Hello expert-it,
subscribe aqil
--
Best regards,
mailto:[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
At 10.28 17/11/2001 +0100, you wrote:
Come mai hai configurato tutto a mano invece di usare un dialer come
KPPP, wvdial (e gtkdial)? Funzionano piu' che bene.
Veramente ho cominciato con kppp, ma visto che non funzionava ho provato ad
affrontare il problema dalla radice...
Ciao
Ciao
We're running a web server, hosting several hundred virtualhosts, most of
whom use PHP. Since there is so much use of PHP, I've compiled it into
Apache, rather than as a loadable module.
Rather frequently, it seems that a httpd process (we've tracked it
happening) will go rogue and
The new computer I just bought has Windows XP. I'd like to
re-partition my (20 GB) hard disk keeping most it for Mandrake 8.1.
Does the disk re-partitioning software that comes with Mandrake 8.1
work with a disk originally formatted for Windows XP?
Note: Partition Magic has a new version 7 for
Hi,
I am using a MDK 8.0 on an Intel Celeron with 128M RAM and most things are
working very well except for one problem, which is very troubling at times.
I simply cannot read a CD-R disk properly, whenever I copy something from a
CD-R to the hard disc the program exits with a message like Could
The connection are ok , is the autodetection not working properly
forcing 10base2 with diagnostic under dos
it works properly
Pierfrancesco
kons Richard Bown wrote:
On many dual port ethernet cards, the rj45 is enabled automatically if
the BNC port is not terminated with 50 ohm
Hello kons,
If your server support, you can use :
dele 1 - 204 (try also not use space)
or on windows, usually i use this program :
http://www.fantastica.com/digilex/cmail.html
otherwise, make a perl program, telnet to the pop3
and loop from 1 to 240 and delete the number.
--
Thanks Pipit, the problem sorted it self out when the link was restored, with a
download of over 500 mails.
Just deleted at my end..
Thanks anyway
Regards richard
-Original Message-
From: Pipit [mailto:[EMAIL PROTECTED]]
Sent:
Hi
Make sure, that the kernel PCMCIA support is not compiled into the
distro version, because
it is not working.
So if that is the case, recompile the kernel with all the kernel-pcmcia
options disabled, configure
the pcmcia package, and it will hopefully recognize your devices
Balazs Meszaros
Hi there,
I've just installed Mandrake 8.1 and discovered that the password length is
only 8 characters, thath means that if you set your password, for example as
pass12345678, the system will authorize you if you type pass1234, or
pass1234-BLA-BLA.
There is shadowing on the system, i think
Hello,
I want to know if somebody had printing remotely using CUPS. I've
tried the lp -d printer@host file but I've got the message server-
error-service-unavailable.
I look at the documentation but I didn't find how can I make de
printing service available.
What could be wrong in
On Wed, 21 Nov 2001 04:52:58 -0500 (EST)
Jerry L. Kazdan [EMAIL PROTECTED] wrote:
The new computer I just bought has Windows XP. I'd like to
re-partition my (20 GB) hard disk keeping most it for Mandrake 8.1.
Does the disk re-partitioning software that comes with Mandrake 8.1
work with a
I had the flash/shockwave problem until last night
I installed lesstif, kdebase-nsplugins, and let
kde rescan for plugins (in the kontrol panel)
and it works, slow as a duck in konq, but it works
Brian D. Klar - CVE
OTS
WPAFB
-Original Message-
From: Angus Beath [mailto:[EMAIL
If it's a webserver only, then you don't need SMTP
From: LeTortorec, Jean-Louis [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: '[EMAIL PROTECTED]' [EMAIL PROTECTED]
Subject: [expert] Ports to keep open
Date: Tue, 20 Nov 2001 11:06:27 -0500
I'm trying to limit the ports open on a Linux box.
On Tue, 2001-11-20 at 20:25, Brian Schroeder wrote:
I asked for help on this problem once before, but, unforutunately,
no one felt qualified to respond. So on behalf of my hair, which
doesn't want to be torn out, if anyone can enlighten me on this I
would appreciate it.
Any PHP-based app
also with ftp, people behind firewalls using passive ftp won't be able tp
transfer as you haven't opened range of ports for them to use (PassivePorts
directive in proftpd.conf), scp would be simpler
bascule
On Tuesday 20 Nov 2001 4:06 pm, you wrote:
I'm trying to limit the ports open on a
I think that Bill's reply speaks for me. RpmDrake should at least tell
the user that the package is there. And/or there should be a release
note pointing that. Besides, whats is more dangerous, installing a
kernel or removing it? RpmDrake let a user remove it.
