Thank you for writing in to [EMAIL PROTECTED]
You should hear from us in 4 working hours. However you can also call us at your
local customercare, details of which are available at our website
http://customercare.sify.com .
You may also use our new service offerings.
Matthew Seaman wrote:
On Sat, Apr 03, 2004 at 02:53:15PM -0700, RYAN vAN GINNEKEN wrote:
I use freebsd 4.9 stable and apache 2.0.0.49 with mod_ssl when i type
startssl everything seems to work ie my non ssl sites and my ssl site.
However on reboot my ssl site does not come up until i run
I have installed bsd on an a pentium II machine and using the cd-rom. As of now it is
no longer working properly I cannot finnish installing all of the cd's I purchasd. The
cd-rom is 40x Delta I think model #OPC-K105/5 ST1. I am an art studdent with very
littl knowledeg of computers but am
Hello,
I'm trying to use strace to debug a program as directed by a developer.
The command i was given is:
strace -f -o /tmp/logfile comandname -d
where d is debug. When i enter this i get an error that a proc file is
unable to be open. I don't have any proc files. I've never done any
Hi,
I need to connect my freebsd server to APC BackUPS 500 RS. The
problem is that apcupsd does not support this combination.
Ports was not really helpful. So, if anybody have the patches, or
any idea of how to make it working I would realy appreciate it.
Thanks a lot in advance.
--
With best
dear all,
i have network like this
lanX.com -
|
lanA.com IPFW FBSD lanB.com === to Internet
| |
lanC.com ---| |--- lanD.com
right now,... lanA.com , lanC.com, lanD.com have
smtpoutgoing to internet via lanB.com
the problem is ..
On Monday 05 April 2004 14:52, Mipam wrote:
Im getting the same problem with my Intel 82544XT PRO/1000 MT Gigabit Ethernet
Controller. (Dell 600SC server, onboard card)
04:38:19.775211 bsd02.contentspace.priv.49179 cs02.contentspace.priv.domain:
[bad udp cksum 5732!] 4740+ PTR?
On Tue, Apr 06, 2004 at 12:04:58AM -0600, RYAN vAN GINNEKEN wrote:
Patch guess i am new to patches in fact this is my first one usually
just install the port as is and hope that all the patches are added.
Have compiled a few packages from source but would rather not.
Oh i think i get it
Hi,
Upgraded KDE yesterday to 3.2.1 . KDM was upgraded.
Now, whenever I try to login to KDE it always starts the failsafe i.e. a
single xterm.
It doesn't matter what session type I select in KDM, I always get failsafe
so no KDE for me.
If I start KDE using startx and a .xinitrc with exec
On Mon, Apr 05, 2004 at 06:24:12PM -0700, [EMAIL PROTECTED] wrote:
Were installing 5.2 from discs we purchased from BSD
Mall. The system starts to load, The daeman page shows
up with the boot options. What ever we pick it ends up
showing the Error message: Fatal trap 12: page fault
while in
On Tue, 6 Apr 2004 5:01 am, Feczak Szabolcs wrote:
How can I get the latest bugs ? :) Can I ?
I can cough on you that out to do it...
Sorry couldnt resist
___
[EMAIL PROTECTED] mailing list
Thanks, that's got it. vipw(8) was what I needed, in that it
allows one to keep the databases in sync with the password
files, which was more the problem.
rip
At 11:48 05/04/2004, Julien Gabel wrote:
I've got a 4.8R system that I use for development of a 'freebsd-small'
type network device.
On Mon, Apr 05, 2004 at 08:59:35PM -0600, Jay Moore wrote:
So portupgrade prompted me to run 'pkgdb -F'... to fix a stale dependency. I
complied, typed the requisite command at the prompt, and received the
following in return:
--- Checking the package registry database
Stale dependency:
Hi fellows,
Is it possible that SQUID doesn't care about
nameservers listed in /etc/resolv.conf ?
We experienced the following effect:
in /etc/resolv.conf it says
nameserver a.b.c.d a.b.c.e
When 'a.b.c.d' went down SQUID couldn't do
dns lookups anymore, while the machine
itself could.
