__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Ray K2HYD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
73 de Ray-ND8L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support
Good Day!
I have a new, still sealed in the Elecraft shipping box KIO3BUPKT.
Purchased in July, 2023. I've decided to stick with my microHam interface.
$475.00 Shipped CONUS. Save yourself $60.00.
PayPal F OK
73, Ray - ND8L
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
That is excellent news Eric that you hope to appoint to appoint Moonraker as
the UK agent and that they might have a UK service centre.
73
Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help
amateur.
Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help
If you are using Attic Antenna's ..
I would focus on the Power lines.
wa6vab Ray k3
On Sat, Jul 29, 2023 at 10:11 AM Rick NK7I wrote:
> Heh, try Hardee board (concrete) or aluminum siding, or stucco (wire
> based to hold it together). Or clay brick roofing.
>
> BUT that also c
FYI..
https://www.repeater-builder.com/tech-info/bonding/amateur-radio-bonding.html
wa6vab Ray K3
On Fri, Jul 28, 2023 at 5:59 PM David Gilbert wrote:
>
> I suspect that is the rule rather than the exception. I have seen
> several satellite and cable TV installati
I worked a Number of Years as a Broadcast Engineer.
The Broadcast Industry has Put this one to bed years ago.
No Need to re-invent the Wheel. Yes, it will Cost some Dollars
to do it Right, but it can save YOUR Equipment.
Ray WA6VAB K3
On Fri, Jul 28, 2023 at 3:51 PM Rick NK7I wrote
Hi Allan
Check out your QRZ Email.
I sent you a message re your K2 this morning
73
Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
My thanks for the helpful comments and suggestions received both on the list
and by private Email
Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Thanks Fred for the suggestion of using a Dow-Key relay, but they seem to be
unavailable in UK/Europe except on Ebay secondhand for $120 or more & those
are mostly 24V rather than 12V.
Are there any alternatives
Ray G3XLG
__
Elec
frequency flexibility.
If I use my K2 as the receiver, will it be sufficient when transmitting, to
switch the antenna to the transmitter and ground the K2 antenna port to
avoid damage to the K2?
73
Ray G3XLG
__
Elecraft mailing list
Home
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list:
Thanks guys for all the advice & helpful suggestions. The KPA1500 is now
working correctly with the Flex and as I want to use it below my desk, it is
now beiung controlled using the KPA1500 Remote Ap
73 Ray G3XLG
Sent from Mail for Win
Dave, thanks for the tip to use the KPA1500 Remote Ap which I have now
downloaded. Now I have to try to connect to it using a USB cable to the PC
Ray G3XLG
Sent from Mail for Windows
__
Elecraft mailing list
Home: http
the KPA1500 on my Windows PC as I
would like to locate the amp below my operating desk? I suspect I can do this
using the KPA1500 Utility program but wondered if there is a better method or
3rd party software for this purpose?
73
Ray G3XLG
Sent from Mail for Windows
To measure RF power accurately, it needs to be into a Known Impedance.
I would run the RF Calibrate Test, in the K3 Utility program.
Ray WA6VVAB K3
Sent from Mail for Windows
From: Josep via Elecraft
Sent: Monday, June 6, 2022 7:32 AM
To: Elecraft Reflector
Subject: [Elecraft] K3 50MHz power
Did Elecraft make a FTdx Series of Radio Equipment ???
I Must have missed it. Did I sign in to the Wrong thread………..
Ray WA6VAB Elecraft K3
From: Joe Subich, W4TV
Sent: Thursday, May 5, 2022 12:39 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] KAT 500 and the Yaesu FTDX10
Dynamic Switching Mode.
Ray WA6VAB K3 (sum what Retired)
From: Jim Brown
Sent: Saturday, April 30, 2022 10:26 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Follow-up to OT
On 4/27/2022 2:45 PM, jerry wrote:
> Samlex inverters
These inverters are NOT quiet. Slide 213 in this pdf sh
I unfortunately worked for the DoD,
And we had Many of the KWM-380’s-- Many Problems !
