Re: [Framers] unavailable fonts message

rameMaker software. Subject: Re: [Framers] unavailable fonts message Have you searched the reference pages? On occasion I couldn't find mystery missing fonts until I exported to MIF and searched in a text editor. Some were in a .book file, which I didn't understand at all. On Thu, Mar 30, 2017 at

Re: [Framers] unavailable fonts message

how do I locate unavailable fonts in my documents, so I can stamp them > out? ___ This message is from the Framers mailing list Send messages to framers@lists.frameusers.com Visit the list's homepage at http://www.frameusers.com Archives loc

[Framers] unavailable fonts message

Hey, how do I locate unavailable fonts in my documents, so I can stamp them out? Al Friend Tech Writer/Editor Safety Officer Documentation Control Coordinator -- This email was sent by Howell Laboratories, Inc

Using MIF files to extricate unavailable fonts from a book

Hi Fellow FrameUsers, I've heard about using MIF files to extricate unavailable fonts from a book. How is that accomplished? Thanks. Doug Mckinney | Datron World Communications, Inc. Technical Writer II 3055 Enterprise Ct. | Vista, CA 92081 USA Direct 760 602-7001 | Fax. 760 597-1510 | dmckin

RE: Using MIF files to extricate unavailable fonts from a book

, Doug Sent: September-11-14 2:10 PM To: framers@lists.frameusers.com Subject: Using MIF files to extricate unavailable fonts from a book Hi Fellow FrameUsers, I've heard about using MIF files to extricate unavailable fonts from a book. How is that accomplished? Thanks. Doug Mckinney | Datron

RE: Using MIF files to extricate unavailable fonts from a book

Better to use the Fonts pod, no? The docs will tell you what to do. Craig From: jeff.coatswo...@jonasclub.com To: framers@lists.frameusers.com Subject: RE: Using MIF files to extricate unavailable fonts from a book Date: Thu, 11 Sep 2014 18:21:39 + Save .fm files as MIF, find

RE: Unavailable fonts message - incorrect?

Excellent summary from Fred!I'll just add the (very minor) point that SVG graphics can have font information in them, too. If the font's glyphs used in the SVG's aren't embedded, that would trigger this FM error. Original Message Subject: RE: Unavailable fonts message

RE: Unavailable fonts message - incorrect?

of the glyph outlines from the font itself, so the graphics are totally dependent on each system's complement of installed fonts. -Fred Ridder From: da...@davidartman.com To: docu...@hotmail.com; pascale.stephen...@upu.int; framers@lists.frameusers.com Subject: RE: Unavailable fonts message

Unavailable fonts message - incorrect?

of the glyph outlines from the font itself, so the graphics are totally dependent on each system's complement of installed fonts. -Fred Ridder From: da...@davidartman.com To: docudoc at hotmail.com; pascale.stephenson at upu.int; framers at lists.frameusers.com Subject: RE: Unavailable fonts message

Unavailable fonts message - incorrect?

An HTML attachment was scrubbed... URL:

RE: Unavailable fonts message - incorrect?

: RE: Unavailable fonts message - incorrect? Wow. This e-mail goes in my reference folder. Next time I need this info, I want it to be able to retrieve it immediately. Thanks for great lesson, Fred. Alison Alison Craig | Technical Documentation Lead Ultrasonix | 130-4311 Viking Way | Richmond

Unavailable fonts message - incorrect?

Subject: RE: Unavailable fonts message - incorrect? Wow. This e-mail goes in my "reference" folder. Next time I need this info, I want it to be able to retrieve it immediately. Thanks for great lesson, Fred. Alison Alison Craig | Technical Documentation Lead Ultrasonix | 130-4311

RE: Unavailable fonts message - incorrect?

...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of STEPHENSON pascale Sent: Wednesday, August 14, 2013 6:17 AM To: framers@lists.frameusers.com Subject: Unavailable fonts message - incorrect? Hello I am using FrameMaker 9 on Windows 7. When I open a particular book, I get

RE: Unavailable fonts message - incorrect?

You posting seems to reflect several small misconceptions about how FrameMaker works. Let me see if I can address them one at a time. First, a single unavailable fonts message in one file can, in fact, also be the cause of subsequent unresolved cross-references messages in other files. When

Unavailable fonts message - incorrect?

