Re: [Emc-developers] Buildbot(s)

d printers with no stability problems. Much longer uptimes than this wintel machine. So skip the troublesome bookworm. My $0,02... Original message From: andy pugh Date: 2024-09-15 10:34 a.m. (GMT-08:00) To: EMC developers Subject: Re: [Emc-developers] Buildbot(s) On Su

Re: [Emc-developers] Buildbot(s)

active dev team becomes smaller, this problem becomes more important. Who has the knowledge to set up an alternative? Chris Sent from my Galaxy Original message From: andy pugh Date: 2024-09-15 10:34 a.m. (GMT-08:00) To: EMC developers Subject: Re: [Emc-developers] Buildbot

Re: [Emc-developers] Buildbot(s)

On Sun, 15 Sept 2024 at 17:50, Greg C wrote: > Just wanted to bump this as it was brought up on the forum today. It seems > the buildbot(s) have been down since July. Docs arent being built. 2.9 debs are still being built, but only for Buster (which went out of LTS in July, so shouldn't be enc

Re: [Emc-developers] Buildbot(s)

**politely taps microphone ... is this thing on??** Just wanted to bump this as it was brought up on the forum today. It seems the buildbot(s) have been down since July. Docs arent being built. Is there a way to get this going again, or should we start to direct users to build their own package

Re: [Emc-developers] buildbot is down

On 1/6/24 17:27, Chris Morley wrote: help please :) Thanks. Thanks for the bug report, the VM host crashed, fixed now. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/

Re: [Emc-developers] Buildbot Failing

On 12/6/23 18:06, Phill Carter via Emc-developers wrote: Buildbot is failing with the following: fatal: Unable to create '/home/buildslave/emc2-buildbot/wheezy-rtai-i386-clang/wheezy-rtai-i386-clang/source/.git/packed-refs.lock': Read-only file system Thanks for the bug report, this should be

Re: [Emc-developers] Buildbot Error

On 11/5/23 18:02, Phill Carter via Emc-developers wrote: It seems that Builder 4041.deb-buster-rtpreempt-amd64 has run out of disk space. Thanks for the bug report. Should be fixed now. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-d

Re: [Emc-developers] Buildbot

On 8/10/23 20:20, gene heskett wrote: ping On 8/10/23 13:33, gene heskett wrote: On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the wor

Re: [Emc-developers] Buildbot

On 8/10/23 13:33, gene heskett wrote: On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the lin

Re: [Emc-developers] Buildbot

On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the linuxcnc source code, builds and tests it,

Re: [Emc-developers] Buildbot

On 8/10/23 12:09, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the linuxcnc source code, builds and tests it,

Re: [Emc-developers] Buildbot

On 8/10/23 10:45, Sebastian Kuzminsky wrote: On 8/10/23 02:31, Phill Carter via Emc-developers wrote: Buildbot seems to be asleep. Thanks for the bug report.  The Raspberry Pi 4 had crashed again and the buildbot was waiting for it, holding things up.  I rebooted it and now it's moving forwa

Re: [Emc-developers] Buildbot

Aah thanks. That is interesting. Do we have an ETA for the new build? How long does a build take usually? On 2023/08/10 18:08, Sebastian Kuzminsky wrote: On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation

Re: [Emc-developers] Buildbot

On 8/10/23 09:38, Marius wrote: Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? The Pi is one of the workers in the buildbot, it checks out the linuxcnc source code, builds and tests it, and builds & uploads its Raspberry Pi OS Bus

Re: [Emc-developers] Buildbot

Just so I understand please. Did the RPi 4 code crash or are you using a RPi 4 to do some of the compilation? On 2023/08/10 16:44, Sebastian Kuzminsky wrote: On 8/10/23 02:31, Phill Carter via Emc-developers wrote: Buildbot seems to be asleep. Thanks for the bug report.  The Raspberry Pi 4 h

