boot up and shutdown seem alot quicker than linux
arden
Yes. I appreciate FreeBSD's short boot times, especially after I have
done a cvsup make {build,install}{world,kernel}.
- Mike
___
[EMAIL PROTECTED] mailing list
I did get single user up, but I have limited commands and it won't
allow me to adduser.??
Do this again. When you get the shell prompt immediately issue the
command :
mount -a -t ufs
The /usr and other partitions are not likely to be mounted in single
user mode. adduser is in /usr/sbin/
Can someone shed light on the following error?
May 13 09:08:47 rr-spamd-0 ntpd[607]: ntpd 4.1.1b-a Wed May 12 13:55:12 PDT 2004 (1)
May 13 09:08:47 rr-spamd-0 ntpd[607]: bind() fd 5, family 2, port 123, addr
130.107.1.31
, in_classd=0 flags=1 fails: Can't assign requested address
rr-spamd-0#
I'm using 4.7p1 here, and I've had all sorts of fun on occasion with
traceroute and my various firewall/routers. The default traceroute will
not work since UDP traffic is apparently blocked on the return. Opening up
port ranges on my router just doesn't seem right. However, Linux
I just got a Brother printer with a built in print server.
Im trying to set it up to work in my DHCP updating DNS scheme.
Using the printer's default name, Im always getting this DNS error -
May 12 15:42:07 hivemind named[84]: owner name BRN_448719.trini0.org IN
(primary) is invalid -
Is there a Sparc64 (Ultra5) specific install instructions document?
ta,
Mike
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
Im giving up for now.
Tried to build mozilla with -
make -DWITHOUT_MAILNEWS=yes -DWITHOUT_LDAP=yes -DWITHOUT_CHATZILLA=yes instal
l
and it still has the mail and chatzilla modules installed.
Maybe Ill experiment with it later (like when Im sleeping)
If you are disabling all of that why
How can I copy a group of files to a different name. I want to copy all
files starting with 'bacula*' to 'bacula*.old'. So I have these four files:
blacklamb# ll bac*
-r--r--r-- 1 root wheel 949 Apr 22 09:13 bacula-barcodes
-rw-r- 1 root wheel 5792 May 17 16:52
I have dynamic IP address and ISP blocks inbound port 25 so any
recipients email server that checks back before accepting says I an
invalid sender. Going through my ISP email server should fix this.
How do I tell sendmail to send, relay my outgoing email through
my ISP email server?
1) go
I am about to begin the process of building a replacement mail server
for our workgroup using FreeBSD and Sendmail.
In addition to receiving mail from our primary MX and sending mail out
our SMART_HOST, I would like the ability to enable our users to send and
receive email directly from this
Wondering if you could copy the ports base of a FreeBSD server to a CD, then
copy the CD to another FreeBSD server of the same version.
I searched through many docs on CVSUP, but didn't find the answer to this
question. I simply want to streamline the constant building and rebuilding
of
When I try and run linux-opera, i get this error.
[EMAIL PROTECTED] rehash
[EMAIL PROTECTED] linux-opera
ELF binary type 0 not known.
ELF binary type 0 not known.
/usr/X11R6/share/linux-opera/bin/opera: 1: Syntax error: ( unexpected
what does that mean? What should I do?
Try doing
I have enabled the skey one time passwords login feature to allow telnet
access to a machine. Is there a way to require the skey login for telnet
but not for ssh?
telnet -K ins
Trying 130.107.1.41...
Connected to ins.csl.sri.com.
Escape character is '^]'.
FreeBSD/i386 (ins) (ttyp1)
login:
first, why does 59375408 + 1348433 != 61337213
df -k /home/henninb
Filesystemkbytesused avail capacity Mounted on
61337213 59375408 134843398%/home/henninb
I believe your disk has 1% reserved space. See newfs(8)
-m free space %
Does anyone know if it's possible to convert an ext3 partition to an
ffs partition? And if so, is it possible to do it without data loss?
dump(8) and restore(8)* may do the trick. I would recommend dumping from
an os where ext3 is native (e.g. linux) and then restore on a os where ffs
is
I have a machine that has been running 4.8-RELEASE for months flawlessly.
I recently CVSup'd to RELENG_4_8 (now running 4.8-RELEASE-p8).
The machine is losing routes. Specifically its default route and a route
to the lan of one of its own interfaces. I can manually add the default
route back,
(and not 4.8-RELEASE
as I indicated below). Is it possible to blow away /usr/src and cvsup to
4.8-RELEASE-p3 rather than 4.8-RELEASE-p8?
