aw this problem;
I'm searching for monkeys or intruders ...
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e
El día Monday, February 02, 2009 a las 08:56:39AM -0900, Mel escribió:
> On Sunday 01 February 2009 23:57:40 Matthias Apitz wrote:
> > Hello,
> >
> > I'm alone in my flat and have no cats :-)
> > Last night I powered down my laptop (with the power-off button), the
ached (only wireless).
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.oclc.org/ http://www.UnixArea.de/
b http://gurucubano.b
Hello,
There is a lot of LXDE (http://wiki.lxde.org/en/Main_Page) in the ports,
but no masterport, like it exists for KDE or Gnome;
is anybody working on a master port or has at least some installation
guide worked-out? thanks in advance for sharing it;
matthias
--
Matthias Apitz
ner.
Following a wild guess I did:
# pkg_delete krb5-1.6.3_5
# cd /usr/ports/security/gsasl
# make clean
# make
# make install
which worked fine;
I will file a bug report. Thx for your time and help
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 2
lable for libiconv-1.11_1:
EXTRA_ENCODINGS=on (default) "Include extra character sets"
EXTRA_PATCHES=off (default) "Apply patches to fix CP932 add EUCJP-MS"
===> Use 'make config' to modify these settings
#
Hope this helps you; thx
mat
El día Friday, January 30, 2009 a las 11:23:35AM -0900, Mel escribió:
> On Friday 30 January 2009 06:43:11 Matthias Apitz wrote:
> > Hello,
> >
> > Any idea about the problem below? Thx
> >
> > matthias
> >
> > # cd /usr/ports/security/gsasl
>
ndefined reference to `initialize_error_table_r'
*** Error code 1
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.oclc.org/ http://www.UnixAr
.cgi?pr=130891
Thanks for pointing me to this PR; it was my fault not having searched
enough; will do so next time;
it seems that in the above PR is a proposal for a fix, but not approved;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhachin
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.oclc.org/ http://www.UnixArea.de/
b http://gurucubano.blogspot.com/
SPAMer of the year: Subject
El día Saturday, January 24, 2009 a las 03:25:25PM +0100, Matthias Apitz
escribió:
> El día Saturday, January 24, 2009 a las 10:13:32AM -0200, Sergio de Almeida
> Lenzi escribió:
>
> > Hello...
> >
> >
> > It is because the installation (the makefile is wron
El día Tuesday, January 27, 2009 a las 02:59:24PM +0100, Anton Berezin escribió:
> Matthias,
>
> On Tue, Jan 27, 2009 at 02:15:00PM +0100, Matthias Apitz wrote:
>
> > After installing 7.1R ports (portupgraded) I'm trying to create packages
> > of all the ~1000 i
nnot stat: No
such file or directory
tar: Removing leading '/' from member names
tar: Error exit delayed from previous errors.
pkg_create: make_dist: tar command failed with code 256
bsdpan-libwww-perl-5.823: ... tar: Removing leading '/' from member names
bsdpan-XML-Parser-2.3
d a bit with your
shell script but I have seen two identicals ones in the port:
work/DEV300_m38/desktop/scripts/soffice.sh
work/DEV300_m38/desktop/unxfbsdi.pro/misc/soffice.sh
and I will test it.
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g -
El día Saturday, January 24, 2009 a las 07:16:35AM +0100, Matthias Apitz
escribió:
> Hello,
>
> I've compiled and installed the port editors/openoffice.org-3-devel
> (version openoffice.org-3.1.20081224) without, but OpenOffice does not
> start:
>
> $ openoffice.or
#x27;No such file or
directory'
8551: access("/usr/local/lib/qt4/libuno_sal.so.3",0) ERR#2 'No such file or
directory'
8551: access("/lib/libuno_sal.so.3",0) ERR#2 'No such file or
directory'
8551: access("/usr/lib/libuno_sal.so.3&quo
etter
HTTP-proxy-like tool in the /usr/ports which prints the HTTP in better human
readable form... any ideas? thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e
e/installEeePC.txt
Adopt the procedure to your needs.