Re: [Emc-developers] Buildbot

On 8/10/23 02:31, Phill Carter via Emc-developers wrote: Buildbot seems to be asleep. Thanks for the bug report. The Raspberry Pi 4 had crashed again and the buildbot was waiting for it, holding things up. I rebooted it and now it's moving forward again. -- Sebastian Kuzminsky

Re: [Emc-developers] Buildbot

Please correct me if I am wrong. The current buildbot hosted and mentioned by Seb: The buildbot currently consists of ~20 VMs, each with 2 CPUs, 4 GB RAM, and ~20 GB disk. The buildmaster has 200 GB disk, mostly to host the package archive some of those VMs can be retired when we EOL 2.8 The

Re: [Emc-developers] buildbot? no updates in about a week now.

On Friday, 10 June 2022 09:12:50 EDT gene heskett wrote: > On Friday, 10 June 2022 08:12:14 EDT andy pugh wrote: > > On Fri, 10 Jun 2022 at 13:05, gene heskett > > wrote: > > > I just looked, no backports. > > > > This is a private "backport". ie the deb file is on the LinuxCNC > > repository. h

Re: [Emc-developers] buildbot? no updates in about a week now.

On Friday, 10 June 2022 08:12:14 EDT andy pugh wrote: > On Fri, 10 Jun 2022 at 13:05, gene heskett wrote: > > I just looked, no backports. > > This is a private "backport". ie the deb file is on the LinuxCNC > repository. https://www.linuxcnc.org/dists/buster/base/binary-amd64/ > > Including fo

Re: [Emc-developers] buildbot? no updates in about a week now.

On Fri, 10 Jun 2022 at 13:05, gene heskett wrote: > I just looked, no backports. This is a private "backport". ie the deb file is on the LinuxCNC repository. https://www.linuxcnc.org/dists/buster/base/binary-amd64/ Including for armhf: https://www.linuxcnc.org/dists/buster/base/binary-armhf/ S

Re: [Emc-developers] buildbot? no updates in about a week now.

On Friday, 10 June 2022 06:19:18 EDT andy pugh wrote: > On Fri, 10 Jun 2022 at 11:04, Sebastian Kuzminsky wrote: > > 1. Having the code & the docs live together in one repo makes it > > easier to update both when either changes (ie, in the same PR), and > > simplifies release management. > > It

Re: [Emc-developers] buildbot? no updates in about a week now.

On Fri, 10 Jun 2022 at 11:04, Sebastian Kuzminsky wrote: > 1. Having the code & the docs live together in one repo makes it easier > to update both when either changes (ie, in the same PR), and simplifies > release management. It also provides a way to see what new features are and how to use th

Re: [Emc-developers] buildbot? no updates in about a week now.

On 6/10/22 11:30, Jérémie Tarot wrote: What about splitting out the docs in dedicated packages like many other projects? We could have linuxcnc-doc for english and then linuxcnc-doc-$lang for translations. This in turn would allow us to build docs translation packages at will. In the future, t

Re: [Emc-developers] buildbot? no updates in about a week now.

Le jeu. 9 juin 2022 à 14:38, Sebastian Kuzminsky a écrit : > > > We could teach our debian packaging to know about build profiles > (https://wiki.debian.org/BuildProfileSpec) and then switch the CI to use > the `nodoc` build profile, but that would leave our poor old Buster > users without local

Re: [Emc-developers] buildbot? no updates in about a week now.

On 6/9/22 14:08, Hans Unzner wrote: I only wonder why Petters fix ( https://github.com/LinuxCNC/linuxcnc/pull/1754) which should use po4a only when the correct version is available, didn't resolve that. Petter's fix made the linuxcnc build system detect that the po4a on Buster is too old, and

Re: [Emc-developers] buildbot? no updates in about a week now.

On Thu, 9 Jun 2022 at 13:24, Greg C wrote: > > I am confused on this as well. Unless I am reading this incorrectly, there > were builds that did complete (albeit with warnings) after that commit was > merged? The issue in the logs seems to be a lack of pdf files to operate on. But the build sta

Re: [Emc-developers] buildbot? no updates in about a week now.

