I've been running 4.x on my desktop for months now, with the de driver ...
I've decided that since we're coming up on release, let's move up to it
(yes, I know, its not perfect yet, but its only my desktop) ...
First problem I hit was that my ethernet card wasn't detected ... from
ftp'ng down
Just got everything up, made sure that it knew how to mount my file
systems, watched it fsck those same file systems ... but as soon as it
started to install, it reported out of space errors ...
On ALT-F2, it looks like its trying to write to:
./usr/share/dict/..
instead of, what I believe its
:
On 19-Nov-2002 Marc G. Fournier wrote:
Just got everything up, made sure that it knew how to mount my file
systems, watched it fsck those same file systems ... but as soon as it
started to install, it reported out of space errors ...
On ALT-F2, it looks like its trying to write
Evening all ...
Working on getting DP2 installed on my Sony VAIO ... the fxp0 onboard, I
don't have the adapter for anymore (wires frayed), so I have a Linksys
Combo EthernetCard plugged into the PCMCIA slot ...
Booted up off of floppy, and looking at ALT-F2, it has detected the
ethernet
(linker error)
Marc G. Fournier [EMAIL PROTECTED]
Senior Systems AdministratorAcadia University
These are my opinions, which are not necessarily shared by my employer
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe
On Mon, 25 Nov 2002, Kris Kennaway wrote:
On Mon, Nov 25, 2002 at 12:11:44PM -0400, Marc G. Fournier wrote:
I just CVSup'd and rebuilt (and installed) world/kernel, just in case it
was a transient error from last week ... but same error. I know zero
about C++, but what little I know
Maybe i'm missing something that i need to load, but I took the pcm device
out of my kernel config, figuring that I could use the snd_pcm module ...
loaded it, but still can't seem to get sound? is there something else I
need to do with devfs for this, or do Ihave to compile in the pcm device?
perfect, thanks ... worked like a charm ...
On Mon, 25 Nov 2002, Daniel C. Sobral wrote:
Marc G. Fournier wrote:
Maybe i'm missing something that i need to load, but I took the pcm device
out of my kernel config, figuring that I could use the snd_pcm module ...
loaded it, but still
On Tue, 17 Dec 2002, Matthew Dillon wrote:
:
:Matt Dillon wrote:
: Thanks to my dear friend Warner Losh. I've decided to leave FreeBSD and
: flame in another project. Maybe I could join OpenBSD, the seem to share
: my views on how to deal with other people.
:
: I hereby give
Is there anyway of doing this? the boot disk is recognizing the card, but
is followed by:
device_probe_and_attach: ed1 attach returned 6
My first guess is that its conflicting with the existing fxp0 device that
was detected before it, since its sharing the IRQ, but dont' know how to
debug
On Sun, 21 Sep 2003, Doug White wrote:
On Sun, 21 Sep 2003, Sergey Matveychuk wrote:
I've installed both -current and -stable on my box. One of partition I
plan to share betwen them (place ports/distfiles there).
I newfs'ed it from -stable and wrote on it from -current. When I booted
Due to an electrician flipping the wrong circuit breaker this morning, I
had my servers go down hard ... they are all -STABLE, with one of the four
taking a *very* long time to fsck:
jupiter# ps aux | grep fsck
root 361 99.0 2.3 95572 95508 p0 R+4:21PM 121:13.21 fsck -y /dev/da0s1h
On Tue, 30 Sep 2003, Kevin Oberman wrote:
Current has two major changes re speeding up fsck.
The most significant is the background operation of fsck on file system
with soft updates enabled. Because of the way softupdates works, you are
assured of metadata consistency on reboot, so the
On Wed, 1 Oct 2003, Lukas Ertl wrote:
are either of these enhancements back-patchable to the 4.x fsck, or do
they require some non-4.x compatible changes to work?
It's not just the fsck application itself, background fsck basically needs
file system snapshots, which are only available on
Just noticed that sound isnt' working on my laptop since my last upgrade
(Oct 16), and one of our desktop's at the office is exhibiting the same
thing ...
