I's confuzzled (and such).
usbd picks up the rodent without a problem and spins up moused with
appropriate options (-p /dev/ums0 -I /var/run/moused.ums0.pid).
Some simple tests:
$ sudo moused -p /dev/ums0 -i all
/dev/ums0 usb sysmouse generic
$ sudo moused -d -f -p /dev/ums0
moused: proto
This is an Autoresponder - If you need to to remove our software do this:
1- Go to the View menu on top of your Internet Explorer then >> Toolbars >> and
uncheck any blank line or "tiny search bar"
2- Go to www.tinybar.com , at the bottom of the page click on 'Reset your search page
back to MSN
Hakim Z. Singhji wrote:
I recently purchased an IBM Thinkpad R51 and I was looking to install
FreeBSD 4.10. Has anyone ever done this? Should I anticipate any
problems? Lastly I have never installed FreeBSD on a laptop before are
there things that I should know before I get started? Thanks in advan
Hello All,
I'm looking for some information on the Errata Branch for 4.10. I just
re-installed my FreeBSD system and am now running 4.10-RELEASE. I want
to make sure that I am running with the most-up-to-date security patches
applied.
I would like to know the steps necessary for appling the cha
Ben Paley wrote:
On Sunday 08 August 2004 13:00, [EMAIL PROTECTED] wrote:
Hi,
I CVSup's my system (FreeBSD 4.9-p2 #0) early this morning and found
the following in /usr/ports/CHANGES:
20040803:
AUTHOR: [EMAIL PROTECTED]
As part of the ongoing autotools cleanup, devel/autoconf has been
replaced
Hello Dan,
Friday, September 3, 2004, 12:18:57 AM, you wrote:
> In the last episode (Sep 02), DanGer said:
>> when i trying to use the command 'lastcomm danger (or any other
>> username or command)' i just get this error:
>>
>> [EMAIL PROTECTED] /var/account]$ lastcomm danger
>> lastcomm: /v
The install process is discussed in great detail in the handbook on
the FreeBSD web site, if you can get to it. The FAQ has several items
dealing with this issue.
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/using-sysinstall.html
Did you choose a standard install?
Is this machine f
We are using IBM
x300
x305
x335
x345
>From their eServer series and seem to be quite stable
Databases, imap servers, apache servers, samba servers
FreeBSD 4.9 on most production boxen at present.
(We also run m$ servers on the same platforms as needed)
--
Murray Taylor
Special Projects Engine
Scott Pepperdine wrote:
Hi all,
I am attempting to load FreeBSD 4.9 from CD onto a Micron Millenia XKU
(Pentium II, 300 MHz, 390 MB RAM). The install runs very smoothly and
completes successfully. But when I attempt to boot from the hard drive it
just reboots.
If I tell the install to replace the
Hi all,
I am attempting to load FreeBSD 4.9 from CD onto a Micron Millenia XKU
(Pentium II, 300 MHz, 390 MB RAM). The install runs very smoothly and
completes successfully. But when I attempt to boot from the hard drive it
just reboots.
If I tell the install to replace the MBR then the machine
Hello I'm running fbsd 4.10 and i would like to run
linux emulator but I see 3 versions in ports, does it
matter which one I install and do I have to add
anything to make.conf if I choose to use one other
than the one that is default?
___
Hi,
Make this be the "Device" section of /etc/X11/XF86Config:
Section "Device"
Option "UseBIOS" "off"
Option "NoDDC"
Identifier "Card0"
Driver "siliconmotion"
ChipSet "LynxEM+"
Card"siliconmotion LynxEM+"
EndSection
Seems to work fine for
On Mon, Aug 30, 2004 at 05:44:34PM +0600, indunil wrote:
> Hey,
>
> I installed PHP, Couier-Imap and squirellmail for MTA sendmail under
> freeBSD 5.2.1. but when i go to squirellmail and login to it, it says
> unknown user name and password.
>
> What is wrong with it.