I am confused on this as well. Unless I am reading this incorrectly, there were builds that did complete (albeit with warnings) after that commit was merged? http://buildbot.linuxcnc.org/buildbot/grid On Thu, Jun 9, 2022 at 8:11 AM Hans Unzner wrote: > Am Do., 9. Juni 2022 um 11:25 Uhr schrieb

Re: [Emc-developers] buildbot? no updates in about a week now.

Am Do., 9. Juni 2022 um 11:25 Uhr schrieb Sebastian Kuzminsky < s...@highlab.com>: > On 6/9/22 10:42, andy pugh wrote: > > .deb builds are currently failing: > > > > > http://buildbot.linuxcnc.org/buildbot/builders/4041.deb-buster-rtpreempt-amd64/builds/1818 > > debs are failing because the wonder

Re: [Emc-developers] buildbot? no updates in about a week now.

On Thu, 9 Jun 2022 at 10:22, Sebastian Kuzminsky wrote: > So I think the best fix is to backport a working po4a to buster, and add > the updated po4a debs to our deb archive on wlo. > > I'm working on this now, hope to have something up later today. Thanks for that. I was planning to do exactly

Re: [Emc-developers] buildbot? no updates in about a week now.

On 6/9/22 10:42, andy pugh wrote: .deb builds are currently failing: http://buildbot.linuxcnc.org/buildbot/builders/4041.deb-buster-rtpreempt-amd64/builds/1818 debs are failing because the wonderful new translation infrastructure that just went into master requires a newer po4a than what's av

Re: [Emc-developers] buildbot? no updates in about a week now.

.deb builds are currently failing: http://buildbot.linuxcnc.org/buildbot/builders/4041.deb-buster-rtpreempt-amd64/builds/1818 -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lunatics." — George Fitch, Atl

Re: [Emc-developers] buildbot seems down

On Sun, 10 Apr 2022 at 19:01, Sebastian Kuzminsky wrote: > This brings up a question though... The only value of the buildbot > (over github Actions) is that the buildbot tests with the RTAI kernel, > right? It also creates the debs that (generally) get put on the ISO. Though those could be sou

Re: [Emc-developers] buildbot seems down

On 4/10/22 10:50, andy pugh wrote: On Sun, 10 Apr 2022 at 15:54, Sebastian Kuzminsky wrote: Fixed, thanks for the bug report. Is there scope for a Bullseye builder? (I am wondering about Bullseye for 2.9) It's on my todo list, but i'm so distracted these days that it's slow going. The ma

Re: [Emc-developers] buildbot seems down

On Sun, 10 Apr 2022 at 15:54, Sebastian Kuzminsky wrote: > Fixed, thanks for the bug report. Is there scope for a Bullseye builder? (I am wondering about Bullseye for 2.9) -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuse

Re: [Emc-developers] buildbot seems down

On 4/9/22 21:15, Chris Morley wrote: some builds say offline. Fixed, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers

Re: [Emc-developers] Buildbot Hung

On 1/10/22 4:39 PM, Phill C wrote: The Builbot appears to have been hung for a while. Kicked it, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/l

Re: [Emc-developers] Buildbot Asleep

I notice that buildbot is pushing for a migration to python3, and linuxcncs buildbot runs python 2.7 could it be this that is the issue http://buildbot.linuxcnc.org/buildbot/about http://buildbot.net/ On Mon, 3 Jan 2022, 00:59 Phill Carter, wrote: > Buildbot seems to not want to leave 202

Re: [Emc-developers] Buildbot Asleep

On Sunday, January 2, 2022 8:17:01 PM EST Phill Carter wrote: > Haha, me too. :) > > > On 3 Jan 2022, at 12:15 pm, Sam Sokolik wrote: > > > > I don't understand why any one or thing would want to stay in 2021.. Get in line guys... > > On Sun, Jan 2, 2022, 6:59 PM Phill Carter wrote: > >> Bu

