Op zondag 3 augustus 2003 01:50, schreef Benjamin Walkenhorst:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Saturday, 2. August 2003 22:35, Daan Goedkoop wrote:
Hello,
On my IDE disk, I have two disk labels, one of FreeBSD and one from
NetBSD. Now that I want to change to NetBSD, I
On 01.08.2003 05:00, Erik Trulsson wrote:
On Thu, Jul 31, 2003 at 10:30:57PM -0400, Chuck Swiger wrote:
[...]
problem of compiling the system with cc -O2 resulting in a buggy kernel.
If you determine that compiling with cc -O -fgcse results in failures,
[...]
There is an open bug report in
Frank Jahnke wrote:
I'm writing you this message for assistance in getting my mouse wheel to
work with X11. Yes, another one of these requests. I have been through
the documentation (and numerous articles on the web) and yet I still
cannot get it to work.
I am running BSD 4.8 with XFree86 v4.3.0
Hi All,
I'm trying to work out a good way of stopping one process flooding the
I/O. Basically I have a multuple user machine and would like to try to
stop one person taking it down...
Thanks
Rus
--
w: http://www.jvds.com | Linux + FreeBSD VDS's from $15/mo
e: [EMAIL PROTECTED]|
Hi Everyone,
I tried to install portupgrade from the ports today and it failed with
the below error. I tried some other ports and it would seem I can't
build anything at all, they all failed with the `free' undeclared here
(not in a function) error.
Has anyone seen this error before?
Thank you
Hi,
I have:
//pref/pref /pref smbfs rw,noauto 0 0
in my /etc/fstab and it works, but I have to press
the return key to submit the empty password when I
mount /pref and thus I have to use the noauto option.
I there a way to put the mount_smbfs option -N and
also -E koi8-r:cp866 into the
Hi,
I have a dual-boot PC and would like to mount the
OpenBSD partition (with 3 slices: root, swap and
/home) on the hard disk ad1 under FreeBSD 5.1.
However there are only 2 ad1 devices visible:
newhope:alex {264} ll /dev/ad1*
crw-r- 1 root operator4, 12 Aug 3 09:50
On Sun, Aug 03, 2003 at 09:01:54PM +1000, Chris Richards wrote:
Hi Everyone,
I tried to install portupgrade from the ports today and it failed with
the below error. I tried some other ports and it would seem I can't
build anything at all, they all failed with the `free' undeclared here
(not
On Sat, Aug 02, 2003 at 06:37:24PM +0200, Grzegorz Czaplinski wrote:
Date: Sat, 2 Aug 2003 18:37:24 +0200
From: Grzegorz Czaplinski [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Subject: Default ACL entries.
Hi there!
Does anyone know how to set default ACL entries?
Any examples how to use -d, -k, -X
Alexander Farber said:
Hi,
I have:
//pref/pref /pref smbfs rw,noauto 0 0
in my /etc/fstab and it works, but I have to press
the return key to submit the empty password when I
mount /pref and thus I have to use the noauto option.
I there a way to put the mount_smbfs option -N and
Constantine,
I believe you can just add an entry to /etc/hosts to specify the hostname
for your box. Something like:
192.168.0.2 constantine constantine.domainname.com.
Just make sure your sytstem is searching the hosts file before DNS (in
/etc/host.conf, hosts is above bind).
Richard Johannesson [EMAIL PROTECTED] writes:
Using sysinstall, was going to install emacs and kde.
Install failed on installing imake. The error I got
Was Add of package imake-4.3.0 aborted, error code 1
- Please check the debug screen for more info.
, then got Loading of dependent
[EMAIL PROTECTED] writes:
I'm a newbie of freebsd (I used linux for a couple of years),I had just
assembled my new computer (Gigabyte 7VAXP with athlon XP2500+ ), I installed
a 5.0 release and is working fine and I'd like to know if I can set the
kernel to support usb 2.0 or I have to install
mess-mate [EMAIL PROTECTED] writes:
some questions from a newbie :
1.How can I create a bootable floppy after the installation of
rel 5.1 ?
I'm not running 5.x yet, but in earlier versions I believe I've just
used the install (kernel) floppy with a modified loader.rc.
