re: losing FL5

Sorry Wayne, I meant to send this to the list. Has the method 3 been implemented for frequency calibration yet? Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 wayne burdick wrote: Hi Eric, This should not have happened. You may need to re-set the filter's center frequency using

Re: [Elecraft] K3 FIRMWARE UPDATE: MCU 1.87, DSP 1.69 (Finally!)

This is great. With what other brand can you beat up on the developers, and see the developers humbled by their own mistakes. We understand Lyle. And I thought that was the sunset. Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 Lyle Johnson wrote: ...listening to the K3 on 29.600

Re: [Elecraft] Knob shaft and pot issues

The gritty-ness is not a problem...you are actually feeling the detents in the encoder. These are encoders and not pots. I had never noticed the slight side to side movement of the shafts. Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 G4ILO wrote: Bob K9PAG wrote: My kit K3

Re: [Elecraft] VOX sensitivity problem with new firmware

YES, I had not tried it since the update yesterday, but I find it very hard to trip the VOX now with Anti-Vox at zero and the Vox gain set WAY high, and it does not want to stay in. What happened to the Vox Wayne and gang? Stan Rife W5EWA Houston, TX K2 SN 4216 K3 SN 0690 KM0O wrote

Re: [Elecraft] VOX sensitivity problem with new firmware

Thanks Lyle. A previous setting of 8 to 10 now takes a setting of 60 to get reasonable operation...and that is without any Anti Vox. Stan Rife W5EWA Houston, TX Lyle Johnson wrote: What happened to the Vox Wayne and gang? The balance between MIC GAIN needed for good Tx operation

[Elecraft] Pitch adjustment

The frequency steps for PITCH adjustment appear to be 50hz. Is this the only step selection for the PITCH adjustment? Stan Rife W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

[Elecraft] K3 - Pitch adjustment

The frequency steps for PITCH adjustment appear to be 50hz. Is this the only step selection for the PITCH adjustment? Stan Rife W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

[Elecraft] New Firmware

I just checked the website for the new software and the K3 Utility did not see it. I'm still showing 01.88, 00.01 and 01.71 available. Did they take it down for some reason? Stan W5EWA Houston, TX K2 SN 4216 K3 SN 0690 ___ Elecraft mailing list

Re: [Elecraft] New Firmware

I had forgotten that Wayne was putting this in a different folder. I got it downloaded, loaded and all is well. Thanks all for the help. Stan W5EWA Houston, TX K2 SN 4216 K3 SN 0690 [EMAIL PROTECTED] wrote: Go to ftp://ftp.elecraft.com/K3/firmware You'll need to do some reading to

[Elecraft] WHERE ARE THE KPAs

Eric/Wayne, can you give us a tidbit to tide us over on this subject. I know you guys are busy with the K3, but we would at least like to know that the KPAs are forthcoming. How about an update. Stan W5EWA Houston, TX ___ Elecraft mailing

Re: [Elecraft] K3 - v2.02

Could this be a menu item so we can enable/disable? It seems a bit confusing because of the display. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Tom Childers, N5GE wrote: On Sat, 14 Jun 2008 10:14:24 -0400, Mike Harris [EMAIL PROTECTED] wrote: Good day, I upgraded my

[Elecraft] Autoinfo 1

I set Autoinfo to Auto1 and it did not seem to cause the K3 to send out RS-232 data without being polled. My impression is that this is what this option was supposed to do. I may be out in left field on this, and if so someone bring me in out of the rain please. :-) I am trying to get

[Elecraft] KRX3 receiver

Hi Eric. Are the KRX3s going to start shipping this week as hoped? -- Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

[Elecraft] No package yet

Richard, I still haven't received that board. Thanks, Stan Rife W5EWA Houston, TX __ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft

Re: [Elecraft] K3 KDVR manual

When will the KDVR3 be released? Do we have a date yet?   Stan W5EWA --- On Wed, 12/3/08, Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] wrote: From: Eric Swartz - WA6HHQ, Elecraft [EMAIL PROTECTED] Subject: Re: [Elecraft] K3 KDVR manual To: [EMAIL PROTECTED] Cc: elecraft@mailman.qth.net

Re: [Elecraft] Split while using Diversity

I've been trying to decide whether or not to ask this question, because I didn't want to appear too dumb. What exactly is the advantage of diversity receive? Is it for weak signal work specifically? Can someone give me a quick run down on  this? I've never had a rig that would do this before,

Re: [Elecraft] Amplifiers

C'mon --- On Mon, 12/22/08, Ralph Parker ve...@dccnet.com wrote: From: Ralph Parker ve...@dccnet.com Subject: [Elecraft] Amplifiers To: Elecraft@mailman.qth.net Date: Monday, December 22, 2008, 2:43 PM I just can't get my head around Ameritron (Mighty Fine Junk) by any other name as builders

