ImageMagick, pecl-imagick (FreeBSD vs Ubuntu) problem (djvu as well?)

I have a server that I just put together to work with image creation. Its running lighttpd with php being handled by php-fpm all from ports running 8.2 amd64. My problem is quite strange; a simple php script reading in a djvu file (via Imagick()) causes php to hang and not do anything. - no

HP ML110 G6.. Raid 0+1 nfg?

Not sure if this is supported.. Looks like the card is an HP Smart Array B110i.. But when setup as raid 0+1 in the bios.. FreeBSD 8.0 amd64 says it can not find any disks.. Anyone have this working? Thanks in advance. ___

bash-static question..

I was compiling and saw this message.. cc -DPROGRAM='bash' -DCONF_HOSTTYPE='amd64' -DCONF_OSTYPE='freebsd8.0' -DCONF_MACHTYPE='amd64-portbld-freebsd8.0' -DCONF_VENDOR='portbld' -DLOCALEDIR='/usr/local/share/locale' -DPACKAGE='bash' -DSHELL -DHAVE_CONFIG_H -I. -I. -I./include -I./lib

problem with php5-snmp

Trying to update all ports since updating to 8.0.. already rebuilt all ports and did a yes | make delete-old-libs so none of that is the problem.. php5-snmp would not rebuild. Not sure where the problem is.. but below is tons of output.. below is the output of the build: r...@core

Re: problem with php5-snmp

So what does config.log say? cat -n work/php-5.2.11/ext/snmp/config.log 1 This file contains any messages produced by compilers while 2 running configure, to aid debugging if configure makes a mistake. 3 4 It was created by configure, which was 5 generated by

8.0-R.. does arp not sort correctly anymore?

How strange.. arp is not printed in the order it used to be.. FreeBSD milenko.homelan 8.0-RELEASE FreeBSD 8.0-RELEASE #0: Wed Nov 25 13:33:49 EST 2009 r...@milenko.homelan:/usr/obj/usr/src/sys/GENERICplus amd64 r...@milenko [~]# 17 arp -an ? (192.168.1.9) at 00:12:3f:7e:b8:10 on bge0

Re: most bizarre libc.so.7 problem

to test this with.. Possibly the flag would have helped me install, but I could not find another way to zfs upgrade -a and get / without going to a livecd.. On 10/25/09 10:38 PM, Mel Flynn wrote: On Saturday 24 October 2009 14:33:53 B. Cook wrote: B. Cook wrote, On 10/24/2009 7:43 AM

most bizarre libc.so.7 problem

I have a machine at home that I build releng_7 on from time to time; about once a month or so. yesterday I did that, and this AM I have libc.so.7 errors all over the place. turns out libc.so.7 was not in /lib I had to boot into /rescue/sh and get my zfs stuff mounted and do a quick cp from

Re: most bizarre libc.so.7 problem

B. Cook wrote, On 10/24/2009 7:43 AM: I have a machine at home that I build releng_7 on from time to time; about once a month or so. yesterday I did that, and this AM I have libc.so.7 errors all over the place. turns out libc.so.7 was not in /lib I had to boot into /rescue/sh and get my

net.inet.ip.random_id possible ASA problems?

Morning, I am running several FreeBSD 7.x servers in an setting where we recently went from controlling the border firewall with PFSense; We were mandated to replace it with an outside provider which has an ASA in place. And we are having TONS of issues..

reboot after panic: ufs_dirbad: /var...

Here is the full error: Aug 13 09:29:57 gameface savecore: reboot after panic: ufs_dirbad: /var: bad dir ino 3485849 at offset 3584: mangled entry The error causes the machine to keep rebooting on its own over and over again. i386 7.2-RELEASE FreeBSD 7.2-RELEASE #0: Wed May 20 16:56:48 EDT

Re: reboot after panic: ufs_dirbad: /var...