Re: [Emc-developers] Buildbot Asleep

Haha, me too. :) > On 3 Jan 2022, at 12:15 pm, Sam Sokolik wrote: > > I don't understand why any one or thing would want to stay in 2021.. > > On Sun, Jan 2, 2022, 6:59 PM Phill Carter wrote: > >> Buildbot seems to not want to leave 2021. >> >> >> ___

Re: [Emc-developers] Buildbot Asleep

I don't understand why any one or thing would want to stay in 2021.. On Sun, Jan 2, 2022, 6:59 PM Phill Carter wrote: > Buildbot seems to not want to leave 2021. > > > ___ > Emc-developers mailing list > Emc-developers@lists.sourceforge.net > https://l

Re: [Emc-developers] Buildbot

On 3/6/21 11:49 PM, Phill Carter wrote: Buildbot has a lost slave. Bounced, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-d

Re: [Emc-developers] BuildBot

On 12/30/20 8:08 PM, Phill Carter wrote: Buildbot seems to have been asleep for a while. The wheezy-i386 buildslave locked up, I rebooted it and now the buildbot is making progress again. Thanks for the bug report. -- Sebastian Kuzminsky ___ Em

Re: [Emc-developers] BuildBot

On Wednesday 30 December 2020 22:08:51 Phill Carter wrote: > Buildbot seems to have been asleep for a while. I'll agree, nothing new for wintel stuff in close to a week. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in

Re: [Emc-developers] Buildbot stuck.

On Monday 21 December 2020 17:02:18 Chris Morley wrote: > Season greetings Seb. I'll 2nd that. Take care and stay well Seb. > Thanks for kicking the buildbot from time to time. Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Pleas

Re: [Emc-developers] Buildbot

You can provide email I’d of that person who can help us for developing our own cnc controller. Sent from myMail for iOS Wednesday, 14 October 2020, 9:39 PM +0530 from off...@klepp.biz : >Anno domini 2020 Wed, 14 Oct 19:05:58 +0300 >  jdsmoti...@gmail.com scripsit: >> >> Dear Sir, >> >>

Re: [Emc-developers] Buildbot

Anno domini 2020 Wed, 14 Oct 19:05:58 +0300 jdsmoti...@gmail.com scripsit: > > Dear Sir, > > We have our own hardware systems which can support to Linux. > > We know Linux cnc is open source plateform but we don’t know how to create > our own GUI and how to develop it. > > If anyone support t

Re: [Emc-developers] Buildbot

Dear Sir, We have our own hardware systems which can support to Linux. We know Linux cnc is open source plateform but we don’t know how to create our own GUI and how to develop it. If anyone support then we are ready to pay the development cost. Thanks  Sent from myMail for iOS Wednesday

Re: [Emc-developers] Buildbot

On Wed, 14 Oct 2020 at 15:02, wrote: > > We would like developing CNC controller with Linux platform. > > Are you right person for support? If yes then we will share our project > details. Yes and no. We are the right place to discuss LinuxCNC, but that is already a working CNC controller. --

Re: [Emc-developers] Buildbot

Hello Team, How are you? We would like developing CNC controller with Linux platform. Are you right person for support? If yes then we will share our project details. Thanks  Sent from myMail for iOS Wednesday, 14 October 2020, 2:09 AM +0530 from seb.kuzmin...@gmail.com : >On 10/10/20 7

Re: [Emc-developers] Buildbot

On 10/10/20 7:18 PM, Phill Carter wrote: Buildbot appers to be be asleep. Fixed. Thanks for the bug report. When the buildbot takes a vacation it's nearly always because one of the builders crashed and needs to be manually rebooted. -- Sebastian Kuzminsky ___

Re: [Emc-developers] Buildbot home page

Original message From: andy pugh Date: 8/9/20 7:29 pm (GMT+10:00) To: EMC developers Subject: Re: [Emc-developers] Buildbot home page On Sat, 5 Sep 2020 at 04:34, Phill Carter wrote:>> I took the liberty of editing the Buildbot home page to reflect the release

Re: [Emc-developers] Buildbot home page

On Sat, 5 Sep 2020 at 04:34, Phill Carter wrote: > > I took the liberty of editing the Buildbot home page to reflect the release > of 2.8 > > It may be previewed here: > >

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 13:01, Phill Carter wrote: > So it is OK to push changes to 2.8? You might as well. I have no idea what to do about the release now -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and

Re: [Emc-developers] Buildbot problems?

