Hello list...
I have a few questions I would like to ask. Some may sound stupid, but
please bear with me since I'm new to FreeBSD and networking for that
matter...
So, I'm trying to build this router/firewall thingy for our local
network. The box has 3 NIC's, one for the Internet and two for the
Hi,
We configured a dhcpd.conf as following.
-
ddns-update-style interim;
ignore client-updates;
option space PXE;
option PXE.mtftp-ip code 1 = ip-address;
At 01:16 AM 7/8/2005, thai nguyen wrote:
Hi,
We configured a dhcpd.conf as following.
-
ddns-update-style interim;
ignore client-updates;
option space PXE;
option PXE.mtftp-ip
Hi there,
Does anyone know of a company in Johannesburg, South Africa that
provides FreeBSD training courses?
There is a fortune of FreeBSD documentation and books available on the
web and could probably learn all there is to know in that manner.
However, my Boss is keen to throw some
On 2005-07-07 20:20, Drew Tomlinson [EMAIL PROTECTED] wrote:
I'm trying to copy an entire file system while using an exclude file
to avoid copying things such as /dev, /proc, etc. I've read the man
page and found the -X or --exclude-from tar option. I've create a
file called /exclude.list.
You are not a member of this mailing list [EMAIL PROTECTED].
If you know the general guide of this list, please send mail with
the mail body
guide
to the address
[EMAIL PROTECTED]
where guide is equal to GUIDE for case insensitive.
On 7/8/05, Gavin McDougall [EMAIL PROTECTED] wrote:
Hi there,
Does anyone know of a company in Johannesburg, South Africa that
provides FreeBSD training courses?
There is a fortune of FreeBSD documentation and books available on the
web and could probably learn all there is to know in
I plan on running a 486 I found laying around as a
freebsd box. It only has a floppy, and yes, it's a
486. It does have 500 meg hard disk and 20 megs of ram
though. Any ideas as to what is realistic to expect
out of this machine? I plan to run it as a CLI box
only to learn perl, python, C++ and
i have on my hard disk two OS. freebsd and win2k
i reinstalled the win2k and upon booting i made the
partition with the freebsd active.
but now i can only have access to freebsd.
my win2k which i know is still there doesn't
get to load since freebsd boot0 doesn't register it.
i have tried to ways
I guess I'm failing to see the point of writing to the log faster. If
you need real time stats, use tcpdump -n -e -ttt -i pflog0. If you
want to get say the last 1000 entries in the log and then go to
realtime, use: sudo tcpdump -n -e -tt -c 1000 -r /var/log/pflog sudo
tcpdump -n -e -ttt -i
On 7/8/05, Cecil [EMAIL PROTECTED] wrote:
I plan on running a 486 I found laying around as a
freebsd box. It only has a floppy, and yes, it's a
486. It does have 500 meg hard disk and 20 megs of ram
though. Any ideas as to what is realistic to expect
out of this machine? I plan to run it as a
On 7/7/05, Drew Tomlinson [EMAIL PROTECTED] wrote:
I'm trying to copy an entire file system while using an exclude file to
avoid copying things such as /dev, /proc, etc. I've read the man page
and found the -X or --exclude-from tar option. I've create a file
called /exclude.list. It
To all gurus out there,
Please help me. I am installing FreeBSD 5.4 RELEASE for AMD64 using
socket 754 MSI K8MNE0-V mainboard and AMD 64 3000+ CPU and encountered
this error during the base installation. It says write failure
transfer! (wrote -1 bytes of 1425408 bytes). It always happens
Hello.
I am trying to configure a FreeBSD box to serve
as a ppp server for a Windows box.
I have to use a null-modem cable with only
RxD/TxD/GND.
Here is my ppp.conf for userland ppp:
default:
set log ...
ident ...
direct0:
set device /dev/cuaa0
set speed 19200
set timeout 0
set
Hello.
I am trying to configure a FreeBSD box to serve
as a ppp server for a Windows box.
I have to use a null-modem cable with only
RxD/TxD/GND.