On Thu, August 13, 2009 3:15 pm, Roland Smith wrote: On Thu, Aug 13, 2009 at 12:25:21PM -0400, B. Cook wrote: Here is the full error: Aug 13 09:29:57 gameface savecore: reboot after panic: ufs_dirbad: /var: bad dir ino 3485849 at offset 3584: mangled entry The error causes the machine

cups 1.3.10 problem?

installed cups 1.3.9 on a machine a while back and successfully sharing a dozen or so jetdirects via samba. as part of regular updates I updated to 1.3.10 (no visible problems) until I tried to access the web interface. https://servername:631 I [12/Jun/2009:15:35:03 -0400] Listening to

does isoqlog work in amd64?

just wanted to ask if anyone has the mail/isoqlog program working on an amd64 box. We have it working on i386 FreeBSD 7.x but it sig11's on amd64. looking to have it filter exim logs fwiw. I have sent emails to enderunix and not heard back.. and if it does not work, has anyone actually made

globally limit fetch download?

I have several FreeBSD machines located at different sites on very slow DSL lines. Is there a way that I can limit the bandwidth that fetch uses when it fetches ports? ___ freebsd-questions@freebsd.org mailing list

zfs raid and/or hardware raid..

I have a dimension 9150 that I am going to put amd64 freebsd on to play with. It has Intel ICH7 SATA300 on it, in the bios it says it can do raid. I'm assuming that would be a hardware raid.. Would I be better off just using two disks and mirror them in software raid (zpool) or using the

zfs trauma from locate?

So I've been having much trauma with zfs and i386; but it seems it's been narrowed down to the 'weekend'. We leave friday and come back monday, and monday this box is not working properly. Nothing has crashed, it's just slow.. but there is no load on the box; just deathly slow.. 2+ minutes

Re: Looking for a Good FreeBSD and General Unix Backup System

Mamlookie wrote, On 1/28/2009 1:29 AM: I just stumbled upon BackupPC yesterday, so I amnot sure how good it can be because I haven't had time to test, but nothing stops you from looking at it, now that you are after a solution. Please see http://backuppc.sourceforge.net PS: If you do test it

zfs on i386 trauma :P

Hello all, We had a raid card die in a dell box and reinstalled FreeBSD 7 and restored from backups.. the problem is amd64 didn't boot on the box and the person doing the restore wanted to 'help' and changed from ufs2 to zfs.. while being a noble effort, he was testing on amd64 and didn't think

make pdf from webpage on webserver (no x11)

Trying to figure out how to print a webpage on the server, without a gui.. On the local test webserver that we have we are trying to figure out how we can from php (or anything else) print a webpage to a pdf.. Anyone have a clue as to how to do this? Or is this some major php programming to

ports-mgmt/portmaster question

Is there a way to pass make args (other than -m) for each port? For example if I use -m BUILD_STATIC=YES and -m BUILD_OPTIMIZED=YES for mysql50-server.. other than remembering that I did that.. is there someway to have portmaster read its portmaster.rc and get that information?

open-vm-tools

I have a freebsd 7.0 client running in an vmware cluster. Is there something that I am missing, or that something I can do to make this go away? The owner of the cluster is telling me he keeps getting this in the logs: -Unfortunately I'm still seeing these in the VMWare log every minute

Re: quick slice question..

On Sep 23, 2008, at 3:33 PM, B. Cook wrote: I have slices a, d, e, f, g, and h.. I wouldn't be able to get one more would I? using gmirror and RELENG_7_0.. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo

quick slice question..

I have slices a, d, e, f, g, and h.. I wouldn't be able to get one more would I? using gmirror and RELENG_7_0.. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail

Re: vmware tools for ESX Server 3.5

On Sep 3, 2008, at 12:11 PM, John Nielsen wrote: On Wednesday 03 September 2008, B. Cook wrote: I am setting up FreeBSD 7.0 and he is asking about the vmware-tools. Ports has some things, but I am not sure what I need, and neither is he. Can anyone tell me what it needs? I usually

vmware tools for ESX Server 3.5

Hello, I am setting up FreeBSD 7.0 and he is asking about the vmware-tools. Ports has some things, but I am not sure what I need, and neither is he. Can anyone tell me what it needs? Thanks in advance. ___ freebsd-questions@freebsd.org mailing list

