experimented with the comment layers in InDesign...yet!
HTH
Regards,
Peter Gold
KnowHow ProServices
Art Campbell wrote:
I have a PDF in a FM file imported by reference. Although it contains
several comments (callouts, highlighting, etc.) they don't display in
FM. I know they're
column, perhaps the width of the
reference frame is bumping into the column and pseudo-wrapping to the
lower position.
Have you tried using an anchored frame below, with a rule, instead of
the reference frame, just to see if it's stable?
HTH
Regards,
Peter Gold
KnowHow
; pasting the format stops when you copy other
content to the clipboard.
If you need to apply the override to different paragraph formats, create
examples in a separate FrameMaker file, and copy special from it.
HTH
Regards,
Peter Gold
KnowHow ProServices
You wrote:
Dos
perhaps that's not the issue.
HTH
Regards,
Peter Gold
KnowHow ProServices
Rene Stephenson wrote:
We have the same problem with 2 similar BlockLine paragraph tags that use 2 pt
font w/ 6 pt space above and paragraph below pointing to a line on the
reference page. Both are aligned
.
* Dedicated paragraph format variations are GOOD for page-flow tweaking,
because they are stable and are proof against Remove Overrides actions.
One takes the road that leads to that inner peach that all technical
authors seek constantlyG.
Regards,
Peter Gold
KnowHow ProServices
text.
There's a lot of formatting and layout control over footnotes. No table
footnotes, though. No x-refs to fake them, either.
Thanks for asking.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed
, so
users don't need full Acrobat.
HTH
Regards,
Peter Gold
KnowHow ProServices
At 11:35 -0400 18/4/07, Molly Keegan wrote:
I am wondering how others keep track of changes made to their books. I am
the only technical writer at my company, and we have a rigorous system
.
Regards,
Peter Gold
KnowHow ProServices
Art Campbell wrote:
I'd set the Printer metrics line in maker.ini to ON, to get accurate
screen display. And I'd also set the Adobe distiller printer instance
as the default.
Art
___
You are currently subscribed
they may be planning.
HTH
Regards,
Peter Gold
KnowHow ProServices
The filter for QuarkXPress import into FrameMaker was
hacked from the equivalent InDesign filter and only
supports QuarkXPress 3.x and 4.x files. Newer files
(5, 6, and 7) cannot be opened in FrameMaker due
.
Regards,
Peter Gold
KnowHow ProServices
Diane Gaskill wrote:
Hi all,
I know Adobe keeps all of their numbers a Big Secret, but I am
creating a comparison spreadsheet in my research on FM vs AT and I
need to have a general idea of how many FM seats have been installed.
FM has
: the common factor is ice cubes. Leave them out of
drinks to avoid morning hangovers.
Moral, perhaps? Be careful when buying lots of FrameMaker
licenses.
Perhaps companies that are late FrameMaker adopters are too
precarious already to benefit from it?MG
Regards,
Peter Gold
KnowHow
of contents file, it retrieves the
table of contents file's chapter number.
HTH
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank
explanatory text is
likely to be prone to human error.
HTH
Regards,
Peter Gold
KnowHow ProServices
Bob Williams wrote:
Hi All,
This may be one of those 'Well, if I KNEW which menu and function this
was -
I'd have already done it myself' questions, but...
Wondering HOW to simply double-space my PDF
time you see
Peking, duck!G
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED
Jim, have you tried selecting the graphic in FrameMaker, and
then in Graphics Tools, choosing Fill None? Sometimes this
enables transparency in an imported graphic. Worth a try. Let
us know how it works for you.
HTH
Regards,
Peter Gold
KnowHow ProServices
Stuart Rogers
, now.
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http
these output steps, there's still a chance.
HTH
Regards,
Peter Gold
KnowHow ProServices
Pinkham, Jim wrote:
I checked and had Fill defaulted to None. Thanks for the suggestion,
though. It was well worth trying.
-Original Message-
From: Peter Gold [mailto:[EMAIL PROTECTED
the
ineffectiveness of public education to bring students to a
useful level of literacy, than about the media and syntax
that's used to transmit recorded culture and history.
Regards,
Peter Gold
KnowHow ProServices
Daniel Emory wrote:
--- [EMAIL PROTECTED] wrote:
As far as a device
it.
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman
abilities, but they are pretty rare among professional
publishing products, which gives FrameMaker an important edge
in usability and efficiency.
