but I searched and could not find it.
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Ele
Thanks Joe! From those BWs I assume both are 5-poles.
BTW has anyone ever compared the old 5-pole 200 to the newer 6-pole?
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http
Does anyone exactly what BW the filters are in the K4HD?
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post:
ab2tc wrote
> PS. I am guessing if they have any Elecraft equipment we would have heard
> about it here.
I don't know but Dom 3Z9DX bought a K3 from me in May 2017. I had upgraded
to an 86XX S/N and sold him my 47XX S/N.
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2
ion introduces constantly shifting relative phase changes).
73, Bill W4ZV
P.S. The bottom 2 plots in the link below show what can be done by phasing
two parallel staggered Beverages:
http://users.vnet.net/btippett/new_page_10.htm
-
SN 3000 with the A to B kit, then you have the
> same sidetone wave shaping as the newer K2s.
>
> I am not familiar with the TF3MA LP audio cutoff nor the JG1XLZ KSB2
> audio quality mod, and cannot comment.
>
> 73,
> Don W3FPR
>
> On 1/6/2019 8:20 AM, Bill W4ZV wrot
audio quality mod. (not needed for CW).
I don't have time to find links for these but you should be able to find
them in a keyword search. They are all free and simple to install once you
have the parts.
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
___
of money for many of us, but a bargain compared to
buying a brand new K3S, and you're getting about 95% of the performance.
BTW I have no connection with either of the sellers above.
73 & GL,
Bill W4ZV
--
Sent fro
especially true on 160 where local signals are extremely strong (as in K0RF
being line-of-sight about 2 miles away).
Thanks for posting those results!
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
AE5X: Anyone know if the upcoming (later this month?) Bouvet team is using
Elecraft gear?
I don't know but Dom 3Z9DX bought a K3 from me in May 2017. I had upgraded
to an 86XX S/N and sold him my 44XX S/N.
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabbl
Hi Petr,
Have you tried Save and then Restore Config in the K3 Utility? I know this
is somewhat inconvenient but it might work (don't know if it will but worth
a try).
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabbl
RX).
Most of these relays are slow (and cheap) open frame relays.
With a little practice, I can listen between words (not characters) using a
footswitch.
And I have NEVER burned up any TX relays in my amps.
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.
SNR, I toggle out of diversity (SUB button on the K3).
I know this is not the question you asked but just FWIW.
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman.qth.net
ess my 30 years in Colorado made me doubly smart, since I had to work
through BOTH coasts. :-)) And I never once complained about either.
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home
ing
weak DX on 160 that I hear with my ears (like VU2BGS last night who runs
140W to a 10 meter high vertical!).
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: http://mailman
our TX there. Here's a macro I wrote in 2011 with details:
http://elecraft.365791.n2.nabble.com/K3-Pileup-Buster-Macro-td6579405.html
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
al hundred QSOs with North America even in summer QRN (June/July)."
Stay away from it until you can get decent ladder line!
73, Bill W4ZV
--
Sent from: http://elecraft.365791.n2.nabble.com/
__
Elecraft mailing list
Home: ht
rices are in the $1500 making this a
viable alternative IMHO.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Confused-about-K3-to-K3S-Migration-service-tp7626459p7632800.html
Sent from the Elecraft mailing list archive at Nabbl
bsite has excellent knowledge that anyone using them
should be aware of. Not to say there aren't some Darwin Award candidates
using them. ;-) I've never had any problems but I follow charging, care
and storage recommendations religiously.
http://www.rchelisite.com/lipo_battery_ch
e-Storage-bag-9-x11-8-/321816396647?hash=item4aedc08367:g:2UsAAOSwPhdVA5Jj
I always charge outside our house with the bag sitting on concrete or a
paving stone. I also carefully inspect my LiPOs for swelling which
indicates problems. Better safe than sorry!