Finally, as I told you, and
run kups, it'll take you through a 30 second wizard to get printing to work
mark
On Wednesday 21 November 2001 18:59, you wrote:
Hello,
I want to know if somebody had printing remotely using CUPS. I've
tried the lp -d printer@host file but I've got the message server-
I just noticed a problem on my 8.1/cooker install.
Recently when installing a new package I ran out of space on /usr/local.
DiskDrake shows my /usr/local mounted as hdg1 with 8.8 G. It is formatted
as a Reiser partition and is the first 1154 cylinders of 2490 cyls (19G) on
a Maxtor
On 21 Nov 2001, Paul Rodríguez wrote:
Hi, I asked this on the newbie list, but got no response. I was hoping
someone here would know how to fix this.
How do I manually disable connecting to the internet on startup?
I have an adsl connection that I setup in Mandrake Control Center to
If it's a webserver only, then you don't need SMTP
And no one has a real need for port 113 (authentication).
I'm trying to limit the ports open on a Linux box.
If I reduce the list to :
- SMTP/25
- ssh/22
- proftp/21
- http/80
- https/443
- authentication/113
Do you think that
Guillermo J. González Rodas wrote:
Hello,
I want to know if somebody had printing remotely using CUPS. I've
tried the lp -d printer@host file but I've got the message server-
error-service-unavailable.
I look at the documentation but I didn't find how can I make de
printing service
You will need to load php-mysql to connect to the mysql server with php.
Sorry i read over that on the list you have php-pgsql.
Bill Nash.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED]]On Behalf Of Brian Schroeder
Sent: Tuesday, November 20, 2001 11:15 PM
To:
I have a recent iinstall of Mandrake 8.1. Using devfs,
how do you burn a cd with cdrecord?
Cdrecord gives:
[root /dev] cdrecord -scanbus
Cdrecord 1.10 (i586-mandrake-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling
cdrecord: Read-only file system. Cannot open '/dev/sg0'. Cannot open SCSI
Hallo!
I've selected 10x to burn 530Mb to a 10x compatible RW and it has took 11'36
...
That's about 4x??!!
Does any of you have this writer? Is it working fine? Thanks!! ;)
--
Joan Tur. Ibiza - Spain
Yahoo AOL quini2k ICQ 11407395
www.ClubIbosim.org
Linux: usuari registrat
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Wednesday 21 Nov 2001 8:46 pm, you wrote:
Hallo!
I've selected 10x to burn 530Mb to a 10x compatible RW and it has took
11'36 ...
That's about 4x??!!
Does any of you have this writer? Is it working fine? Thanks!! ;)
What software did
No one? A while ago I was forced to partially open 113 again as
apparently some irc servers require an ident before allowing a
connection to be established. A bit of experimentation found that they
were happy with an ipchains reject, but failed if the packet was just
dropped (DENY)
BillK
On
On Tue, 20 Nov 2001, Brandon Hutchinson wrote:
Just make sure you are using an up-to-date SMTP agent. I don't think Sendmail
has had a remote root exploit since 1997, but has had some recent local root
exploits.
I don't know if identd (113) is actually needed, although I think remote MTAs
Thanks for the suggestion, but I'm afraid php-mysql is in my list.
It's probably my fault for listing so many packages.
Brian.
From: Dave Sherman [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: Mandrake-expert [EMAIL PROTECTED]
Subject: Re: [expert] undefined function: mysql_connect()
Date:
On Tuesday 20 November 2001 23:45, Jose M. Sanchez wrote:
The problem is not with the ALiMagik or Via chipsets at all!
It's with the brain damaged Winbond Clock chip used on almost all Via
and ALiMagik motherboards.
YECCH!
Thanks for the info.
Your only recourse is to disable this error
I have to agree with Tarragon here. It doesn't look to me like any sort of
hacking attempt as it looks like their firewall is just recieving packets to
ports which they are blocking and it is dropping them. It very well could
be a machine on their network which has the IP address of 192.168.X.X
Thanks for the suggestion, but I'm afraid php-mysql is in my list.
It's probably my fault for listing so many packages.
I found that I had to disable SQL safe_mode in /etc/php.ini
[SQL]
sql.safe_mode = Off
Thanks... Dan.
Want to buy your Pack or Services from MandrakeSoft?