Regards,
Peter Gold
KnowHow ProServices
Rene Stephenson wrote:
I agree with Steve. The time saved of being able to use
variables
- Escape o H (uppercase H). If it opens and is
readable, save it to a new name and proceed working with it.
If it fails, it's most likely that the file is corrupt.
FM 7 should open files as far back as FM 5.
HTH
Regards,
Peter Gold
KnowHow ProServices
the corners, the lines and corners will be at
45- or 90-degrees.
To resize polygons, you drag a corner. You can also reshape it
- drag the corners - by choosing Graphics Reshape, then drag
a corner. Reshaping by dragging without holding Shift, can
break the rectangularity.
Regards,
Peter
,
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman/options
perspective.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED
the experience of dropping the one tablet left him very upset he
almost turned back to Egypt. However, his close advisers told him not
to worry, take these two tablets and call us in the morning!
--
Regards,
Peter
___
Peter Gold
KnowHow ProServices
the book, and from within the book, use Shift+File Open All
Files in Book . Then, repeat the test with a different single
specification in place. (NOTE: Open All Files in Book opens the files
in minimize size.)
Regards,
Peter
___
Peter Gold
KnowHow ProServices
Hi, Rob:
I know a lot about FrameMaker, but I tremble when trying to engage
with statistics in any specific way. I am quite comfortable with
sweeping generalities and fuzzy logic.
Rather than treat your number differences as problems, I'd take the
statistical approach of determining what factor
If you search Google for framemaker thumb tab without quotes, you'll
find Brad Anderson's ground-breaking tutorial on exactly this process.
HTH
Peter
___
Peter Gold
KnowHow ProServices
On 25/6/07 09:31, Radha Padmanabhan [EMAIL PROTECTED] wrote:
Hi Helping Hands
//table move to Bottom of current column
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 6/26/07, Ron Miller [EMAIL PROTECTED] wrote:
Hi:
I 'm working in Frame 7.1 running Windows in Parallels on a Mac Book
Pro.
I can't seem to select a row in a table
a body row), and the table continues onto another page, the
repeated headers on all continuation pages are not selectable. Selecting and
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed
welcome on these forums. They do keep things
interesting, and they do get results. But... searching Help and Google
help you improve your own resource even more.
Regards,
Peter Gold
KnowHow ProServices
___
You are currently subscribed
not
sure if an FM file can remember a printer specification, to make this
work.
You can read fmbatch documentation in FM user manual or online help,
and of course, you can find DoBatch documentation at the cudspan
location.
HTH
Regards,
Peter
___
Peter Gold
KnowHow
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com
or processing the closed files.
* If some of the files have unsaved changes that you want to protect
from errors that the global procedure might cause, save these files
before performing the global procedure(s.)
HTH
Regards,
Peter Gold
KnowHow ProServices
On 7/24/07, Fred Ridder
that you
invest some learning effort, to control the output.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
You can drag the Windows taskbar to a vertical position. I always use
mine there, to recover vertical space in the window; I also use my
Mac's Dock vertically, for the same reason.
HTH
Regards,
Peter
Peter Gold
KnowHow ProServices
Documents to look for differences.
If this works, we could name the technique after ourselves and place
it in public domain for the whole FM-er communityG.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http
reference pages of the file. Have you tried
using it for help before asking for support?
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list
Hi, David:
I don't use it, but I think it's safe to say that it's useful where
authors want to display eponymously-named paragraph tags like
Chapter, Section, Unit, Step, etc, in cross-references or system
variables like running headers/footers.
HTH
Regards,
Peter Gold
KnowHow
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman/options
,
Peter
___
Peter Gold
KnowHow ProServices
On 8/14/07, Graeme R Forbes [EMAIL PROTECTED] wrote:
One of the things I dislike about Virtual PC (7.0.3) is that I can't
see any of the programs I installed using it. I've got WindowsXP,
FrameMaker 7.1 and Adobe Reader
name, overwriting the original
file. Your book file is already created new from scratch, so it's
probably already cleaned up.
Save all files, keep all files open, and try printing again.
Let us know how this works.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
Great catch, William! Whoever thinks about PS text frames anymore?
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
Hi, Steve:
If I understand your request correctly, method c would be to use
paragraph formats set to Across All Columns and Side Heads for your
full-span paragraphs, with a flow that enables side head space.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
Hi, Lin:
I seem to remember hearing about a utility that can do this; perhaps someone
on the list hasn't forgotten its name.