73, Bill W4ZV
--
View this messag
Thanks Don! Indeed that was the problem and happily I didn't need to remove
the front panel.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Main-Encoder-tp7630319p7630329.html
Sent from the Elecraft mailing list archive at Nabbl
adjust the drag with the knob in and then
pull it out if I want it to spin fast freely. (GRIN)
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Main-Encoder-tp7630319.html
Sent from the Elecraft mailing list archive at
nk explaining:
https://en.wikipedia.org/wiki/Near_vertical_incidence_skywave
However this would require General Class licenses or higher for voice modes.
73 and Good Luck!
Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-P3-and-KAT500-tp7629969p7630119.html
Sent from th
A filter has been located so no need for further replies.
Thanks all!
Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-KFL3A-500-500-Hz-5-pole-filter-tp7629897p7629907.html
Sent from the Elecraft mailing list archive at Nabble.com
If anyone has one for sale, please reply direct with price including shipping
and any details.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-KFL3A-500-500-Hz-5-pole-filter-tp7629897.html
Sent from the Elecraft mailing list archive at Nabble.com
of K3S, also made on 10 meters. * IFSS
= Interference free signal strength.
ah NOTE: Testing of 2nd sample made on 10 meters while investigating IFSS*
curves. Similar testing of 2nd sample of Flex Radio 6700, also made on 10
meters. * IFSS = Interference free signal strength.
73, Bill W4ZV
A friend has made me an offer I can't refuse. Thanks to all for the
responses.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-to-Buy-KXV3A-tp7628440p7628460.html
Sent from the Elecraft mailing list archive at Nabbl
Does anyone have an unused KXV3A after upgrading to KXV3B? Please email
direct to 93bmwm5 at gmail.com.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Wanted-to-Buy-KXV3A-tp7628440.html
Sent from the Elecraft mailing list archive at Nabble.com
s are becoming scarcer by the day.
Thank you Elecraft for producing one of the best quality CW signals and not
allowing owners to shorten rise/fall times to intentionally create dirty
signals.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-upgrade-to-K3
6 and above. Hopefully
your 3k S/N is above!
http://www.elecraft.com/K3/mods/dsp_rev_c_information.htm
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-upgrade-to-K3S-question-tp7627908p7627920.html
Sent from the Elecraft mailing list archive at
Running DC input voltage close to the specified limit of 15.0 V will improve
IMD. Perhaps the results you posted were with lower input voltage.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/High-Tx-IMD-with-new-K3s-10-tp7627317p7627318.html
Sent from
7;d definitely want one above ~3626 to get the new DSP.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Confused-about-K3-to-K3S-Migration-service-tp7626459p7626469.html
Sent from the Elecraft
erminals on multiple units for over 5 years with no
problems.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3s-80W-on-160-tp7624720p7624875.html
Sent from the Elecraft mailing list archive at Nabble.com.
___
sample
of noise.
###
The last phrase "helps your ears discriminate weak signals from noise by
providing a wider background sample of noise" is key. Narrower bandwidths
are not best for the human ear/brain...no matter what theory says about
narrower bandwidths having better S/N.
73, Bill W4ZV
I don't believe K3S schematics are available yet, but the K3 schematics are
probably close and may help.
http://www.elecraft.com/manual/K3_Schematics_Jun_2010.pdf
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/diagram-K3S-tp7623381p7623382.html
1. Is your PREamp turned on for 10m? Hopefully you don't accidentally have
RX ANT activated.
2. Please describe your antenna in more detail, including orientation.
3. I've never needed a preamp on 10m in the 8 years I've had a K3, but my
antenna system has a lot of gain.
t;full-bodied" sound) to the
weak signal by allowing it to be differentiated from noise by my ear/brain
while APF is engaged. The net result is a broad overall response but with a
very narrow ~10 dB peak in the center (from APF).
73, Bill W4ZV
--
View this message in context:
6 soundcard. I still prefer Skimmer's panadapter
because clicking the last "599" decoder dot will QSY your TX to the exact
frequency (within 10 Hz) once the system is calibrated...no need position a
cursor any closer than the decoder dot.