HIH
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e - w http://www.oclc.org/ http://www.U
he factory)
> and let sysinstall put slice and partitions onto it.
The problem is that 'from the factory' sometimnes they come already Windows-like
formated; I've wiped out all with:
# dd if=/dev/zero of=/dev/da0 bs=1m
(double check that /dev/da0 is really the device you want to
ll supported
in FreeBSD 7.0 as well?
Thx
matthias
--
Matthias Apitz
SPAMer of the year: Subject: Alle Software ist Deutsche Sprachen
>From: -40 % die Neujahrsaktion
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailma
iction. In my first science
column for F&SF, I can't resist the urge to contribute a bit to
this grand tradition.
A science-fiction writer in 1991 has a profound advantage over
the genre's pioneers. Nowadays, space-exploration has a past as
well as a future. "The conque
nnect to the
remote host; will check the sources for this bug/feature...
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://w
vi
> .
in sh or bash:
$ LANG=es_ES.UTF-8 export LANG
$ vim yourFileHere
HIH
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROT
27;t know if this is the last information. I have an eeePC 900 and not
the 1000. Write to the autors of the page, maybe they know if someone is
already working on it. In any case you could install from an USB key as
described here http://www.unixarea.de/installEeePC.txt
and Wifi will work, I thin
eebsd-current
Known issues and FreeBSD work for the eeePC series are described here:
http://wiki.freebsd.org/AsusEee
HIH
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4
rom the ports KDE 4.1.0 and it
was to unstable for daily usage, at least at this time;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]>
, a correct LANG environment,
for example LANG=es_ES.UTF-8, and the editor 'vim' (from the
ports); to enter UTF-8 chars which are not on your keyboard you could
use, for example, KDE's application KCharSelect
HIH
matthias
--
Matthias Apitz
Manager Technical Support - OCLC G
El día Thursday, October 30, 2008 a las 07:51:05PM +0100, Fabian Keil escribió:
> Matthias Apitz <[EMAIL PROTECTED]> wrote:
>
> > Is anybody aware of a port of tangoGPS
> > http://www.tangogps.org/gps/cat/About to FreeBSD 7.0? It runs it in my
> > Linux based cellph
display). What kind of USB based GPS devices could be used in this
eeePC with FreeBSD 7.0?
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]&g
ail 6 times (at least) to the mailing-list; I've
checked the Message-ID lines, all are diffrent:
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
<[EMAIL PROTECTED]>
...
please stop that; thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC Gm
ions for
> doing screen Capturing ..
>
> It will be useful for demo presentations alot..
>
> Thanks in advance
> Dhanesh
check this:
http://groups.google.com/group/lucky.freebsd.questions/msg/51c4bec19542621f?dmode=source
hih
matthias
--
Matthias Apitz
Manager Technic
in 7 kernel that breaks
> growisofs
> when trying to use multisession.
>
> Any ideas when/if this will be fixed?
I have now filed a bug report as:
http://www.freebsd.org/cgi/query-pr.cgi?pr=127316
(wait some hours before it will show up)
matthias
--
Matthias Apitz
Manager
UAWEI to data connection but
> still failed to send sms using smstool. Please help..TQ[/quote]
Some weeks ago Vodafone provided me with a test item (but they asked me
to return it) and it worked without problems; details here:
http://www.unixarea.de/installEeePC.txt
in chapter 7;
matt
.3_4' and have a look into
the resulting tar file foo-1.2.3_4.tbz; this will give you an idea of
what you must provide on the command line for building a package from
certain files; this is what I would start with;
hih
matthias
--
Matthias Apitz
Manager Technical Support - OCL
e second part I have no idea, somehow I need to watch the mbox
> file of say a e-mail account called "test"
>
> And IF a mail arrives parse it look for a security key if exists convert to
> txt file and copy to shared dir.