Just CVSup new sources, and see nothing sound related having changed since
my last one, so is this an isolated thing that nobody else is
On Fri, 24 Oct 2003, Munish Chopra wrote:
On 2003-10-24 23:39 -0300, Marc G. Fournier wrote:
Just noticed that sound isnt' working on my laptop since my last upgrade
(Oct 16), and one of our desktop's at the office is exhibiting the same
thing ...
Just CVSup new sources, and see
actually, just upgraded the machine and everything appears fine now ...
what IRQ rerouting patch? )
On Sat, 25 Oct 2003 [EMAIL PROTECTED] wrote:
Hiya
I'm running:
pcm0: NeoMagic 256AV mem 0xfea0-0xfeaf,0xfe00-0xfe3f irq
9 at device 8.1 on pci0
pcm0: Asahi Kasei
G'day ...
I'm having a bugger of a time getting my laptop with a third-party
ethernet adapter installed with 5.0, since it won't properly configure the
adapter ...
what I'd like to do is build a custom boot kernel, that gets rid of
everything but what I require for that laptop, so that the
Evening ...
I found the release man page this evening, after more searching, and
understand from it that a simple:
cd /usr/src
make buildworld
cd release
make floppies
Should give me what I need ...
But, when I try, the release.9 stage gives:
atelier# make release.9
rm -rf
I'm slowly getting closer, but am not quite there yet :(
I'm at the stage where its building teh floppies, but its telling me that
the md devices are out of disk space:
if [ -d /R/stage/driversfd ]; then sh -e /usr/local/5.0/src/release/scripts/doFS.sh
/R/stage/floppies/drivers.flp /R/stage
got it ... figured out how the mfsfd/modules is generated, and just trim'd
down the driver.conf file to the bare essentials ...
On Thu, 23 Jan 2003, Juli Mallett wrote:
* De: Marc G. Fournier [EMAIL PROTECTED] [ Data: 2003-01-23 ]
[ Subjecte: make release fails building floppies
On Thu, 6 Feb 2003, John Baldwin wrote:
His board is a WV2, not a CW2. The WV2's should work fine though they
might need a BIOS update.
I can verify the WV2's ... just built a server with one of these .. can't
verify the BIOS issue, as it was upgraded before I got the machine, but
have been
: ahc_intr - referenced scb not valid during seqint 0x73 scb(147)
ach0: WARNING no command for scb 147 (cmdcmplt)
QOUTPOS=132
Marc G. Fournier [EMAIL PROTECTED]
Systems Administrator @ hub.org
scrappy@{postgresql|isc}.org ICQ#7615664
acking out the changes from the past two days and
trying again, but this was not happening a week ago.
So what's going on here?
On Sat, 7 Oct 2000, Marc G. Fournier wrote:
okay, have been watching the conversation going on in the committers list,
and am watching for any new commits
pping CPUs: 0x0002... stopped
and a trace of:
Debugger() @ +0x38
panic() @ +0xa0
ffs_valloc()@ +0xf5
ufs_makeinode() @ +0x5a
ufs_create()@ +0x28
ufs_vnoperate() @ +0x15
Marc G. Fournier [EMAIL PROTECTED]
Systems Administrator
On Mon, 9 Oct 2000, Robert Watson wrote:
On Mon, 9 Oct 2000, Marc G. Fournier wrote:
Well, I swear I have to be missing something here that is going to
make me slap my forehead, but I can't get into single user mode :(
I hit the space bar, type in 'boot -s' and it goes
On Sun, 23 Jun 2002, Martin Blapp wrote:
Very very strange ...
How recent is your CURRENT ?
Mine is :
FreeBSD 5.0-CURRENT #2: Fri May 31 09:49:38 CEST 2002
root@fuchur:/usr/ports/x11/XFree86-4-libraries# pwd
/usr/ports/x11/XFree86-4-libraries
Just upgraded my laptop to the latest -CURRENT ... everything boots fine,
but my ethernet no longer exists (it worked great on my June 6th kernel)
...
I'm using NEWCARD support in the kernel, and if_ed is loaded according to
kldstat ...
I've searched Google, and nadda there ... known problem,
Morning all ...