73 & GL!
Bill W4ZV
-
nce I
already have a KRX3 (necessary for diversity), I created a simple Macro to
program VFOA for TX and VFOB for RX (see my previously referenced link for
the Macro) allowing Skimmer to jump the TX frequency to Skimmer's 599
decoder dots.
73, Bill W4ZV
--
View this message in contex
callsign decoding)
which is legal for unassisted contest categories.
https://www.youtube.com/watch?v=uZDXuOgUQJ0
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/comparing-P3-LP-Pan-SDRPlay-others-tp7620757p7620819.html
S
how much) or
random tuning.
Here's a recent post about how to do this (note that a KRX3 is required)
including a link to the Skimmer page which showing the 599 function in a
very large pileup:
http://elecraft.365791.n2.nabble.com/Now-that-the-K-Pod-is-shipping-we-could-use-your-help-with-usefu
Tony Estep wrote
> On Fri, Jul 22, 2016 at 8:22 PM, Bill W4ZV <
> btippett@.mit
> > wrote:
>
> Yep, those were legendary days. I too made Novice DXCC, shortly after
> Bill.
> He was KN4RID in those days. I worked my 100th right after he got his, but
> I stuck m
nfo/solar/history/hist1957.html
I was very lucky to be QRV then and made the first Novice DXCC:
http://www.novice.bappy.com/about_21.html
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Solar-Cycle-tp7620505p7620582.html
Sent from the Elecraft mailing list a
"Secrets of the Sun" is free on youtube:
https://www.youtube.com/watch?v=ncphh8FWUUE
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Solar-Cycle-tp7620505p7620521.html
Sent from the Elecraft mailing list archive at
Clay Autery wrote
> NOW, TRANSMIT on SSB at 100W on the PA
Just curious how you get 100W out of the KX3? ;-)
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Upper-power-supply-voltage-limit-with-KX3-tp7619776p7619805.html
Sent from the Elecr
e button on KPOD.
3. Manually tune VFO A to the approximate center of the pileup and watch
for a "599" to appear.
4. Click the magenta "599" decoder dot to send VFO A to the last station
worked.
5. You can manually add some +/- XIT offset to VFO A if too many guys learn
t
>Damage due to using anything over 15 V would void the warranty, since that's
the specified maximum.
Add in series a couple of silicon diodes (~0.7V drop each) of sufficient
current rating in the positive lead. 16V - 1.4V = 14.6V.
73, Bill W4ZV
--
View this message in contex
a
reasonable alternative.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Why-buy-a-KX2-KX3-compared-to-a-KX1-MTR3B-in-a-QRP-portable-scenario-tp7619714p7619721.html
Sent from the Elecraft mailing li
s R82 (i.e. in parallel with the existing 10k). If you're not
accustomed to SMD, the 0603 type is not a good one to learn on because it's
so small. Elecraft supplies both resistors in the kit.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K
dering SMD, or Elecraft will
install the mod for you if you email k3support at elecraft.com or call
831-763-4211.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K-Pod-owner-s-manual-tp7619352p7619362.html
Sent from the Elecraft mailing list archive
falls off a cliff 24 hours later.
"3.2. Stations who begin setting up before 1800 UTC Saturday may work only
24 consecutive hours,
commencing when on-the-air operations begin."
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/FD-Propagation-tp761
erted to W7 ($75 upgrade) and then
W10 (free) and they are now great. I also had 2 Win 8 laptops that were
converted very easily to W10. Now everything is W10 using the same
classicshell interface.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/OT-Lookin
tone quality. The original design had so much harmonic content that it
was difficult to zero beat stations by ear.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/latest-K2-serial-tp7615395p7615492.html
Sent from the El
mod: http://www.raunvis.hi.is/~matti/TF3MA/sidetone_tf3ma.html
KT5X addendum:
http://mailman.qth.net/pipermail/elecraft/2006-November/061425.html
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/latest-K2-serial-tp7615395p7615446.html
Sent from the Elecraft mailing list
calibration constants and items unique to the K3. I doubt Elecraft has
thought of this but it would be nice if possible.