Adding
On Tuesday 06 April 2004 02:57, Antoine Jacoutot wrote:
Yes, the blackholes have been known to cause problems with GNOME
startup. First make sure you can do:
Indeed, blackholes were the problem...
It works now. Is there a way to have blackholes enabled and make tthis work
anyway ?
Antoine
Hello,
is there anything in BSD world like Linux journal in the linux world ?
I was looking for BSD related journals and I found only BSD world
but looks like it is in japanese language...
anyone knows about a good BSD magazione ?
thanks
Rick
___
On Tue, 6 Apr 2004 04:33:45 -0600 (MDT)
RJ45 [EMAIL PROTECTED] wrote:
is there anything in BSD world like Linux journal in the linux world ?
I was looking for BSD related journals and I found only BSD world but looks
like it is in japanese language...
anyone knows about a good BSD
I don't think they have any new printings for quite some time now. Anyone
know for sure?
Ada
On Tue, 6 Apr 2004, Thorsten von Plotho-Kettner wrote:
On Tue, 6 Apr 2004 04:33:45 -0600 (MDT)
RJ45 [EMAIL PROTECTED] wrote:
is there anything in BSD world like Linux journal in the linux world ?
Hi,
Doing ifconfig bge0 i saw:
options=1bRXCSUM,TXCSUM,VLAN_MTU,VLAN_HWTAGGING
When i do ifconfig bge0 -txcsum i saw:
options=18VLAN_MTU,VLAN_HWTAGGING
So it means txcsum and rxcsum are enabled by default, so checksum
offloading is enabled by default?
However, whether i configure bge0 with or
hi
i was wondering if u could help me.
When i type ipconfig/release [adapter] in msprompt it says dhcp not enabled for
that adapter.
it is a ppp adapter.
I have managed to enble dhcp for my lan but not my internet connection.
Can u help me out?
Mike
Bernd Walter wrote:
[snip]
Apr 3 12:32:32 antsrv1 kernel: da1: 19077MB (39070080 512 byte sectors:
255H 63S/T 2432C)
Apr 3 12:33:03 antsrv1 login: ROOT LOGIN (root) ON ttyv0
Apr 3 12:38:08 antsrv1 syslogd: kernel boot file is /boot/kernel/kernel
Apr 3 12:38:08 antsrv1 kernel: panic:
Hi!
I need to figure out how much memory process really takes.
For example, i am running 100 perl scripts, they are all the
same source and i guess some memory is shared among them
(mostly perl interperter i guess). So, i need to know how much
memory is shared and how much memory is used for each
Hello all,
Well, this is an ongoing problem. I have been trying
to install kde3 for some time now, with errors trying
to install the dependency qt-x11-free-3.3.1.
So yesterday, I formatted the box, and reinstalled
FreeBSD, cvsupped the ports, and tried again. I am
still seeing this error. Does
On Tue, Apr 06, 2004 at 01:58:42PM +0200, Heinrich Rebehn wrote:
Bernd Walter wrote:
[snip]
Apr 3 12:32:32 antsrv1 kernel: da1: 19077MB (39070080 512 byte sectors:
255H 63S/T 2432C)
Apr 3 12:33:03 antsrv1 login: ROOT LOGIN (root) ON ttyv0
Apr 3 12:38:08 antsrv1 syslogd: kernel boot
hello,
Im in the middle of a re-structuring the email server for a large company.
They want to have a webmail interface so that they can access thier email
remotly or from abroad. My question is that currently they are using a
windows imail server (uhg) I want to move them to a unix platform
On Tue, 6 Apr 2004 09:04:50 -0400 (EDT)
Brent Bailey [EMAIL PROTECTED] spake thus:
hello,
Im in the middle of a re-structuring the email server for a large company.
They want to have a webmail interface so that they can access thier email
remotly or from abroad. My question is that
I'm looking for a relatively inexpensive wireless setup for home that will
work with FreeBSD and an older laptop. Does anyone have any suggestions?
NOTE: Please CC me, as I am not currently subscribed. Thanks.
jm
--
My other computer is your windows box.
