Please let me know when you do build the disk (and drivers) for this. My
machine is basically unusable until this happens. I don't understand how M$
can work and install without special drivers!
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Bob [EMAIL PROTECTED] kirjoitti viestissään (lähetysaika Keskiviikko 15 Lokakuu 2003
00:38):
Hello,
I'm trying to load Mandrake on a brand new P4 2.8ghz system using the Intel
D845GVAD2, with two 10K ROM SATA drives. I have an IDE CDROM drive
attached.
What SATA controller?
That board does
Hello,
I'm trying to load Mandrake on a brand new P4 2.8ghz system using the Intel D845GVAD2, with two 10K
ROM SATA drives. I have an IDE CDROM drive attached.
Mdk 9.0 would not find the CD Drive - died right away.
Mdk 9.1 would load some more from the CD, but then would fail looking for the
Hello,
I'm trying to get a IDE OnStream 30GB tape drive working with LM 9.0. I found some docs that said
that kudzu would auto install the drive under Redhat 2.4.x kernels, but 9.0 doesn't seem to have
that. I did install harddrake, but it just comes up with a black screen for about 5 secs
Can previous version kernels be used in 9.0 without problems? In other words, can you
simply install the 8.2 kernel files into a 9.0 box? What about the 2.2.x kernel from
a 8.2 disk? Are there other packages that depend on the kernel that would need to be
brought in?
Bob
Want to buy your
Hello all,
After going through a couple drives, multiple motherboards, and different versions of
Mandrake,
I've now come to the conclusion that Mandrake 9.0 won't talk to my Maxtor 120GB drive.
When I
try to use fdisk, it says Unable to read /dev/hdc. Yet the same drive and
motherboard work
Anyways, does 2.2.7a fix this 2GB file limit problem? How long has
this problem been around (this is the first I've heard of it, but I'm
not a samba user).
It most certainly does. I posted something here, didn't get any replies, so
I went to the Samba list, where the issue was discussed hot
Hey Mandrake,
I see there is still no regular update to Samba to fix the very nasty 2gb file limit.
So, I checked cooker. There -is- one in there, but the cooker packages won't install
on a 9.0 machine! I'm getting endless dependencies. What's up with this? Is it
possible to ask for an
Please, let's not get into the reply-to argument.
What is FAR, FAR worse with this mailing list is that digest people get an
incorrect reply-to!!! It doesn't get to the list! I've mentioned this a few
times, but it never seems to get fixed. So, I have to correct each and every
message that I
Hello,
It seems that on every Mandrake box I have, regardless of version (7.1, 8.2, 9.0),
today I got the following email from each box:
Reloading httpd-perl: [ OK ]
Reloading httpd: [ OK ]
Reloading httpd-perl: [ OK ]
Reloading httpd: [ OK ]
Reloading httpd-perl: [ OK ]
I've noticed this each weekend in my mailbox for root:
error running postrotate script
run-parts: /etc/cron.daily/logrotate exited with return code 1
The syslog.1 and start of the syslog show nothing out of the ordinary. What could be
causing this?
Bob
Want to buy your Pack or Services from
I've got a 9.0RC2 box, as well as a couple other boxes (8.2, and a 7.1 updated) that,
suddenly this morning, generated an error email, and apache stopped. Here's some
example emails:
Reloading httpd-perl: [ OK ]
Reloading httpd: [ OK ]
Reloading httpd-perl: [ OK ]
Reloading httpd: [
Hello,
I've noticed on my last few installs of Mandrake 8.2, that I get a tiny bit of hard
disk access, once every 4 seconds or so. I've looked in the logs, and I don't see
anything out of the ordinary, and there is nothing going on. What would explain this?
Bob
Want to buy your Pack or
Hello,
I've got a client who has a Windows app that runs ODBC connections to a file server.
The software company wants the client to set up a MS SQL server to supposedly fix the
problems we are having. I'm a little familiar with MySQL, but is it a direct drop-in
replacement for MS' product?
Hello,
I have a client that is using a Windows program to access a database file on a Samba
share. The program is using Windows built-in ODBC drivers.