...@lists.frameusers.com [mailto:framers-bounces at lists.frameusers.com] On Behalf Of STEPHENSON pascale Sent: Wednesday, August 14, 2013 6:17 AM To: framers at lists.frameusers.com Subject: Unavailable fonts message - incorrect? Hello I am using FrameMaker 9 on Windows 7. When I open a particular book, I get

Unavailable fonts message - incorrect?

You posting seems to reflect several small misconceptions about how FrameMaker works. Let me see if I can address them one at a time. First, a single "unavailable fonts" message in one file can, in fact, also be the cause of subsequent "unresolved cross-references" mes

Unavailable fonts message - incorrect?

rs at lists.frameusers.com Subject: RE: Unavailable fonts message - incorrect? You posting seems to reflect several small misconceptions about how FrameMaker works. Let me see if I can address them one at a time. First, a single "unavailable fonts" message in one file can, in fact, also b

Unavailable fonts message - incorrect?

at lists.frameusers.com] On Behalf Of Fred Ridder Sent: Thursday, August 15, 2013 8:06 AM To: STEPHENSON pascale; framers at lists.frameusers.com Subject: RE: Unavailable fonts message - incorrect? You posting seems to reflect several small misconceptions about how FrameMaker works. Let me see if I

Unavailable fonts message - incorrect?

Hi all Thanks for the replies. I now have a better understanding of the situation, if I haven't exactly solved it. However, I have enough information to be going on with. Thanks all for your help. Regards Pascale -- next part -- An HTML attachment was scrubbed... URL:

Unavailable fonts message - incorrect?

Hello I am using FrameMaker 9 on Windows 7. When I open a particular book, I get the classic 'unavailable fonts' error on many of the files (followed by 'unresolved cross-reference' errors, but for now I'm assuming the two are related). When my colleague opens the same book, he doesn't get any

Unavailable fonts message - incorrect?

Hello I am using FrameMaker 9 on Windows 7. When I open a particular book, I get the classic 'unavailable fonts' error on many of the files (followed by 'unresolved cross-reference' errors, but for now I'm assuming the two are related). When my colleague opens the same book, he doesn't get any

Re: Use Blank Paper ruler units (Was: Unavailable Fonts error)

On 24 Jan 2013 at 16:11, Stuart Rogers wrote: Here's a thought: In the [Preferences] section of maker.ini, there's a UseDisplayUnitInTemplate setting, followed by various (English and metric) defaults. UseDisplayUnitInTemplate is set to Off in both my maker.ini and the saved original

Use Blank Paper ruler units (Was: Unavailable Fonts error)

On 24 Jan 2013 at 16:11, Stuart Rogers wrote: > > Here's a thought: In the [Preferences] section of maker.ini, there's a > > UseDisplayUnitInTemplate setting, followed by various (English and > > metric) defaults. UseDisplayUnitInTemplate is set to Off in both my > > maker.ini and the saved

Re: Unavailable Fonts error

Have you tried saving as .mif and searching for that font? On Wed, Jan 23, 2013 at 4:06 PM, Karen Robbins karendes...@gmail.com wrote: A file (generated file from a plain text source) keeps displaying the unavailable fonts error each time it opens. I've run Silicoin Prairie's Paragraph Tools

RE: Unavailable Fonts error

the unavailable fonts error each time it opens. I've run Silicoin Prairie's Paragraph Tools on this file, and the only font it finds in the file is HelveticaNeueLT Std--exactly as it should be. I've checked the master pages (four)--no hidden text boxes; and the reference page (one)--nothing

RE: Unavailable Fonts error

work to undo a presumptuous default. SiliconPrairie's Table Tools plugin can delete any table tags that aren't used in a document, including the default tags. 'Unavailable' fonts can also hide on reference and master pages (I think: haven't checked this). But these will also show up in a MIF

RE: Unavailable Fonts error

Karen Robbins wrote: You are correct, that's just what it was--Times instances in the default tables. (I did the mif to find this out; there are no tables in the document itself.) That's why I said to insert an instance of each table format. I already thought I'd have to do what you

RE: Unavailable Fonts error

I sure do learn something new every day! :-) I could also define those formats in a stock document and always import them to the working document. I do something similar for indexes--a format master imported each time a new one is generated. I like the idea of using SP's Table Tools to just

