Wojciech Puchar wrote:
At the loader prompt I also entered
set hw.ata.atapi_dma=0
I get this error at the Install GUI when it is reading each package
from the disc
Seek failed: Invalid argument
Then about half way through the install I get a message
An error occurred while extracting the
I am unable to install FreeBSD because of the following error
acd0: FAILURE - READ BIG_MEDIUM ERROR asc=0x21 ascq=0x00
The computer reboots during install.
I have read that this error can be due to the DVD drive being a master,
as it is a SATA drive it is assigned as a master in the BIOS
Is
Wojciech Puchar wrote:
enter bootloader prompt (6) and type
set hw.ata.atapi_dma=0
boot
On Sun, 21 Dec 2008, Ivan Carey wrote:
I am unable to install FreeBSD because of the following error
acd0: FAILURE - READ BIG_MEDIUM ERROR asc=0x21 ascq=0x00
The computer reboots during install.
I have
Hello,
I have a Gigabyte GA-965P-DS3P motherboard.
I am having troubles installing and running FreeBSD.
What are the preferred BIOS settings for this motherboard
Thanks,
Ivan
___
freebsd-questions@freebsd.org mailing list
simon butsana wrote:
Hi,
Does anyone know of a remote X client that can be used to establish a remote X session with a FreeBSD box.
As an example, I would greatly like to test a tool with features similar to Microsoft's Remote Desktop.
Thanks,
Simon
Roger Olofsson [EMAIL
Bruce Caruthers wrote:
Hi, all.
I am in the process of replacing my old, formerly
solidly reliable 4.2 RAID server. I've been eyeing
the Intel DG965WH motherboard and its kin, but from
my searches of the mailing list archives, it seems
unclear whether it will work. There were several
postings
VeeJay wrote:
Hi fellows
I have two computers with FreeBSD 6.2 with minimum installation. (Without
Ports distribution in /usr). I don't have any /usr/ports
But if I want to install mysql or Perl, what method I should use, in
absence
of ports directory?
How can I install mysql or Perl on my
Ivan Carey wrote:
Erik Trulsson wrote:
On Tue, Jul 10, 2007 at 03:01:44PM +1000, Ivan Carey wrote:
Hello,
I am using FreeBSD 6.2 Release
When I run shutdown on my server it stays on and says:
The operating system has halted
Please press any key to reboot
Is it possible to have the server
Hello,
I am using FreeBSD 6.2 Release
When I run shutdown on my server it stays on and says:
The operating system has halted
Please press any key to reboot
Is it possible to have the server turn off?
Thanks,
Ivan
___
freebsd-questions@freebsd.org
Erik Trulsson wrote:
On Tue, Jul 10, 2007 at 03:01:44PM +1000, Ivan Carey wrote:
Hello,
I am using FreeBSD 6.2 Release
When I run shutdown on my server it stays on and says:
The operating system has halted
Please press any key to reboot
Is it possible to have the server turn off
Cheffo wrote:
Hi list,
I have server running postfix + courier-imap, and I'm looking for
someway to add possibility to exchange calendars/contacts/meeting
invitations/etc between mail clients.
Can someone recommend calendar, that is compatible with windows
clients and can be run under
Jonathan Horne wrote:
On Sunday 24 June 2007 07:18:56 Ivan Carey wrote:
Hello,
How do I setup FreeBSD 6.2 to allow a UPS to shutdown a system via a USB
port.
I may be using a Powerware UPS, I'm not sure which one yet.
Thanks,
Ivan
___
freebsd
Hello,
How do I setup FreeBSD 6.2 to allow a UPS to shutdown a system via a USB
port.
I may be using a Powerware UPS, I'm not sure which one yet.
Thanks,
Ivan
___
freebsd-questions@freebsd.org mailing list
Jack Barnett wrote:
Ivan Carey wrote:
Jack Barnett wrote:
FreeBSD 6.2
Apache 1.3.37 (from ports)
php 5.2.3 (from ports)
on the command line doing `php index.php` works.
But if I use it though a web browser it just displays the php code.