procmail (which is in the ports) will let you do t
CP/IP Illustrated, Volume I, of Rich Stevens;
S is Syn
P is Push
F is Finish
but there are fare more things to know and to read and understand
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-6
as well without any issues;
the installation was done in both cases follwing this guide:
http://www.unixarea.de/installEeePC.txt
don't know if this will help you;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-
El día Wednesday, August 27, 2008 a las 01:00:18PM +0200, Matthias Apitz
escribió:
> the DUMP itself seems to be ok because a restore like this works:
>
> $ ssh [EMAIL PROTECTED] 'cat dumpsRebelion-20080825/usr.dmp.gz' | gzip -dc |
> restore -xv -f - ./home/guru/myThi
El día Wednesday, August 27, 2008 a las 11:20:22AM +0200, Matthias Apitz
escribió:
> without '-P' in this case, I think, and:
>
> # dump -0auL /usr | gzip -c | ssh [EMAIL PROTECTED] 'cat
> dumpsRebelion/usr.dmp.gz'
>
> should of course give more or less
dmp.gz'
should of course give more or less the same;
> >
> >the DUMP ended fine with no errors; today I try to reload certain
> >directory with:
> >
> >$ restore -xv -P "ssh [EMAIL PROTECTED] 'gzip -dc dumpsRebelion/usr.dmp.gz'"
> >./home/gur
tapes that
have no further files to extract. Otherwise, begin with volume 1.
Specify next volume #: 1
partial block read: 16128 should be 16384
partial block read: 256 should be 16384
partial block read: 16128 should be 16384
unknown tape header type 6697331
abort? [yn]
what does this mean? any hint? thanks
p, mounted the CD1 and built the USB key.
I'm asking me (and all) how this could be done having only the FreeBSD
7.0 CDs and no running FreeBSD 7.0 system?
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-8
the man pages before):
# portsnap fetch
# portsnap extract
# portupgrade --batch -a
The 3rd is a long run, depends on what you have installed; but after
this
# cd /usr/ports/x11/kde4
# make install clean BATCH=yes
runs fine
matthias
--
Matthias Apitz
Manager Technical Support - O
e te interese.
Please contact me off-list if you're interested;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.ocl
xample.com
Despite of the magic awk(1) or while-loops: this is all UUOC Award;
http://en.wikipedia.org/wiki/Cat_(Unix)#Useless_use_of_cat
:-)
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-6
uestion is: where is this installation date stored?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http:
: Be aware that depending on the local laws you might (will) be
responsible if the NATed IP is used in criminal affairs (downloads,
child porno, etc.); at least the local authorities will ask you who used
that IP and take your complete system with them for further
investigations, scanning your
he sesion, letting it doing some commands.
>
> I installed from ports, but I dont remember its name. ;-)
>
> Can anyone help me?
¿Será que hablas de /usr/ports/sysutils/screen?
Could it be /usr/ports/sysutils/screen?
Saludos
matthias
--
Matthias Apitz
Manager Technical Suppor
attempted
Jul 11 13:45:30 rebelion kernel: acd0: setting up DMA failed
and the only way to get the system back to a usable state was rebooting
it;
this is with FreeBSD-7.0R; what I have done wrong?
thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg
sing in your ~/.xinitrc above; try this:
make a file xmodmap.sh with
#!/bin/sh
DISPLAY=:0.0 export DISPLAY
sleep 10
xclock
put into your ~/.xinitrc the lines:
sh ~/xmodmap.sh &
exec fvwm
(don't miss the '&' sign!) and watch if the xclock comes up after fvwm is up;
m the Athos driver.
>
> Any Idea's
See:
http://wiki.freebsd.org/AsusEee
and my installation guide
http://www.unixarea.de/installEeePC.txt
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61
the xmodmap commands;
if you use KDE as desktop, like I do, it is more simple to just put your
script into the ~/.kde/Autostart/ directory;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89
offer any solutions. Any
> advice?