I'm finally trying to get my laptop back up and running using
-CURRENT ... back on August 16th, I did an upgrade that totally hosed the
ability to use my ethernet, and due to the way that I erroneously did the
upgrade, I can't go back to the old kernel :(
I've
*** Error code 2
1 error
*** Error code 2
1 error
Marc G. Fournier [EMAIL PROTECTED]
Systems Administrator @ hub.org
scrappy@{postgresql|isc}.org ICQ#7615664
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-cu
based on source code cvsup'd today:
panic+0xc8
fdrop+0x32
closef+0x9b
close+0x89
syscall+0x645
syscall_with_err_pushd+0x1b
Marc G. Fournier [EMAIL PROTECTED]
Systems Administrator @ hub.org
scrappy@{postgresql|isc}.org ICQ#7615664
Just tried to do a buildworld with a May 24th kernel and it did it there
also ...
On Sun, 27 May 2001, Marc G. Fournier wrote:
based on source code cvsup'd today:
panic+0xc8
fdrop+0x32
closef+0x9b
close+0x89
syscall+0x645
syscall_with_err_pushd+0x1b
Marc G. Fournier
= 0xccfe6000
npxproc = none
idleproc = 0xcb346a60: pid 10 idle: cpu1
Marc G. Fournier [EMAIL PROTECTED]
Systems Administrator @ hub.org
scrappy@{postgresql|isc}.org ICQ#7615664
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd
for /, if that
helps?
Marc G. Fournier [EMAIL PROTECTED]
Systems Administrator @ hub.org
scrappy@{postgresql|isc}.org ICQ#7615664
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-current in the body of the message
Logic ALC650 AC97 Codec
and, from what I can tell, the proper devices are being built in /dev, but
try and play music using xmms, and I get nothing ...
Not sure what to debug, or where ... help? :(
Thanks ...
Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
Email
On Wed, 26 Nov 2003, Melvyn Sopacua wrote:
On Wednesday 26 November 2003 01:24, Marc G. Fournier wrote:
pcm0: Intel ICH4 (82801DB) port 0xe400-0xe43f,0xe000-0xe0ff mem
0xe0102000-0xe01020ff,0xe0101000-0xe01011ff irq 17 at device 31.5 on pci0
pcm0: Avance Logic ALC650 AC97 Codec
On Wed, 26 Nov 2003, Melvyn Sopacua wrote:
On Wednesday 26 November 2003 01:24, Marc G. Fournier wrote:
pcm0: Intel ICH4 (82801DB) port 0xe400-0xe43f,0xe000-0xe0ff mem
0xe0102000-0xe01020ff,0xe0101000-0xe01011ff irq 17 at device 31.5 on pci0
pcm0: Avance Logic ALC650 AC97 Codec
On Wed, 26 Nov 2003, Melvyn Sopacua wrote:
On Wednesday 26 November 2003 19:14, Marc G. Fournier wrote:
On Wed, 26 Nov 2003, Melvyn Sopacua wrote:
On Wednesday 26 November 2003 01:24, Marc G. Fournier wrote:
pcm0: Intel ICH4 (82801DB) port 0xe400-0xe43f,0xe000-0xe0ff mem
0xe0102000
(2.2.x, apparently) ... those running newer Linux
kernels are reporting a clean run ...
Known problem?
Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
Email: [EMAIL PROTECTED] Yahoo!: yscrappy ICQ: 7615664#include stdio.h
#include sys/time.h
On Fri, 28 Nov 2003, Kris Kennaway wrote:
On Fri, Nov 28, 2003 at 09:32:30PM -0400, Marc G. Fournier wrote:
In trying to isolate an issue where the PostgreSQL 'explain analyze' is
showing odd results (namely, negative time estimates on queries), Tom
Lane wrote a quick C program to test
at the time)
neptune# uptime
7:24PM up 47 days, 6:34, 5 users, load averages: 1.98, 1.23, 0.79
neptune# ps aux | wc -l
346
Anything else that I can provide, let me know ...
Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
Email: [EMAIL PROTECTED] Yahoo
On Sat, 29 Nov 2003, Don Bowman wrote:
For this config (below), kern.timecounter.method=0 reproduces the
problem, kern.timecounter.method=1 does not.
