Salve a tutta la ML
Ho un problemaHW con linux Mand. 8:
Il problema è che non funziona la scheda audio integrata della ASUS CUSL2. La
scheda viene riconosciuta dal sistema (nel senso che i moduli li carica senza
errori) ma se vado per ascoltare qualcosa dice che la risorsa è occupata (da
che
Salve a tutta la ML
Ho un problemaHW con linux Mand. 8:
Il problema è che non funziona la scheda audio integrata della ASUS CUSL2. La
scheda viene riconosciuta dal sistema (nel senso che i moduli li carica senza
errori) ma se vado per ascoltare qualcosa dice che la risorsa è occupata (da
che
Salve a tutta la ML
Ho un problema con la scheda viedeo in oggetto.
Suddetta scheda ha incorporato un sintonizzatore TV che pero' viene
completamente ignorato da Linux. Il problema mi sembra di aver capito è che
il sistema è fermamente convinto che la mia sia una scheda Ati Rage 128 (che
non
Salve a tutta la ML
Ho un problema con la scheda viedeo in oggetto.
Suddetta scheda ha incorporato un sintonizzatore TV che pero' viene
completamente ignorato da Linux. Il problema mi sembra di aver capito è che
il sistema è fermamente convinto che la mia sia una scheda Ati Rage 128 (che
non
i need to get my quickcam working ASAP and i'm sure others have managed to do
so in linux. unfortunately, what i've tried so far has been unsuccessful.
but then again, i didn't find too many sites/programs for getting the
logitech quickcam working in linux.
help!
What do I have to do to get you to please remove me from
you list?
[EMAIL PROTECTED]
Jay
Mouseconfig is a text based program you run from a term: no need for a
mouse. Mousedrake is a different program .. a gui thing that may indeed
require a mouse.
Dsl.
On 08-May-2001 Eric Krout wrote:
On Tuesday 08 May 2001 9:56 am, you wrote:
On Tuesday 08 May 2001 16:42, you wrote:
not
Benjamin Sher wrote:
Dear friends:
Mozilla .9 recommended beta is finally, at long last, here. I am writing
to you from Mozilla .9's Mail. This new Mozilla .9 looks, to this
ordinary user, very impressive. I'll wait for the critical reviews.
Yours,
Benjamin
I have MDK 8.0 and 7.2
Hello:
I'm writing in regards to problems I'm having with
Shogo: MAD and Sin (both by Hyperion) using OpenGL.
I have the following system:
Linux Mandrake 8.0 Final
Kernel 2.4.3
XFree86 4.0.3
nvidia 0.9-769 drivers from nvidia.com
Hercules Prophet II (GeForce 2 GTS with 64 Megs DDR
RAM)
On Mon, 7 May 2001, Erik Günther wrote:
On Thu, 3 May 2001, Erik Günther wrote:
On Thu, 3 May 2001, Rial Juan wrote:
I also have smp; I just grabbed the src.rpm from their site, did a 'rpm
--rebuild' on it, and it works like a charm.
Could you please send that rpm to me so
In the config file:
Load glx
Load dri
Thanks; I had:
Section Module
Load dbe
I added the two items you mentioned, restarted X, Afterwards gears
still shows around 129.000 FPS.
Would it be wise to rpm -e the XFree86 items and re-install the XFree 4
again?
then of course make sure
On Wednesday 09 May 2001 07:38, you wrote:
Mouseconfig is a text based program you run from a term: no need for a
mouse. Mousedrake is a different program .. a gui thing that may indeed
require a mouse.
True - I believe mouseconfig is clever enough that, if running under X,
launches
Greetings; well, I updated my ati drivers; and now the XFree is too old
for it; I guess there is no escaping from the DRI compilation.
Actually, compilation went great, but during make install, I'm getting an
odd error. Does anyone have any ideas?