> On 1 Sep 2020, at 6:27 pm, andy pugh wrote: > > On Tue, 1 Sep 2020 at 00:52, Phill Carter wrote: > >> Thanks, I forgot to change the install instructions in the PlasmaC manual to >> reflect the change to 2.8 > > The online docs are always the latest, so the only thing that will > miss yo

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 00:52, Phill Carter wrote: > Thanks, I forgot to change the install instructions in the PlasmaC manual to > reflect the change to 2.8 The online docs are always the latest, so the only thing that will miss your next commit is the distributed PDF files that are in the insta

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 03:41, Dewey Garrett wrote: > The 'Address already in use' probably relates to an earlier problem and > likely needs manual intervention or a reboot of the reporting buildbot > instance(s). A reboot will (conventionally) rm the LOCKFILE in /tmp > as well. This is getting c

Re: [Emc-developers] Buildbot problems?

> It seems most of the errors relate to IO control > relate to a version error > iocontrol: machine: 'unknown' version 'unknown' this message is informational -- not an error that would cause termination >> Application initialization failed: no display name and no $DISPLAY >> environment varia

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > > I think that there are problems with the buildbot, but I know not what. I think I might have found the problem. On the builders that fail the tests we see 59 instances of this sequence: Running test: /home/buildslave/emc2-buildbot/wheezy-rtpre

Re: [Emc-developers] Buildbot problems?

> On 1 Sep 2020, at 9:48 am, andy pugh wrote: > > On Tue, 1 Sep 2020 at 00:20, Phill Carter wrote: > >> Is it too lateyet to add anything to 2.8? > > Yes. > But I don't think that 2.8.1 will be that long in coming. There is a > lot more Spanish translation due, for one thing. Thanks, I for

Re: [Emc-developers] Buildbot problems?

On Tue, 1 Sep 2020 at 00:20, Phill Carter wrote: > Is it too lateyet to add anything to 2.8? Yes. But I don't think that 2.8.1 will be that long in coming. There is a lot more Spanish translation due, for one thing. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designe

Re: [Emc-developers] Buildbot problems?

> On 1 Sep 2020, at 8:38 am, andy pugh wrote: > > On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > >> Four of the builders are failing runtests, but it isn't so much the >> tests that are failing as LinuxCNC itself. > > I have just realised that the three failed builds after my failed > (2.

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > Four of the builders are failing runtests, but it isn't so much the > tests that are failing as LinuxCNC itself. I have just realised that the three failed builds after my failed (2.8) build were master. I don't know if Master is building cleanly

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 23:18, andy pugh wrote: > http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/2207/steps/get-dmesg/logs/stdio > > It looks like motion-logger is segfaulting. Though I guess that might be effect rather than cause. Perhaps it is trying to cl

Re: [Emc-developers] Buildbot problems?

On Mon, 31 Aug 2020 at 17:56, andy pugh wrote: > > I think that there are problems with the buildbot, but I know not what. I have just noticed that one of the 4 sometimes dumps a dmesg: http://buildbot.linuxcnc.org/buildbot/builders/1610.rip-stretch-rtpreempt-i386/builds/2207/steps/get-dmesg/log

Re: [Emc-developers] Buildbot problems?

On Monday 31 August 2020 12:56:10 andy pugh wrote: > I think that there are problems with the buildbot, but I know not > what. > > Four of the builders are failing runtests, but it isn't so much the > tests that are failing as LinuxCNC itself. > > http://buildbot.linuxcnc.org/buildbot/builders/161

Re: [Emc-developers] Buildbot problems?

