On Tue, 6/25/13, Alex Joni alex.j...@robcon.ro wrote:
Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Tuesday, June 25, 2013, 1:47 AM
The error is in your log:
[ 216.183331] RTAI[hal]:
On Tue, 6/25/13, Karl Schmidt k...@xtronics.com wrote:
Once on the ground, realize the need for a door and ceiling
that are wide and high enough. There is
a trick of using lots of round hardwood dowels - and kicking
them to steer. Safety is important in
moving these beasts.
On Tue, 6/25/13, Pete Matos petefro...@gmail.com wrote:
Then I used some rented machine mover skates to position it in its final
place.
Right now I have a 17x78 LeBlond Regal lathe on four Harbor Freight car
dollies. Moves pretty easily on a concrete floor.
2013/6/26 Gregg Eshelman g_ala...@yahoo.com
On Tue, 6/25/13, Alex Joni alex.j...@robcon.ro wrote:
Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Tuesday, June 25, 2013, 1:47 AM
The error
On Tue, 6/25/13, Bruce Klawiter bmkl...@yahoo.com wrote:
Subject: [Emc-users] OT, Programable winch design, need help
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Tuesday, June 25, 2013, 9:03 PM
I need help to get me started on this.
The winch is to drop and
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 6/25/2013 11:06 PM, Matt Shaver wrote:
On Mon, 24 Jun 2013 10:42:06 -0500 Stuart Stevenson
stus...@gmail.com wrote:
My first reaction is how could this be necessary? Are they not
wanting/able to capture a file to feed to the control? I am
Now LinuxCNC runs. So does the latency test.
On Wed, 6/26/13, Viesturs Lācis viesturs.la...@gmail.com wrote:
Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Wednesday, June 26, 2013, 2:03 AM
On 26.06.13 00:44, Gregg Eshelman wrote:
On Tue, 6/25/13, Pete Matos petefro...@gmail.com wrote:
Then I used some rented machine mover skates to position it in its final
place.
Right now I have a 17x78 LeBlond Regal lathe on four Harbor Freight
car dollies. Moves pretty easily on a
On 26.06.13 01:30, Gregg Eshelman wrote:
If you're near a coast or large/deep lake you might find a deal on a
used electric downrigger. Load it up with 300 pound test line and
there's your mechanicals, just need to figure out how to brake it to a
stop at the right moment without breaking
On Tue, Jun 25, 2013 at 10:31 PM, sam sokolik sa...@empirescreen.comwrote:
I forgot to post these.. (Thanks dad!)
http://www.electronicsam.com/images/KandT/Fest2013/
random pictures from the fest. I hope to organize them in the future.
sam
Sam,
Great pics! Anybody happen to get a
On Wed, Jun 26, 2013 at 3:35 AM, Gregg Eshelman g_ala...@yahoo.com wrote:
On Tue, 6/25/13, Alex Joni alex.j...@robcon.ro wrote:
Well that might fix it, if I knew how to change it from read only so it
can be edited. Were this Windows I could run a text editor with elevated
Administrator
On 26 June 2013 03:57, Pete Matos petefro...@gmail.com wrote:
How about a who's who description so we can tell from the
pictures who we are looking at.
I am possibly the worst possible person to do this, as I can't even
always remember my own name, but in a strict left-to right:
1301 Me, Jeff
There used to be problems with the boot partition size
with some disk/bios combinations
Dave Caroline
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
http://p.sf.net/sfu/windows-dev2dev
1301 Andy Pugh, Jeff Epler
1302 John Morris, Jeff Epler, Dave Bagby, Jon Elson, Chris Radek, Ken
Lerman, Seb Kuzminsky, Matt Shaver, Steve Stallings, Tim Shaver
1303 Dave Bagby, Chris Radek, Jon Elson, Ken Lerman behind window frame,
Seb, Matt Shaver, John Kasunich, Left arm of Michael Haberler,
On Wed, Jun 26, 2013 at 8:49 AM, Stuart Stevenson stus...@gmail.com wrote:
1301 Andy Pugh, Jeff Epler
1302 John Morris, Jeff Epler, Dave Bagby, Jon Elson, Chris Radek, Ken
snippage
Crap. Anybody got the link again? I mistakenly deleted it.