Re: Unavailable Fonts error

On 24/01/2013 11:18 AM, Karen Robbins wrote: I sure do learn something new every day! :-) I could also define those formats in a stock document and always import them to the working document. I do something similar for indexes--a format master imported each time a new one is generated. I like

Re: Unavailable Fonts error

On 24/01/2013 11:05 AM, Combs, Richard wrote: Or for a comprehensive, permanent solution, you can modify any and all format definitions to suit you (as well as which formats exist) in the behind-the-scenes template that FM uses when you create a new document without selecting a template (Use

RE: Unavailable Fonts error

Stuart Rogers wrote: I just modified shellnew.fm with your suggested changes, and there is no effect on a new document. The table formats still use Times New Roman, the ruler is still in cm. There is another file, custom with no extension, also in the fminit directory. I am able to use

Use Blank Paper ruler units (Was: Unavailable Fonts error)

On 24/01/2013 1:31 PM, Matt Sullivan wrote: I believe the Document Properties in custom.fm will control units. (setting custom.fm to use a specific unit of measure should fix this) Should, but doesn't. The Custom file (no extension) opens with a ruler in inches. New documents opened with

RE: Unavailable Fonts error

I wrote: Oops, sorry. I misremembered some information from many years ago. You're right, it's custom that's used when you create new blank paper documents in FM (shellnew.fm is used when you create a new FM doc outside of FM; don't ask me why). Eating lunch seems to have slightly revived

RE: Unavailable Fonts error

For anyone still using FrameMaker 7 on Mac, the 'custom' file that sets the defaults for new blank documents seems to be /Adobe FrameMaker 7.0/Modules/Custom New Document, in whatever root folder you have located your Classic apps. -- Steve ___ You

RE: Use Blank Paper ruler units (Was: Unavailable Fonts error)

On 24/01/2013 3:07 PM, Combs, Richard wrote: Stuart Rogers wrote: Thanks for the link, Richard. I tried following the instructions and overwrote the custom. file; no joy. Sure sounds like a bug. But IIRC, you're on FM 10, right? It worked in FM 10 for me. Here's a thought: In the

RE: Unavailable Fonts Error: Save to .ps, but...

Catalog does not prevent the book error, Could not open [thisfilename].fm, because it uses unavailable fonts, on saving as PDF. Doing the same from the Character Catalog still leaves a default ¶ font that cannot be removed (or modified from the user interface at least). I presume

Re: Use Blank Paper ruler units (Was: Unavailable Fonts error)

Could this possibly be a FMinit setting? Grant On 1/24/2013 12:19 PM, Stuart Rogers wrote: On 24/01/2013 1:31 PM, Matt Sullivan wrote: I believe the Document Properties in custom.fm will control units. (setting custom.fm to use a specific unit of measure should fix this) Should, but doesn't.

Unavailable Fonts error

n text source) keeps displaying the > "unavailable fonts" error each time it opens. > > I've run Silicoin Prairie's Paragraph Tools on this file, and the > only font it finds in the file is HelveticaNeueLT Std--exactly as it > should be. I've checked the master pages (four)--no hidden

Unavailable Fonts error

t;have to do this extra work to undo a presumptuous default. SiliconPrairie's Table Tools plugin can delete any table tags that aren't used in a document, including the default tags. 'Unavailable' fonts can also hide on reference and master pages (I think: haven't checked this). But these will

Unavailable Fonts error

Karen Robbins wrote: > You are correct, that's just what it was--Times instances in the default > tables. (I did the mif to find this out; there are no tables in the document > itself.) That's why I said to insert an instance of each table format. > I already thought I'd have to do what you

Unavailable Fonts error

I sure do learn something new every day! :-) I could also define those formats in a "stock" document and always import them to the working document. I do something similar for indexes--a format master imported each time a new one is generated. I like the idea of using SP's Table Tools to just

Unavailable Fonts error

On 24/01/2013 11:18 AM, Karen Robbins wrote: > I sure do learn something new every day! :-) > > I could also define those formats in a "stock" document and always > import them to the working document. I do something similar for > indexes--a format master imported each time a new one is generated.