Btw, I have installed the kernel-sources
Larry Sword wrote:
Nick Thompson wrote:
Hi,
I have A Ricoh 7060A CD-RW which worked fine under 7.2. I upgraded to
8.0 using this drive to read the CDs. cdrecord --scanbus sees the drive
and HardDrake says it has two devices (ide: /dev/hdc - with unknown
vendor [Vendor does appear
Jay Farnes [EMAIL PROTECTED] wrote:
What do I have to do to get you to please remove me from you list?
=
Not much to the rest of us, seeing as there is only
one person on this list that can remove you ffrom
this list. His name is Jay Farnes. But he'll have to go
BACK
On 08 May 2001 11:10:25 -0400, [EMAIL PROTECTED] wrote:
On Tuesday 08 May 2001 9:56 am, you wrote:
On Tuesday 08 May 2001 16:42, you wrote:
not true! just use your keyboard's TAB key and the ARROW keys to
navigate, and ENTER to select a mouse.
Well, in my case, it was not
Hello all,
Since installing Mdk 8.0 I get the following error message if I run configure
or rpm --rebuild.
The error message reads:
checking host system type... configure: error: can not guess host type; you
must specify one
One of the environment variables is HOSTTYPE=i586 and adding the
Well...I finally upgraded...to 8.0 from 7.2
and I love it...great job mandrake !!!
everything went without a hitch...except one thing...
I bought a CD set from cheapbytes...
so, I assume they are the download version.
I have a Pentium 233 MMX, 64 mg Ram
Installed 8.0 on a Maxtor 20 gig HD
(dual
Installation using keyboard was a pain but I found that we can jump to
the next steps of installation using F12 key so doing severaltimes this
I made this installation working...
Yes, otherwise I would not have been able to install Mandrake.
(text mode crashes; graphical interface wont let
Hi all.
Somebody got the Apache 1.3.19 build from scracth and running
on Mdk 7.2 tools?
I try, but the daemon simply die, even lsting some clue on
the logs...
Tried with/out modules and DSO.
None worked.
Any ideas?
Thanx
--
Leonardo T.
On 08-May-01 Praedor Tempus wrote:
I would like to dump XFree86-4.0.3 that came with Mandrake 8.0 and go
back to 4.0.2
Problem is, where do I find a src.rpm for 4.0.2?
There is a src.rpm for XFree-4.0.1:
harvey.informatik.hu-berlin.de/pub/Linux/distributions/Mandrake/mandrake.o
ld/7.2
--
On Wed, 9 May 2001, Gerrit Visser wrote:
Hi Erik,
I've also got it to work without any problems: I've installed the Kernel
source from the 2nd CD (required to compile NVidia kernel module correctly).
Removed all libmesa stuff. Used the tar.gz files to compile install the
drivers modules
On Wed, May 09, 2001 at 11:53 -0400, Bartlomiej Muryn wrote:
On 08 May 2001 11:10:25 -0400, [EMAIL PROTECTED] wrote:
On Tuesday 08 May 2001 9:56 am, you wrote:
On Tuesday 08 May 2001 16:42, you wrote:
not true! just use your keyboard's TAB key and the ARROW keys to
navigate, and
Out of curiosity: is it possible to have Mandrake 8.0 install Xfree 3.3.6
instead of 4? I'm reinstalling mandrake 8 from scratch, because I
uninstalled Xfree 4, and I have spent 3 days so far, and I'm unable to get
Xfree 3.3.6 to work. Always something conflicting, and I still dont have
it
Leonardo T. de Carvalho wrote:
Hi all.
Somebody got the Apache 1.3.19 build from scracth and running
on Mdk 7.2 tools?
I try, but the daemon simply die, even lsting some clue on
the logs...
Do you mean that there is nothing in error_log, /var/log/messages, or
any
Just a big thank you to all those that helped; I now have Xfree3.3.6
running on my laptop, with hardware acceleration. After I reinstalled
Mandrake in Expert mode, it asked me which Xfree I wanted; and I proudly
chose the old one :)
I'm big BIG on astronomy, and openuniverse now works
Linus will be interviewed shortly on CNBC's PowerLunch to plug his memoires.