If I were you I'd go through the K3 CONFIG settings, write everything down
and then manually duplicate into the K3S. Also don't forget the MENU
settings.
73, Bill W4ZV
TX filter than 2.7/2.8 because the firmware/software will not allow
it (even for CW). I know because I tried to do that years ago in an attempt
to further cleanse my CW signal. Now the KSYN3A does a great job of that
anyway.
When I do another experiment with the 2.1, I'll report the res
ath may
help visualize what I'm doing:
signal >> 200 Hz XFIL >> 400 Hz DSP >> 30 Hz APF >> ear/brain
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/APF-audio-peaking-filter-on-the-K3-K3S-KX3-tp7613416p7613
here a workaround for
this or am I doing something wrong?
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-K3S-noise-blanker-performance-greatly-enhanced-at-my-QTH-need-testers-tp7613491p7613631.html
Sent from the Ele
"So very few controls would actually be needed. Come to think of it, an
operator wouldn't even be needed!"
BINGO! And how much fun would that be? Which is exactly why I don't care
for the computer-to-computer modes.
73, Bill W4ZV
--
View this message in context:
ht
If you operate SSB, you might want to run higher voltage at the K3 terminals
(e.g. at 14.5V which is below the 15.0V spec) to minimize IMD. This was
discussed extensively in 2009 but the following by W4TV is a good summary:
> Is there something critical in the rad
rger (available for around $20) to properly charge and store LiPOs. You
cannot beat the energy density (mAH per ounce) of a LiPO but they DO REQUIRE
proper care.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K
, so it weighs 86%
less and probably has sufficient life for most of my operations.
I'd be interested to hear any comments from others about any leakage
problems with internal batteries.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-LiFePO4-repl
Anyone know the details?
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Note-The-KFL3A-200-is-currently-unavailable-tp7607115.html
Sent from the Elecraft mailing list archive at Nabble.com
simple is my rule when operating above timberline in the summer!
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/Miniature-self-supporting-HF-antennas-tp7605064p7605079.html
Sent from the Elecraft mailing list archive at
VE3NEA if the new K3S might change the 24 kHz limitation
(Softrock on IF mode). Below is his response.
73, Bill W4ZV
Hi Bill,
Sorry for the late reply, I have just returned from a 2-week trip and
started to answer my email.
No, the presence of the USB and RS232 ports in the radio does
Below is the actual data and link to the public source of Rick's comment
about rigs used in WRTC.
73, Bill W4ZV
P.S. In case others missed it there was a major firmware update (MCU 4.86
DSP 2.83) on June 10. For some reason there was no announcement about it
(see http://www.elecraft.c
N1MM is probably the MOST popular contest logger. There are 4,580 current
members on the list below and you'll probably get answers there faster than
here.
https://groups.yahoo.com/neo/groups/N1MMLogger/info
73, Bill W4ZV
--
View this message in context:
http://elecraft.3657
uld I retouch all 8 pins or just the first 5?
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-Pinout-for-J2-headphone-jack-tp7585286.html
Sent from the Elecraft mailing list archive at Nabbl
14 102@100kHz
FTdx9000 Jul 10 114 101 13 100@100kHz
FT-450D Nov 11 98 85 13 96@100kHz
IC-7200 Jun 09 103 95 8 94@100kHz
Flex-1500 Dec 11 107 (88) 101 6 81@300kHz
Flex-5000A Jul 08 99 (96) 91 8 77@350kHz
http://www.sm5bsz.com/dynrange/dubus313.pdf
73, Bill W4ZV
--
View this message in c
Jorge Diez - CX6VM-2 wrote
> Will appreciate any feedback about the use of the second RX on the K3
>
> what are the uses for which it is essential to have the second receiver?
Hola Jorge!