The FreeBSD slice is
Is anyone else seeing regular freezes with Opera 7.11
with 4.8-STABLE in ordinary browsing (i.e., not
flash, not anything special)? I think I'm seeing
more frequent freezes or core dumps than
in the 6 series, including ones that lock the OS
itself, and wonder whether this is a common or
known
On Sun, Aug 03, 2003 at 11:28:43AM -0400, Don Tyson wrote:
Is anyone else seeing regular freezes with Opera 7.11
with 4.8-STABLE in ordinary browsing (i.e., not
flash, not anything special)? I think I'm seeing
more frequent freezes or core dumps than
in the 6 series, including ones that
---BeginMessage---
On Sun, 2003-08-03 at 03:00, Ryan Merrick wrote:
Frank Jahnke wrote:
Uncomment this line in your XF86Config
#Option ZAxisMapping 4 5
The imwheel port is more or less intergrated into the X11 since 4.2. I
dont have it installed and the wheel works great in
HI
I have previously emailed
[EMAIL PROTECTED] over problems with
regard to what gets classified as excessive bounces. As a
result of which I repeatedly get removed from the list. On
each occasion I receive an email that tells me I have been
temoved due to excessive bounces. That email quotes a
On Sun, 3 Aug 2003, Rus Foster wrote:
Hi All,
I'm trying to work out a good way of stopping one process flooding the
I/O. Basically I have a multuple user machine and would like to try to
stop one person taking it down...
Hi!
You will basically use login.conf to put user in user classes
Now I get this from the moderators !
strange
- Original Message -
From: [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Sunday, August 03, 2003 10:00 AM
Subject: Your message to moderators awaits moderator
approval
Your mail to 'moderators' with the subject
Something is wrong here
Hi,
I'm running XF86 on freebsd 5.1. I would like to get at least 85Hz in 1152x864
on my Nokia 447Xi Monitor. I've set HV values in xfconfig (30-92, 50-150) but
it still working on just 75Hz (default?). I've been experimenting with xvidtune for a
while but I supose there is some better way to
OK, I commented out the moused references from /etc/rc.conf, and changed
XF86Config to psm0 from sysmouse and enabled ZAxisMapping. It worked --
even without imwheel! That's a great improvement -- thank you!
Still, is there any way to get the mouse to work in X11 with moused?
I'd really like
Hi all,
Running on the FreeBSD 4.8-STABLE i386 with a following setup:
[EMAIL PROTECTED]:~$ ls -la /workspace/mus/ | grep big
drwxr-xr-x 2 apog wheel 512 Jun 6 15:00 big
[EMAIL PROTECTED]:~$ grep big /etc/fstab
ls3610:/home/d038533/mus /workspace/mus/big nfs ro,noauto 0 0
The same thing happens to me occasionally.
My diagnosis is this:
* my MTA (exim) is set to reject junk mail.
* freebsd list gets spammed with junk mail reasonably frequently
* my MTA refuses the junk from the list
* FreeBSD mailing system cuts me off because I have rejected the
junk/spam which
Hi! I am pretty new to FreeBSD, however, I do really enjoy useing it, its a GREAT
server platform. Anyway, on to my question. I for the life of me can't figure out
how to update my system. Everything I read REALLY confuses me. I was hopeing it
would be something as simple as emerge world or
On Sun, 3 Aug 2003, Eric Murphy wrote:
Hi! I am pretty new to FreeBSD, however, I do really enjoy useing it,
its a GREAT server platform. Anyway, on to my question. I for the life
of me can't figure out how to update my system. Everything I read
REALLY confuses me. I was hopeing it would
Erik Trulsson wrote:
On Sat, Aug 02, 2003 at 03:52:25PM -0400, Chuck Swiger wrote:
[ ... ]
That wasn't my real point anyway. I was trying to refute your statement
that Even if the code contains a bug, cc -O and cc -O -fgcse
should produce the same results.
I claim that if the code has a bug that
Hi Frank,
Thx for the advice and I trying to implement what you advice me to do. I also
consulted the README.Linux, after I found it(Long day...). Now I think I got the
basic idee of it down, but I seem not to be able to get both screens started. TV or
Monitor. In the attachement you'll
Hi All,
Just want a sanity check. I want to load the jailfsstat module at boot
time so I've done
vi /boot/loader.conf
added
jailfsstat_load=YES
Is that right?