Pierre
At next reboot, the gears has slowed down from 300.000 FPS down to
100.000 FPS again! I just installed a few games and gcc in between those
two reboots! I dont understand what's going on. -turgut
-
Turgut Kalfaoglu: http://www.kalfaoglu.com
EgeNet Internet Services:
Hi Erik,
I've also got it to work without any problems: I've installed the Kernel
source from the 2nd CD (required to compile NVidia kernel module
correctly).
Removed all libmesa stuff. Used the tar.gz files to compile install the
drivers modules (equivalent to the rpm rebuild method).
WEll one thing that jumps out at me, and you're probably going to have a
million people tell you this, but if you're booting off of a reiserfs then you
should *not* have it as a module. I mean, what's the point in having it as a
module if you're going to be using it 100% of the time? Just compile
Sorry about first message, I pressed send by accident halfway through
writing the reply..
Hi Erik,
I've also got it to work without any problems: I've installed the Kernel
source from the 2nd CD (required to compile NVidia kernel module
correctly).
Removed all libmesa stuff. Used the tar.gz
Nathan wrote:
Jerry,
Thanks for trying to help with this, if I manage to fix this problem I'll
probably give up Windows all together.
What is your agp status? Enabled or Disabled. and agp driver says
NVIDIA
cat /proc/nv/card0 brings up the following -
NVRM Version: 1.0-769
What video card are you using?
--
//
//
/ John Kloian III Chief Technology Officer /
/ OpNIX, Inc.
I tossed out supermount a long time ago. Here's what i have in my /etc/fstab :
/dev/cdrom /mnt/cdrom iso9660 ro,nosuid,noauto,exec,user,nodev0 0
/dev/fd0 /mnt/floppy vfat sync,nosuid,noauto,user,nodev,unhide 0 0
Of course, read the man page on mount and fstab before you
Hi All
Any particulap reason why the fonts in Mandrake 8.0 are so dog ugly?
Linked to that - any one know of a method to un-ugly the fonts?
TIA
--
Gabriel Fortuna
Independent Newspapers
Information Technology - Projects Networking Division
T - +27 11 633 2833
F - +27 11
does it matter? the human eye can only distinguish flicker when FPS 30.
On Wednesday 09 May 2001 11:39 am, you wrote:
At next reboot, the gears has slowed down from 300.000 FPS down to
100.000 FPS again! I just installed a few games and gcc in between those
two reboots! I dont understand
You can run X3.3.6 with hardware acceleration, but it is a little bit more
tricky to get working than with X4.0. Xfree86.org has details on how to
set it up. I haven;t seen any mandrake tools that simplify the procedure.
--
I assure you it DOES matter. First off, gears by default runs in a small
window on your desktop. If it is only around 100 FPS at that size, then it
will be below 30 FPS fullscreen. This applies to games, which is the main
point of having the hardware acceleration (and a decent vid card).
In the console type:
XFdrake -expert
--- Turgut Kalfaoglu [EMAIL PROTECTED] wrote:
Out of curiosity: is it possible to have Mandrake
8.0 install Xfree 3.3.6
instead of 4? I'm reinstalling mandrake 8 from
scratch, because I
uninstalled Xfree 4, and I have spent 3 days so far,
and I'm
I just wanted to share this followup to Leonardo's Apache problem. Please
note the disclaimer I have at the end!
It doesn't seem to be LM specific, but rather related to Apache, since the
box I had the problem with was Debian.
Go into your apache source tree, and in the src/include
I have experienced, and continue to experience, similar problems. For full
access to all the menus/submenus, right-click almost anywhere on winamp (but
not on the playlist) and navigate thru the menus that way.
j
--- Kang-Ling Weng [EMAIL PROTECTED] wrote:
hi
I expirenced the problem that
I found it. Thanks anyway.
