I have installed the Voice Keyer and have it using VAC to send audio to my
Flex 5000. I have checked the Allow PTT to Override VAC but when I press
MOX to transmit with the microphone it does not override.
I'm sure I'm doing something wrong but can't find my error.
Paul Delaney - K6HR
This is how it is supposed to work. MOX is not PTT. Those are lines on
the mic jack and a jack in the back. The MOX is how someone operating
remote through applications like Teamviewer or MS Remote Desktop keys up
the transmitter with audio input from VAC, not the station mic. With
Allow PTT
Sterling
Sent: Sunday, October 28, 2012 5:47 PM
To: flexradio@flex-radio.biz
Subject: Re: [Flexradio] Voice Keyer Question
This is how it is supposed to work. MOX is not PTT. Those are lines on
the mic jack and a jack in the back. The MOX is how someone operating
remote through applications like
Anyone have any info if power SDR will have a voice keyer built in?
Seems like a very basic feature.
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives:
Check this out. Works great with PSDR:
http://kc.flexradio.com/KnowledgebaseArticle50275.aspx
- Original Message -
From: Dave Mayfield W9WRL
To: flexradio@flex-radio.biz
Sent: Sunday, November 27, 2011 3:08 PM
Subject: [Flexradio] Voice Keyer
Anyone have any info if power
- K6HR
paul.hamra...@verizon.net wrote:
Check this out. Works great with PSDR:
http://kc.flexradio.com/KnowledgebaseArticle50275.aspx
- Original Message -
From: Dave Mayfield W9WRL
To: flexradio@flex-radio.biz
Sent: Sunday, November 27, 2011 3:08 PM
Subject: [Flexradio] Voice
I don't think I am having conversion problems since I have all programs
set to 48k though. Based on the experiences of others recounted here so
far, I would anticipate that my 48k recordings going from N1MM over VAC
and through PSDR all set to 48k would work.
But it sounds like there's a
Matt and others,
I have read all in the thread, my one addition is that I noticed that you
are running VAC 4.10. There were and has been timing and buffering issues
that degrade over time with the 4.10 version.. You might want to try the
4.09 version instead, and you will need the signed
Hi,
I originally posted a version of this to N1MM's reflector, but further
troubleshooting points to PowerSDR so I'll continue my quest here.
Environment:
Windows 7 64bit
N1MM Logger V11.6.4
FlexRadio Flex-3000 with PowerSDR 2.0.22
Playback occurs over Virtual Audio Cables (VAC) 4.10.0.2537
I
AI1P,
Go to the Setup|Audio|VAC form, check Manual Latency, try adjusting the
value. This cured a similar problem that I had with my VoiceKeyer program.
73, Ray, K9DUR
http://k9dur.info
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
Thanks for the suggestion Ray. I tried both larger (up to 300) and
smaller (down to 20) values, and the problem persists, including the
way it gets worse over time.
On Tue, Jul 5, 2011 at 10:55 AM, Ray, K9DUR k9...@rnacs.com wrote:
AI1P,
Go to the Setup|Audio|VAC form, check Manual Latency,
Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of kd0...@gmail.com
Sent: Tuesday, July 05, 2011 8:44 AM
To: flexradio@flex-radio.biz
Subject: [Flexradio] Voice keyer through PSDR truncates end of audio on output,
progressive worsening
Hi
I noticed something similar running MARS-ALE with my Flex-3000. I didn't
find a solution and eventually gave up.
George, PJ5/KJ6VW
On 05-Jul-11 11:44, kd0...@gmail.com wrote:
Hi,
I originally posted a version of this to N1MM's reflector, but further
troubleshooting points to PowerSDR so I'll
If using Vista or Win7, make sure the default format sampling rate for
the Windows VAC sound devices (playback and record) matches what you
use for the VAC. The default is 44.1 KHz which forces Windows to do an
up-conversion to 48KHz
Right click on the actual sound device and select
It can become very boring to call CQ in SSB-Contests.
Is there any way to have an internal voicerecorder for this? Iam talking
about a voicekeyer not the record and play feature!