Re: [Elecraft] KPA Amplifiers

C'mon Eric, tell us that behind the scenes you guys have secretly been working on the KPAs and you have 5000 of them ready to go out the door. Can I place my order now?   Stan W5EWA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must

Re: [Elecraft] K3 Firmware 2.19

Also with my K3 there is a significant reduction in the audio level when NR is on. I don't see how the AGC would affect the NR. It's just a function of the filtering that reduces the volume when the NR is activated. Or is there something I am missing. Stan W5EWA Houston, TX K2/100 SN 4216

Re: [Elecraft] K#: 2.20 / 1.88

Is there an audio gain function for the NR? My audio is substantially reduced when the NR is engaged. More so if I have an aggressive setting for the NR? Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 David and Dianne on Comcast wrote: Running my SLP at 7 and THR at 6. I may

Re: [Elecraft] K3 Firmware 2.19

: Stan Rife [EMAIL PROTECTED] To: Elecraft Elecraft@mailman.qth.net Sent: Thursday, July 24, 2008 6:45 PM Subject: Re: [Elecraft] K3 Firmware 2.19 |Also with my K3 there is a significant reduction in the audio level | when NR is on. I don't see how the AGC would affect the NR. It's just

Re: [Elecraft] K3 Firmware 2.19

is not workingwho knows. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Stan Rife wrote: Hi Mike. I have 2.20 loaded and my comments below are what I am experiencing. I don't see how it's possible to have the same level of audio with the NR engaged. The filtering will naturally reduce

Re: [Elecraft] K3 V2.20/1..88

Wow, I really must have something set differently than everyone else. Or maybe the absence of any noise this evening is making the difference. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN 0690 Lee Buller wrote: Just loaded my first beta. I've been a chicken for several weeks waiting

Re: [Elecraft] K#: 2.20 / 1.88

[EMAIL PROTECTED] To: Stan Rife [EMAIL PROTECTED] Cc: Elecraft Elecraft@mailman.qth.net Sent: Thursday, July 24, 2008 10:49 PM Subject: Re: [Elecraft] K#: 2.20 / 1.88 Hate to ask the stupid question but do you have a signal in the passband when you activate it? If so are you using it on a CW or SSB

Re: [Elecraft] K3 V2.20/1..88

to getting to play with some of that soon. On Thu, 2008-07-24 at 21:52 -0500, Stan Rife wrote: Wow, I really must have something set differently than everyone else. Or maybe the absence of any noise this evening is making the difference. Stan W5EWA Houston, TX K2/100 SN 4216 K3/100 SN

RE: [Elecraft] OT - Hakko soldering station recommendion

I have the FP-102 and it has been a great station. I also have an 808 that is indespensible for desoldering. Very happy with the Hakko stuff.   Stan W5EWA   --- On Fri, 10/10/08, Ron D'Eau Claire [EMAIL PROTECTED] wrote: From: Ron D'Eau Claire [EMAIL PROTECTED] Subject: RE: [Elecraft] OT -

Re: [Elecraft] 6m preamp news?

Hi Eric,   I haven't monitored for a while. Is this something that is external to the K3? Is it a mast mount pre-amp with switching capabilities??  Please clue me in or point me to some info.   Thanks,   Stan W5EWA --- On Fri, 10/10/08, Eric Swartz WA6HHQ - Elecraft [EMAIL PROTECTED] wrote:

RE: [Elecraft] K3 - Can't ship them out the door?

Hey that just moved me up the list by one. Thanks Ed. See ya. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Edward R. Breneiser Sent: Friday, December 07, 2007 1:41 PM To: elecraft@mailman.qth.net

RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)

Yeah, Chris, it's bitching...when you do it day after day after week after week. That's all we hear on the list any more is you and people like you complaining about not having your K3 when you think you should have it. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message

RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)

Not me Greg. I'm finally getting involved in this discussion and I am going to hang around and make life miserable for these miserable little boys who can't have their toys. At least until Eric un-subscribes me. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message

RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)

It's just been confirmed. G4ILO was hired by Yaesu and Icom to create bad publicity for Elecraft. The big 3 just can't fade the heat. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julian G4ILO Sent

RE: [Elecraft] K3 - Can't ship them out the door?

and really, not much of a wait after all, especially when I consider the end result. Chill out! Nobody is trying to screw you out of anything. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Joe Subich

RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)

intentionally intend to deceive someone. Do you people think Elecraft intended to deceive you? You people are howling like a bunch of 3rd graders that can't have their toy when they want it. You people must have been hired by Yaesu to try and create some bad publicity for Elecraft. Stan

RE: [Elecraft] RE: not about technical issues (was Shipping StatusPage)

Arrogant, whining twits...that just hit the nail squarely on the head. Good rid dents Julian. Maybe we can get some peace and quiet on the list now. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Julian

RE: [Elecraft] Shipping Status Page

No Jim, it used to be a unique reflector. Now it's just a sounding board for cry babies that can't have their toys when they want them. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Jim Sent: Friday

RE: [Elecraft] [K3] Invoice confirmation - YES!