Hello,
Yesterday I did a cvsup for ports and attempted to run portupgrade -R on
gaim. I had trouble building the gtk2 dependancy until did a cvsup and
rebuilt my 5.2.1 world and kernel.
After installation of world and kernel all of gaim's required packages
upgraded except security/nss-3.9.1.
On Tue, 6 Apr 2004, Artem Koutchine wrote:
Hi!
I need to figure out how much memory process really takes.
For example, i am running 100 perl scripts, they are all the
same source and i guess some memory is shared among them
(mostly perl interperter i guess). So, i need to know how much
In the last episode (Apr 06), Yaraghchi, Stephan said:
Is it possible that SQUID doesn't care about
nameservers listed in /etc/resolv.conf ?
We experienced the following effect:
in /etc/resolv.conf it says
nameserver a.b.c.d a.b.c.e
Try:
nameserver a.b.c.d
nameserver a.b.c.e
instead
On Tue, Apr 06, 2004 at 09:40:09AM +0930, Greg 'groggy' Lehey wrote:
On Monday, 5 April 2004 at 19:09:46 -0400, Rob Ellis wrote:
On Tue, Apr 06, 2004 at 08:12:49AM +0930, Greg 'groggy' Lehey wrote:
On Monday, 5 April 2004 at 12:42:12 -0400, Rob Ellis wrote:
We have a machine with a vinum
-Original Message-
From: Dan Nelson [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 06, 2004 4:24 PM
To: Yaraghchi, Stephan
Cc: [EMAIL PROTECTED]
Subject: Re: SQUID ignores /etc/resolv.conf
In the last episode (Apr 06), Yaraghchi, Stephan said:
Is it possible that SQUID doesn't
I was trying to disable ACPI by editing device.hints, and left some
garbage at the start of the file. Now I find the kernel won't boot -
you get to the little Daemon flash page, and then kernel load goes on
and after the first line of boot, the star fails to spin.
I've got a spare copy of the
On Tue, Apr 06, 2004 at 07:42:34AM +, [EMAIL PROTECTED] wrote:
I have installed bsd on an a pentium II machine and using the cd-rom.
As of now it is no longer working properly I cannot finnish installing
all of the cd's I purchasd. The cd-rom is 40x Delta I think model
#OPC-K105/5 ST1. I
I updated my home PC to a new 2.4 Athlon, ASRock motherboard and 256MB RAM.
So far it works fine, but every time I try to play a movie which requires
a Wwindows codec (.mov, .wmf) mplayer crashes with Ilegal Instruction
it works fine with MPEG or aVI files.
Does anyone have any pointer about how
On Tue, Apr 06, 2004 at 04:28:53PM +0100, Andy Holyer wrote:
If I boot from floppies the emergency shell doesn't seem to include a
copy of mount, so I can't rectify the fault.
Booting from alternate media is your simplest route to fixing things.
Are you sure there's no mount command on the
Hello.
Could anyone tell me whether i can use my Samsung ML-1710P laser printer,
connected via USB(i would prefer) or LPT, with FreeBSD? If YES - some
instructions, please.
Thanks everybody.
Igor.
___
[EMAIL PROTECTED] mailing list
I'm looking for an in country hardware supplier, preferrably someone Open
Source Friendly, to pick up servers from, instead of having to ship them
in from the US or Canada ...
Help?
Marc G. Fournier Hub.Org Networking Services (http://www.hub.org)
Email: [EMAIL PROTECTED]
On Tue, Apr 06, 2004 at 07:42:34AM +, [EMAIL PROTECTED] wrote:
I have installed bsd on an a pentium II machine and using the cd-rom.
As of now it is no longer working properly I cannot finnish installing
all of the cd's I purchasd. The cd-rom is 40x Delta I think model
#OPC-K105/5 ST1. I
Since RPM does not come with the standard installation I downloaded it from
your site. Unpacked it and tried to install it.
I ran the make file in the RPM directory.
Why does it have to update the entire system if you say that Makefile is not
needed?
Did I screw up something?
George
[EMAIL
I deleted libssl.so.3 by accident
Whats the best way to get it back w/o reloading (fetch depends on it...and
I found it fast!)
