On 10 November 2012 02:43, Erik Friesen e...@aercon.net wrote:
I simply do not get this. How does -100 200 0.5 represent an area in
a 10x10 workarea?
I would be astonished if Michael uses a non-metric machine, so those
are going to be mm positions.
I don't know why he said 10in x 10in.
--
, November 7, 2012 3:34 PM
Subject: Re: [Emc-users] Text on rounded button.
On Wednesday 07 November 2012 16:30:47 Jack Coats did opine:
www.vectric.com
Thanks for the momentary shortness of breath, that $2G price tag could be
dangerous to this old farts well being. Being 78 is NOT for wimps
On Tue, Nov 6, 2012 at 3:49 PM, Erik Friesen e...@aercon.net wrote:
I am doing the compile from the emc2-dev/src directory. I can't find where
liblinuxcnchal.so is referenced, so I am unclear how to proceed. I can't
find it in the probekins project either.
Hmmm, it needs to see the
On 7 November 2012 03:00, Erik Friesen e...@aercon.net wrote:
Even after building the dev install, I don't find any stlvis script.
I am not sure you need it. (but see the Dependencies section of that
Wiki page)
It should just be a case of specifying probekins in the HAL, then
loading an STL
I pulled the source I am using about 9 months ago. I then modified it to
allow saving more registers in the 4000+ range to allow the 3d preview to
work with some custom gcode multiplier code. I also am using gladevcp. I
think these depend on 2.6? or is it 2.5? It looks like probekins is 2.5
On 7 November 2012 13:08, Erik Friesen e...@aercon.net wrote:
It looks like probekins is 2.5 based. The problem is that I don't feel like
spending a week digging down
here, we'll see.
Using probekins _should_ just need the probekins.c file (compiled and
installed, hopefully with comp) and
Hi,
I am trying the PyCam, it loaded an stl. Then I created text, the stl
disappeared. So I reloaded the stl, then the text is gone. I must be
missing some basics.
yes - sorry - this detail was hidden in the article :)
The last release of PyCAM could only handle one model at a time -
Ok, I saw that , and have been trying. I want to run it on my windows
machine, and I am not having any luck getting it going. I installed the
prereqs, and used git, but not sure from there.
On Wed, Nov 7, 2012 at 11:56 AM, Lars Kruse li...@sumpfralle.de wrote:
Hi,
I am trying the PyCam,
just funnin here but i think i see an issue
I want to run it on my windows
machine,
pleas laugh :)
also let us know if you succeed i may want to do the same ;)
--
jeremy youngs
--
LogMeIn Central: Instant, anywhere,
On Wednesday 07 November 2012 14:51:47 Lars Kruse did opine:
Hi,
I am trying the PyCam, it loaded an stl. Then I created text, the stl
disappeared. So I reloaded the stl, then the text is gone. I must
be missing some basics.
yes - sorry - this detail was hidden in the article :)
www.vectric.com
Has 'aspire' software that I think could handle the problem of writing
engraved or raised lettering on curved or dome style surfaces.
No it is not open or free software, but it is pretty amazing even at
it's 'steep' price.
I just wish my artistic talents were up to software I can
Yeah, aspire would be nice, but I can't afford non free on this project, I
would have to cough up $1500 more for aspire. I think for now I am going
to put text on the overlay, this is too much work for this project. I am
building a sound interface for our new church sound system.
On Wed, Nov
On Wednesday 07 November 2012 16:30:47 Jack Coats did opine:
www.vectric.com
Thanks for the momentary shortness of breath, that $2G price tag could be
dangerous to this old farts well being. Being 78 is NOT for wimps. ;-)
Besides that, there is likely another hidden cost, it only runs on the
growth can go on forever in a finite world is
either a madman or an economist.
-Kenneth Boulding, economist
From: Gene Heskett ghesk...@wdtv.com
To: emc-users@lists.sourceforge.net
Sent: Wednesday, November 7, 2012 3:34 PM
Subject: Re: [Emc-users] Text
On Tue, Nov 6, 2012 at 2:06 AM, Erik Friesen e...@aercon.net wrote:
Any ideas how to get code to put text on this round button?
http://www.digikey.com/product-detail/en/1WD16/679-2144-ND/2034700
If a true spherical surface then a 5 axis machine with A and B being
driven as X,Y
with some
On 6 November 2012 02:06, Erik Friesen e...@aercon.net wrote:
Any ideas how to get code to put text on this round button?
Probe the surface and use
http://wiki.linuxcnc.org/cgi-bin/wiki.pl?ProbeKins
(the probing step is optional if you can manually create the height
map, which could be done by
I don't quite follow this probekins thing, although that seems promising.
Is it a matter of exporting an stl from my cad with the same zero point as
I intend to use, as well as in the same axis?