Andy, It seems most of the errors relate to IO control relate to a version error iocontrol: machine: 'unknown' version 'unknown' So do we need to change another version in the code? This seems to be where the error comes from on a cursory glance. https://github.com/LinuxCNC/linuxcnc/blob/2.8/s

Re: [Emc-developers] Buildbot output

On Wednesday 05 August 2020 13:52:34 Gene Heskett wrote: > On Wednesday 05 August 2020 12:35:38 andy pugh wrote: > > Can anyone interpret what is going on here? > > > > http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386 > >/b uilds/5596/steps/shell_3/logs/warnings%20%2830%29 > >

Re: [Emc-developers] Buildbot output

On Wednesday 05 August 2020 12:35:38 andy pugh wrote: > Can anyone interpret what is going on here? > > http://buildbot.linuxcnc.org/buildbot/builders/4007.deb-precise-i386/b >uilds/5596/steps/shell_3/logs/warnings%20%2830%29 > > It looks disturbingly corrupted. I've seen something like that befo

Re: [Emc-developers] Buildbot

On Mon, 30 Mar 2020 at 01:28, Phill Carter wrote: > > I cannot access the discs directory nor the waterfall I can get to the waterfall (and other results) but not /dists -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses,

Re: [Emc-developers] Buildbot Looks Stuck

On 3/7/20 1:04 AM, Chris Morley wrote: Hey Seb ..when you get a moment :) Fixed it, thanks for the bug report. -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo

Re: [Emc-developers] Buildbot Slaves

On Saturday 29 February 2020 08:05:34 Robert Murphy wrote: > Gene we can go the other way Raspbian on x86 > > https://magpi.raspberrypi.org/articles/install-raspberry-pi-desktop-x8 >6 And thats scary, dragging in yet another architectures warts. You see, one of the things I have tried to avoid a

Re: [Emc-developers] Buildbot Slaves

Gene we can go the other way Raspbian on x86 https://magpi.raspberrypi.org/articles/install-raspberry-pi-desktop-x86 On 29/2/20 3:00 pm, Gene Heskett wrote: On Friday 28 February 2020 13:53:20 Rod Webster wrote: Andy, Just to confirm, The permission was issued here thanks to Chris Morley: ht

Re: [Emc-developers] Buildbot Slaves

Hi Gene, It's unlikely that Mint supports the Pi. It's too much of a niche product. However LCNC doesn't really care what distro it is used with. As long as you satisfy the dependencies it's happy. For instance I have it running on Ubuntu rather than Debian. Pi is so different from the avera

Re: [Emc-developers] Buildbot Slaves

On Friday 28 February 2020 13:53:20 Rod Webster wrote: > Andy, > > Just to confirm, The permission was issued here thanks to Chris > Morley: https://forums.linuxmint.com/viewtopic.php?p=1489153#p1489153 > > Rod Webster > *1300 896 832* > +61 435 765 611 > VMN® > www.vmn.com.au > > On Sat, 29 Feb 2

Re: [Emc-developers] Buildbot Slaves

Andy, Just to confirm, The permission was issued here thanks to Chris Morley: https://forums.linuxmint.com/viewtopic.php?p=1489153#p1489153 Rod Webster *1300 896 832* +61 435 765 611 VMN® www.vmn.com.au On Sat, 29 Feb 2020 at 02:11, andy pugh wrote: > What is needed to add Buster RTAI and /

Re: [Emc-developers] Buildbot stuck?