Question: how can I make database queries to this file? The only info I've got so far
is that it is a Fox pro database. It's not being
Wow, this is really sad news. ORBZ, the open mail relay checking system, is shutting
down.
http://derf.cc/orbz_shutdown.txt
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
I just did two installs of Beta 4. Hope this is the right place to put this.
#1. I didn't see a Press F1 for text setup screen. I needed this for one machine,
and I finally got it after several tries, but still don't know when it was looking for
it.
#2. In both text and graphic
Hello,
Is there any module available for the Adaptec 2903 SCSI card? Thanks.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
Messing around with Mandrake 8.2 beta 2.. I still can't find hdparm. What package
contains this program?
Also, is this the appropriate place to submit bug reports?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Hello,
I just recently added a SCSI tape backup to my Mandrake 7.1 system. I used an Adaptec
2903 PCI card.
What do I need to do in order to be able to access the tape drive? I tried messing
with various programs, but no go.
Thanks.
Bob
Want to buy your Pack or Services from
Thanks for the replies re: PCAnywhere. Will check out Wine and see if it works.
Next question: I just installed 8.2beta on a machine. Where is HDPARM? Isn't that a
program that comes with the kernel?
It would be really nice to have some searchable database that you could scan to find
what
Is there a PC Anywhere client (NOT a host) port for Linux? I'd like to be able to
stay in Linux
when having to dial-in to various Winders machines I have to take care of. Yes, I
know about
the various other programs that exist that do the same thing, but I need to be able to
talk to
a PC
Hi Gang,
Can I (easily) use a Travan 4 or 5 IDE tape drive with Mandrake? Any difference
between IDE and SCSI?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Try using smbpasswd -a username to add the user to the smb users.
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Wow, there is a major problem with the Kernel upgrade for Mandrake 7.1 at least, if
not 7.x.
Aside from the missing files in the source to be able to compile a new kernel,
communication to my IDE drives seems to crash the kernel totally.
For example, I have a script that uses mirrordir to
Hello,
I've recently set up a link between two Mandrake 7.1 boxes using modems. I've got
the boxes connecting properly, and passing traffic. However, I noticed that there
is a bit of delay... a little more than a normal dialup. I did some tests and found:
Dialing up from a Windows 98 client
Another question...
On a couple of other MDK boxes, I am running a Samba server to talk with Windows 98
clients. It works, but when I copy files from the Windows machines TO the Mdk boxes,
it takes forever... I noticed there are tons of collisions on the ethernet line. These
collisions occur
Check your errorlog for httpd. In mine, the problem was bad (changed) permissions for
/var/log/httpd.
Bob
Crap, I got this just after I did it...
now i can't get it working and can't even seem to get the old ones working
again either...
what a pain in the ass...
I am at a complete
Hello Gang,
With all the messages about problems with the latest Apache upgrade, I'm a little
leary of installing it. Were there any significant security
holes in 1.3.12 or 1.3.14?
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Of course, the upside is that future updates should be very easy to do
(unless something major changes again), just because of the way
Apache, mod_perl, PHP, et. all have become modularized by
Jean-Michel. It's a better way to do things, but wreaks some havoc
initially on the older
How many have you had? According to my logs, as of right now, I've got
897. (This would be a fun competition!
I've got 10700 so far!
Bob
Want to buy your Pack or Services from MandrakeSoft?
Go to http://.mandrakestore.com
Hello,
It seems that most all the RPMs coming out now are made with the version 4 RPM, which
doesn't work on Mandrake 7.x distros.. Is there a way to install the new RPM on the
older machines?
Also, I notice that the Digest reply-to address is -STILL- wrong, months after I first
reported
No Message Collected
I have several Mandrake 7.1 firewall systems running on 486 processors with no
problems. I say give it a shot!
Bob
486
processors are not running on any current version of Mandrake,
to my knowledge.
Hello,
I've got a problem with one of my ISPs that I'm 95% sure is on their end, but I want
to get some opinions of the experts here, and know what exactly to tell them.