Mark
Darn, I wish I was there.
2013/6/26 Mark Wendt wendt.m...@gmail.com:
On Wed, Jun 26, 2013 at 8:49 AM, Stuart Stevenson stus...@gmail.com wrote:
1301 Andy Pugh, Jeff Epler
1302 John Morris, Jeff Epler, Dave Bagby, Jon Elson, Chris Radek, Ken
snippage
Crap. Anybody got the link again? I
http://www.electronicsam.com/images/KandT/Fest2013/
-Original Message-
From: Mark Wendt [mailto:wendt.m...@gmail.com]
Sent: Wednesday, June 26, 2013 8:56 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Wichita LinuxCNC meeting
On Wed, Jun 26, 2013 at 8:49 AM,
Thanks Steve. I saw them suspenders in the pictures and just knew it had
to be you. ;-)
Mark
On Wed, Jun 26, 2013 at 9:23 AM, Steve Stallings steve...@newsguy.comwrote:
http://www.electronicsam.com/images/KandT/Fest2013/
http://www.electronicsam.com/images/KandT/Fest2013/
Alex
-Original Message-
From: Mark Wendt
Sent: Wednesday, June 26, 2013 3:55 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Wichita LinuxCNC meeting
On Wed, Jun 26, 2013 at 8:49 AM, Stuart Stevenson
On Wed, Jun 26, 2013, at 05:29 AM, Erik Christiansen wrote:
On 26.06.13 01:30, Gregg Eshelman wrote:
If you're near a coast or large/deep lake you might find a deal on a
used electric downrigger. Load it up with 300 pound test line and
there's your mechanicals, just need to figure out how
On Wed, Jun 26, 2013 at 5:58 AM, Mark Wendt wendt.m...@gmail.com wrote:
On Wed, Jun 26, 2013 at 3:35 AM, Gregg Eshelman g_ala...@yahoo.com wrote:
On Windows I have my login with Administrator rights and turn off User
Account Control so I don't have the OS constantly pestering me about Do
you
Gentlemen,
I think annual meetings are nice for everyone. A small
developer/integrator meeting would be useful but if our annual meeting is
understood to be a developer/integrator meeting then we won't have
disappointed attendees. I believe people new to the LinuxCNC world benefit
greatly by
What is the max current I can draw on the 5V for the (per) encoder without
external power supply? Using 7I29 and 7I33.
Thanks,
--
This SF.net email is sponsored by Windows:
Build for Windows Store.
On Wed, Jun 26, 2013 at 9:56 AM, Eric Keller eekel...@psu.edu wrote:
snippage
Sudo is a way to give certain users some, or all, of the privileges given
to the root account. Do a man sudo to see what can be done,
privilege-wise, based on permissions set in the /etc/sudoers under the
I thinking hologram. Then the crash would appear real with breaking and
crumpling and everything. :)
On Wed, Jun 26, 2013 at 8:53 AM, John Kasunich jmkasun...@fastmail.fmwrote:
On Wed, Jun 26, 2013, at 05:29 AM, Erik Christiansen wrote:
On 26.06.13 01:30, Gregg Eshelman wrote:
If
On 06/24/2013 12:39 PM, Eric Keller wrote:
On Mon, Jun 24, 2013 at 12:21 PM, Sebastian Kuzminsky s...@highlab.com
wrote:
soapbox
This should work, but i think you'll be happier if you put a cheapo USB
wifi dongle in your LinuxCNC machine. I bet it wouldn't take much
research to find one
How would Michigan sound for a meeting? I only have two lathes up and
running at the moment but I hope to have three and maybe a mill with a
fourth axis up by next spring. I do not have a lot to offer as far as
development knowledge but I am ready to help in any way possible.