Good for you David. Good luck!! Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of David Ferrington, M0XDF Sent: Sunday, December 09, 2007 7:24 AM To: 'Elecraft Reflector' Subject: [Elecraft] [K3] Invoice

RE: [Elecraft] KNB2 diagnosis

I'll admit that I am pretty gullible, until I prove otherwise, but scratching the top of a transistor as a fix Ha ha ha hac'mon now. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of [EMAIL

[Elecraft] Test Post

I unsubscribed and re-subscribed to see if it would fix my posting problem. Test. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info

RE: [Elecraft] Re: K3 NB indicator flasjing

I thought these kinds of questions were supposed to be posted to the K3 support email list. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Eric Swartz - WA6HHQ, Elecraft Sent: Thursday, January 03, 2008

[Elecraft] K3 question

Can someone tell me what the cabinet color of the K3 is? I at first thought it was a brown color, then I thought I saw someone remark that is had been changed to black. Now I see remarks about using a black magic marker to hide the chipped paint. Is it black or brown? Stan Rife W5EWA

[Elecraft] K3 cabinet color

Maybe my posts aren't making it to the list. I asked a question yesterday (maybe it was this morning) about the color of the K3 cabinet and no one has bothered to answer this. SOO what color is the K3...brown, black or otherwise??? Stan Rife W5EWA Houston, TX K2 S/N 4216

[Elecraft] Test post

Test post from yahoo home page to see if my post will get through to the list. Stan Rife W5EWA ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub

RE: [Elecraft] K3 update problem

I have a question about the drivers and the update software. Are they Vista compatible? Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list

[Elecraft] K2 headset jack

. It seems the life span on them is only a couple of years or so, at least for those of us that have the problem. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post

RE: Re: [Elecraft] K3/100 Kit #307 Lift Off

How about some Dzus (sp?) type twist lock fasteners? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Brett Howard Sent: Tuesday, January 29, 2008 4:52 PM To: [EMAIL PROTECTED]; 'David Pratt'; 'Elecraft

[Elecraft] KRX3 option question

This from the K3 manual: The sub receiver also has the same filter options as the main receiver. Up to five crystal filters can be installed in the sub receiver, as well as a generalcoverage L-C band-pass filter module (KBPF3, pg. 42). The sub also includes an I.F. noise blanker.

Re: [Elecraft] Question for Optivisor users

I think mine came with a #2 lens Mike. Focal distance is around 8 and still gives good magnification. I find it very comfortable as far as the distance and power. I thought I might try one that would get me a little farther away, but I am happy with the present lense so it hasn't been something

RE: [Elecraft] KUSB - Vista Issues

. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber Info (Addr. Change, sub, unsub etc.): http://mailman.qth.net/mailman/listinfo/elecraft

RE: [Elecraft] KUSB - Vista Issues

Will do. Thanks for the good news Dale. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dale Wiese Sent: Friday, March 07, 2008 10:09 PM To: elecraft@mailman.qth.net Subject: Re: [Elecraft] KUSB - Vista

RE: [Elecraft] KRX3 status update ???

I'm wondering too David. My K3 will probably ship in April (I hope) and I am hoping that the KRX3 comes with it. Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Dave G. Sent: Monday, March 10, 2008 2:02

RE: [Elecraft] KatieGram (K3)

H, a K2 kit huh? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of Craig D. Smith Sent: Monday, March 10, 2008 9:09 PM To: Elecraft@mailman.qth.net Subject: [Elecraft] KatieGram (K3) Got the Katie

[Elecraft] KRX3 UPDATE

Just a gentle reminder Wayne...it's 3/11 and I don't see the update for the KRX3. Stan Rife W5EWA Houston, TX K2 S/N 4216 ___ Elecraft mailing list Post to: Elecraft@mailman.qth.net You must be a subscriber to post to the list. Subscriber

RE: [Elecraft] The Elecraft MH2 Hand Mic is Back!

Is there a performance difference? If so, can I trade my old one in on the new one? Stan Rife W5EWA Houston, TX K2 S/N 4216 -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] On Behalf Of wayne burdick Sent: Wednesday, June 20, 2007 3:22 PM To: Elecraft

Re: [Elecraft] KAT100

Eric, I'm glad I saw this KAT100 thread. I wanted to ask if the KAT100 will tune ok on 6m. I looked through the specs and the rest of the manual and could only find reference to 160 through 10. The specs did not include a frequency coverage range. Stan Rife W5EWA Eric Swartz

  1   2   >