Ray WA6VAB
From: Ed W0YK
Sent: Sunday, April 3, 2022 4:32 AM
To: Bill Tippett; Elecraft Reflector
Subject: Re: [Elecraft] KWM-380 (was K4 and Delivery Delays)
I'm not surprised. The receiver is chock
Chuck……. Great information for the K3 Radio’s
Ray WA6VAB K3
From: Charles K0MV
Sent: Tuesday, March 29, 2022 6:30 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Heat Sink Compound Question
Hi Tony,
I posted this reply last November.
This topic appeared on the list previously
I think the DX window is 3.790 +/- .
WA6VAB K3 Ray
From: Richard
Sent: Thursday, February 17, 2022 9:05 AM
To: Elecraft Mailing List
Subject: [Elecraft] 80-meter Antenna Fun
I’m in the process of tuning a just-finished 80-meter “triangular loop.” So
far, the early signs are encouraging.
I
When in Dough Read the manual.
WA6VAB Ray K3
From: Bob Wilson, N6TV
Sent: Friday, February 11, 2022 12:10 PM
To: Pete Smith N4ZR; Elecraft Reflector
Subject: Re: [Elecraft] When is a Key Out not a Key Out
Elecraft and ACOM amplifiers have a jack labeled KEY IN, so connecting KEY
OUT to KEY
Dr William……….
Time to hook your radio up to a 50 Ohm Dummy Load, and Retake readings.
Ray WA6VAB K3
From: Dr. William J. Schmidt
Sent: Tuesday, February 1, 2022 6:40 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] HI CURR indicator on K3S display
Unfortunately, my metering outside
Where is this Data Connector located on the K4 ?
The KPOD documentation only refers to the K3 & K3S and is not updated for the K4
73 Ray G3XLG
Sent from Mail for Windows
__
Elecraft mailing list
Home: http://mailman.qth.net/mai
I found Lots of SNAKES in Texas !
WA6VAB Ray K3
From: Fred Jensen
Sent: Monday, January 17, 2022 1:34 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] On ground - in ground radials
Yes. A long time ago on the engineering crew at KSBY-TV, the station
would rent us out to some
I worked at a large Computer Company in Cupertino, and we used Water Soluble
Flux,
Then washed the Boards in a Dishwasher, with Water.
Open Air Drying to keep water from Wicking into any Parts.
Ray WA6VAB Engineering. K3
From: Hal Massey
Sent: Sunday, January 2, 2022 9:11 AM
To: Jim
The K3 Does have a Similar Ckt.
Press the AFX button on the Key pad.
WA6VAB K3
From: Victor Rosenthal 4X6GP
Sent: Sunday, December 26, 2021 12:28 PM
To: Julia Tuttle; jerry
Cc: Elecraft
Subject: Re: [Elecraft] Simulated stereo
Yes, that would be great. The K3 doesn't do that, unfortunately.
Gents
Go to a WWV signal, (5.00) on a Good Strong Frequency.
Place the Mode To Upper SSB, Listen to the Beat note Tone Freq,
Now Move the Mode to Lower SSB. Adjust the Ref. Cal. Osc. until the Beat Note
is the Exact Same Freq
On Lower SSB and Upper SSB. Done
Ray WA6VAB K3
rom: Wes
I am Not a big fan of the K3 Noise reduction !
NB work OK, but NR is Poor!
That’s My 2 Cents worth. Ray WA6VAB
From: Alan Higbie
Sent: Wednesday, December 15, 2021 7:46 AM
To: David Hachadorian
Cc: Reflector Elecraft
Subject: Re: [Elecraft] K3 Noise Reduction
I too was skeptical about finding
The Problem recovers.
I wou;ld Clean All Cables, Sockets and Plugs
Power Supply Connections FIRST.
Ray WA6VAB K3
From: Michael Carter
Sent: Monday, November 29, 2021 9:08 PM
To: Elecraft@mailman.qth.net
Subject: Re: [Elecraft] P3 Issue
Ken,
I have not experienced the difficulty
with my P3
Its done Every Day.
Look at Russia and China !
Yes, it takes a very Special Skill set..
