On Fri, 16 Aug 2019, Les Newell wrote:
Date: Fri, 16 Aug 2019 17:18:01 +0100
From: Les Newell
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Homing following error (was PID feed forward)
I think it is same issue as you. I'm still
or
(scope2.png,halscope2.zip,scope2.txt).
Thanks,
Frank
-----Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Sent: Saturday, 17 August 2019 3:16 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Homing following error (was PID feed forward)
On Fri, 16 Aug 2019
On Sat, 17 Aug 2019, Les Newell wrote:
Date: Sat, 17 Aug 2019 16:30:12 +0100
From: Les Newell
To: Peter C. Wallace
Subject: Re: [Emc-users] Homing following error (was PID feed forward)
Hi Peter,
Yes, it tripped a following error fault. I have attached a plot showing the
following error
source
On 17/08/2019 16:52, Peter C. Wallace wrote:
Ack! I thought this might be a simple PID related problem but it looks
like a error introduced to motion (by joints-axis?) The joint command
follows the joint feedback at the step on index but the ferror
calculation seems like its not in the co
On Sat, 17 Aug 2019, John Dammeyer wrote:
Date: Sat, 17 Aug 2019 14:15:14 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Alright.
Installed the newest LiveCD Stretch version repla
On Tue, 20 Aug 2019, John Dammeyer wrote:
Date: Tue, 20 Aug 2019 12:47:12 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Asking again.
The only web link I found on this subject i
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 15:18:25 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Thanks Peter,
I've got pulses coming out the Spindle Pins o
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 17:16:50 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
In case anyone is interested:
%
G0 X0.000
G0 X0.001
%
Sta
This didn't make any difference. What does fix it is disabling BACKLASH.
And that led me to the STEPGEN_MAXACCEL set too low. Initial testing didn't
have backlash enabled so the 25% increase in STEPGEN_MAXACCEL was more than
adequate. But with backlash enabled it broke. Should really
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 18:51:34 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
And although DIRSETUP in the ini file is set to 1000 nS th
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 19:01:35 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
originally created by pncconfig. Should not
>>> setp h
of adding the non-open source
driver package
Might be easier to find a supported WIFI adapter (I'm using some $8.00 edimax
thing here thats trouble free and has built in support)
Or find a low profile PCI Ethernet card
John
-----Original Message-
From: Peter C. Wallace [mailto:p...@m
On Wed, 21 Aug 2019, John Dammeyer wrote:
Date: Wed, 21 Aug 2019 23:12:34 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Hi Tom,
Alas. No. Still not found.
I could probably sudo ap
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 13:36:35 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Pin files for 5i25
Hi all
I need to set a 5i25 up as a dual lpt port. I
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 20:25:53 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On 8/27/2019 1:36 PM, Marius Liebenberg wrote:
Hi all
On Tue, 27 Aug 2019, Marius Liebenberg wrote:
Date: Tue, 27 Aug 2019 21:17:19 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On 8/27/2019 8:48 PM, Marius Liebenberg wrote:
On
http://freeby.mesanet.com/5i25_7i76_5abob.bit
7I76 on P3, Cheap Ebay "5 Axis" BOB on P2
Peter Wallace
Mesa Electronics
(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.
___
Emc-users
Now a new problem or not so much a problem but I can't figure out how to fix it
and it's probably right in front of my nose.
The Z axis is a knee, not a quill and on the 7i92H the knee is now going in the
wrong direction. On the para
On Wed, 28 Aug 2019, John Dammeyer wrote:
Date: Wed, 28 Aug 2019 19:22:09 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
Gene,
You've got it backwards. The parallel port version
On Wed, 28 Aug 2019, John Dammeyer wrote:
Date: Wed, 28 Aug 2019 21:05:58 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Saga
This what the halcmd produced for the Y axis.