Cheers
RUs
--
w: http://www.jvds.com | Linux + FreeBSD VDS's from $15/mo
e: [EMAIL PROTECTED]| Totally Customizable
How to i set my serial line interface to use SLIP protocol instead of
CSLIP? I use the commands slattach -h -l -s 19200 /dev/cuaa0 and
ifconfig sl0 192.168.2.2 192.168.2.3 netmask 255.255.255.0. When I run'
netstat or ifconfig -a, i get the interface using pointtopoint, i dont see
where the
I have the disks for freeBSD 5.0 and am quite anxious to use it.
Is it possible to run Win98, SuSE and a third operating system freeBSD
5.0 on one drive? If so are there any particular techniques required?
Will there be any printer and modem issues, perhaps there is a web site
which discusses
Hi all,
After not being able to get sound to work under 4.8
with a Ensoniq sound card, I tried using a ESS Solo-1E
card. Still no sound. (Though the keyboard beep
still functions.)
As I had said originally, this is all new to me so
there may be something fundamental I'm doing wrong.
I have
On Sun, 2003-08-03 at 17:25, Walter wrote:
Hi all,
After not being able to get sound to work under 4.8
with a Ensoniq sound card, I tried using a ESS Solo-1E
card. Still no sound. (Though the keyboard beep
still functions.)
As I had said originally, this is all new to me so
there may be
Joe Marcus Clarke wrote:
Try running mixer, and see if vol or pcm is set to 0.
Sorry I neglected to mention that - I had already checked
that at the previous advise from this List. It is set at
75:75 for each and when I set it to 100:100 it makes no
difference.
Walter
Hi, when i try to install Freebsd 5.0 on my new computer
with ASUS P4S8X motherboard
it hangs during booting at
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting device
i know someone else had this problem before, but has this problem been fixed yet?
thanks
Hi!
I have an IBM Aptiva 2137-E30, from which I would like run FreeBSD. To
start with I wanted the 4.8 version, but now I think I'll pretty much
take anything that works. The PC comes with a bootable CDROM drive,
which will boot your Microsoft Windows installation CDs (have tried with
w2k and
If your external IP number changes, as with DHCP, is there a way
to find out what it currently is? I was thinking you could keep
BitchX logged into a chat channel and script a /dns yournick and
email yourself the results from time to time.
How would you do it?
--
David S. Jackson
On Sun, Aug 03, 2003 at 06:13:18PM -0400, David S. Jackson wrote:
If your external IP number changes, as with DHCP, is there a way
to find out what it currently is? I was thinking you could keep
BitchX logged into a chat channel and script a /dns yournick and
email yourself the results from time
Somewhere around the time of 08/03/2003 15:13, the world stopped and
listened as David S. Jackson spoke these words of wisdom...:
If your external IP number changes, as with DHCP, is there a way
to find out what it currently is? I was thinking you could keep
BitchX logged into a chat channel and
List,
I'm sending this summary of my efforts to get the wheel mouse to work in
FreeBSD 4.8 and XFree86 4.3. I sent along a couple of messages earlier,
but they seemed to get muddled...
There are two ways to get the wheel mouse to work. I have succeeded
only if X11 does the translations, but
The same thing happens to me occasionally.
My diagnosis is this:
* my MTA (exim) is set to reject junk mail.
* freebsd list gets spammed with junk mail reasonably frequently
* my MTA refuses the junk from the list
* FreeBSD mailing system cuts me off because I have rejected the
On Sun, Aug 03, 2003 at 09:54:39AM -0700, vizion communication wrote:
HI
I have previously emailed
[EMAIL PROTECTED] over problems with
regard to what gets classified as excessive bounces. As a
Mail problems should be reported to [EMAIL PROTECTED]
Kris
pgp0.pgp
Description: PGP
Does anyone know how to get nvidia's SoundStorm (nforce2 audio) to work
under FreeBSD?
~Rik
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
How would I disable the tips that appear when you login.
_
Add photos to your e-mail with MSN 8. Get 2 months FREE*.
http://join.msn.com/?page=features/featuredemail
___
[EMAIL
On Sun, Aug 03, 2003 at 08:53:13PM -0400, Gregory Felter wrote:
How would I disable the tips that appear when you login.
Comment out:
# [ -x /usr/games/fortune ] /usr/games/fortune -s
in your .login or .profile.
