"Vladimir B. Grebenschikov" wrote:
> ÷ Wed, 22.05.2002, × 23:21, Mattias Pantzare ÎÁÐÉÓÁÌ:
> > Terry, FreeBSD has no support for BGP. To get BGP support you install a
> > router daemon. That inserts routes in the routing table in the kernel. The
> > kernel will do all packet forwarding. The kernel
"This e-mail may contain confidential information and may be legally
privileged and is intended only for the person to whom it is addressed. If
you are not the intended recipient, you are notified that you may not use,
distribute or copy this document in any manner whatsoever. Kindly also
noti
--- Jay <[EMAIL PROTECTED]> wrote:
> I should also have mentioned that other ports
> install normally. I just
> finished installing unzip.
>
> Jay
>
> To Unsubscribe: send mail to [EMAIL PROTECTED]
> with "unsubscribe freebsd-current" in the body of
> the message
It seems /usr/bin/make set t
On Thu, May 23, 2002 at 02:33:56AM -0700, Shizuka Kudo wrote:
>
> It seems /usr/bin/make set the environment variable
> MAKEFILE to the Makefile it uses. So when you type
> make build or install, MAKEFILE is pointed to the
> port's Makefile. Workaround for me at this moment is
> to run "make buil
--- Marcel Moolenaar <[EMAIL PROTECTED]> wrote:
> On Thu, May 23, 2002 at 02:33:56AM -0700, Shizuka
> Kudo wrote:
> >
> > It seems /usr/bin/make set the environment
> variable
> > MAKEFILE to the Makefile it uses. So when you type
> > make build or install, MAKEFILE is pointed to the
> > port's
On Thu, 23 May 2002, Marcel Moolenaar wrote:
> On Thu, May 23, 2002 at 02:33:56AM -0700, Shizuka Kudo wrote:
> >
> > It seems /usr/bin/make set the environment variable
> > MAKEFILE to the Makefile it uses. So when you type
> > make build or install, MAKEFILE is pointed to the
> > port's Makef
В Thu, 23.05.2002, в 11:17, Terry Lambert написал:
> "Vladimir B. Grebenschikov" wrote:
> > ÷ Wed, 22.05.2002, × 23:21, Mattias Pantzare ÎÁÐÉÓÁÌ:
> > > Terry, FreeBSD has no support for BGP. To get BGP support you install a
> > > router daemon. That inserts routes in the routing table in the kerne
Hello,
I did a fresh install of 5.0-CURRENT-20020519-JPSNAP from
snapshots.jp.freebsd.org to see how it would go. The installation went
fine and so did the building and installation of world, but now I've
found a couple problems.
Is anyone doing a fix for /usr/libexec/locate.updatedb, when run
John Baldwin <[EMAIL PROTECTED]> writes:
> Actually, in DP1 psignal() might not have held it the entire time. I fixed
> that rather recently:
Oh, good then. My favorite kind of bug: the already-fixed kind :)
DES
--
Dag-Erling Smorgrav - [EMAIL PROTECTED]
To Unsubscribe: send mail to [EMAIL P
On Thu, May 23, 2002 at 03:46:01AM -0700, Shizuka Kudo wrote:
> You're right. The only reason it didn't show up
> several days before is that v 1.58 added the real path
> to MAKEFILE as mentioned in the commit log:
Try with the current make(1) sources.
--
[EMAIL PROTECTED] | C, MIPS, POSIX, UN
On Thursday 23 May 2002 07:18 am, J. Mallett wrote:
> On Thu, May 23, 2002 at 03:46:01AM -0700, Shizuka Kudo wrote:
> > You're right. The only reason it didn't show up
> > several days before is that v 1.58 added the real path
> > to MAKEFILE as mentioned in the commit log:
>
> Try with the curren
On 23-May-2002 Dag-Erling Smorgrav wrote:
> John Baldwin <[EMAIL PROTECTED]> writes:
>> Actually, in DP1 psignal() might not have held it the entire time. I fixed
>> that rather recently:
>
> Oh, good then. My favorite kind of bug: the already-fixed kind :)
Well, maybe. :) If the bug is repr
On Thu, May 23, 2002 at 09:44:45AM -0400, John Baldwin wrote:
Hi,
> > Oh, good then. My favorite kind of bug: the already-fixed kind :)
>
> Well, maybe. :) If the bug is reproducible, it would be nice to see if the
> submitter can reproduce it on current -current.
Fair enough, John, thanks f
--- Peter Schultz <[EMAIL PROTECTED]> wrote:
> Hello,
>
> I did a fresh install of 5.0-CURRENT-20020519-JPSNAP
> from
> snapshots.jp.freebsd.org to see how it would go.
> The installation went
> fine and so did the building and installation of
> world, but now I've
> found a couple problems.