PAE or 64bit?

hey all, Looking for opinions.. We are going to be getting a server for drupal, running lighttpd and php, as well as exim and SA with clamav, courier or dovecot, mysql 51.. etc. Right now this setup does about 200G per month (we have two boxes) and were looking at getting one box to do

get periodic to not scan a partition

hello all, I have a machine doing backups with backuppc (excellent program btw) and I have them being stored in /exports /dev/ad4s1h 57G 31G 21G60%/exports /dev/ad4s1h on /exports (ufs, local, noatime, soft-updates) it is now almost 6:20 am and periodic has been running

Re: get periodic to not scan a partition

On Aug 2, 2008, at 8:19 AM, RW wrote: On Sat, 2 Aug 2008 06:22:17 -0400 B. Cook [EMAIL PROTECTED] wrote: hello all, I have a machine doing backups with backuppc (excellent program btw) and I have them being stored in /exports /dev/ad4s1h 57G 31G 21G60%/exports /dev

secure access to AS/400 ?

Hello All, Seems OT, but I have been asked to give someone remote access to an AS/ 400 we have here. As I am not knowledgeable about AS/400's I do not know if there is an openssh/sshd app that could be put on there. They give everyone access 'locally' via telnet and some IBM gui app at

OpenNTPd howto?

Hello All, Not sure what I am missing, but I am. so I put openntpd on a machine (10.20.0.16) cat ntpd.conf | egrep -v ^# listen on 0.0.0.0 server clock.nyc.he.net then start it and it looks like it does: USER COMMANDPID FD PROTO LOCAL ADDRESS FOREIGN ADDRESS _ntp

Re: OpenNTPd howto?

On Jul 1, 2008, at 1:21 PM, Bill Moran wrote: In response to B. Cook [EMAIL PROTECTED]: Hello All, Not sure what I am missing, but I am. so I put openntpd on a machine (10.20.0.16) cat ntpd.conf | egrep -v ^# listen on 0.0.0.0 server clock.nyc.he.net then start it and it looks like

Re: OpenNTPd howto? [success]

-0.000727 sec On Jul 1, 2008, at 1:28 PM, Steve Bertrand wrote: B. Cook wrote: Hello All, Hey, [EMAIL PROTECTED] [/usr/local/etc]# 32 ntpdate -b clock.nyc.he.net 1 Jul 12:49:57 ntpdate[70917]: step time server 209.51.161.238 offset 358.732506 sec Why when it was running did

gmirror and resizing partitions..

Hello all, I have a FreeBSD 7 machine that I am running gmirror on (ad4 and ad6). there is an /exports and /home that need to be resized. (right now they each are about 55G and /home needed to have been 100G and exports 10G) what do I need to do to fix this. I am assuming break the

Re: gmirror and resizing partitions..

On Jun 9, 2008, at 12:12 PM, Wojciech Puchar wrote: there is an /exports and /home that need to be resized. (right now they each are about 55G and /home needed to have been 100G and exports 10G) more exact info please. gmirror status mount or cat /etc/fstab NameStatus

samba/cups printer with quotas?

Hello All, Someone here just got back from an Apple 'show'. They were told that Leopard Server (powered by cups and samba) could give us quota control as well as authenticated printing with 'history' (as to who printed what and how many pages.. ) I am still trying to get a clue on this..

DQ965GF Finally Works..