Thanks!
- Michael Hogsett
At 02:11 PM 24/09/2003, Mike Hogsett wrote:
I have a machine that has been running 4.8-RELEASE for months flawlessly.
I
*
- Michael Hogsett
At 02:11 PM 24/09/2003, Mike Hogsett wrote:
I have a machine that has been running 4.8-RELEASE for months flawlessly.
I recently CVSup'd to RELENG_4_8 (now running 4.8-RELEASE-p8).
The machine is losing routes. Specifically its default route and a route
I think that WinXP more popular and more easy than FreeBSD.
You need to define easy.
From a GUI perspective, Yes many people will find Windows XP easy. This
is often attributable to the fact that many of these people have been
using Windows since atleast the Windows95 days. For these
I have been pulling my hair out over this. I installed a package several
days ago that required gettext. The gettext in ports has been updated so
I had to deinstall the existing on and install the version from ports.
After that mozilla and mozilla-devel (and some other stuff) wont run
becuase
I am curious as to what people using FreeBSD use for a Backup Solution. Are
there any Comercial software available for Tape Backup Solutions that run wel
l on FreeBSD?
I'm looking at using a Dell PowerVault 110T LTO tape drive and was looking fo
r software to utilize to backup the 10
36gigs (and growing) of
people's images, documents, etc on it (samba server). My single tape drive
is only 20 gigs. I am assuming this will be a problem for Amanda unless I
get a bigger tape drive.
Sincerely,
Rick Duvall
- Original Message -
From: Mike Hogsett [EMAIL PROTECTED
Read find(1). find is your friend.
- Mike
I have a need for a script that removes tripwire reports that are over 30 day
s
old. my /var fills up quickly from them. aany clue on how to write this?
- Noah
___
[EMAIL PROTECTED]
Anyone know whether it'd be possible to cleanly disable printing the
kernel boot messages (the bold white text)? Meaning, short of
commenting out the code that prints this, is there any way?
If you dont mind **NOT** having a console **AT ALL** you can comment out
the system console device
Can anyone recommend a well supported Serial ATA RAID card for FreeBSD?
I would like a mirrored drive with one hot spare.
Thanks
- Michael Hogsett
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
If the full-duplex might be related, how would I set it to half-duplex?
If they both live on a switch then full duplex is likely preferable. If
they both live on a hub half duplex what you want. Make sure both ends
are at the same duplex setting. To manually set the 10/100 half/full
duplex
No reason not to if you want to. But, you don't need to if you're
willing to put up with XP being labeled as '???' in the OS selection
menu which the regular FreeBSd boot manager will give you.
I also thought the `???' mean Why the fsck would you want to run that!
:)
To Unsubscribe:
[buzby] [hogsett] [~]
; uname -a
FreeBSD buzby 4.4-RELEASE FreeBSD 4.4-RELEASE #3: Thu Sep 20 13:16:52 PDT 2001
root@buzby:/usr/src/sys/compile/PRI-NIS i386
[buzby] [hogsett] [~]
; uptime
4:22PM up 415 days, 7:17, 1 user, load averages: 0.08, 0.02, 0.01
[buzby] [hogsett] [~]
;
To
portmap is also required for NIS.
- Mike
From: Adam Stroud [EMAIL PROTECTED]
Since NIS uses RPC,
do I need to configure inetd.conf to allow RPC on the NIS server and
clients?
The handbook does not make any mention of editing the inetd.conf file.
inetd doesn't handle RPC.
Use the
I haven't seen FBSD 4.7 system with uptime 1000 days, for quite
obvious reasons.. Should I recommend everyone to install FBSD 2.2.8
since it has good uptime records? :)
Sorry to step into the middle of a thread here, but to me it says that
FreeBSD has had, and likely continues to have, a
For a reason that I have no ability to change I have a customer who needs
to install 4.2. Can I check out RELENG_4_2 from cvsup and get the desired
results? - or - Are 4.2 Install ISO available somewhere (not
ftp.freebsd.org).
TIA,
- Mike
To Unsubscribe: send mail to [EMAIL PROTECTED]
Sorry after re-reading my reply one thing I did not make clear
Install freebsd as you would with a uniprocessor machine, then boot that
install and do what I recommend below
- Mike
You need to recompile the kernel with the SMP options turned on, install
the kernel and reboot. On a
Greetings,
Has anyone used a Dell PowerVault 122T tape loader with FreeBSD.