28 bit
On Thu, 29 Aug 2019, Gene Heskett wrote:
Date: Thu, 29 Aug 2019 12:55:31 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Pin files for 5i25
On Thursday 29 August 2019 08:40:03 Todd Zuercher wrote:
-O
Yes, you can see page 2 of the 5I25 manual:
W1 (P2 POWER ) W2 (P3 POWER)
UP UP BREAKOUT POWER ENABLED
DOWN DOWN BREAKOUT POWER DISABLED (DEFAULT)
Note that you also need to set the 7I76/7I76D in the correct mode:
W2 left = gets 5V powe
On Sat, 31 Aug 2019, Marius Liebenberg wrote:
Date: Sat, 31 Aug 2019 12:50:32 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Compiling mesa bit files
Hi All,
I am trying my hand at getting my own m
On Tue, 3 Sep 2019, Marius Liebenberg wrote:
Date: Tue, 3 Sep 2019 10:04:51 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Error compiling Mesa bit file for 7i76E
Hi All
With a lot of help from Pet
On Wed, 4 Sep 2019, Marius Liebenberg wrote:
Date: Wed, 4 Sep 2019 21:03:10 +0200
From: Marius Liebenberg
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Mesa PIN file description
Hi all
Does anyone know of a document or a descr
On Sun, 8 Sep 2019, andy pugh wrote:
Date: Sun, 8 Sep 2019 10:50:54 +0100
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Step timing and max velocity
On Sun, 8 Sep 2019 at 04:41, andrew beck wrote:
I can mo
On Sun, 8 Sep 2019, Gene Heskett wrote:
Date: Sun, 8 Sep 2019 11:44:23 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Step timing and max velocity
On Sunday 08 September 2019 06:55:58 Peter
On Mon, 9 Sep 2019, andrew beck wrote:
Date: Mon, 9 Sep 2019 21:38:49 +1200
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Step timing and max velocity
Hey Andypugh and PCW.
PCW
I will attach my Ini files
On Thu, 19 Sep 2019, John Dammeyer wrote:
Date: Thu, 19 Sep 2019 23:01:01 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
I've been bread boarding some circuits and mulling over th
----Original Message-
From: Peter C. Wallace [mailto:p...@mesanet.com]
Sent: September-20-19 6:57 AM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] MESA 7i92H Power
On Thu, 19 Sep 2019, John Dammeyer wrote:
Date: Thu, 19 Sep 2019 23:01:01 -0700
From: John Dammeyer
Reply-To: &qu
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 09:22:39 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
Hi Andy,
-Original Message-
From: andy pugh [m
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 09:24:52 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
Peter,
Actually I have found that its better in general
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 11:08:51 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
Perhaps I'm really just missing something obvious here.
On Fri, 20 Sep 2019, John Dammeyer wrote:
Date: Fri, 20 Sep 2019 12:47:53 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H Power
And Peter, you stated previously that it's more versatile
On Thu, 3 Oct 2019, Gene Heskett wrote:
Date: Thu, 3 Oct 2019 10:08:00 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Real-Time Linux on the Raspberry Pi
On Thursday 03 October 2019 08:25:10 Thomas J Powd
On Thu, 3 Oct 2019, Gene Heskett wrote:
Date: Thu, 3 Oct 2019 10:38:51 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Real-Time Linux on the Raspberry Pi
On Thursday 03 October 2019 10:17:
On Sun, 6 Oct 2019, Dave Matthews wrote:
Date: Sun, 6 Oct 2019 16:04:49 -0400
From: Dave Matthews
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Mesa cards for a CNC router
I am thinking about changing my Gatton CNC over from a
On Thu, 24 Oct 2019, Gene Heskett wrote:
Date: Thu, 24 Oct 2019 21:44:36 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] hal syntax maybe?
Greetings all;
I have added two pwmgen's to the config strings o
On Sun, 3 Nov 2019, John Dammeyer wrote:
Date: Sun, 3 Nov 2019 08:22:44 -0800
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] MESA 7i92H changes
Currently my MESA 792H is configured with DB25-14 and DB25-161
On Thu, 5 Dec 2019, Gene Heskett wrote:
Date: Thu, 5 Dec 2019 16:14:57 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] parallel port picie cards
On Thursday 05 December 2019 15:01:25 Bruce Layne wrote:
On Tue, 10 Dec 2019, Gene Heskett wrote:
Date: Tue, 10 Dec 2019 06:46:16 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Need a power signal independent of linuxcnc.
On Monday 09 December 2019 22:45:26 Gen
9 10:16:16 Peter C. Wallace wrote:
On Tue, 10 Dec 2019, Gene Heskett wrote:
Date: Tue, 10 Dec 2019 06:46:16 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Need a power signal independent of
lin
9 11:52:06 Peter C. Wallace wrote:
On Tue, 10 Dec 2019, Gene Heskett wrote:
Date: Tue, 10 Dec 2019 11:18:11 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Need a power signal independent of
linu
I did a quick test to see if I could confuse a 7I76 by sending it
garbage/interrupted transmissions (cycling the FPGA side power while doing high
speed comms. I did this 500 times without the 7i76 I/O processor ever requiring
a power cycle to recover. I still think this is some other issue (powe
c.