>
> Imap is also working,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi All,
I recently purchased an IBM Thinkpad R51 and I was looking to install
FreeBSD 4.10. Has anyone ever done this? Should I anticipate any
problems? Lastly I have never installed FreeBSD on a laptop before are
there things that I should know before
I have an LPRng print server running FreeBSD 4.10, and I'm running into
some problems with the hostnames that LPRng returns to lpq. We need to
provide access to queues on a different machine which is in a different
domain, but lpd only returns partial hostnames (mir instead of
mir.earlham.edu), so
My Quake2 runs perfect under root smooth as can be. Under a normal user
however it seems like every few seconds or every second the graphics twictch
a bit or jerk. I don't have any applets running in the background and am
using the exact same configs.
Running 6-CURRENT 9-2-2004 and X.org CURREN
Hello all,
We are an Australian company looking to buy some rack-dense hardware for a FreeBSD
implementation at a colocation facility.
So far we have got some quotes from Dell for:
* Some PowerEdge 1850 servers
* PowerEdge 2850
* PowerVault 220S direct attach storage
Are there any issues with
I had just cvsupped, so I ran portsdb -uU.
Odd that the message says [BUG]
That implies that someone knew about it...
How can I recover?
[EMAIL PROTECTED](p0)/usr/src 103% portsdb -uU
Updating the ports index ... Generating INDEX.tmp - please wait..Warning:
Duplicate INDEX entry: freeciv-gtk
what does "interactive" mean.
I recently updated docproj and it wasn't marked interactive. There's nothing
in UPDATING...
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[
On 09/02/04 01:23 PM, Kendall Gifford sat at the `puter and typed:
> On Mon, 30 Aug 2004 08:40:00 -0400, Louis LeBlanc
> <[EMAIL PROTECTED]> wrote:
> > Well, it's probably not an old BOIS, since the machine is less than 3
> > months old. I checked the BIOS after the system locked up, and it was
>
it was said:
> ... I started seeing all kinds of errors when
> trying to copy more than 16383 messages into one
> of my folders there. I'm retrieving mail from a
> pop3 server using Outlook then copying them into
> my imap folder, also using Outlook.
Hello,
16383 was a limit in OL before versio
I tried recompiling the kernel on a 5.3-beta2 box with DEVICE_POLLING
enabled. Compilation failed with a message saying DEVICE_POLLING isn't
compatible with SMP.
Luigi says on:
http://info.iet.unipi.it/~luigi/polling/
"Why does this code not work with SMP ?
It actually might work (if you remove
Maybe the Eddie Mission?
http://eddie.sourceforge.net/
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Steve Bertrand
> Sent: Friday, July 09, 2004 6:15 AM
> To: [EMAIL PROTECTED]
> Subject: Layer 4 switching in FBSD?
>
> I'd like to implemen
On Thu, 2 Sep 2004, Lucas Holt wrote:
After seeing several posts recently on portindex, I decided to try it out.
Most of the posts claimed you had to run portsdb -u after portindex.
You *can* run it after portindex, but the man page for portsdb says it
is "automatically updated on demand when it
On Thursday, September 02, 2004 4:30:57 PM Dan Finn <[EMAIL PROTECTED]> wrote:
|>Date: Thu, 2 Sep 2004 11:34:44 -0700
|>From: Dan Finn <[EMAIL PROTECTED]>
|>Subject: portupgrade, portsdb -U failing, ruby dumping core
|>To: FreeBSD-Questions <[EMAIL PROTECTED]>
|>Message-ID: <[EMAIL PROTECTED]>
|>C
Hello everyone,
Having some trouble with my cdrw ...
deputy# burncd -f /dev/acd0c -s 1 data /home/matt/devel/monodevel/cd.iso fixate
next writeable LBA 0
writing from file /home/matt/devel/monodevel/cd.iso size 12064 KB
only wrote -1 of 32768 bytes err=5
fixating CD, please wait..
burncd: ioctl(CDR
I ended up having to move /usr/ports out of the way and doing a fresh
cvsup. I am not sure why but this fixed it.
On Thu, 2 Sep 2004 23:22:26 +0100, Steve Hodgson
<[EMAIL PROTECTED]> wrote:
> On Thursday 02 September 2004 19:34, Dan Finn wrote:
> > [ root @ stewie : /usr/ports/sysutils/portupgrad
In the last episode (Sep 02), Dan Nelson said:
> In the last episode (Sep 02), Danny MacMillan said:
> > I googled for this but I couldn't find an answer.