On Tue, Nov 6, 2012 at 5:21 AM, andy pugh bodge...@gmail.com wrote:
On 6 November 2012 02:06, Erik
On Mon, 2012-11-05 at 22:47 -0800, Kirk Wallace wrote:
On Mon, 2012-11-05 at 21:06 -0500, Erik Friesen wrote:
Any ideas how to get code to put text on this round button?
http://www.digikey.com/product-detail/en/1WD16/679-2144-ND/2034700
The software I currently have is, alibre pro(no
On 6 November 2012 15:20, Erik Friesen e...@aercon.net wrote:
I don't quite follow this probekins thing, although that seems promising.
Is it a matter of exporting an stl from my cad with the same zero point as
I intend to use, as well as in the same axis?
Basically, yes. The STL is a
If you mean engrave the top surface of the button, you can use a diamond drag
engraving tool, because it will follow the curves. You can use VCarve Pro to
generate the code as if it was for a flat surface.
Marcus
On 6 Nov 2012, at 16:22, andy pugh wrote:
On 6 November 2012 15:20, Erik
I see the probekins tar.gz includes everything. I have my customized
version of linuxcnc running, don't feel like using something else. Is it
just a matter of dragging some of the files into my src and building?
On Tue, Nov 6, 2012 at 12:12 PM, Marcus Bowman marcus.thebowm...@virgin.net
I copied the kinematics directory to mine, here is the error in the make.
Any ideas what I need to do?
Compiling emc/kinematics/genserkins.c
make: *** No rule to make target `../lib/liblinuxcnchal.so', needed by
`../bin/genserkins'. Stop.
On Tue, Nov 6, 2012 at 2:42 PM, Erik Friesen
On Tue, Nov 6, 2012 at 3:41 PM, Erik Friesen e...@aercon.net wrote:
I copied the kinematics directory to mine, here is the error in the make.
Any ideas what I need to do?
Compiling emc/kinematics/genserkins.c
make: *** No rule to make target `../lib/liblinuxcnchal.so', needed by
I am doing the compile from the emc2-dev/src directory. I can't find where
liblinuxcnchal.so is referenced, so I am unclear how to proceed. I can't
find it in the probekins project either.
On Tue, Nov 6, 2012 at 3:47 PM, Mark Wendt wendt.m...@gmail.com wrote:
On Tue, Nov 6, 2012 at 3:41 PM,
or, probekins source.
On Tue, Nov 6, 2012 at 3:49 PM, Erik Friesen e...@aercon.net wrote:
I am doing the compile from the emc2-dev/src directory. I can't find
where liblinuxcnchal.so is referenced, so I am unclear how to proceed. I
can't find it in the probekins project either.
On Tue,
On 6 November 2012 19:42, Erik Friesen e...@aercon.net wrote:
I see the probekins tar.gz includes everything. I have my customized
version of linuxcnc running, don't feel like using something else. Is it
just a matter of dragging some of the files into my src and building?
It might actually
I am building with 2.6.0 ~pre. Something isn't working here, comp isn't
found even after dev install. Is 2.6 incompatible with the probekins
kinematics source?
On Tue, Nov 6, 2012 at 4:04 PM, andy pugh bodge...@gmail.com wrote:
On 6 November 2012 19:42, Erik Friesen e...@aercon.net wrote:
Even after building the dev install, I don't find any stlvis script.
On Tue, Nov 6, 2012 at 4:23 PM, Erik Friesen e...@aercon.net wrote:
I am building with 2.6.0 ~pre. Something isn't working here, comp isn't
found even after dev install. Is 2.6 incompatible with the probekins
kinematics
Hi,
The software I currently have is, alibre pro(no gcode), vcarve pro, and
meshcam, none of which seem capable of curved text.
did you already try PyCAM?
(disclaimer: I maintain PyCAM)
I just prepared a short article with some screenshots that show how to solve
your specific problem with
Any ideas how to get code to put text on this round button?
http://www.digikey.com/product-detail/en/1WD16/679-2144-ND/2034700
The software I currently have is, alibre pro(no gcode), vcarve pro, and
meshcam, none of which seem capable of curved text. There is just enough
depth to where I could
inkscape has a plug in i dont know if it will do curved letters or not
though. i have it but we have mastercam at work so thats what i use
On Mon, Nov 5, 2012 at 9:06 PM, Erik Friesen e...@aercon.net wrote:
Any ideas how to get code to put text on this round button?
On 6 November 2012 04:06, Erik Friesen e...@aercon.net wrote:
Any ideas how to get code to put text on this round button?
http://www.digikey.com/product-detail/en/1WD16/679-2144-ND/2034700
The software I currently have is, alibre pro(no gcode), vcarve pro, and
meshcam, none of which seem
On Mon, 2012-11-05 at 21:06 -0500, Erik Friesen wrote:
Any ideas how to get code to put text on this round button?
http://www.digikey.com/product-detail/en/1WD16/679-2144-ND/2034700
The software I currently have is, alibre pro(no gcode), vcarve pro, and
meshcam, none of which seem capable of
I have been trying to figure out how I could get a z lookup table, it
wouldn't be that hard to process the code and add in the z if it was
known. The button manufacturer provides stp files. For some reason,
alibre doesn't want to do slices of that particular stp. I'll have to look
at the
34 matches
Mail list logo