If I not rember it wrong, the printer must be attached at boot time fro
the configuration with CUPS; check as well for /dev/lpt0 after boot,
i.e. try to access it for example with 'date > /dev/lpt0'
matthias
--
Matthias Apitz
Manager Techni
cipe:
http://groups.google.com/group/lucky.freebsd.questions/msg/5c759b1c87376b22
but this is not exactly a copy of the installation disk1;
is there any guide to do this? thanks in advance;
matthias
--
Matthias Apitz
e <[EMAIL PROTECTED]> - w http://www.UnixArea.de/
thing about Red Hat or Debian, but how about
$ pkg_info -L stardict-2.4.8_5
or even
$ man pkg_info
HIH
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-452
El día Tuesday, May 27, 2008 a las 04:16:44PM +0200, Matthias Apitz escribió:
> El día Friday, May 23, 2008 a las 01:18:06PM +0300, Manolis Kiagias escribió:
>
> > Yes, I am already planning to upgrade :)
> > At this time, it is not available in Greece (though I have spotted
orking fine now.
> - Hide quoted text -
The page says KDE 3.5.8 because this is what I have; I'm sure it will
work with any other recent KDE or Gnome version; I'm happy to update the
page with your (or others) version of KDE/Gnome/... just send me a note;
matthias
--
Ma
resolve it. Could somebody please help?
Hi Girish,
I can't comment on the error, but you could compile directly from the
sources out of SVN and even a more recent version:
http://wiki.ekiga.org/index.php/Compile_your_own_SVN_version_of_Ekiga_on_FreeBSD
HIH
matthias
--
Matthias
is on the SSD and
> FreeBSD on an 8GB SDHC.
In this Wiki page they show already a model 900 with up to 20 GByte SSD;
maybe it's a good idea to go for this model, even if it is a bit more
expensive (~400 euros):
http://en.wikipedia.org/wiki/Eeepc
matthias
--
Matthias Apitz
install the sources
before because I have only installed kernel sources); will let you know;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]>
on
from now;
thx for the hint anyway; its now clear that I will go this way (and buy
the beast :-))
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-
e with 4 or 8 GByte SSD it is not an
option to compile the stuff up from /usr/ports on the system itself, not
only from the point of view of disk space, but also because of the limited
lifetime write cycles of the SSD;
in short: what would be the easiest way to move the installed ports from
my lapto
0x0471 product 0x0329, rev
1.10/0.03, addr 2
May 20 09:32:17 rebelion kernel: pwc0: Philips SPC900NC USB webcam
May 20 09:32:17 rebelion kernel: pwc0: This camera is equipped with a Sony CCD
sensor + TDA8787 (32)
Hope it helps
matthias
--
Matthias Apitz
Manager Technical Support - OCLC
nt" part.
You could use and configure the amd(8) for this; it will mount the
device (when it is plug'ed in) on 'cd ~backup/data' or any other access,
and will umount it when not busy after some time;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
thx in advance
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://www.oclc.org/ http://www.UnixArea.de/
b http://gurucubano.blogspo
devel/glib20 removed the pkg and installed it as fresh as
2.16.x; this helped; don't know (and understand) how the older glib20
came to the system, maybe as part of the basis system; on next fresh
install I will have a closer look what gets installed with the OS;
hope it helps you
/usr/lib/vmware/lib
/usr/lib/vmware/bin/vmware /usr/lib/vmware/libconf
and it could be that one could it make happy on FreeBSD too;
has someone tried this out? or is there some other way to get this
console running on BSD? thx in advance
matthias
--
Matthias Apitz
Manager Technical Su
Thank you very much!
Look into the output of 'dmesg' of the Ubuntu to see what kind of
controller you have in that box and how the disk is seen by Ubuntu;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-
El día Wednesday, April 09, 2008 a las 05:12:05PM +0200, Kris Kennaway escribió:
> Ivan Voras wrote:
> >Matthias Apitz wrote:
> >>Hello,
> >>
> >>I'm used to use 'freemind' (and used 0.8.0 a lot in FreeBSD 6.2); since
> >>the updat
ive java and all its dependencies from ports.