630 Henry Street
Dalton, Ohio 44618
Phone: (330)828-2105ext. 2031
-Original Message-
From: Peter C. Wallace
Sent: Tuesday, December 10, 2019 4:28 PM
To: Enhanced Machine Controller (EMC)
Subject: Re: [Emc-users] Need a
power signal independent of linuxcnc.
I did a quick t
On Sun, 15 Dec 2019, Leonardo Marsaglia wrote:
Date: Sun, 15 Dec 2019 22:45:23 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
By the way, I'm using the 6i24-25 board a
On Sun, 15 Dec 2019, Leonardo Marsaglia wrote:
Date: Sun, 15 Dec 2019 23:27:16 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
Hello John,
I don't know If I understan
On Mon, 16 Dec 2019, Gene Heskett wrote:
Date: Mon, 16 Dec 2019 12:24:56 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
On Monday 16 December 2019 11:14:02 andy pugh wrote:
On
On Mon, 16 Dec 2019, Gene Heskett wrote:
Date: Mon, 16 Dec 2019 12:24:56 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
On Monday 16 December 2019 11:14:02 andy pugh wrote:
On
On Tue, 17 Dec 2019, andy pugh wrote:
Date: Tue, 17 Dec 2019 11:32:22 +
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Latency Warning Messages
On Mon, 16 Dec 2019 at 23:42, John Dammeyer wrote:
For ex
On Wed, 18 Dec 2019, Leonardo Marsaglia wrote:
Date: Wed, 18 Dec 2019 09:01:50 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
Thanks Andy.
I have doubts about the p
On Wed, 18 Dec 2019, Leonardo Marsaglia wrote:
Date: Wed, 18 Dec 2019 17:16:15 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
1. what size FPGA do you have (-16 or -2
On Sun, 29 Dec 2019, andrew beck wrote:
Date: Sun, 29 Dec 2019 23:19:20 +1300
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] looking for advice on best wiring practices and
grounding on cnc mills
SNIP-
On Fri, 3 Jan 2020, Gene Heskett wrote:
Date: Fri, 3 Jan 2020 09:41:26 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Somewhat of a puzzler with a 7i76D
On Thursday 02 January 2020 15:59:09 Gene Heskett w
On Mon, 13 Jan 2020, andy pugh wrote:
Date: Mon, 13 Jan 2020 10:27:58 +
From: andy pugh
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] MESA 7i92H Power
On Mon, 13 Jan 2020 at 05:18, John Dammeyer wrote:
I have LinuxC
On Tue, 14 Jan 2020, Brent Loschen wrote:
Date: Tue, 14 Jan 2020 20:06:36 -0700
From: Brent Loschen
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] help with spindle speed
Almost a year ago I converted my servo'd Bridgeport/Boss
On Sat, 18 Jan 2020, Gene Heskett wrote:
Date: Sat, 18 Jan 2020 15:58:23 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] I'm back to a sseriel failure that can only be fixed
with a full powerdown of the
On Thu, 23 Jan 2020, Chris Albertson wrote:
Date: Thu, 23 Jan 2020 10:17:44 -0800
From: Chris Albertson
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Real-time OS for machine controllers
The trouble with the Mesa FPGA desig
On Fri, 24 Jan 2020, Brent Loschen wrote:
Date: Fri, 24 Jan 2020 14:00:06 -0700
From: Brent Loschen
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Question regarding power requirements for 7i76 Spindle+
and Spindle-
I curre
On Sun, 26 Jan 2020, Gene Heskett wrote:
Date: Sun, 26 Jan 2020 03:33:29 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Real-time OS for machine controllers
On Sunday 26 January 2020 02:57:28 Andy Pugh wr
On Mon, 27 Jan 2020, John Dammeyer wrote:
Date: Mon, 27 Jan 2020 12:27:31 -0800
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: [Emc-users] MESA 7i92H hiccup
Hi everyone,
Been working on my Spindle Control with the adap
My first guess would be a damaged I/O pin on the 7I92H (so marginal levels)
BTW, a good way to check for I/O pin damage is to check the input protection
diodes with an Ohmmeters diode check function (positive lead to ground, negative
lead to I/O line)
All lines should show a consistent ~0
On Mon, 27 Jan 2020, John Dammeyer wrote:
Date: Mon, 27 Jan 2020 14:02:12 -0800
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] MESA 7i92H hiccup
So I guess two questions.