Thanks :)
--
J.D. Bronson
Aurora Health Care // Information Services // Milwaukee, WI USA
Office: 414.978.8282 // Email: [EMAIL PROTECTED] // Pager:
On Tue, Apr 6, 2004, Jonathon McKitrick clacked the keyboard to produce:
I'm looking for a relatively inexpensive wireless setup for home that will
work with FreeBSD and an older laptop. Does anyone have any suggestions?
NOTE: Please CC me, as I am not currently subscribed. Thanks.
Post
Hello All, I ran into a weird problem today, basically I can only have
four IP's on my fxp0 card if I try to add a fifth it's like it
overwrites the 1st address. Any suggestions? please cc:email thanks
Isaac Hopkins
___
[EMAIL PROTECTED] mailing list
I deleted libssl.so.3 by accident
Whats the best way to get it back w/o reloading (fetch depends on
it...and I found it fast!)
If it is /usr/lib/libssl.so.3, the following can do the job :
# cd /usr/src/secure/lib/libssl
# make obj make depend make
--
-jpeg.
All:
I've tried mount and mount_cd9660 in my testing of this issue and I run
into the same problems. I've also tried trying my internal CD drive
(Samsung 140B I borrowed out of another machine) onto my other controller
(ultra ATA133), with no improvements. In fact when I did that I could
On Tue, 06 Apr 2004 11:25:36 -0500
J.D. Bronson [EMAIL PROTECTED] wrote:
I deleted libssl.so.3 by accident
Whats the best way to get it back w/o reloading (fetch depends on it...and
I found it fast!)
Thanks :)
--
If (ok, mighty big if, but) you just recently build
On Tuesday 06 April 2004 11:25 am, J.D. Bronson wrote:
I deleted libssl.so.3 by accident
Whats the best way to get it back w/o reloading (fetch depends on it...and
I found it fast!)
Thanks :)
Back in the early 1980's, I was cleaning out my files and directories from my
father's
On Tue, Apr 06, 2004 at 10:23:12AM -0600, GP wrote:
Since RPM does not come with the standard installation I downloaded it from
your site. Unpacked it and tried to install it.
I ran the make file in the RPM directory.
Why does it have to update the entire system if you say that Makefile is not
On Tuesday 06 April 2004 11:36 am, Julien Gabel wrote:
I deleted libssl.so.3 by accident
Whats the best way to get it back w/o reloading (fetch depends on
it...and I found it fast!)
If it is /usr/lib/libssl.so.3, the following can do the job :
# cd /usr/src/secure/lib/libssl
#
Heya,
FREEBSD 4.9-STABLE
Is there anyway to block SYN attacks and prevent it from bring down
my server?
Its been attacking for sometime.
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
On Tue, Apr 06, 2004 at 12:31:52PM -0400, Bob Collins wrote:
On Tue, Apr 6, 2004, Jonathon McKitrick clacked the keyboard to produce:
I'm looking for a relatively inexpensive wireless setup for home that will
work with FreeBSD and an older laptop. Does anyone have any suggestions?
On Tuesday 06 April 2004 12:01 pm, Spades wrote:
Heya,
FREEBSD 4.9-STABLE
Is there anyway to block SYN attacks and prevent it from bring down
my server?
Its been attacking for sometime.
Checkout the link below. There's a series of articles regarding firewalls in
FreeBSD:
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Aleksandar Simic
Sent: Tuesday, April 06, 2004 7:45 PM
To: [EMAIL PROTECTED]
Cc: Bob Collins; Jonathon McKitrick
Subject: Re: Inexpensive wireless suggestions?
On Tue, Apr 06, 2004 at
On Tue, Apr 06, 2004 at 06:44:43PM +0100, Aleksandar Simic wrote:
: On Tue, Apr 06, 2004 at 12:31:52PM -0400, Bob Collins wrote:
: On Tue, Apr 6, 2004, Jonathon McKitrick clacked the keyboard to produce:
:
: I'm looking for a relatively inexpensive wireless setup for home that will
: work
HI
I am a total newbie to all things related to USB2 and
Firewire.
I have a 10GB external hard disk formatted in FAT32.