Ray WA6VAB K3
From: David Gilbert
Sent: Friday, November 26, 2021 3:37 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Need K3 Board
Would you try to replicate that board from that schematic
The schematic is Published, Check the Elecraft K3 site.
Ray WA6VAB K3
From: Julia Tuttle
Sent: Friday, November 26, 2021 2:27 PM
To: Fred Jensen
Cc: Elecraft
Subject: Re: [Elecraft] Need K3 Board
I can see that for the radios themselves, but something like an IO board
seems less likely to have
Are at this AGAIN !
WA6VAB Ray K3
From: Bob McGraw
Sent: Thursday, November 25, 2021 8:22 PM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Legal Limit With FT8
Does he blot out your K3S on all bands, or just if you if both are on
the same band?
I have some avid DX'ers within 20 miles
ALL……..
All we need is More Regulations in the Amateurs’ World.
Ray WA6VAB K3
From: Jim Brown
Sent: Wednesday, November 10, 2021 11:18 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Legal Limit With FT8
On 11/10/2021 10:36 PM, Rick Tavan wrote:
> I must be missing something.
Great Article…….
WA6VAB Ray K3
Sent from Mail for Windows
From: CUTTER DAVID via Elecraft
Sent: Friday, November 5, 2021 4:24 AM
To: k...@altaeng.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Problem Tuning K3: now off centre fed dipole
Chuck
I'm not an expert but you might find
Jim……
First….. what length is your OCFD ?
2nd…… What Height above ground ?
3rd…… What Feed line are you using ?
4th …… What Band do you Operate on Most ?
I can Model the Antenna and give you the results .
Ray WA6VAB K3
From: CUTTER DAVID via Elecraft
Sent: Tuesday, November 2, 2021 11
I agree…. Feedline’s Best Friend !
WA6VAB Ray K3
From: Bill via Elecraft
Sent: Tuesday, November 2, 2021 6:15 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] Problem Tuning K3
Jim,
I assume your using a balun with your
OFC antenna. I had a similar problem with my OCF that turned out
Your Guessing !
Did you Model it ???
Then you will know……..
Ray WA6VAB K3
Windows 0
From: Bob McGraw
Sent: Saturday, October 30, 2021 6:17 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] center fed dipole
I don't understand the use of the 4:1 balun. On 80M the feed Z of that
antenna
The Ground should be Attached to the Equipment,
Not to the Antenna lead.
Ray WA6VAB K3
From: David Ferrington, M0XDF
Sent: Thursday, September 30, 2021 8:20 AM
To: Ted Edwards W3TB
Cc: ElecraftList
Subject: Re: [Elecraft] KAT500 - does it earth antenna connections
Or connect a dummy load via
Yes, Alarm and Remote Operations Settings.
Ray WA6VAB K3
Windows 0
From: Drew AF2Z
Sent: Thursday, September 16, 2021 5:13 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] K3 Display Won't Shut Off
I've had the same effect by setting the K3's Alarm to ON then turning
off the p/s
Does this program work with the K4?
73
Ray G3XLG
Sent from Mail for Windows
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
Thanks Bob for your advice.
I disconnected the ACC cable from the K4D and started it again. All OK this
time and the rig booted up normally showing Beta release 22 when clicking Fn>SW
List.
Many thanks Bob
73
Ray G3XLG
Sent from Mail for Wind
Ray …Are you posting your Request on the K4 Page ?
Ray WA6VAB K3
From: Ray Spreadbury via Elecraft
Sent: Sunday, August 29, 2021 1:09 AM
To: elecraft@mailman.qth.net
Subject: [Elecraft] New K4 beta software available release 22
Well I downloaded this new release and installed
LED’s lit.
Any ideas what to do next please?
73
Ray G3XLG
Sent from Mail for Windows
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft
Thank you guys for the responses both here and direct. I have checked my two
monitors and both unfortunately only have the one HDMI input. So, I have now
ordered an HDMI switch as suggested by several. Many thanks for the help.
73 Ray G3XLG
Sent from Mail for Windows
73
Ray G3XLG
Sent from Mail for Windows
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
screen from the
PC?
If so, what steps do I need to take please?
73 Ray G3XLG
Sent from Mail for Windows
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post
Software is NEVER complete……. Ask Microsoft !