On 2/28/20 2:58 AM, andy pugh wrote: The buildbot seems to have got stuck compiling 1530.rip-jessie-rtpreempt-amd64 The stdio seems to have stalled, and there are several other builds that seem to be stacked up behin

Re: [Emc-developers] Buildbot Documentation

On 2/19/20 10:16 PM, Phill Carter wrote: I have been getting 403 Forbidden on the http://buildbot.linuxcnc.org/doc/ page for several days. Fixed. Thanks for the bug report. The http://buildbot.linuxcnc.org/ page could do wi

Re: [Emc-developers] Buildbot

On Sat, 1 Feb 2020 at 04:02, Sebastian Kuzminsky wrote: > > I'm working on a buildbot upgrade, in order to support Debian Buster > builds. There will be plenty more failures this weekend... preempt-RT or will there be an RTAI too? (We have an RTAI kernel package available) -- atp "A motorcycle

Re: [Emc-developers] Buildbot on Buster

I do build on Buster, unfortunately I did not write down which packages I had to install. Are also able to use gladevcp if installing som more packages and manually install python-gtksourceview2_2.10.1-3_amd64.deb > On Sat, 1 Feb 2020 at 04:02, Sebastian Kuzminsky > wrote: > > > > I'm working

Re: [Emc-developers] Buildbot

On Sat, 1 Feb 2020 at 04:02, Sebastian Kuzminsky wrote: > > I'm working on a buildbot upgrade, in order to support Debian Buster > builds. Oooh! Thanks. -- atp "A motorcycle is a bicycle with a pandemonium attachment and is designed for the especial use of mechanical geniuses, daredevils and lu

Re: [Emc-developers] Buildbot

Thank you and good luck. > On 1 Feb 2020, at 2:59 pm, Sebastian Kuzminsky > wrote: > > I'm working on a buildbot upgrade, in order to support Debian Buster > builds. There will be plenty more failures this weekend... > > On Fri, Jan 31, 2020, 19:22 Phill Carter wrote: > >> Buildbot seems to

Re: [Emc-developers] Buildbot

I'm working on a buildbot upgrade, in order to support Debian Buster builds. There will be plenty more failures this weekend... On Fri, Jan 31, 2020, 19:22 Phill Carter wrote: > Buildbot seems to have stopped plus there are a lot of failed builds. > > Cheers, Phill. > > > __

Re: [Emc-developers] Buildbot

Sorry, I think I messed up my timezone calculations… Cheers, Phill. > On 17 Jan 2020, at 11:38 am, Sebastian Kuzminsky > wrote: > > On 1/16/20 5:32 PM, Phill Carter wrote: >> The Buildbot seems to be asleep. > > It looks fine to me, what problem are you seeing? > > > -- > Sebastian Kuzmins

Re: [Emc-developers] Buildbot

On 1/16/20 5:32 PM, Phill Carter wrote: The Buildbot seems to be asleep. It looks fine to me, what problem are you seeing? -- Sebastian Kuzminsky ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/li

Re: [Emc-developers] Buildbot for foreign branch

On 1/1/20 5:56 AM, mydani wrote: Hello guys, wish all of you a happy and healthy new year. Hoped someone can tell me how I can run a foreign branch through the linuxcnc build bot (or whether that's even possible). The LinuxCNC buildbot builds all branches in the official repo at github.com/L

Re: [Emc-developers] Buildbot

I saw the email and fixed the buildbot. On Wed, Nov 27, 2019, 04:48 John wrote: > You should email Seb... > > JT > > On 11/26/19 7:38 PM, Phillip Carter wrote: > > It looks like the Buildbot is down, I cannot access the waterfall. > > > > Cheers, Phill > > > > > > > > > > > > __

Re: [Emc-developers] Buildbot

You should email Seb... JT On 11/26/19 7:38 PM, Phillip Carter wrote: It looks like the Buildbot is down, I cannot access the waterfall. Cheers, Phill ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge

Re: [Emc-developers] Buildbot down?