It is the only single partition.
FreeBSD 5.2.1, P3-866Mhz, 256 MB RAM.
Use a PCI Firewire card. DMesg recognizes this as
LUCENT FW 322/323.
I have the foll in my kernel config
Hi,
Has anyone managed to get the Palm Tungsten T USB working properly with
the FreeBSD uvsior/ucom interface and pilot-link? I tried several
solutions written on the web, including the one which suggest Hotsync
over network by running a ppp-daemon to make the connection with the
Palm.
None of
I am runing the script to upgrade gnome 2.4 to the new gnome 2.6
WHY IT TRY TO UPDDATE KDE THINGS LIKE kdelibs
i have installed kde 3.2 and the script upgrade it to 3.2.1
___
[EMAIL PROTECTED] mailing list
On Tue, Apr 6, 2004, Aleksandar Simic clacked the keyboard to produce:
On Tue, Apr 06, 2004 at 12:31:52PM -0400, Bob Collins wrote:
On Tue, Apr 6, 2004, Jonathon McKitrick clacked the keyboard to produce:
I'm looking for a relatively inexpensive wireless setup for home that will
On Tue, Apr 06, 2004 at 08:02:53PM +0200, mark rowlands wrote:
: 4.9 - stable
:
: Cheap
: D-Link DWL-650
:
: Not Cheap
: Cisco pcm352
:
: both worked nicely, I was able to set up the D-link as an ad-hoc access
: point
: for the Cisco to connect to
So how tough is it to set up? Without the
I cvsup'd the ports tree on one of my machines today, and was trying to
build a Gnome related port. I recived a warning message pointing to:
http://www.FreeBSD.org/gnome/docs/develfaq.html
And saying that failure to follow the instructions there would result in
brekage of my Gnome apps.
What
Hi,
I am using Red Hat Linux 9.0 as a web server running apache. I am just
starting using FreeBSD and I would like to use it instead of Read Hat 9.0.
Can you please inform me on how to get a web server ftp server running
using FreeBSD.
Thanks,
Mark
[EMAIL PROTECTED] wrote:
Hi,
I am using Red Hat Linux 9.0 as a web server running apache. I am just
starting using FreeBSD and I would like to use it instead of Read Hat 9.0.
Can you please inform me on how to get a web server ftp server running
using FreeBSD.
Thanks,
Mark
Deogratious wrote:
Am by the names of Deogratious and i wish to know some thing better with more
explanations.
Could you mplease tell me the mail software that i can pu under FreeBSD and i can add
clients and it can be accessed in properly for their mails
yours
If you'd like to run a mail
It's possible do and upgrade from realease 5.2 to 5.2.1 or 5.3 or 5.4 etc etc etc. I
dont want download more RELEASE ISOS , i just want do an installation and then upgrade
it. I am thinking in the use of CTM for the ports . is it possible ?
Thanks
install freebsd
install the ports
install the webserver from the ports
You may find it easier to simply install the Apache package (by selecting
Configure - Packages during the isntall).
Although the ports tree is more flexible and current, sometimes the
overhead of compiling a package from
On Tue, Apr 06, 2004 at 04:07:58PM -0400, Osmany Guirola Cruz wrote:
It's possible do and upgrade from realease 5.2 to 5.2.1 or 5.3 or 5.4 etc etc etc.
I dont want download more RELEASE ISOS , i just want do an installation and then
upgrade it. I am thinking in the use of CTM for the ports
Osmany Guirola Cruz wrote:
It's possible do and upgrade from realease 5.2 to 5.2.1 or 5.3 or 5.4 etc etc etc. I dont want download more RELEASE ISOS , i just want do an installation and then upgrade it. I am thinking in the use of CTM for the ports . is it possible ?
Thanks
I am trying to use the make world process and am having a major problem.
Everything goes well until the last step.