Specifically I am interested on how well the tape changing works.
- Mike
P.S. I would like to use the 122T with the LTO tapes, and Amanda to do
our backups. I use two Sony AIT SDX-400C drives now. I have been
Hey,
Hi.
I'm getting ready to setup a NIS server for a LAN, and I'd really like
to use FreeBSD again. However, the last time I did this with FreeBSD
(4.6, so not that long ago), I couldn't get the server to build a map
for the home dirs. I tried an awk script in the Makefile that I saw
Shawn Said:
I am currently tryin to learn sysadmin. is there a place were there
are projects that I can practice on my box..I have just been searching
the web for stuff to do with my box and have learned bits and
pieces..but I want a little more structure. I have bought a few books
mount -t msdos /dev/da0 /mnt
msdos: /dev/da0: Invalid argument
Why does this keep happening?? What am I doing wrong?
In the past I found that the zip disks had some odd partitioning. I often
found the primary partition to be the 4th partition on the disk (the first
three being
(after killing off
the backups).
Nothing is mentioned in /var/log/messages. The switch claims the port is
running at 100Mbits, full-duplex, as does the output of
ifconfig. Suggestions?
- Mike Hogsett
___
[EMAIL PROTECTED] mailing list
http
i wanted to change the shell for user root to bash.
in the freebsd online handbook i found this command:
# echo /usr/local/bin/bash /etc/shells
but what i didnt know at this moment, that i have to install bash
before.
so i logged of as user root and get now on login the
I would like to be able to set certain sysctl variables in the kernel,
preferably BEFORE the kernel finishes booting and runs init, etc. (or at
the worst case, very shortly after init runs) I thought I remembered
that there was a way to do this through the boot loader. Can anyone
enlighten
i got a DoS attack, how i can stop it ?
note:
i have a lan network in my home, and DSL connection which is connected
to the
hub direct, and i have 3 pc's.
thanks
I use a firewall which allows a block of DoS IPs from any to any also
can close ports easily. Plus, if you
Try (as root):
# XFree86 -configure
That *should* write a configuration file into root's home directory.
Then run :
# XFree86 -xf86config /path/to/the/new/config
If it works you can tweak it from there (e.g. bit depth, screen
resolution, refresh frequency, etc.).
If not... um... your
You can use /etc/ttys for this (despite the name).
Oh my! How clever. That had never occurred to me. I chose the crontab
entry method to keep the daemon half of SpamAssassin running. This is
more elegant.
___
[EMAIL PROTECTED] mailing list
from an sh type shell
for i in *.inc
do
z=`echo $i | sed -e s/inc/htm/g`
mv ${i} ${z}
done
This won't give expected results for a file named fooinc.inc. It will
become foohtm.htm. I realize that based on the file names given in the
original email this doesn't appear to be an issue, but
What mean BSD in FreeBSD name?
Berkeley Software Distribution. This was a distribution of a modified ATT
Unix that came out of University of California at Berkeley in the mid to
late 1970s.
For a family tree that will show how BSD is related to ATT Unix see :
http://www.levenez.com/unix/
-
and yppasswd to play nice?
If I run yppasswd on my FreeBSD NIS client my password entry in our
password file on the NIS master ends up with an MD5 password so I can no
longer log into my Solaris NIS client.
- Mike Hogsett
___
[EMAIL PROTECTED
How do I configure FreeBSD to use DES? Specifically if I run a FreeBSD
NIS master how do I get rpc.yppasswdd and yppasswd to play nice?
Look in /etc/login.conf:
default:\
:passwd_format=des:\
Look in /etc/auth.conf:
crypt_default = des
Hmmm.
Not deprecated, but streamlined. If I understand you correctly, in
/etc/mail, copy freebsd.mc to your.machine.name.mc, then do your editing on
it.
Don't even copy it. Just run make, then edit hostname.mc and run make
(again), make install and make restart.
To Unsubscribe: send mail to
I get these errors generated on a machine which has the correct
netmask, no static routes, no incorrect routes of any kind.
During a migration there are multiple IP networks on the same physical
switched network, if I connect to one of the machines in the other
network on the same wire,
/ can be 128M if you have separate /var and /tmp directories...
Here is my local box :
; df -lh
Filesystem Size Used Avail Capacity Mounted on
/dev/ad0a126M63M53M54%/
/dev/ad0f252M70M 162M30%/tmp
/dev/ad0g 17G 5.0G11G31%/usr
Please anyone correct me if I am wrong, but I believe that when you are
using dd with a raw disk blocksize only effects performance and does not
have any effect on the duplicated data.