Hello all, I have a few of these that have been problematic with several seemingly simple things.. like 1000baseTX and booting in under 5 minutes (polls the floppy for almost 4 minutes).. but with FreeBSD 6.3 the motherboard seems 'normal' finally. wanted to say thank you and post a dmesg

Upgrading to 7 from 6.3

Hello All, I was going to try and update a box from 6.3 to 7 via buildworld all 32 bit, nothing 64. Assuming it should be done like this: make buildworld make buildkernel mergemaster -p make installkernel (reboot) (startup on 7 kernel) make installworld mergemaster (do full mergemaster)

Re: Upgrading to 7 from 6.3

[EMAIL PROTECTED] wrote: Dominic Fandrey [EMAIL PROTECTED] writes: B. Cook wrote: Hello All, I was going to try and update a box from 6.3 to 7 via buildworld all 32 bit, nothing 64. Assuming it should be done like this: make buildworld make buildkernel mergemaster -p make installkernel

looks like success

Hello all, make delete-old (took a long time to do by hand) and make delete-old-libs (went rather quickly) but bash needed to be rebuilt while things were still running.. (quick try to login remotely showed that libcurses had changed.. ) /libexec/ld-elf.so.1: Shared object libncurses.so.6

Calendar Solution?

Hello All, Anyone have any suggestions for a 'corporate' calendar? Either ports or DIY or other .. I am trying to get them on the idea of an OSX server.. They are using words like 'Exchange' and 'Externally Hosted Exchange' servers.. (just sends a chill down my spine.. ) We have our

Recommendations? Small Department IM server

Hello All, I am looking for an im server that runs on FreeBSD (preferably from ports) for ~20 people with SSL/TLS. I see there is jabberd and ejabberd (anything else to consider?) It seems that ejabberd needs java and all sorts of other things.. and that jabber needs mysql ;) Am I missing

sysutils/lockdown

Hello All, Is this still a valid working port for a FreeBSD 6.2 box? It looks as if it has not been touched since 2005. Is there anything else that does this? Thanks in advance, ___ freebsd-questions@freebsd.org mailing list

MSI PM8PM-V problem?

Hello all, I have two boxes here, both identical hardware. One box is setup to use the sata controller for raid the other is not. The one with the raid works great, the other one does not.. 6.2-R-p5 on the raid 6.2-R on the non raid. It seems when I bring 6.2-R up to the latest version, is

CAM Status: SCSI Status Error

Hello all, I saw this the other day.. and it happened while we were moving computers around while they were powered on.. (da0:ahc0:0:0:0): WRITE(10). CDB: 2a 0 1 81 a1 3f 0 0 20 0 (da0:ahc0:0:0:0): CAM Status: SCSI Status Error (da0:ahc0:0:0:0): SCSI Status: Check Condition (da0:ahc0:0:0:0):

what do you do with daily, weekly, monthly outputs..

Hello All, What do you do with the FreeBSD emails that each server you have sends you every day? I'm wondering if I could be doing something useful with them as opposed to keeping them in a folder and then deleting them after time. ___

syslog.conf questions..

Hello all, I am trying to have different cisco routers log to a different log file. The log file is located on a 6.2 box running the stock syslogd. For what it is worth I have nine of these, only three are shown syslogd is running with -n -vv -d at the moment.. I did not have to specify

Confused about dhclient .conf and -script..

I am trying to make a FreeBSD machine that gets a dynamic ip from a pfsense box work the same way as a Windows machine does. After reading way more about isc-dhcpd than I wanted to, I found out that I can customize /etc/dhclient.conf (great). I found a great dhclient.conf but it seemed to do

Thin client question..

Hello all, I was wondering if anyone had an OS-less thin client that does RDP and X11. Sound is also a requirement. Anyone ever seen something like this before? Thanks in advance. ___ freebsd-questions@freebsd.org mailing list

Dell M90 bge0 firmware handshake timeout

Hello All, Brand new Dell M90 here, replacing the directors Linux laptop w/ a FreeBSD.. and of course it's not a smooth one.. :p dmesg at bottom.. the bge0 device gives a firmware handshake timed out, when trying to get dhcp. Using a Netgear/Dlink (at his home) he says it never gets an IP,

newbie amd64 force 32bit nvidia-driver port

Hello all, I'm trying out amd64 on this Dell M90, and it seems to be going great.. *except* the nvidia-drivers port won't compile on amd64.. so I took out the i386 entry in the Makefile and it gets to a part where its linking and gets this: === Building for nvidia-driver-1.0.9746 === src

5.3 - 6.2 should work right?