First I tied upgrading to 4.9 stable by:
cvsuping RELENG_4
make buildworld
make buildkernel
make installkernel
reboot (single user)
mergemaster -p
make installworld
mergemaster
using cvsup you can download the latest cvs branches from freebsd
and then update it from time to time or when security demands it ( a
must do ! :-) )
you can find it in /usr/ports/net/csvsup(-without-gui)
If there is one program I would recommend you _NOT_ install from the
ports tree then
On Monday 05 April 2004 21:50, Malcolm Kay wrote:
On Monday 05 April 2004 21:07, Matthew Seaman wrote:
...
The next part -- no Mozilla window appearing -- is definitely
incorrect behaviour. You will need to wait for a while for Mozilla to
get itself sorted out if this is the first time
Hello list,
I've got a server where I've setup apache, mod_ssl, and cgiirc for some users.
One in particular complains that his connection keeps timing out. All I see
in the logs are:
[Tue Apr 6 15:24:05 2004] [error] mod_ssl: SSL handshake interrupted by
system [Hint: Stop button pressed
On 4/1/2004 3:12 PM Drew Tomlinson wrote:
I'm using 4.9-RELEASE-p4 and have an 80 GB IDE hard drive in a
firewire enclosure. When I reboot my system, the drive is not
recognized. However if I unplug/plug the firewire cable, then the
drive is recognized. I've included my dmesg output below.
[EMAIL PROTECTED] wrote:
I am trying to use the make world process and am having a major problem.
Everything goes well until the last step.
First I tied upgrading to 4.9 stable by:
cvsuping RELENG_4
make buildworld
make buildkernel
make installkernel
reboot (single user)
mergemaster -p
make
Hi all,
I'm interested in using FreeBSD's daemon logo screensaver in X. Is that
possible? If it is, how do I do it? any man that I can read? Thx heaps =)
Regards,
Andri
_
SEEK: Now with over 50,000 dream jobs! Click here:
To be more specific I found a controllre by Q-Tec (425U) wtih a Via
VT6202 chipset. Anyone know if this will work?
As a follow-up: That Q-Tec controller (that I ended up buying) didn't work...
USB1 works as usual, but no luck with ehci. When plugging in a usb2 drive
either nothing happens,
On Tue, 2004-04-06 at 15:41, stan wrote:
I cvsup'd the ports tree on one of my machines today, and was trying to
build a Gnome related port. I recived a warning message pointing to:
http://www.FreeBSD.org/gnome/docs/develfaq.html
And saying that failure to follow the instructions there
On Wed, Apr 07, 2004 at 07:27:09AM +1000, sAndri Kok wrote:
I'm interested in using FreeBSD's daemon logo screensaver in X. Is that
possible? If it is, how do I do it? any man that I can read? Thx heaps =)
That's the one where the Beastie bounces about the screen, right?
Best bet is
On Tue, 2004-04-06 at 00:13, Jesse Sheidlower wrote:
On Mon, Apr 05, 2004 at 12:00:48AM -0400, Joe Marcus Clarke wrote:
The FreeBSD GNOME Team is delighted to announce the release of the GNOME
2.6 Desktop and Developer suites for FreeBSD. Accompanying this release
are the usual meta-port
On Tuesday 06 April 2004 23:57, Marcelo wrote:
Hello all,
I have a Logitech optical mouse with scroll, and i've used the scroll
function in several linux distros, but in freebsd i didnt find the
solution yet..
Is there any line to add in xf86config file, or other manner to solve
that?
Hello all.
I've run into some problem.. some of processes on my machine eats so much CPU...
look:
ps aux gives
USER PID %CPU %MEM VSZ RSS TT STAT STARTED TIME COMMAND
root 199 34.8 0.5 10852 10560 ?? Rs Sun10PM 3316:56.86 natd -a 212.59.9.59 -p 8668
root 201 4.7 0.0 664 356 ?? Ss Sun10PM
Hi,
After trying to play a little mpeg movie in mplayer, FreeBSD crashed
(nothing worked anymore) and I had to reboot the system.
When the system rebooted I suddenly received tons of messages:
...
es1371: wait src ready timeout 0x10 [0x]
...
And after that:
...
pcm0: ac97 codec invalid
Hello all,
Please, inform me if I have been removed from the mailing list.