However, I believe that SnagIt, and perhaps some other capture tools, can
capture scrolling windows.
Regards,
Peter
___
Peter Gold
KnowHow
currently working with the file electronically, but even two monitors
is not enough, so I need to go to hard copy.
TIA
Lin
___
Regards,
Peter
___
Peter Gold
KnowHow ProServices
a master-page
text frame for Flow B, with Autoflow property for the right page.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages
.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/7/07, [EMAIL PROTECTED] [EMAIL PROTECTED] wrote:
I'm attempting to download and install the free trial version of
Framemaker 8 from the Adobe website. It downloads fine but during the
install process I
.
ASIDE:
Would you mind describing how you converted Quicksilver (which release) to
FM? Thanks!
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/10/07, Daya, Shetil A - Arlington, VA - Contractor
[EMAIL PROTECTED] wrote:
Morning all,
I'm using
Hi, Steve:
Have you tried applying Fill None to the number graphic in FM? This may
work when the graphics are not grouped, and may fail when they are grouped.
It's worth a try.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/12/07, Steve Rickaby [EMAIL
Hi, Steve:
Have you looked into:
* Text insets for the two-column pieces - number streams increment
* Two-column layout everywhere, with across-all column paragraph formats for
one-column layout
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/12/07
Did you try exporting to PDF? Sometimes the Fill None doesn't appear on
screen in FM, but does work in PDF.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/12/07, Steve Rickaby [EMAIL PROTECTED] wrote:
Hi Peter
Have you tried applying Fill None
into a side-head paragraph.
Perhaps the reverse approach might be worth trying - import the
single-column layouts into a two-column document.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
Sarah O'Keefe suggested a hack for this, but I've not managed to understand
be a much better
Framer-er for itG.
If the boxed insets vary in size and position, try to standardize on a
few models, and create a custom master page for each.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/18/07, Tina Ricks [EMAIL PROTECTED] wrote:
I'm working
a starting page number to each component file.
Look up the topic Page count across a book in FM Help, for the
technique to achieve page n of xx pages.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/19/07, Milan Davidovic [EMAIL PROTECTED] wrote:
I'm
,
Peter
___
Peter Gold
KnowHow ProServices
On 9/19/07, Rick Quatro [EMAIL PROTECTED] wrote:
Hi Milan,
Here is a FrameMaker solution you can try for fun (at your own risk).
Assuming you don't anticipate much page flow and you are using unstructured
FrameMaker, try
of the paragraph tags defined in a document.
Paragraph Tools is $10 for a single-user license, $100 for a site license,
and is available for FrameMaker 6.x and 7.x on Windows and Macintosh.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
got graphics and blue (hyperlinks) text. I'd like the blue
text to come out as black.
I think I need to fiddle with the Acrobat joboptions file and
postscript. But I'm not sure how.
Any ideas?
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
It's not clear if the poster wants to change only the link color, or all
color. My suggestion was based on changing only link color.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/26/07, Daya, Shetil A - Arlington, VA - Contractor
[EMAIL PROTECTED] wrote:
Hello everyone,
I wanted to know if there was a way to setup a if...,them... syntax
within FrameMaker. The reason I'm asking is that I
Hi, Rick:
While you're waiting to hear from Chris, take a look at paragraph
tools and character tools from siliconprairiesoftware.com. Very
inexpensive and useful beyond their cost.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 9/27/07, [EMAIL PROTECTED
A OR Condition B OR Condition C OR Condition D
ANDNOT Condition E
Nice, eh?
NICENOT!!! ANDNOT in HelpG
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http
, the fix doesn't require changing line widths in graphics.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
the problem page, and paste into the new
document. Then create new content for the omitted problem area in the
new document in the correct location.
TIP: You can save time by printing only the suspect page.
This exhausts my knowledge.
HTH
Regards,
Peter
___
Peter Gold
described in
Acrobat Help was to clarify the issues of very thin line widths that
occur in files; it's possibly a clue to the problem that's surfacing
in your FM files. Sorry if I was confusing.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
the character format to selected building blocks?
Can you post the TOC Reference page lines?