WA6VAB Ray K3
From: Barry Baines via Elecraft
Sent: Monday, August 16, 2021 10:24 PM
To: David Gilbert
Cc: elecraft@mailman.qth.net
Subject: [Elecraft] OFFLIST: Re: K4 delivery status
Hi Dave:
> On Aug 17, 2021, at 12:04 AM, David Gilbert wr
All…… When in Dough, Look it UP !
Too Easy……… WA6VAB Ray K3
From: David F. Reed
Sent: Friday, August 6, 2021 5:30 AM
To: James F. Boehner, MD
Cc: Elecraft List
Subject: Re: [Elecraft] wall outlet for KPA1500
The electrician was confused; there is a similar 120V only plug, the difference
30 Amp --- A little too High for me !
I would use 25 Amp.
WA6VAB Ray K3
From: Dave
Sent: Wednesday, July 21, 2021 7:43 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] In Line Power Pole Fuses
Hi,
I am unsure what you are asking... If you are asking about fuse values,
I select
The Statement "This tuner will tune an 8:1 mismatch."
Is made in an Armature world, buy an Amateur person,
Not for a Professional Product by Calibrated Test Equipment.
This is Not New, it has happened for Decades. Buyer Beware.
WA6VAB Ray K3
From: Al Lorona
Sent: Tuesday, July
Put them right across the 50 Ohm input.
Break-down was 95 volts.
If you need Receive protection,
Maybe back to back 1n5711’s
Conduction at ~0.25 volts………. WA6VAB
From: Don Wilhelm
Sent: Tuesday, June 29, 2021 11:38 AM
To: Ray; Frank Krozel
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K2
In the Early days we used a NE-2 for front end Protection…..
Ray WA6VAB K3
From: Frank Krozel
Sent: Tuesday, June 29, 2021 9:33 AM
To: d...@w3fpr.com
Cc: Elecraft Reflector
Subject: Re: [Elecraft] K2 / ESD / Diodes D16 7 D17 replaced
Don as usual “Thank you”
Sincerely, Frank Krozel t: 1
It has a Serious Problem !
Do not pass Go , go directly to Costco and buy a New One.
They have concierge services and support is Good and last for Years,
if not the life of the product.
Ray WA6VAB
From: Jim Brown
Sent: Monday, June 28, 2021 7:32 PM
To: elecraft@mailman.qth.net
Subject: Re
Dick.
Many Programs were written in Basic and Still Work.
Also my VNA still runs under Win 7( not Win 10 )
So….. Life in the Technology Fast Lane.
Ray WA6VAB K3
Sent from Mail for Windows 10
From: Dick
Sent: Monday, June 28, 2021 6:09 PM
To: Elecraft@mailman.qth.net
Subject: [Elecraft] Old DOS
Did You Trying Transmitting in CW mode with the Mic disconnected ?
WA6VAB ray
From: Wayne Burdick
Sent: Saturday, June 19, 2021 11:41 AM
To: Tom Doligalski
Cc: Elecraft Reflector; John Harper
Subject: Re: [Elecraft] K4 observation
> On Jun 19, 2021, at 3:17 AM, Tom Doligalski wr
will
try and update.
73
Ray G3XLG
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list
The K3S is connected using the Elecraft RS232P3 cable and in the P3, the radio
selected is the K3 and the RS232 speed is 38400 baud.
I believe the cable is working OK as I am connecting from the P3 RS232 port to
my PC at 38400 for CAT control in my logger.
Any other ideas please?
73 Ray G3XLG
To: HB9CVQ……. Sir.
Thanks for the Real Information on these Radio’s, will apply.
WA6VAB Ray K3
From: hb9...@hispeed.ch
Sent: Wednesday, June 9, 2021 4:52 AM
To: 'Morgan Bailey'; 'Ray'
Cc: 'Elecraft'
Subject: AW: [Elecraft] A Clarification: IC-7300 vs FTDX10
Yes, I agree, I also prefer
My new to me P3 is not displaying the frequency but rather at the top has a 0
in the middle and +5, and -5 at either end if the spread is set to 10 for
example. How do I get the frequency displayed please?