> >
> > What is the largest number of files that can exist in a single
> > directory in FreeBSD? I ask because I'm using courier-imap using a
In the last episode (Sep 02), Danny MacMillan said:
> I googled for this but I couldn't find an answer.
>
> What is the largest number of files that can exist in a single
> directory in FreeBSD? I ask because I'm using courier-imap using a
> Maildir mailbox and I started seeing all kinds of error
On Thu, Sep 02, 2004 at 04:40:43PM -0600, Danny MacMillan wrote:
> Hi.
>
> I googled for this but I couldn't find an answer.
>
> What is the largest number of files that can exist
> in a single directory in FreeBSD? I ask because
> I'm using courier-imap using a Maildir mailbox
> and I started s
Seeking senior applicaiton architect to assist with
the development of windows / *NIX application and
messaging bus.
please respond you know of a good forum (other then
newspaper) for looking or posting.
Thanks
__
Do you Yahoo!?
New and Improv
Hi.
I googled for this but I couldn't find an answer.
What is the largest number of files that can exist
in a single directory in FreeBSD? I ask because
I'm using courier-imap using a Maildir mailbox
and I started seeing all kinds of errors when
trying to copy more than 16383 messages into one
o
Scott Gerhardt <[EMAIL PROTECTED]> wrote:
> I am noticing that startup scripts in /usr/local/etc/rc.d are now being
> initiated from /etc/rc.conf with the enable="YES" invocation. See
> example from /usr/loccal/etc/rc.d/clamav-clamd.sh below, which I just
> installed from ports.
>
> Besides usi
hello!
I have a router on LAN, connected to internet via DSL. there is another server on LAN,
running local IRC. Now, i would like to enable users from internet to connect to LAN
IRC via router. Router has a DNS registered domain,so it is accesible from all around
the world. now only thing I do
On Thu, 2 Sep 2004, Daan Vreeken [PA4DAN] wrote:
> On Thursday 02 September 2004 05:53, Will Lieu wrote:
> > Hello,
> >
> > I was just wondering if FreeBSD is going/does it support the following
> > Wireless USB Adapter: Netgear MA111. If not do you know where I can get
> > the drivers for th
On Thursday 02 September 2004 19:34, Dan Finn wrote:
> [ root @ stewie : /usr/ports/sysutils/portupgrade] : portupgrade ruby
> [Failed `Inappropriate file type or format'] [Updating the portsdb
> in /usr/ports ... - 11725 port entries found
> .1000.2000.3000.4000...
In the last episode (Sep 02), DanGer said:
> when i trying to use the command 'lastcomm danger (or any other
> username or command)' i just get this error:
>
> [EMAIL PROTECTED] /var/account]$ lastcomm danger
> lastcomm: /var/account/acct: Unknown error: 0
>
> but when i use 'lastcomm' as s
I checked, nanobsd is only in -current.
http://www.freebsd.org/cgi/cvsweb.cgi/src/tools/tools/nanobsd/
tomdean
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROT
I will like to know about the support of FreeBSD in Smart Link Modems!
The 5.3 FreeBSD version has support it?
No?
Then, how can i to support it?
Thanks!
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To uns
I am noticing that startup scripts in /usr/local/etc/rc.d are now being
initiated from /etc/rc.conf with the enable="YES" invocation. See
example from /usr/loccal/etc/rc.d/clamav-clamd.sh below, which I just
installed from ports.
Besides using the kill/killall methods, what is the preferred STO
Hello freebsd-questions,
when i trying to use the command 'lastcomm danger (or any other
username or command)' i just get this error:
[EMAIL PROTECTED] /var/account]$ lastcomm danger
lastcomm: /var/account/acct: Unknown error: 0
but when i use 'lastcomm' as standalone command i get a lots
Look at PHK's nanoBSD. Under -current ( or 5.x???)
src/tools/tools/nanobsd
tomdean
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
On Wed, Sep 01, 2004 at 10:50:38AM -0400, mailing lists at MacTutor wrote:
> Checkout /usr/ports/misc/porteasy
>
> It might be just what you're looking for.