I installed it like this (extensions to)
http
Jack Barnett wrote:
[LoN]Kamikaze wrote:
Jack Barnett wrote:
Jack Barnett wrote:
Eric Crist wrote:
On Jun 20, 2007, at 8:56 PMJun 20, 2007, Jack Barnett wrote:
Ivan Carey wrote:
I don't have libphp5.so anywhere in /usr/local (did a find for
it).
the php5 port
Jack Barnett wrote:
FreeBSD 6.2
Apache 1.3.37 (from ports)
php 5.2.3 (from ports)
on the command line doing `php index.php` works.
But if I use it though a web browser it just displays the php code.
I installed it like this (extensions to)
Norberto Meijome wrote:
On Fri, 08 Jun 2007 18:34:33 +1000
Ivan Carey [EMAIL PROTECTED] wrote:
It happens with all blank dvd -r
It also happened when writing to cd-r in k3b . The disk was written to
but when the verification ot the files written th error occured. The
files
Hello,
I am unable to mount a DVD-R disk, I get this error mount_cd9660:
/dev/acd0: input/output error.
Also when using K3B I get a similar error
I am using 6.2 release and have installed dvd+rw-tools-6.1
Thanks,
Ivan
___
Norberto Meijome wrote:
On Fri, 08 Jun 2007 17:10:46 +1000
Ivan Carey [EMAIL PROTECTED] wrote:
I am unable to mount a DVD-R disk, I get this error mount_cd9660:
/dev/acd0: input/output error.
Ivan,
does it happen with this one particular disc, or with several (of different batches
Hello
I have a server board with 2 onboard nic's
I have set them up in rc.conf as follows
defaultrouter=192.168.1.1
network_interfaces=em0 em1 lo0
ifconfig_em0=inet 192.168.1.3 netmask 255.255.255.0
ifconfig_em1=inet 192.168.1.4 netmask 255.255.255.0
The question, is this the correct
Tom Judge wrote:
Ivan Carey wrote:
Hello
I have a server board with 2 onboard nic's
I have set them up in rc.conf as follows
defaultrouter=192.168.1.1
network_interfaces=em0 em1 lo0
ifconfig_em0=inet 192.168.1.3 netmask 255.255.255.0
ifconfig_em1=inet 192.168.1.4 netmask 255.255.255.0
Hello,
After installing a new system on a 500Gb HDD the partition size I
allocated at install does no match the size after complete system
installation
Disc size comes up as 476937MB
At install I partitioned the disc:
/ 2048Mb
/swap 4096Mb
/var2048Mb
/server 440Gb
Hello,
What would be the best Kernel options to run a file server?
I will be using an Intel server mother board with one Xeon quad core CPU
installed (this mother board has 2 CPU sockets) 2GB RAM and dual 500Gb
SATA HDD's
I am thinking of options that would make the kernel efficient as a pure
Hello,
I would like to be able to access my network remotely via modem access.
What I am trying to achieve is this. At the office I have a server, this
server is Not connected to the Internet, I need to be able to Administer
it from my Home office, so I am thinking that I need to access it via
Hi,
Does FreeBSD 6.2 support Quad-Core Intel Xeon 5310 CPU and an Intel Xeon
5320 quad core CPU
Regards,
Ivan
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
Andriy Babiy wrote:
I am debugging a (seemingly) KDE-related problem on a FreeBSD laptop.
The version of FreeBSD is 6.1-RELEASE-p10 #0. I am starting in in
debug mode. It is using kdm as a login screen. The corresponding line
in /etc/ttys is
ttyv8 /usr/local/bin/kdm -nodaemon xterm on secure
[EMAIL PROTECTED] wrote:
On Mon, 16 Apr 2007, Joe Vender wrote:
Hi,
Is there a GUI interface to the FreeBSD
ports collection for use in kde similar to synaptic or adept?
Joe Vender
That's coming soon. I'd check out the FreeBSD SoC page; Andrew, the
developer's listed at the top of the
Daniel Marsh wrote:
On 4/17/07, Ansar Mohammed [EMAIL PROTECTED] wrote:
How can I stop ppp from modifying my /etc/resolv.conf?
Everytime I establish a pppoe session, my resolv.conf file gets
reconfigured
to my ISPs DNS Servers.
You could make resolv.conf to what you want it to be and then
Hello,
Is hot swap of a drive possible with gmirror?
Also is it possible to setup a spare mirrored drive and store it until
it is needed to replace a faulty drive.
Thanks,
Ivan
___
[EMAIL PROTECTED] mailing list
Hello,
Is it possible to have more than 2 drives in a mirror?