73 Ray G3XLG
Sent from Mail for Windows 10
Like the Old Saying……
If you cant Hear them You cant Work them……….
That is WHY that is a $1000.00 Radio.
Good Luck Hunting the DX……
Ray WA6VAB K3
From: Don Wilhelm
Sent: Tuesday, June 8, 2021 4:35 PM
To: Richard; Elecraft
Subject: Re: [Elecraft] A Clarification: IC-7300 vs FTDX10
Richard
Mirage and KLM have VHF Amplifiers for SSB.
You can find Used ones at Swaps or QTH.com
73 WA6VAB Ray
From: Eric Garner
Sent: Tuesday, June 1, 2021 9:22 AM
To: David Herring
Cc: Elecraft
Subject: Re: [Elecraft] 2 meter PA
RM Italy makes amps that would fit the bill. DX Engineering carries
I Though it was 52 Ohms ?
WA6VAB Ray K3 #3824
From: Bob McGraw
Sent: Wednesday, May 19, 2021 1:43 PM
To: elecraft@mailman.qth.net; t...@w7sua.org
Subject: [Elecraft] Funny K4 Story i.e. SWR
Most all SWR meters relative instruments. Meaning they provide an
indication in terms of ratio
My K3 has a SWR display next to the RF Power meter in the Display.
So it Sounds like the K4 Does Not have that type of Display ?
WA6VAB K3
From: Roger Stein
Sent: Sunday, May 16, 2021 7:11 AM
To: Tom Doligalski
Cc: Elecraft List
Subject: Re: [Elecraft] Funny K4 Story
Great story and wisdom
Is this an Advertisement ?
From: Alan D. Wilcox
Sent: Tuesday, April 27, 2021 10:23 AM
To: Elecraft Reflector
Subject: [Elecraft] [K3][K2][K1] Legacy Update, Tuneup, Rescue, Build Services
"W3DVX Rescues Legacy Elecrafts"
Hello,
Now doing K3 updating mods to legacy K3's.
Ace Hardware has some screws in Black.
WA6VAB Ray K3 #3824
From: Don Wilhelm
Sent: Tuesday, April 13, 2021 2:49 PM
To: Tommy Judson; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Elecraft Digest, Vol 204, Issue 6
Tommy,
I highly recommend that you get the proper screws from Elecraft
Maybe Eric should just say……..
Life with the corona virus has delayed everything by One Year,
So it is with the Delivery of the K4 !
I am sure You would not Accept or be Happy Either !
Ray WA6VAB K3
From: David Gilbert
Sent: Tuesday, March 30, 2021 2:38 PM
To: Hal Massey
Cc: elecraft
1, load to Ant 1.
Verify on K3 DVM , voltage is 13 volts.
Push Tune button (long for TX – with RF)
Adjust PWR knob Clockwise for Max RF power.
Take readings………. Ray WA6VAB K3
From: Christian Janssen DL1MGB
Sent: Wednesday, March 24, 2021 1:49 PM
To: Harald Fritzsche (DD0VS); elecraft
Igor……
I don’t have the Installation info on the K3,
But I found the Transistor data online for the RD100HHF.
It is 1 Amp Idq. For Each Fet. Also a Amplifier Build Project.
http://k9ivb.net/munin2/
WA6VAB Ray K3
From: Igor Sokolov
Sent: Tuesday, February 9, 2021 9:46 AM
To: elecraft
Trust the Wattmeter Only if it is seeing a 50 Ohm Dummy Load.
WA6VAB Ray
From: Jim McCook
Sent: Saturday, February 6, 2021 11:35 AM
To: Elecraft Reflector
Subject: Re: [Elecraft] KPA-1500 power reading?
I trust my Bird 43 wattmeter that's in line with the amplifier output,
so I recalibrated
logging program windows open as well as
a separately floating K4 panadaptor display showing on the same monitor.
73 Ray G3XLG
73 Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http
outputs onto a single screen?
73
Ray G3XLG
Sent from Mail for Windows 10
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
T
I wonder if it is possible to show the panadaptor(s) display as a separate
floating window on the external monitor?