>
> Alex
devel/portcheckout is something similar. You can use it to install
ports+dependencies without having a local copy of the ports tr
To be removed from this list send a blank email to
[EMAIL PROTECTED]
Looking for
TEKNION TOS frames
65 high, 30, 36 and 48 widths.
Also need peds.
Black paint.
Michael Krause 360-374-4090
[EMAIL PROTECTED]
Bill Sperry 360-374-4090
[EMAIL PROTECTED]
Joyc
Ok, I answer myself:
I get this achieved by installing port in /usr/port/sysutils/lookupd which emulates
nsswitch resolver. After that i made a symlink in /usr/local/lib from lkpd_nss.so.1 to
nss_dns.so.1 and all seems to work.
hope this will help.
regards,
Santo Natale
On Wed, Sep 01, 2004 at 0
Hi.
I'm away from Friday 3rd September through to Friday 10th September. It is
unlikely that I will read email received during this period, so either
re-send your email after 10th, or call +44 7967 223790 if urgent.
Thanks
___
[EMAIL PROTECTED] maili
> Greetings:
>
> My goal is to make a minimal install of FBSD on a 256 MB sandisk
> memory card. I have a usb card reader and I was wondering if there
> exists any instructions on how to perform the install out on the web.
> I tried googling for it and found nothing useful.
I've performed this:
Greetings:
My goal is to make a minimal install of FBSD on a 256 MB sandisk memory card. I have
a usb card reader and I was wondering if there exists any instructions on how to
perform the install out on the web. I tried googling for it and found nothing useful.
Any thoughts,
Brian
__
On Thu, 02 Sep 2004, joshua wrote:
> Hi, all
> I found there is a directory named /var/spool/clientmqueue and many
> many file below this directory, what's use of this directory and the
> files under it?
> thanks.
>
From SECURITY.gz you get:
[...]
Mail will end up in the client queue if t
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
On Thu, 2 Sep 2004, Curtis Vaughan wrote:
On 5.3-Beta I have installed pam_ldap and nss_ldap.
Then I edited the following files:
/usr/local/etc/ldap.conf
/etc/nsswitch.conf
files within /etc/pam.d
particularly /etc/pam.d/ldap and ./sshd and ./su
/usr/lo
On 2004-09-02 17:41, Matthew Seaman <[EMAIL PROTECTED]> wrote:
> On Thu, Sep 02, 2004 at 03:34:25PM +, [EMAIL PROTECTED] wrote:
> > Can periodic be used to get a summary of successful logins? Is there
> > a different utility that exists?
>
> The command to use is last(1) -- note by default that
--- "Jorge Mario G." <[EMAIL PROTECTED]> wrote:
> Hi there guys
Hi Jorge!
> look this links has a great how to
> http://www.freebsddiary.org/ibm-thinkpad-t41.php
Yup, I found that and have been trying to hack my way through that
procedure, as well as another, similar one that Radek suggested. The
On Mon, 30 Aug 2004 08:40:00 -0400, Louis LeBlanc
<[EMAIL PROTECTED]> wrote:
> Well, it's probably not an old BOIS, since the machine is less than 3
> months old. I checked the BIOS after the system locked up, and it was
> enabled. I disabled it, and still couldn't boot until I used the
> generic
Hi there guys
look this links has a great how to
http://www.freebsddiary.org/ibm-thinkpad-t41.php
also instead of fetching the you could retrive the
sources using cvsup
just get usr-sys and usr-sbin
Jorge
=
_
Do You Yahoo!?
Informa
From /var/log/xdm.log:
:27: unterminated #if
xdm error (pid 788): Unable to stat() pixmap file /usr/X11R6/lib/X11/xdm/pixmaps
/XFree86.xpm
Hpwever:
[EMAIL PROTECTED]>> dir /usr/X11R6/lib/X11/xdm/pixmaps
drwxr-xr-x 2 root wheel512 Sep 2 14:19 .
drwxr-xr-x 4 root wheel
On 5.3-Beta I have installed pam_ldap and nss_ldap.