Any old fashion TRX does have this feature, which mostly can be activated by
a small button on the frontside.
Is
@flex-radio.biz
Subject: [Flexradio] Voice keyer
It can become very boring to call CQ in SSB-Contests.
Is there any way to have an internal voicerecorder for this? Iam talking about
a voicekeyer not the record and play feature!
Any old fashion TRX does have this feature, which mostly can be activated
Dieter,
What OS are you running?
I wrote a VoiceKeyer program a couple of years ago that interfaces to
PowerSDR using VAC. It is free to download and use (from my website -- URL
below). The only problem is that I cannot support it under Windows 7. It
works fine with XP or Vista, but I have
://k9dur.rnaconsultingservices.com/Downloads.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz
[mailto:flexradio-boun...@flex-radio.biz] On Behalf Of Ray - K9DUR
Sent: Tuesday, March 01, 2011 3:46 PM
To: 'Dieter Schuster'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Voice keyer
Dieter,
What
Dieter,
Why not use the voice keyer in N1MM? That's what I use. It also works with
N3FJP and perhaps others. I wrote a KB article on setting up N1MM. Search
the KB.
73,
Mack de W4AX
On Tue, Mar 1, 2011 at 3:23 PM, Dieter Schuster dl...@web.de wrote:
It can become very boring to call CQ in
Tim,
Thank you for the plug. One small correction, however -- my software is not
shareware, it is donationware. What you download is fully functional
updateable forever. I do not restrict features or withhold support in order
to force payment. Any donations received are strictly voluntary.
-radio.biz] On Behalf Of Ray - K9DUR
Sent: Tuesday, March 01, 2011 3:46 PM
To: 'Dieter Schuster'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Voice keyer
Dieter,
What OS are you running?
I wrote a VoiceKeyer program a couple of years ago that interfaces to
PowerSDR using VAC
/Downloads.aspx
-Tim
-Original Message-
From: flexradio-boun...@flex-radio.biz [mailto:
flexradio-boun...@flex-radio.biz] On Behalf Of Ray - K9DUR
Sent: Tuesday, March 01, 2011 3:46 PM
To: 'Dieter Schuster'; flexradio@flex-radio.biz
Subject: Re: [Flexradio] Voice keyer
Dieter
Does anyone have a voice keyer working with Win7 x64?
___
FlexRadio Systems Mailing List
FlexRadio@flex-radio.biz
http://mail.flex-radio.biz/mailman/listinfo/flexradio_flex-radio.biz
Archives: http://www.mail-archive.com/flexradio%40flex-radio.biz/
To: 'Flex Radio Reflector'
Subject: [Flexradio] Voice Keyer v1.2
Version 1.2 of my VoiceKeyer program has been released. The only change is
the addition of a None option to the list of serial ports. Selecting
None will prevent VoiceKeyer from activating the radio PTT. This may be
useful if you
Version 1.2 of my VoiceKeyer program has been released. The only change is
the addition of a None option to the list of serial ports. Selecting
None will prevent VoiceKeyer from activating the radio PTT. This may be
useful if you want to use VOX for PTT.
73, Ray, K9DUR
Reflector'
Subject: [Flexradio] Voice Keyer v1.2
Version 1.2 of my VoiceKeyer program has been released. The only change is
the addition of a None option to the list of serial ports. Selecting
None will prevent VoiceKeyer from activating the radio PTT. This may be
useful if you want to use VOX
Tim, W4TME, has found a couple of minor issues with the VoiceKeyer program
which I will address after I get back from Field Day next week.
However, one bug can be particularly nasty to recover from. You would have
to hack the registry to get rid of an erroneous setup value.
Until this is
At 08:42 AM 10/12/2007, FireBrick wrote:
I would prefer the voice keyer be intetgrated into Pwsdr.
One less box, thingy on the desk to grab rfi and/or button to push.
What if it were software, but not part of PowerSDR? No cables/boxes,
but declutters PowerSDR.
Jim, W6RMK
Bill,
I also want to avoid one more hardware box. But, with VAC vCOM, we have
all of the facilities we need for a stand-alone voice keyer program, IF
PowerSDR can be modified to allow simultaneous use of both VAC the
microphone. No extra hardware boxes, just another program running, which
Jim,
You wrote, What if it were software, but not part of PowerSDR? No
cables/boxes, but declutters PowerSDR.