1. Diversity RX. I use Beverages on my Main RX and a RX4SQ on the Sub RX.
Useful for improving RX in one
o hear off-frequency callers (although attenuated) and helps your ears
discriminate weak signals from noise by providing a wider background sample
of noise.
73, Bill W4ZV
Scott Monks wrote
> Sam;
> Your explanation is really good Sam, but it seems that something
> do
d one with high internal
resistance.
4. Lay the inductor on its side and be sure it is out of the way of the
screw hole/standoff that attaches the Control Board.
My K2 now has a very pure sidetone which will make zero beating much easier
without harmonic distortion.
73, Bill W4ZV
Sverre H
your shack? And the TX 160m
> distance and feed line used helix I'm guessing?
>
>
> 73,
> Fred/N0AZZ
> Monett, MO.
>
>
>
>
> -Original Message-
> From:
> elecraft-bounces@.qth
> [mailto:
> elecraft-bounces@.qth
> ] On Behalf Of
):
http://users.vnet.net/btippett/new_page_10.htm
I normally use Beverages on one port and an RX4SQ on the other port. I can
also switch between the RX4SQ and my TX array (Spitfire variant). On 80 and
160 I use diversity almost 100% of the time.
73, Bill W4ZV
--
View this message in context
om the West Coast is from
NA6MG (currently has 1436 Activator points and #3 overall in North America).
Dan uses a linked dipole supported by a 28' fiberglass mast (Jackite).
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KX3-Thanks-for-Advice
uying.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/KAF2-versus-AF1-versus-APF-tp7580191.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft mailing list
Home: http://mailm
RobertG wrote
> Bill...
> Every time I attempt to use APF I encounter so much ringing that it's
> more or less unusable. I'd appreciate any hint that you might have about
> "taming" this feature for use. Thanks.
Hi Robert,
Reduce the gain and narrow the XFIL/DSP bandwidth such that the desired
drewko wrote
> If you want to go lower than 300 Hz for your preferred cw pitch you
> could offset the RIT for the lower tone then compensate with SHIFT to
> bring it back to the center of the filter. A keyswitch macro could do
> this automatically if you hve a set pitch in mind, say 270.
That does
Hz was sometimes useful. I
was disappointed that the Elecraft K3's lowest pitch setting is 300 Hz but
have learned to "live with it".
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/CW-Pitch-Resolution-tp7579837p7580085.html
Sent from t
blocking in the presence of strong (S9+20) signals.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-Roofing-filters-tp7579774p7579777.html
Sent from the Elecraft mailing list archive at N
kit-whiterook.html
Of course you can also roll your own with some old relay parts. I did this
for my KD1JV ATS-3 Transceiver that I sometimes use for SOTA activations:
http://www.youtube.com/watch?v=wutov8MVr6Q
BTW you're near several SOTA summits in case you like to hike and operate
outdoo
allowed!
I'd stay away from a vertical. You'll have problems with manmade
interference in an apartment complex and vertical polarization will make it
worse. I'd go for a 44' doublet/inv-V supported by a nonconductive mast and
fed with twinlead...or an OCF fed with coax.
73,
n (CW
memories)
USB/LSB Mode Ind= VOX On
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/f-blinking-on-display-tp7579304p7579332.html
Sent from the Elecraft mailing list archive
various SOTA activators
ability to copy my signal from a summit (i.e. Summit-to-Summit QSOs). I
usually hear other SOTAs well but some are deaf as stones. I believe this
is due to inexperience by some in copying weak signals.
73, Bill W4ZV
--
View this message in context:
http://elec
html
http://www.extremeheadphones.com/products/ex-29-headphones
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-One-Last-Hearing-Story-tp7579040p7579054.html
Sent from the Elecraft mailing list archive at Nabble.com.
_
peterc281 wrote
> Thanks for the reply Bill. I remeasured the current. KRX3 on 1.82A off
> 1.52A so if the extra current is consistent with the KRX3 on and off with
> your measurement then I've got an extra 400mA sneaking off somewhere?