On 9/18/19 5:04 AM, John wrote: They should be but I don't know where they are. This is one example I have. linuxcnc-build: force build --branch=2.8 .checkin You should email Seb, looks like the buildbot disks are full. It ran out of disk. I cleaned it up and rebooted it and now it's ba

Re: [Emc-developers] Buildbot down?

e? But the website for waterfall is unreachable so i don;t think that will fix the problem. Chris From: John Thornton Sent: September 17, 2019 6:19 PM To: emc-developers@lists.sourceforge.net Subject: Re: [Emc-developers] Buildbot down? Did you try forcing a buil

Re: [Emc-developers] Buildbot down?

I didn't - are the commands posted somewhere? But the website for waterfall is unreachable so i don;t think that will fix the problem. Chris From: John Thornton Sent: September 17, 2019 6:19 PM To: emc-developers@lists.sourceforge.net Subject: Re:

Re: [Emc-developers] Buildbot down?

Did you try forcing a build? JT On 9/17/2019 1:12 PM, Chris Morley wrote: Builds have stopped as of the 13th it seems... Chris ___ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-deve

Re: [Emc-developers] buildbot for arm64

f the uSD. > > > > I didn't see that, or I would have bought it. Inferred from the > > propaganda was that the rock64 could do that by itself. But if a dd > > like program could do it, it seems to me dmesg ought to ident the > > eMMC so dd would have a of=/dev/targ

Re: [Emc-developers] buildbot for arm64

total of twenty-five minutes to figure out the dependencies required to install and install the debs. Yea!!! Alan > Date: Sun, 28 Apr 2019 03:03:38 -0400 > From: Gene Heskett > To: emc-developers@lists.sourceforge.net > Subject: Re: [Emc-developers] buildbot for arm64

Re: [Emc-developers] buildbot for arm64

d have a of=/dev/target. But it doesn't seem to recognize it. Does yours before its been programmed? > > > Date: Sat, 27 Apr 2019 11:54:19 -0400 > > From: Gene Heskett > > To: emc-developers@lists.sourceforge.net > > Subject: Re: [Emc-developers] buildbot for arm

Re: [Emc-developers] buildbot for arm64

programmer and mount it on the board. When it is mounted on the board the board will boot from it instead of the uSD. Alan > Date: Sat, 27 Apr 2019 11:54:19 -0400 > From: Gene Heskett > To: emc-developers@lists.sourceforge.net > Subject: Re: [Emc-developers] buildbot for arm64

Re: [Emc-developers] buildbot fpr armhf?

On Saturday 27 April 2019 14:25:52 Sebastian Kuzminsky wrote: > On 4/26/19 9:11 PM, Gene Heskett wrote: > > Greetings all; > > > > I am wondering what has happened to the buildbot that was generating > > new images of master for my pi. My last linuxcnc update was in the > > middle of Sept 2018.

Re: [Emc-developers] buildbot fpr armhf?

On 4/26/19 9:11 PM, Gene Heskett wrote: Greetings all; I am wondering what has happened to the buildbot that was generating new images of master for my pi. My last linuxcnc update was in the middle of Sept 2018. Its beginning to feel neglected. ;-) The Odroid U2 machines I was using to build

Re: [Emc-developers] buildbot for arm64

On Saturday 27 April 2019 11:08:20 Alan Condit wrote: > I have just completed building 4.19.31 LTS preempt_rt for my RockPro64 > (on my RockPro64). I would love to have access to linuxcnc builds from > a buildbot for arm. It took about 8 hours to compile the kernel, so I > am not looking forward t

Re: [Emc-developers] Buildbot Platforms

On 05/24/2018 12:23 PM, Rene Hopf wrote: > > >> On 24. May 2018, at 18:55, Sebastian Kuzminsky wrote: >> >> Adding support for newer distros and producing installers ISOs with >> realtime kernels for those distros is a significant effort. Jeff has >> done a fantastic job making sure we run well

Re: [Emc-developers] Buildbot Platforms

> On 24. May 2018, at 18:55, Sebastian Kuzminsky wrote: > > Adding support for newer distros and producing installers ISOs with > realtime kernels for those distros is a significant effort. Jeff has > done a fantastic job making sure we run well on RT-Preempt, and > producing installer ISOs ba

  1   2   >