1. If it happens again what ty
On Sat, 15 Feb 2020, dave engvall wrote:
Date: Sat, 15 Feb 2020 12:45:26 -0800
From: dave engvall
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] just call me grumpy! (7i43)
Hi all,
A quick look at web sources seems to indicate
On Mon, 17 Feb 2020, John Dammeyer wrote:
SNIP--
I think partly I don't understand the difference between the current LinuxCNC
and the MachineKit LinuxCNC. What does make them so different that a newer
version of LinuxCNC with bugs remov
On Tue, 18 Feb 2020, Ed W wrote:
Date: Tue, 18 Feb 2020 22:48:08 +
From: Ed W
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] How to get 6i25 functioning?
Hi, new user with a 6i25 trying to get off the ground floor. I've loaded
f
On Wed, 19 Feb 2020, Ed W wrote:
Date: Wed, 19 Feb 2020 00:24:55 +
From: Ed W
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] How to get 6i25 functioning?
On 18/02/2020 23:23, Peter C. Wallace wrote:
On Tue, 18 Fe
On Thu, 20 Feb 2020, Gene Heskett wrote:
Date: Thu, 20 Feb 2020 18:09:07 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] Back to confusing puzzles.
Greetings all;
I have added a 40 amp SSR in the relay box wi
On Thu, 20 Feb 2020, Gene Heskett wrote:
Date: Thu, 20 Feb 2020 19:47:32 -0500
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] Back to confusing puzzles.
On Thursday 20 February 2020 18:55:59 Peter
On Wed, 26 Feb 2020, Ed W wrote:
Date: Wed, 26 Feb 2020 17:58:09 +
From: Ed W
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Making progress
Hi, I've made good progress converting my little OmioCNC X6 from Mach3
to LinuxCNC
On Sat, 7 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 7 Mar 2020 10:20:52 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
Hello again to all,
I'm reviving this di
placed on the bottom plate next to the motherboard. On the top plate I'm
mounting also the 7i70 and 7i71. So to reach the 7i52s the best for me is
to use the P1 connector. I should have thought about this before anyway...
El s??b., 7 mar. 2020 a las 12:48, Peter C. Wallace ()
escribi??:
On S
ou have?
6i24-25
http://freeby.mesanet.com/5i24_25r.zip
El s??b., 7 mar. 2020 a las 13:20, Peter C. Wallace ()
escribi??:
On Sat, 7 Mar 2020, Leonardo Marsaglia wrote:
> Date: Sat, 7 Mar 2020 13:02:11 -0300
> From: Leonardo Marsaglia
> Reply-To: "Enhanced Machine Contro
ays.
I've checked the voltages and they seem ok. I'm feeding the 7i70 with 12
volts and since I'm testing I'm connecting FIELD POWER to VIN.
Do you know what can cause this?
El s??b., 7 mar. 2020 a las 14:00, Peter C. Wallace ()
escribi??:
On Sat, 7 Mar 2020, Leonardo M
On Sat, 7 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 7 Mar 2020 21:45:21 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
Thank you very much Peter!
I succeeded m
On Sat, 7 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 7 Mar 2020 23:26:17 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
For now I'm using it via halcmd.
I had rea
On Sat, 7 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 7 Mar 2020 23:34:28 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
By the way, I'm feeding the field power of
On Sun, 8 Mar 2020, Sam Sokolik wrote:
Date: Sun, 8 Mar 2020 23:43:30 -0500
From: Sam Sokolik
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Non-circular boring. Linuxcnc style.
The polygon Hal component can be enabled/disab
On Thu, 12 Mar 2020, Leonardo Marsaglia wrote:
Date: Thu, 12 Mar 2020 15:31:38 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
Well I'm suspecting this could be a firmw
On Thu, 12 Mar 2020, Gene Heskett wrote:
Date: Thu, 12 Mar 2020 14:52:47 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] 6i24 + 7i44 configuration
On Thursday 12 March 2020 12:23:06 Leonardo Marsaglia wrot
. Could it be
a firmware issue?
Yes please run
sudo mesaflash --device 6i24 --readhmid > pins.txt
and post the results here
El jue., 12 mar. 2020 a las 16:17, Peter C. Wallace ()
escribi??:
On Thu, 12 Mar 2020, Gene Heskett wrote:
> Date: Thu, 12 Mar 2020 14:52:47 -0400
> From: Gene
, 12 mar. 2020 a las 16:40, Peter C. Wallace ()
escribi??:
So the enables for the first 7I52S are GPIO48 and GPIO
On Thu, 12 Mar 2020, Leonardo Marsaglia wrote:
Date: Thu, 12 Mar 2020 16:28:56 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To
On Sat, 14 Mar 2020, Andrew wrote:
Date: Sat, 14 Mar 2020 18:24:25 +0200
From: Andrew
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Mesa boards for RPi 4
Hello!