Jeff Johnson
On 6/26/2013 10:26 AM, emc-users-requ...@lists.sourceforge.net wrote:
Lacking a date and place by Nov 1 2013 I will set a date to have the
meeting in Wichita next year. This time we will post it in all places so
more can see it and plan for it. Any suggestions on the date are welcome.
Maybe
Erik Christiansen wrote:
On 26.06.13 01:30, Gregg Eshelman wrote:
If you're near a coast or large/deep lake you might find a deal on a
used electric downrigger. Load it up with 300 pound test line and
there's your mechanicals, just need to figure out how to brake it to a
stop at the right
On Wed, Jun 26, 2013 at 11:21 AM, Eric Keller eekel...@psu.edu wrote:
On Wed, Jun 26, 2013 at 10:22 AM, Mark Wendt wendt.m...@gmail.com wrote:
The root account is already created, but it's locked. At least it is on
every Ubuntu build I've ever done, either for LinuxCNC or the desktops
and
On Wed, Jun 26, 2013 at 10:22 AM, Mark Wendt wendt.m...@gmail.com wrote:
The root account is already created, but it's locked. At least it is on
every Ubuntu build I've ever done, either for LinuxCNC or the desktops and
laptops I've built here at work.
I'm pretty sure all you have to do is
On 06/26/2013 12:06 AM, Matt Shaver wrote:
When the 3D folks discover that they need offsets or homing, or any of
the other features of linuxcnc, we'll be there to help.
That's what I plan to demonstrate: get the M2 running with LCNC as many
folks have already done, then pile on improvements
When the 3D folks discover that they need offsets or homing, or any of
the other features of linuxcnc, we'll be there to help.
Offsets would actually be a great way to handle multiple extruder heads.
On Tue, Jun 25, 2013 at 10:06 PM, Matt Shaver m...@mattshaver.com wrote:
On Mon, 24 Jun
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On 6/26/2013 11:00 AM, Ed Nisley wrote:
On 06/26/2013 12:06 AM, Matt Shaver wrote:
When the 3D folks discover that they need offsets or homing, or
any of the other features of linuxcnc, we'll be there to help.
That's what I plan to demonstrate:
On 6/26/2013 10:26 AM, emc-users-requ...@lists.sourceforge.net wrote:
Lacking a date and place by Nov 1 2013 I will set a date to have the
meeting in Wichita next year. This time we will post it in all places so
more can see it and plan for it. Any suggestions on the date are welcome.
Maybe
On Wed, 2013-06-26 at 09:53 -0400, John Kasunich wrote:
On Wed, Jun 26, 2013, at 05:29 AM, Erik Christiansen wrote:
On 26.06.13 01:30, Gregg Eshelman wrote:
If you're near a coast or large/deep lake you might find a deal on a
used electric downrigger. Load it up with 300 pound test line
On Wed, 2013-06-26 at 09:26 -0500, Stuart Stevenson wrote:
I thinking hologram. Then the crash would appear real with breaking and
crumpling and everything. :)
Nice if you can carry it off. Complete with sound effects?
Dave
On Wed, Jun 26, 2013 at 8:53 AM, John Kasunich
I like Houston. I have a cousin with a machine shop there. A man that used
to develop and install MDSI's OpenCNC lives there. I would have a couple
people to bring from Houston.
On Wed, Jun 26, 2013 at 11:36 AM, Chris Kelley tensait...@gmail.com wrote:
On 6/26/2013 10:26 AM,
OR.
You can all come over to my house and work on/ play with my Cincinatti
Arrow 500 retrofit and I will buy the Pizza and sodas LOL Connor lives
nearby as do a lot of folks down in the Georgia area. Peace
Pete
On Wed, Jun 26, 2013 at 1:19 PM, Stuart Stevenson stus...@gmail.com
Sounds like we may have more than a few places to choose from. Exciting.