Then I edited the following files:
/usr/local/etc/ldap.conf
/etc/nsswitch.conf
files within /etc/pam.d
particularly /etc/pam.d/ldap and ./sshd and ./su
/usr/local/etc/nss_ldap.conf
I think that's it. I can provide each of those files if necessar
[ root @ stewie : /usr/ports/sysutils/portupgrade] : portupgrade ruby
[Failed `Inappropriate file type or format'] [Updating the portsdb
in /usr/ports ... - 11725 port entries found
.1000.2000.3000.4000.5000.6000.7000.8000/usr/loc
Hello,
We are .NET, J2ME and Web software development company from Russia
and we are interested in possible collaboration with your company.
What we can offer:
1. Cost effective development of J2ME and SMS games and software.
2. Java, C#, C++ and PHP software development outsourcing.
I'm attempting to install jdk1.4 from /usr/ports/java/jdk14 and have no
problem compiling any of the pre-reqs, but when it gets to compiling the
actual jdk14 I get the error listed at the bottom. Floating around
google and some irc rooms hasn't helped much. I cvsup'd the ports
collection befo
Hi
I have the following concatenated array:
3 drives:
D vinumdrive0 State: up /dev/ad2A: 0/152627 MB (0%)
D vinumdrive1 State: up /dev/ad3A: 0/152627 MB (0%)
D vinumdrive2 State: up /dev/ad1A: 0/152627 MB (0%)
1 volumes:
V v
Am Donnerstag, 2. September 2004 17:09 schrieb DanGer:
> Hello freebsd-questions,
>
> is the 'xl' network card supported to use the
> OPTIONS DEVICE_POLLING ?
man (4) polling doesn't list the xl driver and the xl manpage also doesn't
mention polling so I guess it's not supported.
-Harry
vola wrote:
I have a question.
Not long ago i have download the FreeBsd 4.10 operetion system.
By the installation i have problems.
I put the cd into the cd-rom and I restarted the computer.
The computer boot from the cd and the installation began.
It looks all ok - the computer was loading. Bu
On Thu, Sep 02, 2004 at 03:34:25PM +, [EMAIL PROTECTED] wrote:
> I'm currently running FreeBSD 4.10 on a machine at home. Since it is exposed to the
> internet (and since I am the only one who should be logging into it), I would like
> to have a summary log of all logins (both failed and succ
On Thursday 02 September 2004 01:45 am, Philip Payne wrote:
> > > Well, png is up to png-1.2.5_8 and if you did a recent cvsup and
> > > recreated your INDEXs, that is what you should be seeing.
> >
> > OK, portupgrade(1) _is_ looking for 1.2.5_8 but it is trying to get it
> > from
> > ftp://ftp.fr
I've got a new server coming in and I have no interest in putting 4.10
on it. I'm comfortable with 5.2.1 - but i'm wondering what the upgrade
from 5.2.1 to 5.3 will be like once 5.3 hits stable. I'm considering
running 5.3 beta for a month, but I would prefer 5.2.1 if the upgrade
will be trivial.
I'm currently running FreeBSD 4.10 on a machine at home. Since it is exposed to the
internet (and since I am the only one who should be logging into it), I would like to
have a summary log of all logins (both failed and successful).
"periodic" shows the the failed logins in the daily summary, bu
Hello freebsd-questions,
is the 'xl' network card supported to use the
OPTIONS DEVICE_POLLING ?
--
Best regards
+==/\/\==+
| DanGer <[EMAIL PROTECTED]> or |
| [EMAIL PROTECTED] | ICQ: 261701668 |
| http://ns1.wilbury.sk/~danger/ |
+==\/\/==--
I think if you read my tutorial, there should be enough information
to figure that out.
Basically, you need to go to the ports archive and figure out
the dependencies heirarchically.
That is described in the tutorial. If it's not clear, let me know
where you are having troubleso I can revise it.
On Wed, 1 Sep 2004 09:59:38 -0400
"Ralph Hempel" <[EMAIL PROTECTED]> wrote:
>> Hi,
>> is there a way to install only parts of the ports tree to set
>> them up ? The ports tree takes 237M up :(
>> Have only 600M hd space available included swap.
>> The purpose is to setup a firewall/router/proxy
> I'm using natd and doing port redirection with a natd.conf file. I
> have a
> mission to accomplish this week last sec. O NO...
Ok, off the top of the head...
Can you run a separate instance of natd, on a separate port, and use
IPFW to properly filter? For instance:
ipfw 10 divert 8669 all fro
First of all, put a meaningful subject on your messages.