Hi !
Thank you all for your prompt replies. You have said in your
replies that the bs parameter
man killall
Can anyone tell me how i can kill an application
process through a piece of C code?
i have the realplayer application,which has to be
closed manually with a mouse or using ctrl-C or
using kill pid.
But how can i kill it through a piece of code?
one way is to execute ps
In a switched network unicast packets from host A on port 1 to host b on
port 2 will never be seen by host C on port 3 (whether it is a trunk or
not). That is the whole point of a switch. Broadcast packets are always
sent to all ports in in the VLAN (including trunks).
Greetings.
My goal
of a paper back book).
- Mike Hogsett
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I split the drive in two with the intentions of installing FreeBSD on
one slice, and Linux on the other (I haven't tried Linux yet). Are you
suggesting that I should try putting / on a small slice by itself, and
see if that boots? It's worth a shot.
I would suggest that you make a 256Mb
We user SpamAssassin here. It works wonders.
www.SpamAssassin.org its also in the ports /usr/ports/mail/p5-Mail-SpamAssassin
Can someone on the list PLEASE recommend a good quarantining filter app?
I know mwm (Mike Someone) out there uses one that issues a challenge via
reply or reply to
perhaps you should change the quotes to backquotes and add some spaces
find . -size +`expr 10 \* 1024 \* 2` -print
my machine have 40GB HD, only run a simple web site on
apache with a samll mysql database, but last 2 week
35GB hard dirve space have been use, I don't even know
I have a PIX 515 logging to a 4.6.1-RELEASE-p10 box.
On the FreeBSD end :
in /etc/rc.conf
syslogd_flags=-c -c
in /etc/syslog.conf
local4.*/var/log/equip/pix.log
sysctl net.inet.udp.log_in_vain
net.inet.udp.log_in_vain: 0
On the PIX 515 :
logging
486/66.
I guess I got an answer to another question, which I didn't ask. There
really are many people keeping old (ancient) hardware alive with a little
demon.
- Mike Hogsett
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I just wanted to send a note of thanks to both the FreeBSD developers and
the FreeBSD user community.
Last night I used the nfs mounted /usr/src /usr/obj capability to build
4.7-RC on my dual 1Ghz PIII and installed it on my wimpy AMD-K6 300 this
morning. It worked flawlessly. The
Just another data point for you all.
CVSup'd this morning
{build,install} {world,kernel}
All is well.
Good job folks!
- Michael Hogsett
FreeBSD axp.csl.sri.com 4.7-RELEASE FreeBSD 4.7-RELEASE #3: Thu Oct 10 14:58:35 PDT
2002 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/AXP alpha
syncing
] [/usr/ports/www/netscape7]
-- cd /usr/ports/www/mozilla
[axp] [hogsett] [/usr/ports/www/mozilla]
-- make
=== mozilla-1.0.1_1,2 is marked as broken: core dumps on alpha during post-build.
[axp] [hogsett] [/usr/ports/www/mozilla]
-- argh
bash: argh: command not found
Suggestions?
- Mike Hogsett
.
- Mike Hogsett
I have a pool of bsd computers, connected together via an ethernet switch.
I like to monitor the traffic that is exchanged between all the computers,
and capture and display them on a console computer. Since I'm using a
switch, I will not be able to see the traffic and also
I would recommend a cvsup, build world, build kernel, etc. upgrade to
4.7-RELEASE personnally. Doing the upgrade this way will keep downtime to
a minumum ( perhaps 10 minutes downtime ).
- Mike
I'm currently running 4.5, and want to upgrade my machine and was
wondering what you might have
Seems to mean that they are hung off of one of Yahoo!'s routers in
Exodus's Santa Clara colo site. (which is absolutely gorgeous btw).
Why doesn't postmaster put a procmail filter infront of the
list software to prevent this abuse?
traceroute...
19 g2-1.bas2-m.sc5.yahoo.com
Why doesn't postmaster put a procmail filter infront of the
list software to prevent this abuse?
me either, curious.
I think these are related to some pumice-brained children's
attempts to sign the list up to these other lists. Then someone
has to send a thing in to unsubscribe
'uname -a' will give you the information..
e.g.
-- uname -a
FreeBSD axp.csl.sri.com 4.7-RELEASE FreeBSD 4.7-RELEASE #3: Thu Oct 10 14:58:35 PDT
2002 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/AXP alpha
I am running 4.7-RELEASE
- Mike
Hi fellows , How can I tell what kind of FReeBSD
.
