it is and
how it works.
/usr/share/doc/psd/20.ipctut/paper.ascii.gz may help.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
by telnet or ssh)
You might have a chance to see where problems occur. Or to repost your
question with relevant sections of the output included.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg
the data by using tar, to create a new ffs
in that partition and to restore the data.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
}
echo '.'
Thus the scripts are executed in alphabetic order.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
aren't disabled in the BIOS setup? Sorry for using
the word 'Linux', but I'm not fanatic. Maybe you could try to boot a Linux
kernel from CD (Knoppix or so?) and watch what happens?
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
to be opened and not closed?
I'd suggest lsof from /usr/ports/sysutils/lsof which listens all open
files in the system.
Regards
Konrad
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg
I'd like to know whether somebody has a 4.x or 5.x system running with a
133 MHz PCI bus Qlogic fibre channel adapter. Which model is used, and how
well does it perform?
Thanks for any reply.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
-w kern.maxfilesperproc=the_number_you_need
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
isn't as it was years ago I still like slackware.
It is a BSD oriented distribution and its way of administration is
familiar for FreeBSD admins. That's my opinion.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
, and they do fine.
I studied the documentation of my drive which explains the Vendor
Specific ASCQ im some way so that I got the idea to use other tapes.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am
Does anyone successfully run VMware 3 on 5.2-R? After upgrading from 5.1-R
to 5.2-R my system crashes shortly after VMware begins to initialize.
The modules vmmon etc. have been rebuild after the upgrade.
Thanks for any hint.
Konrad
Konrad Heuer ([EMAIL PROTECTED
system fails while trying to page in
from the text segment of httpd which resides in the file system on ad0s1f.
I would buy a new hard disk and copy your data before it's too late.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
and thus don't make use of LDAP user information.
Regards
Konrad
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
the system is running. That's possible
because soft updates also help to minimize the relevancy of
inconsistencies. In FreeBSD 4.9 and earlier, a filesystem check is
inevitable if the file system is dirty.
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
manager code into the master boot record
before you installed FreeBSD. You have to boot Linux from floppy or CD now
once; then you have to install lilo into the Linux root partition. After
that, you should be able to boot your Linux system by the FreeBSD boot
manager.
Regards
Konrad Heuer ([EMAIL
release
with full ldap login support.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
like 10., 172.16.-172.31. or 192.168.1.-191.168.254., you should
use natd instead of routed on the server connected to the world outside.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg
problem.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
and copy /etc/rc.sendmail to
/usr/local/etc/rc.d/zzz.sendmail (or whatever else is the last filename
when sorted alphabetically) and modify it a little bit since you have to
reset sendmail_enable in this script to start sendmail in the right way.
Best regards
Konrad Heuer ([EMAIL PROTECTED
and writing data and calling mmap.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
the fastest way to copy everything?
cd /to/target/directory
tar cCf /cdrom - . | tar xvpf -
Regards
Konrad Heuer
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
-
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
; it contains a rather voluminous log
written by XFree86. You may find a reason there why modes other than
640x480 are excluded.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg
working.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
To Unsubscribe: send
with a vendor specific SCSI extension, afaik.
The tape drive is made by Benchmark.
Thanks for any idea that may help!
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg
in the disk; the number of inodes will grow, too.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
need the right sources.
Any help on this subject would be very welcome!
Scottman
After fetching the source packages manually you must copy them to the
/usr/ports/distfiles directory; some ports use specific subdirectories
within /usr/ports/distfiles.
Regards
Konrad Heuer ([EMAIL PROTECTED
of
cupsd, the command shown by ps may be something like
/usr/local/sbin/cupsd which may extend beyond column 80.
Don't know whether that's the case here, but may be.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am
=YES
FreeBSD will then run a sendmail daemon listening on the loopback
interface for mail submission only. This sendmail process will not be
visible from external hosts and will not receive any mail.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
:
example.org 192.168.1.25
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
=/var/spool/lpd/mainoffcanon:\
:mx#0:\
:sh:
# PRINTER2 END
Thank you in advance for your help!
This looks like /etc/printcap and seems to be o.k. But where's your
smb.conf?
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
Virtually, this is no question for freebsd-questions -- but are there any
problems with {daily,ezine,www}.daemonnews.org? [as you see, I love tcsh
:-) ]
I can't connect to 204.152.186.46 anymore.