Can anyone comment on what effect setting method to 1 has on the system?
Like, would one notice a degradation in performance?
Marc G
Over the past week, I've been trying to get information on how to fix a
server that panics with:
| panic: vm_map_entry_create: kernel resources exhausted
| mp_lock = 0101; cpuid = 1; lapic.id = 0100
| boot() called on cpu#1
Great ... but, how do I determine what 'resources' I need to
reduced my maxusers to 256 from 1024, since 1024 was
crashing worse then 512, and I ran across the 'tuning' man page that
stated that you shouldn't go above 256 :(
Just a bit more detail on the setup ...
On Sat, 20 Apr 2002, Marc G. Fournier wrote:
Over the past week, I've been trying to get
On Sat, 20 Apr 2002, Alfred Perlstein wrote:
* The Hermit Hacker [EMAIL PROTECTED] [020420 16:01] wrote:
As a quick follow-up to this, doing more searching on the web, I came
across a few suggested 'sysctl' settings, which I've added to what I had
before, for a total of:
On Sat, 20 Apr 2002, Terry Lambert wrote:
Marc G. Fournier wrote:
Over the past week, I've been trying to get information on how to fix a
server that panics with:
| panic: vm_map_entry_create: kernel resources exhausted
| mp_lock = 0101; cpuid = 1; lapic.id = 0100
| boot
On Sun, 21 Apr 2002, Terry Lambert wrote:
No, there's no stats collected on this stuff, because it's a pretty
obvious and straight-forward thing: you have to have a KVA space large
enough that, once you subtract out 4K for each 4M of physical memory and
swap (max 4G total for both), you end
On Sun, 21 Apr 2002, Terry Lambert wrote:
Marc G. Fournier wrote:
You have more memory than you can allocate kernel memory to
provide page table entries for.
The only solution is to increase your kernel virtual address
space size to accomodate the page mappings.
How to do
On Mon, 22 Apr 2002, Terry Lambert wrote:
Marc G. Fournier wrote:
On Sun, 21 Apr 2002, Terry Lambert wrote:
No, there's no stats collected on this stuff, because it's a pretty
obvious and straight-forward thing: you have to have a KVA space large
enough that, once you subtract out 4K
reading, I have a total
of 4Gig *aggregate* to work with, between RAM and swap, but its right here
that I'm confused right now ... basically, the closer to 4Gig of RAM you
get, the closer to 0 of swap you can have?
On Mon, 22 Apr 2002, Terry Lambert wrote:
Marc G. Fournier wrote:
No, there's
On Mon, 22 Apr 2002, Terry Lambert wrote:
Marc G. Fournier wrote:
First, alot of this stuff is slowly sinking in ... after repeatedly
reading it and waiting for the headache to disapate:)
But, one thing that I'm still not clear on ...
If I have 4Gig of RAM in a server, does it make
Oh, I like the netdump one ... I have a machine sitting right beside this
one that I can use to dump to ... has anyone thought to include this as a
'standard' sort of thing with FreeBSD? So that it keeps up with the
current code?
On Fri, 17 May 2002, Andrew Gallatin wrote:
There are 3
like to test with before I try it on the real thing, if at all
possible?
On Fri, 17 May 2002, Andrew Gallatin wrote:
Marc G. Fournier writes:
Oh, I like the netdump one ... I have a machine sitting right beside this
one that I can use to dump to ... has anyone thought to include
server', a vmcore gets created, but its zero length ...
thoughts?
On Fri, 17 May 2002, Andrew Gallatin wrote:
Marc G. Fournier writes:
Well, downloaded the files (a .tar.gz would be nice? *grin*) and the
client built perfectly, and kldload worked fine ... is there some way
someone
wrote:
Marc G. Fournier writes:
Okay, seem to be about halfway there ... client kldload's no problem,
server runs ... do a ctl-alt-esc to get into DDB and type panic, and it
gives a message that its looking for the server and it finds it on the
right IP ... then it prints out a '1023
I'm looking at getting a threaded Apache working under FreeBSD-STABLE (as
of this past weekend) ... if I start up the server and connect with a
browser, it doesn't send anything back, *except* if I kill the apache
server right after the connection ...