Now cd /usr/src
make installworld
Now run mergemaster again to update the remaining configuration files.
mergemaster
Reboot. Ta da 4.7-RELEASE, assuming everything went smoothly.
Good Luck.
- Mike Hogsett
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions
Edit the gecos field in the /etc/password file
How do I change the name of my email from Charlie Root?
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Ooops forgot the list...
---BeginMessage---
Instead of replacing the NIC can't he just use the link address family
option in ifconfig to assign a different MAC address so that it appears to
be a different machine?
flagg# ifconfig fxp1
fxp1: flags=8802BROADCAST,SIMPLEX,MULTICAST mtu 1500
Or perhaps the immutible flag set on /etc/passwd by default and have vipw
and adduser (un)set this automagically when used.
- Mike
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
(10.21.2002 @ 1514 PST): Bsd Neophyte said, in 0.8K:
--- DaleCo, S.P.---'the solutions people' [EMAIL
I haven't done FreeBSD installs on a laptop before, but you may be able to
use kern.flp and mfsroot.flp to boot the installer and do a network
install if you have a supported NIC card.
Good luck,
- Mike
I have an older laptop that doesn't have a bootable CD-ROM. The bay
either holds a CD
My question is what are common pitfalls a Linux user finds in a BSD
world?
They spend too much time wondering why they were using Linux.
- Mike Hogsett
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
you with.
- Mike Hogsett
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Try reinstalling gnu gettext /usr/ports/devel/gettext
( I think that provides libintl.so.2 )
Hello,
On FreeBSD 4.7 I installed Yahoo Messenger (both ways: pkg_add and
ports) and things don't work at all. Here is the error message I get:
/usr/libexec/ld-elf.so.1: Shared object
,
- Mike Hogsett
OK, got disk up. (Problem was I didn't know its make. ad3s1 eventually
worked.)
Now it seems I can't make it writable by anyone but root:
diva# ls -l viv.html
-rwxr-xr-x 1 root wheel 1987 Jul 4 05:21 viv.html
diva# chmod g+w viv.html
diva# ls -l viv.html
-rwxr
Is is better to run a 2nd drive on another IDE channel or on the same
bus? Eg. IDE channel 1 = ad0 (main OS), IDE channel 2 = ad1 (other data
- maybe MySQL and websites?)
Yes I would recommend this, but I would also recommend not having a CD
drive on the same bus as a heavily used disk
There is not cost for FreeBSD, at all. Use it for whatever you want or
need.
I was thinking of setting up a server unix n every one else to use os
with server inviroment and have paying customers wants to carge to
license software. does freeBSD?
To Unsubscribe: send mail to [EMAIL
/usr/ports/www/mod_php4/
I want to host (or whatever) the site myself. I think it would be a
good learning experience for me. I know where apache is in the ports
but where is php?
On Fri, 1 Nov 2002 17:48:17 -0500
david [EMAIL PROTECTED] wrote:
On Friday 01 November 2002 15:32, Bryan
To find something in the ports collection,
do this:
$cd /usr/ports
$make search key=(keyword)
...in your case, 'php' or 'mod_php'
should have done the trick.
Although in cases of libraries (or similar ports) where many other ports
depend on it this can return way too many results. In
I don't really think it makes much of a difference. Support for the card
will depend much more on the version of X you have installed and whether
that version supports the card (assuming you will be running X). If it is
just for the system console I don't believe it will matter at all, unless
How can you get a precompiled binary version of FreeBSD for the x86
platform? Is it available through downlod? [EMAIL PROTECTED]
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mirrors.html
Specifically :
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/mirrors-ftp.html
Sorry to jump into the middle of this thread, but I have recently
installed Apache 1.3x, mod_php4, and mysql on a 4.7 box. I simply
installed apache from the ports, mod_php from the ports and mysql from the
ports. The mod_php port asks what support you want built in before
building, an option
Hmm. Looks to me that they need to change:
www.hamanndonald.com10800 INCNAME stimpy
to
www.hamanndonald.com10800 INCNAME stimpy.hamanndonald.com
or to
www.hamanndonald.com10800 INA 198.88.146.57
$ host -all hamanndonald.com
rcode = 0
- Original Message -
From: Carlos Carnero [EMAIL PROTECTED]
To: DaleCo Help Desk [EMAIL PROTECTED]; FreeBSD Questions
[EMAIL PROTECTED]
Sent: Tuesday, November 05, 2002 2:07 PM
Subject: Re: Junior hacker assignment :o
Hello,
--- DaleCo Help Desk [EMAIL PROTECTED] wrote:
Look in /usr/src/sys/kern/kern_shutdown.c
static void
shutdown_halt(void *junk, int howto) {
...