Most of the people on this list are very busy volunteers
who have to scan the message subjects and choose only those
that seem to have meaning. A message with no subject is most
likely to be ignored/deleted without reading.
> I have a qu
On Wed, Aug 31, 2005 at 10:55:04PM -0700, vola wrote:
> I have a question.
> Not long ago i have download the FreeBsd 4.10 operetion system.
> By the installation i have problems.
> I put the cd into the cd-rom and I restarted the computer.
> The computer boot from the cd and the installation be
After seeing several posts recently on portindex, I decided to try it
out. Most of the posts claimed you had to run portsdb -u after
portindex.
Is it safe to use portindexdb instead of portsdb -u?
Another words I want to do this:
cvsup ...
portindex
portindexdb
portversion -v | grep "<"
Lucas H
--- Radek Kozlowski <[EMAIL PROTECTED]> wrote:
> On Wed, Sep 01, 2004 at 07:04:36PM -0700, John DeStefano wrote:
> > Yes; thanks, that's where this all started... problem for me is I
> don't
> > have a /sys/modules/ndis directory (or even sys/compat/ndis), even
> > though I have installed 5.2.1-RE
You should try to disable ata dma. Press any key(besides enter) when you
see the following message:
Hit [Enter] to boot immediately, or any other key for command prompt.
then type
set hw.ata.ata_dma=0
boot
That should fix -I mean you 'll be able to boot your system- the problem, but
disk access
On Thu, Sep 02, 2004 at 03:09:21PM +0800, joshua wrote:
> I found there is a directory named /var/spool/clientmqueue and many
> many file below this directory, what's use of this directory and the
> files under it?
That's part of the workings of sendmail. /var/spool/clientmqueue is
the holdin
I installed FreeBSD on a Compaq server a whhile back with thier RAID
contloer. Last night it crashed, and when I looked at the console, it was
in the Raid BIOS, with a message about a drive that had previously been
bad, now being good..
Are their any tools that I can use in FreeBSD to determine th
--- Radek Kozlowski <[EMAIL PROTECTED]> wrote:
> On Wed, Sep 01, 2004 at 06:10:29PM -0700, John DeStefano wrote:
> > I'm trying to install the ndiswrapper package to enable support for
> my
> > NIC (onboard or wireless).
> Ndiswrapper is a linux project. The thing you're probably looking for
> is
>
On Thu, 2 Sep 2004, [gb2312] joshua wrote:
> Hi, all
> I found there is a directory named /var/spool/clientmqueue and many
> many file below this directory, what's use of this directory and the
> files under it?
> thanks.
When submitting mail by using sendmail as a mail submission program,
s
I have a similar setup, FreeBSD, Fedora and a win2k
box.. My Fedora is a client without a mout and
keyboard.. I have a file with the command "synergyc
-n IP_address_of_Client/Fedora
IP_address_of_Synergy_Server
Move this file into your init.d directory and then
make a link to your systems normal
On Thu, Sep 02, 2004 at 02:47:26PM +0300, Ilker Ozupak wrote:
> Due to firewall restrictions i am unable to use cvsup.
> Network admin has accepted my request for permisson and will make
> some changes to the firewall.
>
> question : which ports are needed for cvsup? is it just 2401?
No -- 2401
Hi, all
I found there is a directory named /var/spool/clientmqueue and many
many file below this directory, what's use of this directory and the
files under it?
thanks.
=
Joshua Yu
MSN: joshuayuAThotmail.com
YAHOO MESSENGER: cigant
I have a question.
Not long ago i have download the FreeBsd 4.10 operetion system.
By the installation i have problems.
I put the cd into the cd-rom and I restarted the computer.
The computer boot from the cd and the installation began.
It looks all ok - the computer was loading. But then had s
Short answer: don't set vinum.autostart
Long answers: 5.x contains code to discover all attached disk drives
whereas 4.x does not. Hence 4.x needs to be told were to look for disks
(that's the vinum.drives setting). Vinum.autostart just tells 5.x to
run the discovery code.
Bob
On Thu,
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
hello list,
Due to firewall restrictions i am unable to use cvsup.