Scenerio:
Mandrake 7.1 Box with two ethernet cards, one on ISP #1 (DSL), another one on ISP #2
(T1). Default route is set
Hi Orlando,
Thanks for the reply.
you set T1 ISP as your default and your replys from ping to the DSL ISP
comes from the T1?
like that: ping DSP-ISP
reply (coming from T1-ISP) xxx ms ???
well... if this is the behaviour... the error is your side :-) the reply
from a
HI Pierre,
Thanks for the reply. Ok, here's a little more detail:
DSL ISP:
Machine IP: 64.65.206.24 Netmask: 255.255.255.0 (I actually have 32 IPs, but that's
the mask they say to use, and it does work properly, even if
I ping
I can only suspect you are experiencing the rule
which states: a packet from netX cannot be routed through netY and back to
netX [EXCEPT if the final destination is netZ]*
One more thought. If a http request is made from netX to a machine on netX,
and the machine generates reply packets
Hello,
I am looking for a program to run on Mandrake that will emulate
some of the same features on the Apache server as ColdFusion...
Specifically, I need to create a password-protected area on a
website that allows users to search a database of professionals
based on state, name, etc., and
Hi Gang,
Here's a weird problem I'm trying to work through.
Mandrake 7.1 machine has two network cards:
Card A on 1.2.3.4, with default gateway set to 1.2.3.1.
Card B on 20.0.0.20.
Both networks connect to the outside world.
Problem: I can successfully ping the 1.2.3.4 address, but I
Is there an RPM out there to make these work?
I am using the one from AdvancedExtraNet with 7.1, and it works.
However, I still have a problem that so far, no one has seemed to be
able to even acknowledge, let alone fix. WHen FrontPage 2000 clients try to publish,
it goes for a while, then
Timing chatter on the IDE bus Some DVD-ROMs on VIA chipsets can cause
corruption of install-time data on hard disks past kernel 2.2.15. WD and
Maxtor of same speed or a slower WD with a fast Maxtor master will just eat
your data with timing chatter.
And since WD doesn't do the CRCs
Hello,
I was having a problem with emails having uppercase letters being rejected by Postfix
on my Mandrake 7.1 machine. After checking with the Postfix folk, I found that this
was a bug fixed over a year ago. I searched, and found that ALL mandrake Postfix RPMs
are from the 1999 version,
Hello,
I am running the Mandrake Apache Advanced Extranet Server version 1.3.12
that came with 7.1, and the Frontpage 4.0 RPM that was on the
advancedextranet web site (which incidentally, is down).
Apache and frontpage have been working fine, but today I had a client
who is using FP2000 try
Hello,
I have a linux Masq box that has three ethernet cards:
eth0 = connection to the internet
eth1 = private network #1
eth2 = private network #2.
Networks 1 and 2 both talk to the internet via IP Masquerading.
All is well.
Now, I need to put a limit on the bandwidth for private network
Consider this scenerio:
-
| BOX 1 | | BOX 2|
| eth1+ Private net #1 | eth1+ Private net #3
Internet --+eth0 | 192.168.1.x
Hello,
I need to have a shell script (and/or CGI) be able to modify the
contents of an existing file (to which it has permission). Let's say
that somewhere in the file "test.conf", there is a line that says
"test=on". I would like to be able to change that one line to
"test=off" or
Would someone PLEASE fix the REPLY-TO address for the digest of this list?! Replies
get sent to "expert-request", which then fail.
Bob
Once again, I am chiming in on requesting a -stable- version of version 7.1. 7.1
seems to work on a lot of systems (if you can get past the blasted CDROM installer
lockup bug!), and its updates are a known.
Is there anyway someone can make an updated ISO file of the master CD with all the
Hmm, I've been using Webmin all this time without SSL,
and I can't seem to make it work WITH ssl... I have to
use http://localhost:1 to connect. How do I enable
SSL for Webmin?
Bob
the netware server for a Linux box?
Thanks. Please CC your replies directly to me.
Bob
[EMAIL PROTECTED]
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
How do you get Mandrake to auto adjust for Daylight Savings Time?