That is EXACTLY what I am suggesting.
73, Ray, k9DUR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
I would prefer the voice keyer be intetgrated into Pwsdr.
One less box, thingy on the desk to grab rfi and/or button to push.
Plus, for traveling, one less item to carry and foreget the cables for.
I don't do much ssb contesting, but for DXing, I presently use the MFJ and
don't laugh.
It's rf
Bill and others,
If you use your computer sound card, using another voice program
would be easy on the 5K, just feed the output of the sound card
into the line in on the 5K, since it has a built in mixer, you can
easily adjust levels. There are several voice sound programs for this
Romac
Dudley,
Page 36 of the Flex-5000 Operating Manual says that you can select only 1
input channel at a time. That is you can select either Mic or Line In
RCA, but not both.
73, Ray, K9DUR
___
FlexRadio mailing list
FlexRadio@flex-radio.biz
Ray,
You are exactly right, I was typing inputs and thinking of
outputs.. But still a simple mixer or run the mic through the sound
card will still work. I used an external mixer to mix CQ-100 output
into the radios now, along with a CW IDer from Romac..
73,
Dudley
WA5QPZ
At 03:19 PM
, October 12, 2007 3:19 PM
To: 'Dudley Hurry'; 'FireBrick'; 'FlexRadio List'
Subject: Re: [Flexradio] Voice Keyer some ideals!
Dudley,
Page 36 of the Flex-5000 Operating Manual says that you can select only 1
input channel at a time. That is you can select either Mic or Line In
RCA
I wonder if any body has considered adding a voice keyer to the software
package?
I would like to call CQ from a prerecorded message. It could be programmed
to key and call once or as many times as it takes to get a response. This
would be a nice feature for contesting as well. Thanks
Mike
It is on the enhancement list
-Tim
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Mike Monnier
Sent: Friday, April 13, 2007 2:34 PM
To: [EMAIL PROTECTED]
Subject: [Flexradio] Voice Keyer
I wonder if any body has considered adding a voice keyer
it the
same way or by keying the push to talk. What do you think?
Mike
- Original Message -
From: Tim Ellison [EMAIL PROTECTED]
To: Mike Monnier [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Friday, April 13, 2007 2:39 PM
Subject: RE: [Flexradio] Voice Keyer
It is on the enhancement list
-Tim
it as a feature request.
Edwin Marzan
AB2VW
From: Mike Monnier [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: [Flexradio] Voice Keyer
Date: Fri, 13 Apr 2007 14:33:39 -0400
I wonder if any body has considered adding a voice keyer to the software
package?
I would like to call CQ from
, April 13, 2007 2:52 PM
To: Tim Ellison
Subject: Re: [Flexradio] Voice Keyer
Since it is yet to make it to the planning table may I suggest this
keyer
software have the ability to not only call CQ from a single recording
but a
string of recordings played in sequence. It would sound more natural
I will gather responses here and put them together in a feature request. Any
more ideas?
Mike
- Original Message -
From: Tim Ellison [EMAIL PROTECTED]
To: Mike Monnier [EMAIL PROTECTED]; [EMAIL PROTECTED]
Sent: Friday, April 13, 2007 3:29 PM
Subject: RE: [Flexradio] Voice Keyer
I
Is there any software available that can be used as a voice keyer for the
SDR-1000?
Thanks
Zack
N8FNR
-- next part --
An HTML attachment was scrubbed...
URL:
http://mail.flex-radio.biz/pipermail/flexradio_flex-radio.biz/attachments/20070312/e636cb8e/attachment.html
I did a google for voice keyer and several hits came back.
http://www.kd4udy.com/UDY-2VoiceKeyer/
http://www.dxsoft.com/en/products/aavoice/
http://www.dxzone.com/cgi-bin/dir/jump2.cgi?ID=6299
73 N5VFF/YI9VFF - Brian
On 3/12/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
Is there any
43 matches
Mail list logo