--
Jonathan Chen [EMAIL PROTECTED]
In the last episode (Aug 03), Frank Jahnke said:
Moused Translations.
Alas, this does not work yet. I'm still setting up FreeBSD, so I am
spending a LOT of time editing configuration files, particularly for
X. I do most of these in the console window; I'd really like to keep
the mouse
Thanks, for all. And... i have another question!
On 3rd subnet that must be used for internet connection(192.168.0.x) have a
small Internet Server (DLink - 192.168.0.1) who listening for http
connections (192.168.0.0/24 Dial on Demand) and have NAT, FreeBSD gateway is
on 192.168.0.2. What I want
I have two PC, a PIII 700 and a P100 (with only 24meg RAM). I would like to
use
the faster PC for doing make buildworld and make buildkernel KERNCONF=XYZ.
Then somehow do the install onto the slower PC. The slower PC is running as
a
router and httpd server. The faster PC is running very a
David S. Jackson [EMAIL PROTECTED] writes:
If your external IP number changes, as with DHCP, is there a way
to find out what it currently is? I was thinking you could keep
BitchX logged into a chat channel and script a /dns yournick and
email yourself the results from time to time.
How
Hi! I am pretty new to FreeBSD, however, I do really enjoy useing it, its a
GREAT server platform.
It makes a pretty darn good desktop too. :-)
Anyway, on to my question. I for the life of me can't figure out how to
update my system. Everything I read REALLY confuses me. I was hopeing it
When using yppasswd to change a user password, rcp.yppasswdd failed in two ways:
change passwd from root on NIS server:
--- server syslog messages -
passwd: in pam_sm_chauthtok(): yppasswd_local(): failed to connect to rpc.yppasswdd:
nis.server.$DOMAIN: RPC: Program not registered
On Sun, Aug 03, 2003 at 11:02:19PM -0400, Lowell Gilbert wrote:
David S. Jackson [EMAIL PROTECTED] writes:
If your external IP number changes, as with DHCP, is there a way
to find out what it currently is? I was thinking you could keep
BitchX logged into a chat channel and script a /dns
In the last episode (Aug 03), Jin Guojun said:
When using yppasswd to change a user password, rcp.yppasswdd failed in two ways:
change passwd from root on NIS server:
--- server syslog messages -
passwd: in pam_sm_chauthtok(): yppasswd_local(): failed to connect to rpc.yppasswdd:
On Sun, Aug 03, 2003 at 10:47:36PM -0500, Joey Mingrone wrote:
Hi! I am pretty new to FreeBSD, however, I do really enjoy useing it, its
a GREAT server platform.
It makes a pretty darn good desktop too. :-)
Anyway, on to my question. I for the life of me can't figure out how to
update
Bob Hall [EMAIL PROTECTED] writes:
On Sun, Aug 03, 2003 at 11:02:19PM -0400, Lowell Gilbert wrote:
David S. Jackson [EMAIL PROTECTED] writes:
If your external IP number changes, as with DHCP, is there a way
to find out what it currently is? I was thinking you could keep
BitchX
Hi there
Our company has inherited/bought an ISP outfit which has around 2
million subscribers. Among our first priority is to upgrade the DNS
service which has been abysmal according to the users
Can someone give me a head-start on a recommended configuration for such
DNS outlay which serves
Why then does the notification of bounces ask me to email
[EMAIL PROTECTED] if there are any
queries
Instructions:
Your membership in the mailing list freebsd-questions has
been
disabled due to excessive bounces The last
On Sun, Aug 03, 2003 at 09:56:18PM -0700, vizion communication wrote:
Why then does the notification of bounces ask me to email
[EMAIL PROTECTED] if there are any
queries
Ask postmaster
Kris
pgp0.pgp
Description: PGP signature
On Mon, Aug 04, 2003 at 12:21:59AM -0400, Lowell Gilbert wrote:
Bob Hall [EMAIL PROTECTED] writes:
On Sun, Aug 03, 2003 at 11:02:19PM -0400, Lowell Gilbert wrote:
David S. Jackson [EMAIL PROTECTED] writes:
If your external IP number changes, as with DHCP, is there a way
to find
Has any body managed to get mplayer to work with the realaudio sipro codec?
So far I have tried...
audiocodec rasipr
info RealAudio Sipro
status working
60 matches
Mail list logo