Unavailable Fonts error

On 24/01/2013 11:05 AM, Combs, Richard wrote: > > Or for a comprehensive, permanent solution, you can modify any and > all format definitions to suit you (as well as which formats exist) > in the behind-the-scenes template that FM uses when you create a new > document without selecting a template

Unavailable Fonts error

Stuart Rogers wrote: > I just modified shellnew.fm with your suggested changes, and there is no > effect on a new document. The table formats still use Times New Roman, > the ruler is still in cm. > > There is another file, "custom" with no extension, also in the fminit > directory. I am able

Unavailable Fonts error

I believe the Document Properties in custom.fm will control units. (setting custom.fm to use a specific unit of measure should fix this) -Matt Matt Sullivan technical communication | online training | eLearning twitter: @mattrsullivan phone: 714 960-6840 On Jan 24, 2013, at 10:13 AM,

Use Blank Paper ruler units (Was: Unavailable Fonts error)

On 24/01/2013 1:31 PM, Matt Sullivan wrote: > I believe the Document Properties in custom.fm will control units. > (setting custom.fm to use a specific unit of measure should fix this) > Should, but doesn't. The Custom file (no extension) opens with a ruler in inches. New documents opened with

Unavailable Fonts error

I wrote: > Oops, sorry. I misremembered some information from many years ago. You're > right, it's custom that's used when you create new blank paper documents in FM > (shellnew.fm is used when you create a new FM doc outside of FM; don't ask me > why). Eating lunch seems to have slightly

Unavailable Fonts error

For anyone still using FrameMaker 7 on Mac, the 'custom' file that sets the defaults for new blank documents seems to be /Adobe FrameMaker 7.0/Modules/Custom New Document, in whatever root folder you have located your Classic apps. -- Steve

Use Blank Paper ruler units (Was: Unavailable Fonts error)

On 24/01/2013 3:07 PM, Combs, Richard wrote: > Stuart Rogers wrote: > >> Thanks for the link, Richard. I tried following the instructions >> and overwrote the custom. file; no joy. > > Sure sounds like a bug. But IIRC, you're on FM 10, right? It worked > in FM 10 for me. > > Here's a thought: In

Unavailable Fonts Error: Save to .ps, but...

le from the Paragraph Catalog and the Table Catalog does not prevent the book error, "Could not open [thisfilename].fm, because it uses unavailable fonts," on saving as PDF. Doing the same from the Character Catalog still leaves a "default ? font" that cannot be removed (or modi

Use Blank Paper ruler units (Was: Unavailable Fonts error)

Could this possibly be a FMinit setting? Grant On 1/24/2013 12:19 PM, Stuart Rogers wrote: > On 24/01/2013 1:31 PM, Matt Sullivan wrote: >> I believe the Document Properties in custom.fm will control units. >> (setting custom.fm to use a specific unit of measure should fix this) > > Should, but

Unavailable Fonts error

A file (generated file from a plain text source) keeps displaying the unavailable fonts error each time it opens. I've run Silicoin Prairie's Paragraph Tools on this file, and the only font it finds in the file is HelveticaNeueLT Std--exactly as it should be. I've checked the master pages

RE: Unavailable Fonts error

Karen Robbins wrote: A file (generated file from a plain text source) keeps displaying the unavailable fonts error each time it opens. I've run Silicoin Prairie's Paragraph Tools on this file, and the only font it finds in the file is HelveticaNeueLT Std--exactly as it should be. I've

RE: Unavailable Fonts error

You are correct, that's just what it was--Times instances in the default tables. (I did the mif to find this out; there are no tables in the document itself.) I already thought I'd have to do what you say... How annoying that I have to do this extra work to undo a presumptuous default.

Unavailable Fonts error

A file (generated file from a plain text source) keeps displaying the "unavailable fonts" error each time it opens. I've run Silicoin Prairie's Paragraph Tools on this file, and the only font it finds in the file is HelveticaNeueLT Std--exactly as it should be. I've checked the ma

Unavailable Fonts error

Karen Robbins wrote: > A file (generated file from a plain text source) keeps displaying the > "unavailable fonts" error each time it opens. > > I've run Silicoin Prairie's Paragraph Tools on this file, and the > only font it finds in the file is HelveticaNeueLT St

Unavailable Fonts error

You are correct, that's just what it was--Times instances in the default tables. (I did the mif to find this out; there are no tables in the document itself.) I already thought I'd have to do what you say... How annoying that I have to do this extra work to undo a presumptuous default.