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
.
tar will cd to /disk2 before interpreting the dot - thus the content of
/disk2 will be archived, but without a leading disk2 in the table of
contents.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg
/output error
# Thanks
Your floppy drive should do. Please try
dd if=/dev/fd0 of=/dev/null
to check whether it really does. If your floppy is MS-DOS formatted, try:
mount -t msdos /dev/fd0 /mntmount
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
Identifier Screen0
Device Card0
MonitorMonitor0
Try to insert
DefaultDepth 16
or
DefaultDepth 24
here!
SubSection Display
Depth 1
EndSubSection
(...)
Best regards
Konrad Heuer ([EMAIL PROTECTED
by hands.
Any ideas ?
What about the following shell script? Should work for you, if you replace
192.168.1 by your real network address:
#!/bin/tcsh
@ n = 1
while ( $n 255 )
echo 192.168.1.$n /etc/hosts.lpd
@ n ++
end
Best regards
Konrad Heuer ([EMAIL PROTECTED
, and reboot the system.
Regards
Konrad
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
On Tue, 3 Jun 2003, Chuck Swiger wrote:
Konrad Heuer wrote:
[ ... ]
As far as I see there is little chance to do this without carefully
restarting all processes, e.g. by shutting down into single user mode and
returning to multi user mode.
It is advisable to switch into single-user mode
URL: http://archives.neohapsis.com/archives/bugtraq/2003-05/0331.html
Are there any opinions out there regarding the question how far this
concerns FreeBSD 4-STABLE?
Thanks for any reply.
Best regards
Konrad
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
directory
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
an
existing installation in case of trouble (`fixit CD').
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
the sysinstall program.
After that, the system still runs in single-user mode; you're just able to
repair an existing installation or to do simple tasks with CD #2; I've
never tried to invoke the multi-user mode using this CD.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
of your network adapater.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
while in backup (so
as not to change the /var partion with log-files being filled and such). Is
there not a command to force 'softupdates' to write out its cache
immediately?
I didn't try, but `sync' should do the job, shouldn't it?
Regards
Konrad Heuer ([EMAIL PROTECTED
will change as they always
did.
Best regards
Konrad
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
.
Then to make sure:
fsck -y
mount -a -t ufs
vi /etc/rc.conf
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
On Fri, 25 Oct 2002, William Chan wrote:
card. Both of them have been recognised by kernel as rl0 and rl1.
However, one rl0 uses IPV4, but rl1 is forced to use IPV6.
I have tried the following but no use:
1. run /stand/sysinstall to config rl1 to use IPV4 and to assign an IP to
it
2. add
/dev/fd0 /mnt
Best regards
Konrad Heuer
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
variables.
What 'root variables' are you referring to?
Oh, and by the way, logging in as root over TELNET is not a good idea.
You shouldn't do it, unless you really know that you are safe.
Isn't
su -
what you really need to get a root login shell with all startup files
executed?
Regards
Konrad
On Thu, 28 Nov 2002, Roman Neuhauser wrote:
# [EMAIL PROTECTED] / 2002-11-28 16:14:38 +0200:
Hi People
I want to use FreeBSD as my desktop OS with Gnome but I still need to do
Windows luser support. I have installed Gnome 2 on FreeBSD 4.7 Stable and
now I'm trying to figure out what
the partition withis FreeBSD sysinstall.
I Know that this is not a real solution, but it may be a workaround.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg
a few seconds the print centers opens without any printer, In the system
log, one can see unresolved request for password entry, but you seem to
have no chance to do so.
Any ideas? Anything one can try on the Mac side?
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
get is the setup program. any suggestions?
Is your home directory on a local or NFS-mounted disk volume? Staroffice
5.2 seems to show some strange behaviour when setting up its ~/office52
directory on an NFS-mounted volume.
Regards
Konrad Heuer ([EMAIL PROTECTED
On Mon, 24 Feb 2003, Brian Henning wrote:
what is the difference between these two devices?
fd0 ist a block-oriented device, data are cached in the buffer cache;
rfd0 is a byte-oriented raw device; data are always read from or
immediately written to the device.