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Hello,
I have noticed that on a 7.1 Install, when I boot the machine and have
DHCP enabled for my internet connection, SOMETIMES the machine takes on
the name of the first part of the reverse IP lookup of the IP address
assigned thru DHCP, ignoring my setting. How do I get DHCPcd to NOT
change
Help! I have put together a small masq box, and now whenever I try to add a RPM
package, I get the error "Incorrect Architecture!" (or something similar). I can use
the switch to ignore this, but
that doesn't help when using Webmin or Mandrake Update. There must be a config file
that is
Is there such a thing as updated ISO files (for burning) for Mandrake
version 7.1? After seeing all the problems with 7.2, I really want to
stick with 7.1, but I'd like to have all the updated packages installed
the first time. If such a thing doesn't exist, how can it be created?
I have
Hello,
In the close inspection I've been giving my machine since it was hacked,
I see that there was a 100kbit/sec upload averaged over 5 minutes.. that
is a lot of data. I don't see any new files to account for this, and
suspect the hacker might have uploaded something naughty.
Question:
Thanks for the reply, but that doesn't work. At least in the form:
find /etc/* -amin 8
Seems to return some files that have been created long ago. The actual files do
seem to change with time. Example:
[root@main postfix]# date
Fri Dec 1 22:55:43 EST 2000
[root@main postfix]# find /etc/*
Hi gang,
Last night, my webserver machine (Mandrake 7.1) was "defaced". The
hacker got root access, and uploaded a script that went into every
virtual host and replaced the index.htm(l) file with his own file. His
"defacement" included his email, and a link to his site:
DO this: change your NetZero password (in the Windows program) to: "abcde". Now your
encrypted password you need for Dial up networking will be: "0a1" (that's number
0, five a's, and number 1)
have fun!
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]"
Hello,
I just built a new MDK 7.1 machine to use as a Masq box.
Tried it on my DSL modem, and for some reason, DHCP doesn't
seem to work. Everything works fine if I manually set the
IP address, but I should be able to use DHCP.. I am using
DHCP on a MDK 6.1 system with the same DSL modem, so
Hello,
I am trying to set up ftp-only users. I have created the users (using Webmin), but if
I have the shell set to any of the following, I can't log in with ftp:
/etc/ftponly
/bin/sh
/bin/false
All the other shells work fine.. but I don't want the user to be able to telnet in.
My docs
mirrordir *isn't* broken. It's designed to do exactly what it says, create a
mirror. That means it recreates the directory structure exactly as it is on
the source machine, under the specified target directory (in your case /tmp).
It may not be what you want, but that's what it's supposed
try rsync, wget, fmirror
I will check into those. I have been using WGET, and it works, but my main beef is
that it seems to recreate the entire source directory tree at my destination, even if
I specify the destination. Tried a bunch of switches, and couldn't get it NOT do do
that.
Try this :
mirrordir -v --no-chown --exclude-glob ".in.*" \
ftp://ftp.ciril.fr/pub/linux/mandrake-devel/cooker/ \
/mnt/linux2/
(change the last directory to your own destination).
FWIW, I just tried this. It seems to put the files in the right place, but I'm still
getting all sorts of
Hello,
I'm trying to use COPYDIR (or MIRRORDIR) to copy an entire web site from one server to
mine. I am using the syntax:
copydir -v ftp://username@domain name//home/user/www /home/user/http
The program starts, asks for my password, then starts copying files. However, it
tries to copy a
Hello,
I just had a machine go down on me yesterday. Kept giving me "no free space on drive"
errors. It turned out that my /VAR partition was messed up, and after forcing a
check, indeed it was full.
I found a directory called MAIL inside /VAR/LOG that had THOUSANDS of files in it,
taking
I'm running the Apache server version 1.3.12 from the MDK 7.1 disk. I
want to be able to have secure pages.
I installed OpenSSL 0.9.5, but mod_ssl wants a more recent Apache
server. 1.3.12 is working really nicely at the moment, and I hate to
rock the boat. Where can I find a mod_ssl
I had the same problem getting Sympa to work. Mandrake 7.1 didn't come with the
DBfile perl module. I did manage to find it and get it installed, but boy, this
should have been packaged with the Sympa RPM!!!
I think you can get it from CPAN. Do a GET DB_File
Bob
On Thu, 2 Nov 2000, bill
Thanks for everyone's input - I figured out how to get sendmail mail to do the right
thing.