So that for example you could have your logging program windows open as well as
a separately floating K4 panadaptor display showing on the same monitor.
73 Ray G3XLG
Sent from
there ”intellectual property” to the World !
……….. just my 2 cents worth…….. Ray WA6VAB K3
From: Wes
Sent: Saturday, January 16, 2021 7:32 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] tip of 3.5 mm plug remains in key jack
Well, when you send your intellectual property and designs
John…. I would not Trust the information on Wikipedia.
Use the ARRL site for the information you are looking for on Band / Mode of
operations.
WA6VAB Ray K3
From: j...@kk9a.com
Sent: Tuesday, January 12, 2021 8:14 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] 80 meter net
I had Lots of work. Fixing the So called Garu’s problems !
Thanks WA6VAB
Sent from Mail for Windows 10
From: w...@w2xj.net
Sent: Friday, January 1, 2021 5:42 PM
To: Ray
Cc: donov...@erols.com; elecraft@mailman.qth.net
Subject: Re: [Elecraft] External sound card advice needed to attach to K3
I use my standard computers sound card for Digital Mode, works Fine.
Save your money! Ray WA6VAB K3
Windows 10
From: donov...@erols.com
Sent: Friday, January 1, 2021 2:31 PM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] External sound card advice needed to attach to K3
Transmitting
Your Trying to figure out Propagation ?
GoodLuck WA6VAB
From: David Haines
Sent: Tuesday, December 15, 2020 9:47 AM
To: Louandzip; elecraft@mailman.qth.net
Subject: Re: [Elecraft] Ice on dipole under snow under ice
Update:
With one-quarter of one leg of the dipole still under ice, I got a
Seems like this is now the Kenwood page ?
Sent from Mail for Windows 10
From: j...@kk9a.com
Sent: Thursday, November 26, 2020 8:06 AM
To: elecraft@mailman.qth.net
Subject: Re: [Elecraft] Firmware development
T
__
Elecraft mailing
know it’s a 5K linear pot but does anyone know a Mouser part number or other
supplier please?
Would it be a good idea to replace the 3 other identical pots at the same time?
Similarly does anyone know the Mouser part number for the 5K audio taper AF
Gain pot?
73
Ray G3XLG
Sent from Mail
Thank you Don
73 Ray G3XLG
-Original Message-
From: Don Wilhelm
Sent: 19 October 2020 23:18
To: Ray Spreadbury ; elecraft@mailman.qth.net
Subject: Re: [Elecraft] K2 Firmware & Software
Ray,
I don't know about any software, but the latest firmware is available - the
most recent is
I can't find the link to the last versions of firmware & software for the
K2.
I know it was some years ago, but thought it would still be available on the
Elecraft site.
Does anybody have a link or can tell me the Version numbers?
73 Ray G
e driven element. I'm confident that the coax and
connectors are good. Which means it was most likely either the balun or the
loading coils I guess. I never thought there was a problem on the Amp but I
just wondered what else it might be.
73 R
to 7.030 with the bandwidth
covering the preferred Region 1 CW portion of the band ie7.000 to 7.040 and the
tuner is not needed.
73 Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman
Partners).
Because of Covid, this year we were all single Ops working from home rather
than just a few multi op stations.
My K3S & the KPA1500 worked faultlessly for the 24hours as did Wintest but I
wonder what was the cause of the SWR increasing over time & needing a
re-tun
would like to do similar in SSB contests using N1MM ie. from the K3S M1.M4
memory banks, rather than recording .wav files into N1MM.
Are there suitable macros available to do this?
73 Ray G3XLG
__
Elecraft mailing list
Home: http
t!
Thanks for listening.
73
Ray K2HYD
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please he
Spot on Ian, ... yes it did have the recent W10 update so that could have
been the problem!
Cheers & 73
Ray G3XLG
__
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq
lly & with the new PC I was able to
download a new copy of the Utility program & the latest firmware. This
connected immediately to the K3S.
So, what was wrong & why did it not work before?
I have absolutely no idea!
73 Ray G3XLG
__
1 - 100 of 471 matches
Mail list logo