Regards
Konrad Heuer ([EMAIL
On Tue, 25 Feb 2003, Mike Meyer wrote:
In [EMAIL PROTECTED], Konrad Heuer [EMAIL PROTECTED] typed:
On Mon, 24 Feb 2003, Brian Henning wrote:
what is the difference between these two devices?
fd0 ist a block-oriented device, data are cached in the buffer cache;
rfd0 is a byte-oriented
machines, but
# non-FreeBSD clients (e.g. SunOS, Solaris (without NIS+), IRIX, HP-UX,
# etc...) will only work properly in 'unsecure' mode.
#
UNSECURE = True
You probably have to set UNSECURE equal to True and to rebuild the maps.
Regards
Konrad Heuer ([EMAIL PROTECTED
to use pam, although I enabled it in
its config file.
Is this a known problem? Any hint?
I never tried by myself, but did you also modify /etc/pam.d/sshd? I think
that would be necessary.
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED
you a command line editor but no further screen
control.
It's more the task of the terminal emulator to do so; in xterm, for
example, you can use Shift+PageUp or Shift+PageDown to scroll.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED
remote filesystems via appletalk.
Mac OS X and Darwin can do so; thus I think, Darwin wood be a good choice
for you.
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
into the MBR. I don't know grub but I
guess, lilo can still be used with SuSE.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo
On Fri, 9 Jul 2004 [EMAIL PROTECTED] wrote:
I have a Compaq 2.7 GHZ @ 500MB ram - can I run FreeBSD on this?
Probably, there won't be a problem in general. Difficulties may arise,
e.g., if your graphics adapter isn't well supported by the X window
system.
Regards
Konrad Heuer ([EMAIL
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen /_/ /_/ \__/\__//___//
Germany
=domain,dc=country?uid
require valid-user
The problem is: CGI scripts called by the HTML pages in the protected
directory don't see a REMOTE_USER environment variable (GET method), so
they don't know about the current user.
Any ideas? I'd greatly appreciate any help.
Best regards
Konrad
Konrad
On Tue, 13 Jul 2004, Konrad Heuer wrote:
I want to use modauthldap with Apache 1.3.29 to restrict access to some
web pages, especially to some dynamic ones generated by cgi scripts.
LDAP authentication seems to work fine with following .htaccess file:
AuthNameRealm:
AuthTypeBasic
to
overcome these problems to install either putty or
secpanel?
Why don't you use just the ssh client that comes with the base system?
Log into your FreeBSD box and type
ssh hostname
to connect to any other system.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
a broken system (fixit cd), miniinst is for a minimal
installation.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
to one and the same file leading
to data loss. That's Unix since the early 1970s, isn't it?
Of course you cannot mount a ufs more than once, but that's because the
kernel needs to manage the buffer cache non-ambiguously to preserve data
consistency in the fs structure.
Regards
Konrad Heuer
GWDG, Am
was running multi-user from the
first disk? I'd expect larger problems then because the file systems
inconsistencies on the second disk may never be resolved.
If you did it in single user mode, a 'fsck -y' for each file system on the
second disk before trying to mount may help.
Best regards
Konrad
/pam.d.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
transfer agent (MTA) copies the messages from
/var/spool/clientmqueue to /var/spool/mqueue and sends them to their
destination.
When files accumulate in /var/spool/clientmqueue, you probably don't run
the sendmail localhost MTA, and thus the mails don't get send.
Regards
Konrad Heuer
GWDG, Am
sysctl
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
.
For example, you could take a look at rprint in the ports collection. If
you write an input filter which sends data to the printer via rprint you
could inquire the page counter and write its value to the printer queue
log file which in turn could be evaluated later.
Best regards
Konrad Heuer
GWDG
On Tue, 29 Nov 2005, David Miao wrote:
I installed a freebsd 6.0 in vmware 5.5, why I get a mass of error
message of calcu runtime error?
I installed PC-BSD 1.0rc1 which is in turn based on 6.0 within a VMware
GSX server and encountered no problems.
Regards
Konrad Heuer
GWDG, Am Fassberg
to edit file2,
then I press :P, I thought I should go to file1, but I'm still editing
file2.
Try :prev - :p seems to be an abbreviation for a different command.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am
porting BSD-UNIX to the i386 platform, the name FreeBSD
was choosen by the members of the team for the new OS, probably
because it is an open source operating system which can be used
free of charge.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
.
But do not move the whole /etc directory from the root to another
filesystem!
Best regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG / __/__ ___ / _ )/ __/ _ \
Am Fassberg / _// __/ -_) -_) _ |\ \/ // /
37077 Goettingen
system
optimization. Only root's processes are allowed to use this space, and
programs like df or KDE don't include the reserved space in their output
concerning free space. Thus 100% in the output of df are 90% in real.