However, my question becomes this: how can I configure my MDK 7.1 such that when a CGI
script is executed from a given virtual host, it puts the virtual host's name on the
"from: " domain? I have
Hello,
I have a user that has a frequently-accessed CGI script that is like an auto-responder
- simply sends a message to the mail address the user types in on this form.
The problem is that the From: part of the message says "[EMAIL PROTECTED]", of which
nlenet.net is the name of the
All linux Experts!
I am looking for some simple code that will allow me to telnet into my machine at a
pre-defined port number, and connect directly to one of the machine's serial ports, so
that data I send goes out the serial port, and vice versa. Flow control not necessary.
This seems like
Can we please knock it off with the PGP messages? THose of us on
Digests have a hard enough time, and this just makes it worse. Thanks.
Bob
Keep in touch with http://mandrakeforum.com:
Subscribe the "[EMAIL PROTECTED]" mailing list.
Hello,
Can someone write me a quick CGI script? I've been messing around, and
can't seem to get this working.
I want to have the script read the REMOTE_ADDR parameter, create a text
file with the IP and some added info (for a http link), and save it to a
certain location. That's all it
I've noticed on every Linux box I have here (different versions of Mandrake) that
using the command LESS to view the contents of a file always drops one line per page.
This happens via telnet, or even if I'm at the console.
It appears the status line at the bottom covers up text, and when
Your mileage might vary, but it's supposed to translate everything
(www.test.com, etc) back to "test.com". You might also want to use the
"UseCanonicalName on" directive.
I think the last time I tried the "UseCanonicalName On", it added my default domain
name to everything in the log, which
I am getting the following error in my log:
sendmail: warning: sendmail is set-uid root, or is run from a set-uid root process
However, I am running Postfix, not sendmail! Does postfix give off this error? I
think I did have sendmail installed at one point, so it is possible it is still
I have been working on this for a while now, with no success.
I did figure out the library weirdness I posted before - it
seems that two of the files I downloaded of the FP extensions
were funky.
Anyway, my problem remains: if I create a virtual server named
test.com, with a server alias of
I have pulled any remainder of hair out trying to fix this problem.
I am trying to get FrontPage server extensions working on my MDK 7.1 system. I've
been trying a lot of stuff in the past two days, all to no avail. I recompiled Apache
from the sources, only to find that perl and php support
Hello,
Tonight, I was watching the lights on the switch I have connecting my DSL line to
my servers, and saw a prolonged, intensive activity to one of my machines that is
a web server, amongst other things. During this activity, I telnetted in, and took
a peek at the logs to see just what was
Hi Chris,
Thanks for the reply. Unfortunately, everyone seems to be missing my
point. I am familiar with how to do what you are suggesting.
Here's the deal: I want to allow 3 different LANs to access the web,
but not each other. This part is no big deal. I have a linux box
that will be this
I'm really wondering if there is a IPFWADM that I can
still use with my 2.2.15-4mdk kernel. I have one on my
Mandrake 6.1 box, which I believe is using 2.2.14.
I believe you use 'ipmasqadm' instead, which (I thought) was the 2.2.x
version of ipfwadm. Or, at least, It Works For Me
There's a lot of reading material on his site. I was looking at the Trinity OS
firewall script, and he is still using
ipfwadm for port forwarding.
He's using ipmasqadm portfw (all the docs I've found recommend this
method) in
Next question:
I have a Linux system I want to replicate a couple of times.
There is about 350 megs worth of data on a 1 gig HD, and I want to
copy the data to some 500 meg hard drives.
man dd
Ok, did that, clueless. Says it converts and copies files. Example?
I want to
Hello,
I've read and re-read and re-read the IPCHAINS how-to, and I still can't
figure out how to accomplish port forwarding with mandrake 7.1.
Do a net search on "Trinity OS" and "David Ranch", and do what the man
says.
There's a lot of reading material on his site. I was
Next question:
I have a Linux system I want to replicate a couple of times. There is about 350 megs
worth of data on a 1 gig HD, and I want to copy the data to some 500 meg hard drives.
None of the disk cloning software wants to let me do this, as my destination is
smaller than my source.