Here is my ppp.conf for userland ppp:
default:
set log ...
ident ...
direct0:
set device /dev/cuaa0
set speed 19200
set timeout 0
set
Brian Duke wrote:
libtool15: link: CURRENT `1000' is not a nonnegative integer
http://lists.freebsd.org/pipermail/freebsd-questions/2005-May/087588.html
If that doesn't work then try uninstalling libtool3 and forcing
re-installation of libtool5.
You don't look like you use portupgrade
PSpice and Candence are the only circuit simulators that I know of with
GUIs, and PSpice is for Windows only where I think that Cadence requires
purchasing a license (not sure though... look for Cadence on google). I
will say that Cadence is a powerful extension of Spice though.
-Garrett
On
Dmitry Mityugov wrote:
On 7/8/05, Cecil [EMAIL PROTECTED] wrote:
I plan on running a 486 I found laying around as a
freebsd box. It only has a floppy, and yes, it's a
486. It does have 500 meg hard disk and 20 megs of ram
though. Any ideas as to what is realistic to expect
out of this machine?
Cecil wrote:
I plan on running a 486 I found laying around as a
freebsd box. It only has a floppy, and yes, it's a
486. It does have 500 meg hard disk and 20 megs of ram
though. Any ideas as to what is realistic to expect
out of this machine? I plan to run it as a CLI box
only to learn perl,
Ultimate wrote:
Obviously, I am a newbi ... so further illustration
with the solution would be appreciated
1) Do as root sysctl kern.geom.debugflag=16
2) Start sysinstall
3) Go Configure-FDISK- OK - Q
4) It will ask if you wish boot manager
5) Select BootMgr
If it is only for cli
and learning programming,
I'd suggest to install FreeBSD 4.11.
All you need (gcc, perl, python, vim/emacs)
is readyly available from
the original install cd #1.
I had a comparable box running as
a samba fileserver under FreeBSD and
even could run a make world
on it.
You
Deyan Dyankov wrote:
I'm not sure that this is the problem, but ..keep in mind, that ssh
encrypts the data and ftp doesn't.
The delay might be actually the time for encryption, right?
Yes, this is a possibility, and I'll revisit it tonight. I thought I'd
looked at the CPU usage during
Hi all,
I'm afraid I must show my extreme ignorance. Using FreeBSD 5.4 I've created
a log-in that starts a script I created
#!/bin/sh
mysql -u username -ppassword
It works fine. I get motd, then the mysql prompt. When I type the quit
command I lose my SSH connection which is great!
On 7/8/05, Daniel Auman [EMAIL PROTECTED] wrote:
Hi all,
I'm afraid I must show my extreme ignorance. Using FreeBSD 5.4 I've created
a log-in that starts a script I created
#!/bin/sh
mysql -u username -ppassword
Are you says that you have the password hardcoded into your
HI Igor,
when i follow your instruction
i still do get the error below:
ERROR: Unable to write data to disk ad0!
--100%--
[OK]
[Press enter or space]
and
Disk partition write returned an error status!
-100%--
Ultimate wrote:
Disk partition write returned an error status!
-100%--
[OK]
[Press enter or space]
kern.geom.debugflags=16
of course (missing 's' at end of kern.geom.debugflags)
___
Daniel Auman wrote:
#!/bin/sh
mysql -u username -ppassword
User just can do \! /bin/sh at mysql prompt and get shell access.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
thanks a billion Man
You fixed my headache!!!
You are the man.
Poeple, this stuff works
its real good stuff
--- Igor Robul [EMAIL PROTECTED] wrote:
Ultimate wrote:
Obviously, I am a newbi ... so further illustration
with the solution would be appreciated
1) Do as root sysctl
Evening.
We are downloading an item to a freebsd 5.3 server which has a size a
little short of the max size of the HD. For technical reasons there is
no way to remove portions of the item before it is finished.
There is enough space but only if the 8% reserved for root is taken
into
steve lasiter [EMAIL PROTECTED] writes:
Please get DSS-v5_0_3_2.zip from
http://developer.apple.com/darwin/project/streaming/
And you must accept the APSL. Then, put in
/usr/ports/distfiles/DDS-v5_0_3_2.zip
Add an s to project. As in:
http://developer.apple.com/darwin/projects/streaming/
On Friday 08 July 2005 07:37 am, Elliot Crosby-McCullough wrote:
Evening.