Unavailable Fonts error

Have you tried saving as .mif and searching for that font? On Wed, Jan 23, 2013 at 4:06 PM, Karen Robbins wrote: > A file (generated file from a plain text source) keeps displaying the > "unavailable fonts" error each time it opens. > > I've run Silicoin Prairie's Paragr

FW: Unavailable fonts and greyed out section numbering tab

Thanks for the various responses on my unavailable fonts question from last week. In the end I went with the simplest suggestion from Debra below. I'm now able to update the book and the page numbering now works across all the files. I am still trying to figure out why the options

RE: Unavailable fonts and greyed out section numbering tab

-boun...@lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Andy Smith (WFL) Sent: Monday, February 27, 2012 8:37 AM To: framers@lists.frameusers.com Subject: FW: Unavailable fonts and greyed out section numbering tab Thanks for the various responses on my unavailable

FW: Unavailable fonts and greyed out section numbering tab

Thanks for the various responses on my unavailable fonts question from last week. In the end I went with the simplest suggestion from Debra below. I'm now able to update the book and the page numbering now works across all the files. I am still trying to figure out why the options

Unavailable fonts and greyed out section numbering tab

-bounces at lists.frameusers.com [mailto:framers-boun...@lists.frameusers.com] On Behalf Of Andy Smith (WFL) Sent: Monday, February 27, 2012 8:37 AM To: framers at lists.frameusers.com Subject: FW: Unavailable fonts and greyed out section numbering tab Thanks for the various responses on my

Re: Unavailable fonts and greyed out section numbering tab

...@wingedfeet.co.uk Cc: framers@lists.frameusers.com Subject: Re: Unavailable fonts and greyed out section numbering tab Before you update your book, open all the files in the book and it should work. For the font problem, try at the book level Control+F (Find), Character Format, then look

Re: Unavailable fonts and greyed out section numbering tab

On 23/02/2012 10:38 PM, Combs, Richard wrote: Andy Smith (WFL) wrote: I'm using Frame 10 on Windows 7 64 bit. The printer is a Brother HL1450 or an HP CM1415fnw. I suggest you take Steve's advice and make Adobe PDF, not some physical printer, the printer for FM. I recommend using the

Unavailable fonts and greyed out section numbering tab

On 23/02/2012 10:38 PM, Combs, Richard wrote: > Andy Smith (WFL) wrote: > >> I'm using Frame 10 on Windows 7 64 bit. The printer is a Brother >> HL1450 or an HP CM1415fnw. > > I suggest you take Steve's advice and make Adobe PDF, not some > physical printer, the printer for FM. I recommend using

Re: Unavailable fonts and greyed out section numbering tab

the Sections tab greyed out. All the other numbering options, such as page numbering, seem to be working but the section numbering doesn't work. So looking for a solution I tried to update the book but I'm finding that it reports that one of my sections uses unavailable fonts. At that point

RE: Unavailable fonts and greyed out section numbering tab

Message- From: Steve Johnson [mailto:chinask...@gmail.com] Sent: 23 February 2012 00:40 To: andy.sm...@wingedfeet.co.uk Cc: framers@lists.frameusers.com Subject: Re: Unavailable fonts and greyed out section numbering tab Before you update your book, open all the files in the book

RE: Unavailable fonts and greyed out section numbering tab

Andy Smith (WFL) wrote: I'm using Frame 10 on Windows 7 64 bit. The printer is a Brother HL1450 or an HP CM1415fnw. I suggest you take Steve's advice and make Adobe PDF, not some physical printer, the printer for FM. I recommend using the SetPrint plugin (sundorne.com) to set the default in

Unavailable fonts and greyed out section numbering tab

nd in the document. Any ideas? > -Original Message- > From: Steve Johnson [mailto:chinaski69 at gmail.com] > Sent: 23 February 2012 00:40 > To: andy.smith at wingedfeet.co.uk > Cc: framers at lists.frameusers.com > Subject: Re: Unavailable fonts and greyed out section numberin