Hello,
I've read and re-read and re-read the IPCHAINS how-to, and I still can't figure out
how to accomplish port forwarding with mandrake 7.1.
Consider the following scenerio:
LM 7.1 box with 3 network cards:
eth0 - IP of 1.2.3.4 - outside internet connection
eth1 - IP of 192.168.1.1 -
On a somewhat related topic, consider this scenerio:
I want a linux box to function sort of like a switch, passing through internet
traffic, but isolating each network device from another.
Example:
eth0 = connection to a Masqing box (192.168.1.x network)
eth1 = office 1 (192.168.1.41-50)
eth2
Hello,
I recently did something to my system (don't know what yet!), and it seems
that a number of things suddenly got changed, like my ethernet card aliases.
No problem, fixed that up. However, when I log in with Telnet, I get:
bash-2.04$
Instead of:
[bob@r0 bob]$
(Meaning user BOB at
10 times faster? Me thinks you are dreaming. Bandwidth is bandwidth, and
there's only so much. Whether you set up 10 simultaneous downloads or do
only one, you are going to get the file in the same period of time.
Actually, I found at least with a dialup with Win95 and Netscape, downloading
Hello,
I have a number of questions in this one message. If you know the answers
to any of them, please reply! Also, please CC your reply directly to me
([EMAIL PROTECTED]). Thanks!
#1. I am running NAMED from BIND on a couple machines, mostly for a caching
nameserver. Named is putting a
Hi Gang,
I'm trying to redirect a couple ports on my masq box so that I can get through to a
Win95 PcAnywhere client. On a Mandrake 6.1 box, I did the following:
ipmasqadm portfw -a -P tcp -L 64.65.206.24 5631 -R 192.168.2.10 5631
ipmasqadm portfw -a -P udp -L 64.65.206.24 5632 -R
Norton's Ghost http://www.ghost.com does NOT support windows 2000
(just checked) and does NOT support any Linux ext2 O/S.
The version 5 of Norton Ghost does INDEED support ext2. I have used it a couple times
to clone a hard disk, and it even resized a partition correctly.
Bob
Hello,
Is there is a site that has ALL of the latest RPMs that come with the Linux Mandrake
7.x disks? I am
looking for the equivalent to Red Hat's ftp site. Looked around on
linux-mandrake.com, and saw nothing. Thanks.
Bob
Maybe I'm not getting it right, but I went to your information and built
the files. I did the ifup ppp0 and it dialed. I did the ifdown ppp0
and it disconnected. I then made chat-isp and modified the options
files. I also made the isp file in peers. When I tried to invoke pppd
call isp,
I have installed Mandrake 7.1 on a i586 (intel PIIX ide controler). The purpose of
this computer is "just" firewalling and
forwarding so i would like my hard disk to spin down after a few time but even if i
specifie a spin down time of 5 seconds
(hdparm -S 1 /dev/hda), it doesn't stop.
I
kheader is an initscript that creates a dummy header file in /boot if
you're running a stock mdk kernel. If you recompiled your kernel
without an mdk extension and have an older (more than say 2 months)
version of the initscripts RPM, it erroneously reports failed
(somebody left off the
I think this user has the same problem as I have, that there are NO prompts
from the ISP's interface which waits until pppd sends some LCP packets before
continuing the handshake.
My reading indicates that the PPP session should commence to send the LCP
packets after the chat script exits
Hi Bob and all,
Bob, this is excellent and works really well!
Now if we could get it to initiate kppp ...so you could see
the modem traffic and see throughput without looking
at the log. Haven't put it in the rc file yet...but works really
well from the terminal so far. We are
I was wondering. What happens to the connection when the app initiating
the connection is closed or dies?
Hey Mark,
It will connect, probably not transfer any traffic, then disconnect after the idle
timeout occurs.
Also, for some reason when I tried to start the process of installing this
Hi Gang,
I solved a couple of the problems I last reported. Have two more that I still can't
resolve:
#1. upon bootup, I get the following:
rc: Starting kheader failed
Everything else loads OK. What is KHEADER? I must have broken this recently, as it
worked before.
#2. I get a warning
1 - 100 of 114 matches
Mail list logo