Ric
Ric Tibbetts wrote:
All;
I used to have a fully graphical Lilo. The selection menu was on the right,
and you scroll through it. And it was deffinately graphical (not the colored
ascii menu).
Now, it has stopped working for some strange reason. I
We really need more information about your setup, but
assuming you are using KDE (the default) you can try
the following:
In KDE Control Center click LookNFeel-Style. Click
the checkbox to enable Anti-aliasing. Click Font (on
the left again). Here you can set up the fonts that
you prefer.
In
I solved it; actually, you guys solved it. The 'XFdrake -expert'
command did the trick; I chose the hw accelerated 3.3.6 again, and the
next time I started X, I had my FPS way up again!
Thanks a lot, -turgut
-
Turgut Kalfaoglu: http://www.kalfaoglu.com
EgeNet Internet Services:
At the start, I'd appreciate it if anyone responding would copy my email
address. I somehow got dropped from the list about a month ago and for
some reason have been unable to re-subscribe (or else my employer is
filtering email from mandrake somehow).
I have installed Mdk8 (from .iso) on two
How does one delete a print job under cups? I have used lprm, the cups
html interface etc but whilst they delete the print job, the data from
the current job keeps coming! One even says print job deleted, sending
xxx bytes to printer! Needless to say this is a real pain on large
documents one
Poor me - 19-22 fps in window, 3 fps full screen - bloody sis video chip
and shared memory ...
will have to see if dri etc is supported now but wasnt last time I
checked.
BillK
Praedor Tempus wrote:
I assure you it DOES matter. First off, gears by default runs in a small
window on your
All
I have an interesting conflict with my mouse, kudzu.
It's a standard Logitech 3 button PS/2 Mouse. Nothing fancy. LM 8.0 kudzu have
teamed up to make me miserable.
Every time I boot, kudzu changes the state of the mouse. If it's connected
happy, kudzu will claim that the mouse has been
I'm about to take the 5th of 5 final exams I had scheduled the past week.
*So* not fair (especially since many of the artsy students had 0 finals to
take).
Bitchingly yours,
Eric
Eric Krout
Email: [EMAIL PROTECTED]
Web:
On Tuesday 08 May 2001 14:55, you wrote:
I would like to dump XFree86-4.0.3 that came with Mandrake 8.0 and go back
to 4.0.2 because the latter worked with the various native linux games I
have while the former breaks every single one of them.
Problem is, where do I find a src.rpm for 4.0.2?
It might be possible that the pages continuing to print are those that have
already been sent to the printer. A home inkjet (Epson 660) seems to hold
about half a page in its own internal memory - so if I cancel a job after it
has started printing, it usually has about another half page to print
Ric,
I recently had a similar problem with my new IBM PS/2 2 button mouse, and
Kudzu occasionally behaved weird with my previous M$ 2 button serial
mouse. I eventually gave up on Kudzu and ran mouseconfig from a terminal.
This at least saw the mouse, but still no mouse action. After checking
the
No, its not the printer buffer - its actually cups still downloading the
data until the end of the file. I you have 100 pages of complex graphics -
a very large file, it still insists on downloading the lot! I am not at
the machine at the moment, but on the jobs html page, it actually shows
as
hi
I expirenced the problem that I can't use my mouse in some submenues in
xmms.
for example in :
options/preferences
options/skin browser
also under the playlist I can't use my mouse at +DF
but I can use my mouse to select file at +File
any solutions for this problem?
Dear friends:
Using Mandrake 8.0 with KDE 2.1.1
For some reason, my screensaver doesn't work. I have set it up for 30
minutes and selected the screensaver in KDE's Control Center, Look n
Feel (the hop screensaver), but instead of getting the screensaver, I
get a black screen. Every time. Never
55 matches
Mail list logo