On Wed, Jun 26, 2013 at 12:27 PM, Pete Matos petefro...@gmail.com wrote:
OR.
You can all come over to my house and work on/ play with my Cincinatti
Arrow 500 retrofit and I will buy the Pizza and sodas LOL
On 06/26/2013 12:19 PM, Stuart Stevenson wrote:
---snip ---
A man that used
to develop and install MDSI's OpenCNC lives there.
--end snip --
would that be the gent who went on to head the US arm of PA?
http://www.powerautomation.com/
thx
TomP
btw i've sent some direct emails thanking people at
On 06/26/2013 12:13 PM, dave wrote:
On Wed, 2013-06-26 at 09:26 -0500, Stuart Stevenson wrote:
I thinking hologram. Then the crash would appear real with breaking and
crumpling and everything. :)
Nice if you can carry it off. Complete with sound effects?
...
make it look like it happens
Just heard back from the Executive Vice-President of TX/RX Labs about
hosting. He said, Let's do it!
So, Houston is definitely available any date y'all want.
On Wed, Jun 26, 2013 at 12:34 PM, Stuart Stevenson stus...@gmail.comwrote:
Sounds like we may have more than a few places to choose
His name is Hans Platt. He has some products useful to a cnc
builder/retrofit.
On Jun 26, 2013 12:44 PM, TJoseph Powderly tjt...@gmail.com wrote:
On 06/26/2013 12:19 PM, Stuart Stevenson wrote:
---snip ---
A man that used
to develop and install MDSI's OpenCNC lives there.
--end snip --
On Wed, 26 Jun 2013 12:00:57 -0400
Ed Nisley ed.08.nis...@pobox.com wrote:
On 06/26/2013 12:06 AM, Matt Shaver wrote:
When the 3D folks discover that they need offsets or homing, or any
of the other features of linuxcnc, we'll be there to help.
That's what I plan to demonstrate: get the
Bear in mind that if you separate the GUI from Linuxcnc, you can start to
do things like:
http://arstechnica.com/information-technology/2013/06/windows-8-1-offers-native-drivers-for-3d-printers/
On Wed, Jun 26, 2013 at 12:06 PM, Matt Shaver m...@mattshaver.com wrote:
On Wed, 26 Jun 2013
On Wed, 26 Jun 2013, Belli Button wrote:
Date: Wed, 26 Jun 2013 16:00:33 +0200
From: Belli Button be...@iafrica.com
Reply-To: Enhanced Machine Controller (EMC)
emc-users@lists.sourceforge.net
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Subject: [Emc-users] Max
On 06/26/2013 12:58 PM, Stuart Stevenson wrote:
His name is Hans Platt. He has some products useful to a cnc
builder/retrofit.
thats the guy, i worked with him at RDS in Broken Arrow
thx!
--
This SF.net email is
Fascinating discussion!
I suspect that there is no room to do this, but two techniques come to mind
that I think are worth mentioning.
One is to project the chandelier onto a projection screen - for a
sufficiently fast motion, it might be sufficiently convincing even when
projected flat. The
Good Day All,
I have a mazak M3 NC lathe,that I hope to convert
to linux cnc control, and need some information or direction to enable the 16
speed gear change to operate under linux.
Regards john
On Wed, 6/26/13, Eric Keller eekel...@psu.edu wrote:
Subject: Re: [Emc-users] Why doesn't LinuxCNC run? Error log attached.
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Wednesday, June 26, 2013, 7:56 AM
On Wed, Jun 26, 2013 at 5:58 AM, Mark
Wendt
On Wed, 6/26/13, Stuart Stevenson stus...@gmail.com wrote:
Subject: Re: [Emc-users] OT, Programable winch design, need help
To: Enhanced Machine Controller (EMC) emc-users@lists.sourceforge.net
Date: Wednesday, June 26, 2013, 8:26 AM
I thinking hologram. Then the crash
would appear real
52 matches
Mail list logo