We are downloading an item to a freebsd 5.3 server which has a size a
little short of the max size of the HD. For technical reasons there is
no way to remove portions of the item before it is finished.
I am looking for the best way to redirect request
on a specific port. Baiscally all I want to do
is when a connection is made to a port, say 5000,
send that request out through another port, say 2000,
on the other interface. Any ideas?
--
Bob Bomar
[EMAIL PROTECTED]
I'm using PF, and have this which works like a champ
rdr on $public proto tcp from any to any port 3389 - 1.2.3.4 port 3389
rdr on $public proto tcp from any to any port 3390 - 1.2.3.5 port 3389
pass in on $public proto tcp from any to any port {3380:3390} keep state
On 7/8/05, Bob Bomar
On Fri, Jul 08, 2005 at 11:43:55AM -0400, Hornet wrote:
I'm using PF, and have this which works like a champ
rdr on $public proto tcp from any to any port 3389 - 1.2.3.4 port 3389
rdr on $public proto tcp from any to any port 3390 - 1.2.3.5 port 3389
pass in on $public proto tcp from any
On 08/07/05, Alex Zbyslaw [EMAIL PROTECTED] wrote:
Unfortunately there seems to be no way to turn off the encryption for
SSH, which would be the easiest test.
Well, looking at /usr/src/crypto/openssh/cipher.c, there is a none
in struct Cipher. But specifying 'none' in Ciphers in sshd_config, I
Give ME a break. You're only stating the obvious: the more
daemons are running, the more exposure. This particular box
is running BIND 8, a transparent Squid proxy, and SSH. BIND
is sandboxed and Squid is running as a nonprivileged user.
Squid is also set not to take requests from outside.
I
Then change from any to any to from any to $intreface1 I think
that is the syntax.
On 7/8/05, Bob Bomar [EMAIL PROTECTED] wrote:
On Fri, Jul 08, 2005 at 11:43:55AM -0400, Hornet wrote:
I'm using PF, and have this which works like a champ
rdr on $public proto tcp from any to any port 3389 -
On 07/07/05, Alex Zbyslaw [EMAIL PROTECTED] wrote:
Does anyone have a clue what might be going on?
Dunno, but you might take a look at /usr/ports/security/hpn-ssh/:
--- pkg-descr ---
High Performance Enabled SSH/SCP
from the Pittsburgh Supercomputing Center
hpn-ssh is a version of OpenSSH
When I logon, my $SHELL is /bin/sh, but when I use 'su root' to do some
confige, the system told me :
$ su
su: Sorry
I found out the su command location with the following :
$ which su
/usr/bin/su
Anybody help me to figure out the problems ? thanks!
At 05:32 PM 7/7/2005, J65nko BSD wrote:
If you would have installed something like tripwire or aide, you would have
been in a better position to find out whether the box has been owned.
I didn't build the machine.
--Brett Glass
___
When I logon, my $SHELL is /bin/sh, but when I use 'su root' to do some
confige, the system told me :
$ su
su: Sorry
I found out the su command location with the following :
$ which su
/usr/bin/su
Anybody help me to figure out the problems ? thanks!
Is your id in the 'wheel'
hi
i found the posts above while searching freebsd's mailinglists
i've exactly the same pb with freebsd 5.4 and netgear WG311T
did you find any solution ??
i don't really want to upgrade to 6.0 and i'm not sure it will solve the
pb :(
otherwise i could buy another wireless card (i can give mine
On 7/8/05, Brett Glass [EMAIL PROTECTED] wrote:
Give ME a break. You're only stating the obvious: the more
daemons are running, the more exposure.
Brett say hello to my insta-trash filter.
Get a hair cut you damn hippie
http://www.ymmv.com/gifs/brett.gif
This particular box
is running BIND
I'm trying to install 5.4 on a system that currently has 4.10 on it. My
problem is that when the system boots from the install disk 1 I cannot
see the initial menu due to a display problem.