I've checked with the Apache folk, and
On Tue, 21 May 2002, Marc G. Fournier wrote:
I'm looking at getting a threaded Apache working under FreeBSD-STABLE (as
of this past weekend) ... if I start up the server and connect with a
browser, it doesn't send anything back, *except* if I kill the apache
server right after the connection
Morning all ...
Just got my Vaio Z505s upgraded to -CURRENT, in order to get my
new Surecom Ethernet PCMCIA card to work ... looked in
/etc/defaults/pccard.conf, and found the EP-427X card(s) in there, but
haven't got a clue on how to setup a similar entry for the -428X to be
Morning all ...
After getting nowhere with the Surecom EP-428X that I picked up, I
went out today and grabbed one of the Linksys EC2T, figuring it's on the
list of supported devices I found, and I think I'm s close ...
First, I'm running a VAIO PCG-Z505S ... I've upgraded
Cool, just did a reinstall of the include files and things appear to be
working much better now ... thanks :)
On Sat, 1 Jun 2002, Terry Lambert wrote:
Dan Nelson wrote:
In the last episode (Jun 01), Marc G. Fournier said:
Performed a 'make buildworld' successfully, but as soon as I
On Sat, 1 Jun 2002, Ollivier Robert wrote:
According to Marc G. Fournier:
If I run 'pccardd -f /etc/defaults/pccard.conf' from the command
line, it comes back that its matched the card, followed by a line that
states:
Try running NEWCARD instead. I had some probmem a while ago
I'm getting the following randomly while trying to do a 'make buildworld'
... library problem? Or something else that I'm not seeing?
=== gnu/lib/libstdc++
=== gnu/lib/libstdc++/doc
cd: getcwd() failed: No such file or directory
*** Error code 2
Thanks ...
To Unsubscribe: send mail to
I get this semi-randomly on my laptop when doing a delete ... softupdates
are enabled on the file system in question, and am running -CURRENT as of
last night, if any of that matters?
=== Cleaning for XFree86-font75dpi-4.2.0
rm: fts_read: No such file or directory
*** Error code 1
To
I'm running 5.0-CURRENT, with gcc 3.1:
mobile# gcc -v
Using built-in specs.
Configured with: FreeBSD/i386 system compiler
Thread model: posix
gcc version 3.1 [FreeBSD] 20020509 (prerelease)
Is this an issue with GCC 3.1, or something else I'm not thinking of ... ?
--
Line102:
stupid question, but what is the fix for the #pragma weak issue? :(
On Mon, 3 Jun 2002, Stanislav Grozev wrote:
Hello,
I have a -CURRENT system (world from yesterday, ports from today).
I'm trying to compile the XFree86-libraries-4.2.0 from ports, but
I have troubles. After resolving
Terry, I have a high speed connection over here, so if its purely a
'typing' change sort of thing, if you want to tell me what needs to be
done to fix these, I can make the changes and submit patches (I can't
login to my FreeBSD account to make the commits myself ... my key went out
of date
has any of this been reported to the XFree86 folk? I just CVSup'd the
latest XFree86 source code and this #pragma condition appears to still
exist :(
On Mon, 3 Jun 2002, Stanislav Grozev wrote:
On Mon, Jun 03, 2002 at 11:44:43AM -0300, Marc G. Fournier wrote:
stupid question, but what
On Tue, 4 Jun 2002, Stanislav Grozev wrote:
On Tue, Jun 04, 2002 at 07:08:32AM -0500, Michael D. Harnois wrote:
#pragma weak foo = bar
with either
#pragma weak foo = bar /* this is easier */
snip/
I tried the quotation mark fix, and all it does is change the error
BRARY_PATH=../../../../exports/lib cc -c -O -pipe -D_OLD_STDIO -ansi -pedantic
-Dasm=__asm -Wall -Wpointer-arith -I../../../../exports/include
-I../../../../exports/include/X11 -I../../../../include/extensions
-I../../../../extras/Mesa/src -I../../../../lib/GL/dri
69 matches
Mail list logo