I need to control a small machine with 3 Copley Controls Junus dr
On Sun, 15 Mar 2020, Rafael Skodlar wrote:
"... The outputs are push pull CMOS that will drive to the output
supply rail of 3.3V. This is sufficient for TTL compatibility but may
cause problems with some types of loads. For example when driving
an LED that has its anode connected
On Thu, 19 Mar 2020, Gene Heskett wrote:
Date: Thu, 19 Mar 2020 05:48:08 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] crazy, but Peter, its still a wurlitzer
On Wednesday 18 March 2020 22:56:31 Gene Hes
On Thu, 19 Mar 2020, Gene Heskett wrote:
Date: Thu, 19 Mar 2020 06:43:47 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] limits of encoder monitoring question for Peter
Greetings Peter C.W.
One of the th
On Thu, 19 Mar 2020, Gene Heskett wrote:
Date: Thu, 19 Mar 2020 17:02:59 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: [Emc-users] A hal question?
Greetings; I am trying to reduce the f/r error in an ATS667 based
encode
On Thu, 19 Mar 2020, Gene Heskett wrote:
Date: Thu, 19 Mar 2020 18:41:42 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] A hal question?
On Thursday 19 March 2020 17:27:55 Peter C. Wallace wrote
On Thu, 19 Mar 2020, Gene Heskett wrote:
Date: Thu, 19 Mar 2020 21:33:22 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] A hal question?
On Thursday 19 March 2020 19:03:27 Peter C. Wallace wrote
On Thu, 19 Mar 2020, John Dammeyer wrote:
Date: Thu, 19 Mar 2020 20:08:52 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] A hal question?
-Original Message-
From: Jon Elson [mailto:el...@
On Thu, 19 Mar 2020, Gene Heskett wrote:
Date: Thu, 19 Mar 2020 21:55:55 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] A hal question?
On Thursday 19 March 2020 19:12:37 Jon Elson wrote:
On 03/19/2020
Sorry thats:
sudo mesaflash --device 7i90 --spi --addr [spi device name] --readhmid
mesaflash --help for usage info
Peter Wallace
Mesa Electronics
___
Emc-users mailing list
Emc-users@lists.sourceforge.net
https://lists.sourceforge.net/lists/listinf
On Fri, 20 Mar 2020, Gene Heskett wrote:
Date: Fri, 20 Mar 2020 10:20:51 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] A hal question?
On Friday 20 March 2020 09:14:08 Peter C. Wallace wrote
On Fri, 20 Mar 2020, Gene Heskett wrote:
Date: Fri, 20 Mar 2020 11:21:55 -0400
From: Gene Heskett
Reply-To: "Enhanced Machine Controller (EMC)"
To: emc-users@lists.sourceforge.net
Subject: Re: [Emc-users] A hal question?
On Friday 20 March 2020 09:21:33 Peter C. Wallace wrot
On Fri, 20 Mar 2020, John Dammeyer wrote:
Date: Fri, 20 Mar 2020 09:12:06 -0700
From: John Dammeyer
Reply-To: "Enhanced Machine Controller (EMC)"
To: "'Enhanced Machine Controller (EMC)'"
Subject: Re: [Emc-users] A hal question?
But what happens when someone has a 2500 line encoder on
On Sat, 21 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 21 Mar 2020 00:48:46 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] Question about index pulse on high resolution encoder
Hello guys,
I'm
On Sat, 21 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 21 Mar 2020 01:21:16 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Question about index pulse on high resolution encoder
Hello John,
On Sat, 21 Mar 2020, Leonardo Marsaglia wrote:
Date: Sat, 21 Mar 2020 01:27:52 -0300
From: Leonardo Marsaglia
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: Re: [Emc-users] Question about index pulse on high resolution encoder
I just set in
On Mon, 23 Mar 2020, andrew beck wrote:
Date: Mon, 23 Mar 2020 17:32:56 +1300
From: andrew beck
Reply-To: "Enhanced Machine Controller (EMC)"
To: "Enhanced Machine Controller (EMC)"
Subject: [Emc-users] connecting up mpg
Hey guys.
I have a 12 volt mpg
I want to connect it to the 7i76 b
so this needs to be done by editing the
HAL file
New Zealand is going in to total isolation for a month from tomorrow
because of covid 19 so I have some time for this lol :)
Regards
Andrew
Regards
Andrew
On Mar 24, 2020 3:18 AM, "Peter C. Wallace" wrote:
On Mon, 23 Mar 2020,
101 - 200 of 1966 matches
Mail list logo