I see the initial boot information then the box that should have the
selection options in, but without
Hello list,
I've just installed a new 5.3 server and I have setup ntpd. When I start the
daemon I get this error msg:
Wintermute ntpd[512]: Frequency format error in /var/db/ntpd.drift
Here is my ntp.conf:
Driftfile /var/db/ntpd.drift
Server pool.ntp.org
Server pool.ntp.org
Server
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Elliot Crosby-McCullough
Sent: Friday, July 08, 2005 7:37 AM
To: freebsd-questions@freebsd.org
Subject: Root 8% reserved space and tunefs
Evening.
We are downloading an item to a
I got something from Igor which worked
1) Do as root sysctl kern.geom.debugflags=16
2) Start sysinstall
3) Go Configure-FDISK- OK - Q
4) It will ask if you wish boot manager
5) Select BootMgr
--- Garrett Cooper [EMAIL PROTECTED] wrote:
Ultimate wrote:
# fdisk -l
fdisk: illegal
When I logon, my $SHELL is /bin/sh, but when I use 'su root' to do some
confige, the system told me :
$ su
su: Sorry
I found out the su command location with the following :
$ which su
/usr/bin/su
Anybody help me to figure out the problems ? thanks!
I am looking for the best way to redirect request
on a specific port. Baiscally all I want to do
is when a connection is made to a port, say 5000,
send that request out through another port, say 2000,
on the other interface. Any ideas?
--
Bob Bomar
[EMAIL PROTECTED]
Hi All,
I am trying to sort a tab delimited file with sort. The problem I am
having is with the -t option. I can not get it to accept a tab.
Things I have tried:
sort -t \t
sort -t '\t'
sort -t \t
sort -t 0x09
sort -t '0x09'
sort -t 0x09
sort -t ^I
sort -t '^I'
sort -t ^I
Any suggestions
How to get the best results from FreeBSD questions.
===
Last update $Date: 2004/09/19 02:40:48 $
This is a regular posting to the FreeBSD questions mailing list. If
you got it in answer to a message you sent, it means that the sender
thinks that
The trouble with books is that you can't update them the way you can a web page
or any other online documentation. The result is that most leading edge
computer books are out of date almost before they are printed. Unfortunately,
The Complete FreeBSD, published by O'Reilly, is no exception.
How to creata a second locate database for private use?
(mp3 database or so).
I have tried
$ locate -U dir_with_mp3s -o database.dtb
Searching in this database doent work
$ locate -d database.dtb somesong.mp3
gives no result.
The database exists and it looks ok, seems to be a simple
ascii format.
On 07/08/05 09:51 AM, Daniel Malaby sat at the `puter and typed:
Hi All,
I am trying to sort a tab delimited file with sort. The problem I am
having is with the -t option. I can not get it to accept a tab.
Things I have tried:
sort -t \t
sort -t '\t'
sort -t \t
sort -t 0x09
sort -t
At 11:15 7/8/2005, Shawn Wall wrote:
Hello list,
I've just installed a new 5.3 server and I have setup ntpd. When I start the
daemon I get this error msg:
Wintermute ntpd[512]: Frequency format error in /var/db/ntpd.drift
Here is my ntp.conf:
Driftfile /var/db/ntpd.drift
Server
Hi,
I just had setup a FreeBSD server to do some monitor on bandwidth and
IDS on a passive port in my switch (a span port), so i'm doing some ipfw
rules to connect with rrdtool and get some graphs of traffic by tcpports
and this kind of stuff, but all packages from this NIC in the span port
seems
Lowell,
Maybe I'm missing something but that is where I was
going and the only available code there is the
DarwinStreamingSrvr5.5-Source.tar file and the others
for Linux and OS X. I'm still unable to find any .zip
file on the page. Did you find it?
Dean
--- Lowell Gilbert
[EMAIL PROTECTED]
I recently installed FreeBSD over serial on a GX280 (no PS/2 ports and
ACPI conflicts using boot with usb keyboard option). After installing
I changed my ttys to
ttyd0 /usr/libexec/getty std.9600 unknown on secure
ttyd1 /usr/libexec/getty std.9600 unknown off secure
...