Unavailable fonts and greyed out section numbering tab

Andy Smith (WFL) wrote: > I'm using Frame 10 on Windows 7 64 bit. The printer is a Brother HL1450 > or an HP CM1415fnw. I suggest you take Steve's advice and make Adobe PDF, not some physical printer, the printer for FM. I recommend using the SetPrint plugin (sundorne.com) to set the default

Unavailable fonts and greyed out section numbering tab

; > Any ideas? > > > > >> -Original Message- >> From: Steve Johnson [mailto:chinaski69 at gmail.com] >> Sent: 23 February 2012 00:40 >> To: andy.smith at wingedfeet.co.uk >> Cc: framers at lists.frameusers.com >> Subject: Re: Unavailable f

Unavailable fonts and greyed out section numbering tab

the Sections tab greyed out. All the other numbering options, such as page numbering, seem to be working but the section numbering doesn't work. So looking for a solution I tried to update the book but I'm finding that it reports that one of my sections uses unavailable fonts. At that point

Unavailable fonts and greyed out section numbering tab

the Sections tab greyed out. All the other numbering options, such as page numbering, seem to be working but the section numbering doesn't work. So looking for a solution I tried to update the book but I'm finding that it reports that one of my sections "uses unavailable fonts." At

Unavailable fonts and greyed out section numbering tab

ering window has the Sections tab > greyed out. All the other numbering options, such as page numbering, seem to > be working but the section numbering doesn't work. > > > > So looking for a solution I tried to update the book but I'm finding that it > reports that one of my secti

Unavailable fonts

Hi Framers, I'm sure someone has posted a response to this question, but unfortunately the archive isn't searchable. (Hint...) Anyway, I'd like to know of a way to remove and replace all the unavailable fonts in a FM file *before* I open it and see the There are unavailable fonts message

RE: Unavailable fonts

and replace all the unavailable fonts in a FM file *before* I open it and see the There are unavailable fonts message. My only options at that point are to click OK, in which case it does the replacements, or Cancel, in which case it doesn't open the file. Even if I let it do the replacements

Re: Unavailable fonts

, but unfortunately the archive isn't searchable. (Hint...) Anyway, I'd like to know of a way to remove and replace all the unavailable fonts in a FM file *before* I open it and see the There are unavailable fonts message. My only options at that point are to click OK, in which case it does the replacements

Re: Unavailable fonts: more or less resolved!

Thanks to both Richard Combs and Art Campbell for their suggestions. I did also spend a bit of time trolling through the archives the hard way, before they sent me some easier search tips (thanks, guys!), and had already found the 'turn off remember missing fonts' tidbit. That helps, and I did

RE: Unavailable fonts

Richard suggests just turning off the Remember missing font names. In the past, I have had unavailable fonts turn up in legacy documents where that trick did not work. If the font is in an default paragraph format of an unused table type, save the file as .mif and search on the font name. You

Unavailable fonts

Hi Framers, I'm sure someone has posted a response to this question, but unfortunately the archive isn't searchable. (Hint...) Anyway, I'd like to know of a way to remove and replace all the unavailable fonts in a FM file *before* I open it and see the "There are unavailable fonts&quo

Unavailable fonts

of a way to remove and replace all the > unavailable fonts in a FM file *before* I open it and see the "There are > unavailable fonts" message. My only options at that point are to click > OK, in which case it does the replacements, or Cancel, in which case it > d

Unavailable fonts

this question, but > unfortunately the archive isn't searchable. (Hint...) > > > > Anyway, I'd like to know of a way to remove and replace all the > unavailable fonts in a FM file *before* I open it and see the "There are > unavailable fonts" message. My only options at th

Unavailable fonts: more or less resolved!

Thanks to both Richard Combs and Art Campbell for their suggestions. I did also spend a bit of time trolling through the archives the hard way, before they sent me some easier search tips (thanks, guys!), and had already found the 'turn off "remember missing fonts"' tidbit. That helps, and I

Unavailable fonts

Richard suggests just turning off the "Remember missing font names". In the past, I have had unavailable fonts turn up in legacy documents where that trick did not work. If the font is in an default paragraph format of an unused table type, save the file as .mif and search on the font

unavailable fonts

Hi! Does anyone know how I add fonts to FrameMaker 7.2? There's not much in the help on it. Any help on this topic is greatly appreciated. I know I'm missing something, probably something elemental. Cheers, Deb ___ You are currently subscribed to

RE: unavailable fonts

Debra Laroche wrote: Hi! Does anyone know how I add fonts to FrameMaker 7.2? There's not much in the help on it. Any help on this topic is greatly appreciated. I know I'm missing something, probably something elemental. You don't add fonts to FrameMaker. You add fonts to your PC.