>
ok, I will try to build /usr/ports/java/jdk15
thx for the tip
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[
El día Wednesday, April 09, 2008 a las 02:48:18PM +0200, Ivan Voras escribió:
> Matthias Apitz wrote:
> > Hello,
> >
> > I'm used to use 'freemind' (and used 0.8.0 a lot in FreeBSD 6.2); since
> > the update to 7.0-REL and freemind as 0.8.1 from p
27;m working in some
other part of the KDE 3.5.8 desktop; does someone face the same problem?
thanks in advance for a tip;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-1
is was possible after portsnap
fetch/extract on a real new system, just installed from boot CD;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w
s/openoffice.org-2.0 showed the mentioned problem (CPU
loop on open document);
HIH
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w
/bin/autoconf-2.61
which does not read /usr/local/share/aclocal/pkg.m4 as I've proofed
with 'ls -lu /usr/local/share/aclocal/pkg.m4'
that's why PKG_CHECK_MODULES is not expanded by autoconf and the result
is an error in running configure;
any ideas?
matthias
--
Matthia
here:
http://wiki.ekiga.org/index.php/Compile_your_own_SVN_version_of_Ekiga_on_FreeBSD
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> - w http://ww
ng them up at boot with RSA auth) and tunnel in them reverse the SSH
port, check the -R flag of ssh(1).
You can also setup OpenVPN as client on the remotes and server on the
your side.
mattihas
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching
El día Wednesday, March 26, 2008 a las 01:47:01PM +, Alphons Fonz van
Werven escribió:
> Matthias Apitz wrote:
>
> >the main difference between home and work is: WEP at home and WPA2 at
> >work;
>
> Which WiFi board are you using? Several drivers are known to cau
e than a year on 6.2-REL and without any panic which
was not caused by pulling out the PCMCIA UMTS card; so I think it is not
a hardware issue;
Any comments?
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308
El día Monday, March 24, 2008 a las 05:49:49PM +0100, Matthias Apitz escribió:
>
> Hello,
>
> I want to port some application (Ekiga) directly from their SVN to
> FreeBSD 7.0R which is using
>
> $ ./autogen.sh --with-pwlib-dir=/usr/local
>
> to generate th
ing somewhere?
Hello Gilles,
What will it give you with:
$ LANG=es_ES.ISO8859-1 vi
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]> -
r GNU automake
gnome-common-2.20.0 Common automake macros for GNOME and GNOME 2
Could someone pls give me an idea how to solve this? Thx in advance
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f
which is able
to detect nearly all hardware used to assemble the laptop. Then take the
/var/log/messages output of this and check it against the FreeBSD
hardware notes.
matthias (running FreeBSD 7.0-R on laptop :-))
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg
iso-8859-1"!
I've digged into this and could make it work again by launching Samba in
an UTF8 environment, for example with:
# LANG=en_US.UTF-8 /usr/local/etc/rc.d/samba start
(or setting LANG=en_US.UTF-8 in the start script). Any comments on this?
Thanks in advance
matthias
-
El día Saturday, March 15, 2008 a las 11:43:04PM -0800, Ted Mittelstaedt
escribió:
...
> Java is write-once, run anywhere. As long as they run under the
> JDK that has been ported to FreeBSD then there's no problems.
>
> I know this is so because Sun Microsystems says so in their
> lite
gz ...
> >>> extracting Font.tar.bz2 ...