Go to
On Thu, 22 Nov 2001 10:08, Leif Madsen wrote:
I have to agree with Tarragon here. It doesn't look to me like any sort of
hacking attempt as it looks like their firewall is just recieving packets
to ports which they are blocking and it is dropping them. It very well
could be a machine on
Konqueror disapears when you get a midi file
in a web page. It leaves this thing
http://kittypuss.org/dialogue.gif
And I can't fix it, please help.
Btw, no one knew the answer on the newbie list.
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello All,
I have recently downloaded and burned up the corp server 2 CD iso's so that I
could install a minimal server with Xwindows and just a web server without all
of the EXTRA packages that seems to get installed.
The problem is that the install proceeds ok, up to the point after the
Hello All,
Is there a way to mount an ISO image as a ram drive so that I do not have to
keep burning CD's on images that do not work cleanly?
Thanks in advance,
Lonnie
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
I once again figured this out before an answer. IN a directory /etc/X11/wmsession.d
are several text files with exec paths to the window mangers. They must be entered
into kdm login manager exactly as listed (case sensitive) to make them work. I dont
know why they disappeared . but they are
On Thursday 22 November 2001 02:20, you wrote:
Is there a way to mount an ISO image as a ram drive so that I do not have
to keep burning CD's on images that do not work cleanly?
I don't think you can do it as a ram drive, but you can mount the image
directly to a dir:
mount -o loop -t
At 01:03 PM 11/21/2001 -0500, you wrote:
You will need to load php-mysql to connect to the mysql server with php.
Sorry i read over that on the list you have php-pgsql.
Bill Nash.
Bill,
Note that he does in fact have php-mysql installed, as well as php-pgsql.
Michael
--
Michael Viron
Thanks for your help.
With this I sent a small description about how network has bean
setting up and the hardware that the we are using.
Network 1 : 10.10.X.X / 255.255.0.0 (The Other Company/Firewall)
Network 2 : 192.168.5.X.X / 255.255.0.0 (My company)
The Switch we have 2 Vlans.
The
Hi everyone,
I went to launch a program tonight, and was startled to see all of the
icons for the different groups in KDE are gone - replaced with KDE's default
question mark icon. The same goes for most applications.
Any ideas on what might have caused this? Also, any ideas on how to get
Dear friends:
Just downloaded and installed LM 8.1 (clean, fresh install).
I have so far had only one problem that mystifies me: sound.
I had no problem whatsoever having LM 8.1 detect and configure my new SB16
ISA card. I was able to hear both Linus' voice and the midi sample just
like
On Thu, 22 Nov 2001 14:41, eduardo wrote:
Thanks for your help.
With this I sent a small description about how network has bean
setting up and the hardware that the we are using.
Network 1 : 10.10.X.X / 255.255.0.0 (The Other Company/Firewall)
Network 2 : 192.168.5.X.X / 255.255.0.0 (My
Oh, stupid me. I found the problem. I was trying to get Corel Photo-Paint 9
to install, and PP9 includes menu-2.1.5rpm, straight from Corel Linux/debian.
Normally this wouldn't pose a problem, but since Mandrake was smart, and
reused debian code for their menu management system, the PP9 code
Hi,
I have installed VNC from the Mandrake 8.1 distribution on two different
systems, an AMD 450 and an AMD 700. The AMD 450 is trying to be a
monitorless, keyboardless, mouseless server running Mandrake 8.1 and
vncserver, which I start via my .kde/Autostart.
On the AMD 700, I run
So sprach »Brian Schroeder« am 2001-11-21 um 12:55:23 +1030 :
php-mysql-4.0.6-3mdk
mod_php-4.0.6-5mdk
The php-mysql and php versions don't match. Try to install the same
versions.
Alexander Skwar
--
How to quote: http://learn.to/quote (german) http://quote.6x.to (english)
Homepage:
I don't think you can do it as a ram drive, but you can mount the image
directly to a dir:
mount -o loop -t iso9660 -r /path/to/file.iso /path/to/mountdir
Theoretically, you could, just loopback mount it on a mount point that
is mounted on a RAM disk. But you'd need a CD's worth of RAM to
So sprach »David E. Fox« am 2001-11-21 um 23:00:56 -0800 :
But as a corrolary, have people tried installing from an ISO image
via loopback mount? That would make it kinda cool since not everyone
That's supposed to work, although I've tried it myself.
Alexander Skwar
--
How to quote:
Looks like the sg module is not loaded.
Do 'insmod sg' as root and try
cdrecord -scanbus
again. The /dev/scd0 device is not used for the Recording. Only for
reading CD.
Klar Brian D Contr MSG SICN wrote:
I have a recent iinstall of Mandrake 8.1. Using devfs,
how do you
49 matches
Mail list logo