Re: unavailable fonts

Does anyone know how I add fonts to FrameMaker 7.2? There's not much in the help on it. You don't add fonts to FM. You add them to Windows. Open the \windows\fonts folder on your PC. Then choose File Install New Font and pick a location of the font you want to install. It's also usually

Re: unavailable fonts

It's a Windows thing, not a FrameMaker thing. Have you ever added fonts to Windows? Start Control Panel Fonts. You can either drag and drop fonts or you can click Install On Thu, May 20, 2010 at 6:24 PM, Debra Laroche debra.laro...@gmail.com wrote: Hi! Does anyone know how I add fonts to

Re: unavailable fonts

Thanks everyone for your responses. I'll give this another shot this morning. Cheers! Deb ___ You are currently subscribed to framers as arch...@mail-archive.com. Send list messages to fram...@lists.frameusers.com. To unsubscribe send a blank email

unavailable fonts

Debra Laroche wrote: > Hi! > Does anyone know how I add fonts to FrameMaker 7.2? There's not much in the > help on it. > > Any help on this topic is greatly appreciated. I know I'm missing > something, > probably something elemental. You don't add fonts to FrameMaker. You add fonts to your PC.

unavailable fonts

> Does anyone know how I add fonts to FrameMaker 7.2? There's not much in > the help on it. > You don't add fonts to FM. You add them to Windows. Open the \windows\fonts folder on your PC. Then choose File> Install New Font and pick a location of the font you want to install. It's also usually

unavailable fonts

It's a Windows thing, not a FrameMaker thing. Have you ever added fonts to Windows? Start > Control Panel > Fonts. You can either drag and drop fonts or you can click Install On Thu, May 20, 2010 at 6:24 PM, Debra Laroche wrote: > Hi! > Does anyone know how I add fonts to FrameMaker 7.2?

unavailable fonts

Thanks everyone for your responses. I'll give this another shot this morning. Cheers! Deb

unavailable fonts

Hi! Does anyone know how I add fonts to FrameMaker 7.2? There's not much in the help on it. Any help on this topic is greatly appreciated. I know I'm missing something, probably something elemental. Cheers, Deb

Re: How to find Unavailable Fonts

On 2010-01-11 12:14 AM, syed.hos...@aeris.net wrote: Hmmm ... now the console is telling me: The Arial Font is not available. Arial will be used in this session. The Arial Font is not available. Arial will be used in this session. The Arial Font is not available. Arial will be

How to find "Unavailable Fonts"

On 2010-01-11 12:14 AM, Syed.Hosain at aeris.net wrote: > Hmmm ... now the console is telling me: > > The "Arial" Font is not available. >"Arial" will be used in this session. > The "Arial" Font is not available. >"Arial" will be used in this session. > The "Arial" Font is not available. >

RE: How to find Unavailable Fonts

Syed.Hosain wrote: If you have all the files open, and the book update still fails, something very odd is going on, and it may have nothing to do with the missing fonts. Are you getting any kind of error message (check the Console) after you try to update? Are the time stamps of the

RE: How to find Unavailable Fonts

OK, the fonts aren't the problem. And FM appears to be updating the generated list files. With help from a respondee on this list, I found and fixed the missing font problem. Sent out an e-mail about that! :) Just to confirm that the content is being regenerated, go to one of the headings

How to find "Unavailable Fonts"

Sorry, I have note really been following the thread closely so I hope this has not already been said. I assume you have investigated Reference and Master Pages through the document? Also, fonts can hide in character and paragraph formats, in spaces, non-breaking spaces, automated number

How to find "Unavailable Fonts"

Syed.Hosain wrote: > > If you have all the files open, and the book update still fails, > something very odd is going on, and it may have nothing to do with the > missing fonts. Are you getting any kind of error message (check the > Console) after you try to update? Are the time stamps of the

  1   2   >