Network admin has accepted my request for permisson and will make
some changes to the firewall.
question : which ports are needed for cvsup? is it just 2401?
- --
IO
- --
gpg publi
Subhro <[EMAIL PROTECTED]> wrote:
> I also faced the same problem with my packet filtering bridge. I
> wanted plug in a third NIC and assign an IP to in in order to perform
> remote administration from within the LAN. But I have come to the
> conclusion that if you start to bridge ( read put up a g
>On Thu, Sep 02, 2004 at 07:58:05AM +, [EMAIL PROTECTED] wrote:
>> I am experiencing strange things. When my system boots the screen is
>>overrun with " " " marks everywhere and as it loads the words on the screen
>>are all misspells as do the command's when I type them in, they still give
Will Lieu wrote:
Hello,
I was just wondering if FreeBSD is going/does it support the following
Wireless USB Adapter: Netgear MA111. If not do you know where I can get
the drivers for this? I've searched around around and seemed to come up
empty. Your reply would be greatly appreciated.
I bel
I have two machines infront of me. A FreeBSD 5.2.1 system and a
Gentoo system. The gentoo system has a mouse and keyboard plugged
into it. The FreeBSD system doesn't.
How do I add "synergyc -f onan" to the gdm startup script. I would
rather use gdm, because I don't want to install qt/kde on th
On Thu, Sep 02, 2004 at 07:58:05AM +, [EMAIL PROTECTED] wrote:
> I am experiencing strange things. When my system boots the screen is overrun with "
> " " marks everywhere and as it loads the words on the screen are all misspells as do
> the command's when I type them in, they still give the
On 2004-09-01 21:48, Chip <[EMAIL PROTECTED]> wrote:
>Giorgos Keramidas wrote:
>>On 2004-08-30 06:44, Chip <[EMAIL PROTECTED]> wrote:
>>>I am running FreeBSD-5.2.1 and installed the email client Mahogany from
>>>the package yesterday. When I run it it crashes with this message -
>>>
>>>bash-2.05b$
Hi,
back with another episode in this continuing saga:
On Sun, Aug 29, 2004 at 04:26:57PM +0200, Stijn Hoop wrote:
> Witness this (after yet another fake disk crash):
>
> %%%
>
> vinum -> ls -v local.p0.s0
> Subdisk local.p0.s0:
> Size: 31457129472 bytes (2 MB)
>
Gerard Seibert (gerard-seibert) writes:
>
> Therefore, my question is do I force the deletion of kdepim-3.2.3_1 so that I
> can install the kdelibs-3.3.0 update? Would this prove to be a bad move?
> Also, why doesn't the new library simply replace the old one without having
> to remove anything
[EMAIL PROTECTED] / $ uname -a
FreeBSD rcn.com 5.2.1-RELEASE FreeBSD 5.2.1-RELEASE #0: Mon Feb 23 20:45:55
GMT 2004 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386
I updated my ports, ran portsdb -Uu and then proceeded to run 'portupgrade
-aDDPRrv' to finish the update.
Everything went
On Thursday 02 September 2004 05:53, Will Lieu wrote:
> Hello,
>
> I was just wondering if FreeBSD is going/does it support the following
> Wireless USB Adapter: Netgear MA111. If not do you know where I can get
> the drivers for this? I've searched around around and seemed to come up
> empty.
> > Well, png is up to png-1.2.5_8 and if you did a recent cvsup and
> > recreated your INDEXs, that is what you should be seeing.
>
> OK, portupgrade(1) _is_ looking for 1.2.5_8 but it is trying to get it
> from
> ftp://ftp.freebsd.org/pub/FreeBSD/ports/i386/packages-4.9-release/All
> where the v
I am experiencing strange things. When my system boots the screen is overrun with " "
" marks everywhere and as it loads the words on the screen are all misspells as do the
command's when I type them in, they still give the expected response thought. I cannot
figure this out do you have any Idea
Dear list,
I am using 4.10R and want to set up a mirrored / using vinum.
I am confused by the note in section 17.9.1 of the handbook stating that
the following paragraphs only apply to 5.x and refer to 17.9.5 for 4.x
configuration.
Do I have to set just vinum_load, vinum.drives, and vinum.roo
98 matches
Mail list logo