I measured mine again and got the following using the interna
peterc281 wrote
> Has anybody measured the current draw, is my 1.54A excessive?
With KRX3 activated mine measures ~1.4A @ 14.5V so I'd say not.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K3-overheating-smell-after-an-hour-or-so-tp7578806
ort are on a par with Elecraft's and I have no
connection with him other than being a very satisfied customer for several
of his products.
73, Bill W4ZV (LP-PAN #008)
--
View this message in context:
http://elecraft.365791.n2.nabble.com/CW-skimmer-setup-question-tp7578462p7578469.htm
in blocking dynamic range, and probably will continue to
for years to come. We're quite happy with our superhet architecture."
How refreshing that Elecraft has not been caught up in the direct sampling
SDR "technology for technology's sake" hype.
73, Bill W4ZV
Rick Prather-2 wrote
> Your post makes me wish I didn't have to wait a year to get out and do it
> again!
You don't need to wait. Discover Summits On The Air (SOTA) and you can do
it any time you like!
http://www.sota.org.uk/
73, Bill W4ZV
--
View this message i
applications. LA3ZA has
a very nice summary of most K2 mods with links here:
http://www.qslnet.de/member/la3za/K2/modAny.html
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/K2-sn-4900-5000-Upgrades-needed-tp7575646p7575654.html
Sent from the Elecraft mailing list
no changes so I
believe you're correct...and ATU INIT restored the correct 50 ohm values.
The strange thing to me about the original problem was that the ATU tuned
antennas correctly for transmit yet there was RX sensitivity loss on some
bands. Oh well...
73, Bill
On 6/18/2013 9:21 AM, Bi
ATU INIT appears to have restored the sensitivity loss on affected bands.
Anyone have any ideas what might have caused this problem? Hopefully ATU
INIT didn't create other problems!
73, Bill
Bill W4ZV wrote
> Mike K8CN and I both came to the same conclusion overnight. Check the
TX on all bands.
I guess it's time for some ATU troubleshooting but other ideas are
appreciated.
73, Bill W4ZV
Bill W4ZV wrote
> During a SOTA activation Saturday I used 17m quite a bit as well as 15 and
> 20. Sensitivity on 17m seemed weaker than on adjacent bands and I thought
my XG3 and indeed the 1uV setting is
noticeably weaker than on 15 and 20. I first redid RX alignment of L10 and
L11 on 15m and then C32 and C34 for 17m with no improvement. The S-meter
reads the same for all 3 XG3 levels but 1uV sounds weaker on 17. Anyone
have any ideas?
73, Bill W4ZV
--
le story about SOTA
activating using the K2 in the recent QRPTTF event:
http://www.uwharrieqrp.com/2013/04/qrpttf-and-rocky-knob-w4cem-047.html
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/A-Rob-Sherwood-s-talk-in-Dayton-tp7574814p7574932.html
Sent from t
ry for any company is to always maintain responsiveness
to customer input. So far that remains one of Elecraft's stellar strengths.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/After-Rob-Sherwood-s-Talk-at-Dayton-tp7574928p7574931.html
Sent from
are ~5 years old (Fall of 2008 I
think he said). Responding to problems is a hallmark of Elecraft and
something that you won't find from most manufacturers (e.g. has Kenwood yet
responded to the TX spike issue?)
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.
ey consideration in their
thinking (as opposed to Japan's Big 3). I only wish more manufacturers
thought the same way.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/A-Rob-Sherwood-s-talk-in-Dayton-tp7574814p7574842.html
Sent from the Elecraft maili
which affect this.
73, Bill W4ZV
--
View this message in context:
http://elecraft.365791.n2.nabble.com/A-Rob-Sherwood-s-talk-in-Dayton-tp7574814p7574830.html
Sent from the Elecraft mailing list archive at Nabble.com.
__
Elecraft m
1 - 100 of 989 matches
Mail list logo