For example traditionally a mirror will have 2 drives, can 4 drives be
in a system and all be mirrored by gmirror?
Thanks,
Ivan
___
[EMAIL PROTECTED] mailing list
[EMAIL PROTECTED] wrote:
On Tue, 10 Apr 2007, Sean Murphy wrote:
I am having troubling installing FreeBSD 6.2 Release on and Intel
DG965OT
http://www.intel.com/products/motherboard/DG965OT/index.htm
Which uses the Intel® G965 Chipset
I have checked under the following link but it does not
Taavi Tänavsuu wrote:
Hi,
Got a brand new Samsung 250 GB IDE harddisk, added it to my home PC
running
FreeBSD 5.3, created FreeBSD filesystem there. I have been using it for
several months, keeping relatively large (5-10 GB) home video files
there,
and it has been working fine.
But now
Hello
Does FreeBSD 6.2 release support the Intel® Server Board S5000VSA,
http://www.intel.com/design/servers/boards/s5000VSA/index.htm with a
Xeon 5110 processor.
Also is the Intel® Embedded Server RAID Technology II supported.
I have done an extensive search and read the release notes but I
Original Message
Subject:Intel® Server Board S5000VSA support
Date: Fri, 06 Apr 2007 17:57:56 +1000
From: Ivan Carey [EMAIL PROTECTED]
Reply-To: [EMAIL PROTECTED]
To: freebsd-questions@freebsd.org
Hello
Does FreeBSD 6.2 release support the Intel
Hello
Does FreeBSD 6.2 release support the Intel® Server Board S5000VSA,
http://www.intel.com/design/servers/boards/s5000VSA/index.htm with a
Xeon 5110 processor.
Also is the Intel® Embedded Server RAID Technology II supported.
I have done an extensive search and read the release notes but I
Alexander Anderson wrote:
Tue, Apr 03, 2007 at 05:22:22 PM, Ivan Carey wrote:
Is there hardware support for this Motherboard Intel DG965OT Motherboard
in FreeBSD 6.2 I have read the Hardware notes but am unable to determine
if FreeBSD 6.2 is compatible with Intel DG965OT Motherboard
Is there hardware support for this Motherboard Intel DG965OT Motherboard
in FreeBSD 6.2 I have read the Hardware notes but am unable to determine
if FreeBSD 6.2 is compatible with Intel DG965OT Motherboard and the on
board Martix Storage Technology
I would like to setup a Raid 1
In FreeBSD 5.3 I have set up 2 drives in RAID-1 format.
How will I know if one of the drives is faulty such as either not working or
has some lost sectors?
Is it possible to have gmirror email me if there is a problem?
Thanks,
Ivan
___
Hello,
I'm using FreeBSD 5.3
When I try to reboot the pc with shutdown -r now the system gets as far as
rebooting and hangs there. Is there maybe a setup in the bios to allow the
pc to reboot.
Thanks,
Ivan
___
freebsd-questions@freebsd.org mailing
Hello,
I'm using FreeBSD 5.3
I'm using a MC2050, MC2060 2 port auto kvm switch.
My mouse does not work either at the console or in KDE, the keyboard is ok.
Is there a command I need to place into the kernel to get the mouse driver
to recognise the mouse via the KVM switch?
Thanks,
Ivan
Hello,
Could someone please tell me of a good hosting provider located in
Melbourne.
My basic requirements:
Australia, preferably Melbourne based FreeBSD servers.
Good and flexible support.
Ability to add ports as necessary
Usual PHP, MySQL, Apache
Thanks,
Ivan
Hello
I am using FreeBSD 4.7 and have updated my ports tree.
I am having a problem with making php4.3.7 with gd 2.0.25.
I have installed gd first
The compilation of php stops with the following:
/usr/ports/lang/php4/work/php-4.3.7/ext/gd/libgd/gdft.c: In function
`gdImageStringFTEx':
Hello
I am using FreeBSD 4.7 and have updated my ports tree.
I am having a problem with making php4.3.7 with gd 2.0.25.
I have installed gd first
The compilation of php stops with the following:
/usr/ports/lang/php4/work/php-4.3.7/ext/gd/libgd/gdft.c: In function
`gdImageStringFTEx':
attached my setup files
Thanks,
Ivan Carey
www.users.bigpond.com/icarey
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
44 matches
Mail list logo