}
Looks interesting.
- Mike
Hi,
--- Mike Hogsett [EMAIL PROTECTED] wrote:
Well whatever function the kernel is in while it
loops, polling the
keyboard asking press any key to reboot
/group also.
- Mike Hogsett
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
Thanks for the replies, guys, it's (freakin' finally) working.
Thank the NIS Gods.
I don't know if it was the extra blank line before the +: in
/etc/master.passwd was the culprit
It is likely.
or the weird characters in
/var/yp/ypservers. I did some reading to try and find
Checksum mismatch for ghostscript/eplaser-3.0.4-651.tgz.
Suggestions? ( cvsup'd /usr/ports this morning )
- Mike
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
void die_you_gravy_sucking_pig_dog();
I believe this function can be traced back quite a few years to the
original Berkeley releases.
To Unsubscribe: send mail to [EMAIL PROTECTED]
with unsubscribe freebsd-questions in the body of the message
I don't think that FreeBSD-Questions is the forum for this discussion.
- Michael Hogsett
Erik writes:
Have you read any of the license agreements normally
accompanying commercial software? The big companies
generally don't guarantee a bloody thing about the
software, least of all
This may or may not be helpful :
http://www.epkowa.co.jp/english/linux_e/pips_dwn_e.html
- Mike Hogsett
(msg sent twice as I did not get feeback)
hi, I have an Epson Stylus Color 880 which I want to run through
apsfilter (or any other server) for lp but:
# /usr/ports/print/pips-sc880
How do I get rid of the annoying Kerberos message?
Thanks,
- Mike
[beast] [hogsett] [~]
-- telnet switch-a
Trying 130.107.2.200...
Connected to switch-a.csl.sri.com.
Escape character is '^]'.
User Access Verification
Password: Kerberos: No default realm defined for Kerberos!
To
Wow! An English right here on FreeBSD-Questions!
On Fri, Nov 22, 2002 at 10:32:54AM -0800, Gary W. Swearingen wrote:
What purpose do they serve ?
A System Manager can put the users in the appropriate groups
for their work.
I have never seen them used on any Unix system I have worked
I want to be able to spoof a mac address of a nic in my machine so i can
run a router(bsd) parralel to my router (LRP). The reason i want to
spoof the mac address is because i don't want to call my isp and have
them change my mac address. can someone tell me where to look or howto
spoof a
If I simply type apple in the address bar IE will prefix apple
with http://www.; and add the .com suffix, after failing to connect
to just apple.
I do not find this to be the case. I have a machine (hogx.csl.sri.com)
and on my windows box if I enter hogx into the location field it never
What is the difference between FreeBSD and OpenBSD?
I can't enumarate all the differences, but I know that OpenBSD does not
support SMP hardware.
Which flavor of BSD is the most secure straight out of the box?
The one powered off. I don't know sorry.
To Unsubscribe: send mail to [EMAIL
# [EMAIL PROTECTED] / 2002-12-03 11:11:24 -0800:
I just cvsup'd, buildworld, installworld, etc. this morning to RELENG_4_7.
/usr/bin/top is segfaulting...
FreeBSD flagg.csl.sri.com 4.7-RELEASE-p2 FreeBSD 4.7-RELEASE-p2 #6: Tue
Dec 3 10:42:13 PST 2002
[EMAIL
I think you have corrupted src. I am running basically the same source -
util.c from diff and not having any problems. I would clean out
/usr/src/contrib/top, recvsup, and rebuild everything.
You said rebuild everything. Did you mean world/kernel or just top. I
cleaned out top and rebuilt it
I think you have corrupted src. I am running basically the same source -
util.c from diff and not having any problems. I would clean out
/usr/src/contrib/top, recvsup, and rebuild everything.
You said rebuild everything. Did you mean world/kernel or just top. I
cleaned out top and
flagg# top
Segmentation fault
flagg#
I got a core file and ran gdb... I know almost nothing about gdb, but what
the heck.
(gdb) where
#0 0x2810cbd8 in endpwent () from /usr/lib/libc.so.4
#1 0x2810d421 in endpwent () from /usr/lib/libc.so.4
#2 0x2810c1da in getpwent () from
1 - 100 of 115 matches
Mail list logo