> ===> Patching for ghostscript-gpl-8.61_3
> ===> Applying FreeBSD patches for ghostscript-gpl-8.61_3
> File to patch:
>
> -
>
> _
El día Thursday, March 06, 2008 a las 02:36:05PM +0100, Matthias Apitz escribió:
> I got the kde3 port installed fine after only updating the cups-base
> port to cups-base-1.3.6 (as I wrote yesterday). Now I followed your hint,
> removed all the system again (it's only a test machi
El día Thursday, March 06, 2008 a las 02:36:05PM +0100, Matthias Apitz escribió:
> El día Thursday, March 06, 2008 a las 01:20:54PM +, Robin Becker escribió:
>
> > Matthias Apitz wrote:
> > >El día Wednesday, March 05, 2008 a las 04:02:11PM +, Robin Becker
> >
El día Thursday, March 06, 2008 a las 01:20:54PM +, Robin Becker escribió:
> Matthias Apitz wrote:
> >El día Wednesday, March 05, 2008 a las 04:02:11PM +, Robin Becker
> >escribió:
> >
> >>I'm trying to build kde3 from ports with 7.0 release and get thi
rej
> => Patch patch-CVE-2007-4351 failed to apply cleanly.
> *** Error code 1
>
> Stop in /usr/ports/print/cups-base.
> *** Error code 1
...
I run into the same problem and fetched the tar file of the
cups-base-1.3.6 port from FreeBSD which compiles fine;
matth
El día Saturday, March 01, 2008 a las 02:52:41PM +0100, Matthias Apitz escribió:
>
> Hello,
>
> I'm installing 7.0R on a Fujitsu Siemens Lifebook C series
> X11 comes up but the box panic's on first console switch or
> on exit of X (fully reproduceable, also with
to
apply cleanly.
=> Patch(es) patch-Double.cpp patch-browser_app_mozilla.in
patch-build_unix_run-mozilla.sh patch-config-mkdepend-imakemdep.h
patch-config-rules.mk patch-config_autoconf.mk.in
patch-config_mkdepend_Makefile.in patch-configure applied cleanly.
*** Error code 1
Any h
www.unixarea.de/Xorg.0.log
http://www.unixarea.de/xorg.conf
Any hints? Thanks in advance
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PR
linux/npviewer.bin
Is it worth to file a bug report or just remove it by cron job?
Thx
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
t +49-89-61308 351 - f +49-89-61308 399 - m +49-170-4527211
e <[EMAIL PROTECTED]&g
El día Friday, February 15, 2008 a las 11:12:30AM +0100, Matthias Apitz
escribió:
> my multimedia/p5-FLV-Info is 0.15, will update asap; but more me
> worries that the file is not playing; it was only nice to have to
> put the files into some HTML page (as embedded SWF), but more impor
El día Thursday, February 14, 2008 a las 03:27:28PM -0600, Mark Kane escribió:
> On Thu, Feb 14, 2008, at 13:34:03 +0100, Matthias Apitz wrote:
> > The resulting *.flv files play fine with mplayer. I wanted to
> > convert them to *.swf file and stumbled over the port
> > m
El día Thursday, February 14, 2008 a las 09:22:21AM +0100, Matthias Apitz
escribió:
> Thx for your hint. I've had to fetch the port by hand because
> it's not in 6.2R and as well the urlgrabber www/py-urlgrabber;
>
> but now it's working as I wanted; thx again;
The
our hint. I've had to fetch the port by hand because
it's not in 6.2R and as well the urlgrabber www/py-urlgrabber;
but now it's working as I wanted; thx again;
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
Gruenwalder Weg 28g - 82041 Oberhaching - Germany
El día Wednesday, February 13, 2008 a las 03:43:35PM +, Vince Hoffman
escribió:
> Matthias Apitz wrote:
> > Hello,
> >
> > Is there any command line tool in FreeBSD for downloading a video from a
> > URL like http://video.google.com/googleplayer.swf?docId=7540047
Hello,
Is there any command line tool in FreeBSD for downloading a video from a
URL like http://video.google.com/googleplayer.swf?docId=7540047147367608928
in the way youtube-dl, for example, does? Thx in advance
matthias
--
Matthias Apitz
Manager Technical Support - OCLC GmbH
401 - 500 of 568 matches
Mail list logo