Thanks.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On 10/10/07, William Abernathy [EMAIL PROTECTED] wrote:
I got no response to the below post. Is this such a well-known
selected text IN the paragraphs, but
not the paragraphs themselves.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL
via the World Wide Web, visit
http://techcommpros.com/mailman/listinfo/tcp_techcommpros.com
or, via email, send a message with subject or body 'help' to
[EMAIL PROTECTED]
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http
for Adobe to begin serious development of new and
proven engineering that brings the products into the current
generation.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL
... but there IS
evolution, even if it's slower than we'd like. No competing tool set
is perfect, either, so hang in, send in feature requests, send in
requests to participate in beta programs, help push the envelope.
Peter
___
Peter Gold
KnowHow ProServices
the products because you
haven't gotten that far yet, you have a good bargaining chip for
returning the purchase for exchange.
If you'll have need down the line for creating help and tutorials, the
suite is a good idea.
Installing the complete suite is a one-step deal.
HTH
Regards,
Peter Gold
KnowHow
(using Frame 7.2)? It is removed
automatically if I use FrameMaker 8.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL
pages no longer worked. I'm not sure if the change occurred in
FM 6 or 7, or if this applies to your problem, but it's worth a bit of
search time. Perhaps other relevant topics will result.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
and figure-sequence numbers.
The table-sort method is best done after the document set is frozen,
although once it's set up, reapplying it to a newly-generated list.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You
,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http
FM,
again) if you're creating help systems, and Captivate 3 (to record
tutorials).
ID does support XML, with or without DTD, but not the same way as FM -
learning curve ahead. Also, ID doesn't currently support DITA, which
FM does.
HTH
Regards,
Peter
___
Peter Gold
.
[EMAIL PROTECTED]
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL
calibration, and standard lighting for viewing printed output?
(No rants were harmed during the creation of this question.)G
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers
all to as-is first, is a precaution to retain all
local formatting - applied with or without tags - in the selection.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On Feb 6, 2008 2:46 PM, maxwell.hoffmann
[EMAIL PROTECTED] wrote:
I have a basic, really dumb question
, footer,
and main-flow text frame. The PDF should print correctly
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
coordinates, and units. You'd need to do the math.
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com/mailman
I'm thinking. It's always good to aim high, and
persist in getting closer to that goal.
Thanks for the on-the-scene update.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers
in the TCS.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On Thu, Feb 14, 2008 at 2:51 PM, Paul Findon [EMAIL PROTECTED] wrote:
At the risk of repeating myself (ha, ha!), please tell RJ and the
team that the feature I - and the nearly 4,000 Adobe customers who've
are front matter and are not called out in
the TOC, so they should come before the TOC.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages
process like this.G
HTH
Regards,
Peter
___
Peter Gold
KnowHow ProServices
On Fri, Feb 29, 2008 at 10:33 AM, Paul Findon [EMAIL PROTECTED] wrote:
Hi Tina,
This is impossible with FrameMaker alone. I thought perhaps Spell
Catcher could handle it, as it does have
___
Peter Gold
KnowHow ProServices
On Fri, Feb 29, 2008 at 11:22 AM, Pete Rourke [EMAIL PROTECTED] wrote:
Hi Framers
Another newbie question.
On a generated index, I have a two column spread alphabetically. My problem
is trying to find the right combination of 'keep with', Widow/Orphan lines
readily-available tools.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL
both
parts btext inset into an otherwise empty container file).
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
(Level1IX, Level2IX, etc.). It's
all entries or none.
HTH
If you want
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
occurs if the paragraphs don't contain any
text (yet). So:
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list messages to [EMAIL PROTECTED]
To unsubscribe send a blank email to
[EMAIL PROTECTED]
or visit
http://lists.frameusers.com
Regards,
Peter
___
Peter Gold
KnowHow ProServices
--
p...
Regards,
Peter
___
Peter Gold
KnowHow ProServices
___
You are currently subscribed to Framers as [EMAIL PROTECTED]
Send list
I like it, too!
Simpler is usually better.
Regards,
Peter Gold
KnowHow ProServices
On undefined, [EMAIL PROTECTED] wrote:
Hi, all.
I decided not to try this one from Peter, because I received another
suggestion off-line that did exactly what I wanted. Since it was a private
mentioned it. Back in FrameMaker 6 for Mac, for some
unfathomable reason, the 'Japanese' RTF import filter worked better than the
other one.
And, yes, the French accents are no problem, either way.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
about how
to do the first without doing the second at the same time.
If it's possible to work with the authors, editing the writing is one
useful component in fitting stuff into available space.
Regards,
Peter
___
Peter Gold
KnowHow ProServices
1 - 100 of 989 matches
Mail list logo