Regards
Konrad Heuer ([EMAIL PROTECTED]) ___ ___
GWDG
disk1s1a by the partition name of the
root fs on the hard disk) and entering commands like ls and cd you can
try to look at the root fs to see whether there's something wrong.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED
if it is not under screen,
without having to add the above lines to all users ~/.cshrc
I'd check the contents of $TERM within /etc/csh.cshrc by echoing it to
make sure that it is set as expected. Did you?
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED
On Wed, 29 Sep 2004, Ion-Mihai Tetcu wrote:
On Wed, 29 Sep 2004 07:20:17 +0200 (CEST)
Konrad Heuer [EMAIL PROTECTED] wrote:
On Tue, 28 Sep 2004, Ion-Mihai Tetcu wrote:
Could someone explain to me what is the order tcsh's star-up file are
processed ? The man page is rather unclear
someone confirm that I am not the
only person in the world with this problem?
Thanks for your answers,
Uli.
I'd try to switch to polling mode on lpt0 - see man lptcontrol.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED
queue
scheduler. FreeBSD 5.x may use a different scheduler as an alternative
with better behaviour concerning multi-threaded processes, but I don't
know the details.
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED
which fetches pages from the
outside if required from within the local network.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
.
Linux binaries often need to access files outside the emulation directory
tree, just think of data files in the user's homes when running
applications like acroread, linux-mozilla, staroffice etc. So you
absolutely need to break out.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany
but reported as 100% by df.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
will do the
trick to use all of the memory on that box? I thought problems with
large amount of memory =4GB are gone with 5.3-STABLE.
Thanks in advance.
You need to compile a custom kernel with
options PAE
within the kernel config file.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077
modifying rc.conf. No, even worse, it will be senseless
to modify rc.conf with a text editor, since you will have to use some kind
of yast to configure your SuSE FreeBSD.
Sorry for the polemics, I couldn't deny it myself ...
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL
lilo
into the Linux root partition. You may still use it to choose between
booting XP or Linux. If you don't want it, install lilo into the master
boot record.
You XP boot loader code has neither been hurt by FreeBSD nor will it be
hurt by Linux.
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077
independent (not concerning performance, but concerning compatibility.)
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
books are very recommendable. I personally prefer The Complete
FreeBSD written by Greg Lehey because I like his style of writing. It is
didactically ok, and a lot of knowledge grown in years of experience with
operating systems, networking and hardware is looking through.
Konrad Heuer
GWDG, Am
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Are there any chances to see FreeBSD supported by vua.la? Does anybody
know?
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED]
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman
of this message? Or is it
just a joke?
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, kheu...@gwdg.de
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe
anybody see a similar problem?
Thank you very much in advance and best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, kheu...@gwdg.de
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
losses or whatever else ...
So, if anyone has similar or other experiences with NFS locking, I'm very
interested in reading about!
Thank you very much in advance!
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, kheu...@gwdg.de
___
freebsd
:
a) use ssh protocol version 1
b) set UseLogin to yes in sshd_config
c) avoid ssl encryption in communication to ldap server
(ldap://... uri instead of ldaps://... in ldap.conf)
Does anybody see similar problems? Does anybody have an idea what may
couse the problem?
Best regards
Konrad
on the server market. The
number of installations is not the most important figure. Functionality is
important -- ZFS, HAST, CARP, jails, as already mentioned -- would be nice
to see a distributed file system.
So, let's continue as we did for years ..
Best regards
Konrad Heuer
GWDG, Am
Hello,
can I run 64 bit Linux applications on FreeBSD/amd64? Or is Linux
emulation 32 bit only?
Thanks and best regards
Konrad
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, kheu...@gwdg.de
___
freebsd-questions@freebsd.org mailing
and edited voluminous fortran code on a silly
rs232 terminal using ed. So, it is possible, and one can learn basics of
ed in less than a hour. Don't you think so?
Best regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, kheu...@gwdg.de
=8k
82401+0 records in
82401+0 records out
675028992 bytes transferred in 14.670024 secs (46014170 bytes/sec)
What can I do to improve the situation? Any ideas are very welcome. Thanks
in advance!
Regards
Konrad Heuer
GWDG, Am Fassberg, 37077 Goettingen, Germany, [EMAIL PROTECTED
1 - 100 of 138 matches
Mail list logo