>
--- Shizuka Kudo <[EMAIL PROTECTED]> wrote:
> --- Peter Schultz <[EMAIL PROTECTED]> wrote:
> > Hello,
> >
> > Try make MAKEFILE=Makefile
> >
> >
> > To Unsubscribe: send mail to [EMAIL PROTECTED]
> > with "unsubscribe freebsd-current" in the body of
> > the message
>
Or you can get the latest
In message: <[EMAIL PROTECTED]>
John Angelmo <[EMAIL PROTECTED]> writes:
: I'm using a Symbol Spectrum24 Wireless LAN PC Card
My guess is that we don't adequately support promiscuous mode on the
symbol cards.
Warner
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe fr
On Thu, 23 May 2002, John Angelmo wrote:
> Another thin I noticed is that dhclient went nuts and started to use 100% CPU untill
>I killed it.
Yes - this issue is known about. There are two patches on the stable list
posted last friday, both of which fix the issue for me.
Gavin
To Unsubscribe
On Thu, May 23, 2002 at 02:28:06PM +0900, NAKAJI Hiroyuki wrote:
> I have trouble that f77 cannot find -lfrtbegin which gcc-3.1 has.
> For example, the program shown below cannot be linked.
I'll look into this.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in
Hi peoples..
I'm looking to share a romm at usenix (the bargain
rate of $130/night indicates that some people have a very different
idea of a bargain to me)
Julian
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
Hi!
I had a vinum mirrored volume usr
with two plexes usr.p0 and usr.p1, with respective
subdisks usr.p0.s0 and usr.p1.s0.
So recently one of the disks crashed. I tried to replace the disk with
another one (which later appeared to be somewhat smaller) and run
vinum create for a new disk. Beca
On Thu, 23 May 2002, Julian Elischer wrote:
> I'm looking to share a romm at usenix (the bargain
> rate of $130/night indicates that some people have a very different
> idea of a bargain to me)
I have an open space, arriving the 12th.
Doug White| FreeBSD: The Power to Serve
yuri khotyaintsev <[EMAIL PROTECTED]> wrote:
> so now I have
> usr.p0 -> 1 subdisk (usr.p0.s0)
> usr.p1 -> 0 subdisk
> I have no possibility to get new large disk now.
> Should I try to remove plex usr.p1 ?
Yes, I think so. Perhaps you need to detach it before (most likely).
--
cheers, J"or
On Thursday, 23 May 2002 at 21:44:52 +0200, yuri khotyaintsev wrote:
> Hi!
>
> I had a vinum mirrored volume usr
> with two plexes usr.p0 and usr.p1, with respective
> subdisks usr.p0.s0 and usr.p1.s0.
>
> So recently one of the disks crashed. I tried to replace the disk with
> another one (which
> I have no possibility to get new large disk now.
> Should I try to remove plex usr.p1 ?
>
Sounds like it's related to a problem I encountered with vinum
some time ago. For me, vinum would bail out in panic if I tried
to access an area of a volume that was not initialized on the
mirrored plex. T
[ was on hackers, no reply ]
And this has also affected iconv.h.
I would suggest very strongly that this must be backed out.
-- Forwarded message --
Date: Thu, 23 May 2002 15:17:32 -0700 (PDT)
From: Matthew Jacob <[EMAIL PROTECTED]>
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
S
On Thu, May 23, 2002 at 12:18:59PM +, J. Mallett wrote:
> On Thu, May 23, 2002 at 03:46:01AM -0700, Shizuka Kudo wrote:
> > You're right. The only reason it didn't show up
> > several days before is that v 1.58 added the real path
> > to MAKEFILE as mentioned in the commit log:
>
> Try with t
I'd be interested to know if any other -current users with a
G200 AGP are having problems.
-Seth
To Unsubscribe: send mail to [EMAIL PROTECTED]
with "unsubscribe freebsd-current" in the body of the message
On 24-May-2002 (04:12:16/GMT) Seth Hettich wrote:
> I'd be interested to know if any other -current users with a
> G200 AGP are having problems.
Only many months ago, when running moused before starting X
(either from xdm/wdm or startx) forced mouse pointer in the
upper right corner. But not no
You sent to user [EMAIL PROTECTED] message with VIRUS .
==
AVP Report:
==
suspicion: Exploit.IFrame.FileDownload
border.exe infected: I-Worm.Klez.h
==
Bye !
To Unsubscribe:
--- Begin Message ---
(Forwarded for Kirk:)
> I am looking for folks that are willing to try out the changes
> for UFS2. A set of diffs (relative to -current as of May 20th)
> is available at http://www.freebsd.org:~mckusick/UFS2.tar.gz.
> The tarball contains a single directory `UFS2' which is
31 matches
Mail list logo