I am receiving mail from the other lists I subscribe to, but not
freebsd-questions. I understand that this could be due to a
misconfiguration on my part, but Exim logs show no evidence of
false rejections, or that there
Hi all
I cvsup'ed ports this afternoon, and I am trying to update thunderbird,
which uses gtk2.0.
Here is the error I get building gtk20 from ports...
Making all in stock-icons
GDK_PIXBUF_MODULE_FILE=../../gdk-pixbuf/gdk-pixbuf.loaders
../../gdk-pixbuf/gdk-
-Original Message-
From: Kris Kennaway [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 06, 2004 5:15 PM
To: Joshua Lokken
Cc: [EMAIL PROTECTED]
Subject: Re: your mail
On Tue, Apr 06, 2004 at 04:56:02PM -0700, Joshua Lokken wrote:
Hello all,
I am receiving mail from the other lists I
On Wed, Apr 07, 2004 at 01:24:42AM +0100, Jonathon McKitrick wrote:
Hi all
I cvsup'ed ports this afternoon, and I am trying to update thunderbird,
which uses gtk2.0.
Here is the error I get building gtk20 from ports...
Making all in stock-icons
(error message sniped)
Any ideas???
I (tried) following the instructions at:
http://high5.net/howto/
I have postfix virtual users working in MySQL. I have courier imap/pop3
working w/ virtual users. I wanted to add SMTP auth.
I added the cyrus-sasl2 port (also chose support for it in postfix port)
WITH_MYSQL.
No go.
I added the
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Isaac Hopkins
Sent: Tuesday, April 06, 2004 11:31 AM
To: [EMAIL PROTECTED]
Subject: maximum number of addresses/networks on 5.0-Release fxp driver?
Hello All, I ran into a weird problem today, basically I
-Original Message-
From: Kris Kennaway [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 06, 2004 5:35 PM
To: Joshua Lokken
Cc: 'Kris Kennaway'; [EMAIL PROTECTED]
Subject: Re: your mail
I don't understand what you're trying to say. You're probably
subscribed but have list delivery
Hi,
Any suggestions on how to connect a Sony Ericsson P900 to FreeBSD? Dream
scenario is to be able to sync address and calendar data, as well as
installing programs etc. Really, all that's possible with the Windows
client, I guess. I don't have Windows, just FreeBSD, and really want
On Tue, Apr 06, 2004 at 05:44:08PM -0700, Joshua Lokken wrote:
-Original Message-
From: Kris Kennaway [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 06, 2004 5:35 PM
To: Joshua Lokken
Cc: 'Kris Kennaway'; [EMAIL PROTECTED]
Subject: Re: your mail
I don't understand what you're
On Tue, 6 Apr 2004 21:15:09 -0400
Craig Booth [EMAIL PROTECTED] spake thus:
During the initial SYSINSTALL setup of Xfree86 on my Sony VAIO PCG-FRV27
laptop under FreeBSD 4.9, the setup goes through the configuration menus,
then says it failed and do I want to try again. I exited SYSINSTALL
On Tue, 6 Apr 2004 11:11:03 +0300, in sentex.lists.freebsd.questions
you wrote:
Hi,
I need to connect my freebsd server to APC BackUPS 500 RS. The
problem is that apcupsd does not support this combination.
Ports was not really helpful. So, if anybody have the patches, or
any idea of how to make
That would be sufficient to create a script to monitor
the power state, maybe have the script check the
status again in 10 minutes and shutdown the PC if
necessary.
It can be done right?
--- Mike Tancsa [EMAIL PROTECTED] wrote:
On Tue, 6 Apr 2004 11:11:03 +0300, in
At 10:48 PM 06/04/2004, Me wrote:
That would be sufficient to create a script to monitor
the power state, maybe have the script check the
status again in 10 minutes and shutdown the PC if
necessary.
It can be done right?
The time estimate is very inaccurate on the ES and RS units that I have
Brent Wiese told a big fish story including the following on 04/06/2004
5:40 PM:
I (tried) following the instructions at:
http://high5.net/howto/
I have postfix virtual users working in MySQL. I have courier imap/pop3
working w/ virtual users. I wanted to add SMTP auth.
I added the cyrus-sasl2
95 matches
Mail list logo