As talked about in the
I am not sure which list to post this to, I'll start here. :-) I am trying to
play a CD through amaroK in KDE, but when I try to mount the disc I get the
following error:
cd9660: /dev/acdo: Operation not permitted
I am not running as root when trying to access the device and I'm sure this is
On Friday 01 July 2005 11:02 pm, Nikolas Britton wrote:
On 7/1/05, Bryan Maynard [EMAIL PROTECTED] wrote:
I read through your kernel - very nice comments, thanks a lot!
I compiled the kernel and boot-up is noticably faster, thanks again!
I would like to investigate transfering all the
On Fri, 8 Jul 2005 14:42:22 +
Bryan Maynard [EMAIL PROTECTED] wrote:
I am not sure which list to post this to, I'll start here. :-) I am
trying to play a CD through amaroK in KDE, but when I try to mount
the disc I get the following error:
cd9660: /dev/acdo: Operation not permitted
Florian Hengstberger [EMAIL PROTECTED] writes:
How to creata a second locate database for private use?
(mp3 database or so).
I have tried
$ locate -U dir_with_mp3s -o database.dtb
Searching in this database doent work
$ locate -d database.dtb somesong.mp3
gives no result.
The database
Don't top-post, please.
steve lasiter [EMAIL PROTECTED] writes:
Lowell,
Maybe I'm missing something but that is where I was
going and the only available code there is the
DarwinStreamingSrvr5.5-Source.tar file and the others
for Linux and OS X. I'm still unable to find any .zip
file on
Lowell Gilbert wrote:
Florian Hengstberger [EMAIL PROTECTED] writes:
How to creata a second locate database for private use?
(mp3 database or so).
I have tried
$ locate -U dir_with_mp3s -o database.dtb
Searching in this database doent work
$ locate -d database.dtb somesong.mp3
gives no
On Fri, Jul 08, 2005 at 02:42:22PM +, Bryan Maynard wrote:
I am not sure which list to post this to, I'll start here. :-) I am
trying to play a CD through amaroK in KDE, but when I try to mount the
disc I get the following error:
You don't have to mount a music CD.
cd9660: /dev/acdo:
I'm trying to get suspend-to-disk (S4OS) working. (S3 doesn't work, but
I'll worry about that later). When I run acpiconf -s 4, it appears to
suspend ok. However, when I boot the computer, it just boots as normal,
rather than resuming (it does complain about uncleanly unmounted
disks). How do I
I am having some problems with portupgrade. The error message is /
usr/local/lib/ruby/site_ruby/1.8/pkgdb.rb:322:in `deorigin': (more
below). I see there have been isolated occurrences of this in June of
2003 and 2004, curiously, but I haven't found the solutions there to
work. Removing
On Fri, 8 Jul 2005, Garrett Cooper wrote:
Andreas Davour wrote:
On Fri, 8 Jul 2005, Bryan Maynard wrote:
I am not running as root when trying to access the device and I'm
sure this is the problem. . . I just don't know how to fix it :-) .
I don't know if I used amaroK or whatever KDE
Howdy,
i'll be meeting tuesday with staffers for my congressman (since
he's still in D.C.) to discuss software patents and the evil behind
them. I've got a new perspective on the troubles they can cause given
my Summer of Code project which is licensed under the APSL (http://
I just installed FreeBSD 5.4 and am having problems setting up DSL.
I followed the instructions in the handbook, but nothing worked.
Do I have to configure something else other than ppp.conf?
Thanks,
Jake
___
freebsd-questions@freebsd.org mailing
I am trying to get dovecat running on a FreeBSD-5.2.1 system with a
nightly-updated ports tree. I am running into the problem that dovecat
0.99.14 is not compatible with GNUTLS at the moment, as document on this
list previous to my joining:
# make config
will allow you to redo your config
I was installing apcupsd with an APC USB UPS, and found that I needed to
disable the uhid driver. The instructions on the apcupsd site
specifically say to recompile the kernel. But, I try to keep my kernel
as generic as possible, so I tried entering the following line into the
device.hints
I ran into a configure error while updating php5, I get the following:
Configuring extensions
checking whether to enable LIBXML support... yes
checking libxml2 install dir... /usr/local
checking whether libxml build works... no
configure: error: build test failed. Please check the config.log
73 matches
Mail list logo