I'm inheriting an older network and I'm trying to update it.. cvsup to 6_2.. Doing a build kernel install kernel then reboot and build world install world mergemaster -p if needed then rebuild the kernel and reinstall it.. right? I couldn't see anything major in UPDATING.. am I missing

Moving to a new disk..

Hello all, I've got a dying drive on my hands.. and I know I found a doc/guide on the handbook before regarding this.. something like.. # tar cf - --one-file-system -C /var . | tar xpvf - -C /mnt/var where the new drive is fsck'd and mounted at /mnt .. or something else.. where is that?

Re: Moving to a new disk..

B. Cook wrote: Hello all, I've got a dying drive on my hands.. and I know I found a doc/guide on the handbook before regarding this.. something like.. # tar cf - --one-file-system -C /var . | tar xpvf - -C /mnt/var where the new drive is fsck'd and mounted at /mnt .. or something else

Re: Moving to a new disk..

Eric wrote: B. Cook wrote: Where could I tell him to get a live cd? the installer CDs offer the option to drop into single user mode.. but it just goes right to the installer.. :P http://www.freesbie.org/ Was looking for something smaller.. Other than 635M to run dd

Re: FreeBSD 5.5 Dell 2950 PERC 5/i mfi question

Krempasky, Mark wrote: Hi, We have a requirement to run FreeBSD 5.5 on a few Dell 2950's. Unfortunately FreeBSD5.5 doesn't have the mfi drivers for the PERCK 5/I controllers. Does anyone know of a reasonable work around to load the drivers before sysinstall and then a way to permanently install

ntpd why question..

Hello all, Looking for why there is an /etc/ntp/ dir by default... The man page for ntpd says /etc/ntp.conf is the config file as does the handbook.. Whats it there for? TIA ___ freebsd-questions@freebsd.org mailing list

Need to Emulate Linux..

And I'm wondering what is 'lighter/smaller' linux_base-fc4 or linux_base-suse-9.3 I'm already running the linprocfs and that's not enough.. Its for a program called 'ezproxy' for us here at the library. We used to use the linux_base-debian.. but that seems to have been removed a while

When to use SUID Perl (5.8.x)?

Hello, Just wondering what do you need suid perl for? I run a webserver for staff users, and have had no real need for it, and considering removing it. I think it goes to back the days when SA (possibly?) needed it and I just cp'd the make.conf across boxes over the years.. :) it is a

Exim As MTA

I am running Exim as a sendmail replacement, and I keep getting a Message failure - message too big in my inbox for root. (looks like from daily run output) A message that you sent was longer than the maximum size allowed on this system. It was not delivered to any recipients. -- This is

make installworld fails error 126

Hello All, I have always had this problem on the one or two (web) servers that I have a separate /tmp partition defined. I found the answer a long time ago to unmount /tmp and try again and that always works.. but I've never found a way to make installworld with a separate /tmp partition on

ports/java/jdk15

Hello All, Trying to build java 1.5.0 and it looks like it's needs linux java 1.4.2? is this right? === linux-sun-jdk-1.4.2.12 You must manually fetch the J2SE SDK self-extracting file for the Linux platform (j2sdk-1_4_2_12-linux-i586.bin) from

Re: ports/java/jdk15

Jona Joachim wrote: B. Cook wrote: Hello All, Trying to build java 1.5.0 and it looks like it's needs linux java 1.4.2? is this right? === linux-sun-jdk-1.4.2.12 You must manually fetch the J2SE SDK self-extracting file for the Linux platform (j2sdk-1_4_2_12-linux-i586.bin) from http

Re: rcorder example?

RW wrote: On Tuesday 20 June 2006 15:15, B. Cook wrote: Hello all, I'm looking at what I think is the right answer.. but can't make sense of it.. basically I have a couple of mailservers that run exim and dnscache, all being called out of daemontools. but I can't seem to figure out how

rcorder example?

Hello all, I'm looking at what I think is the right answer.. but can't make sense of it.. basically I have a couple of mailservers that run exim and dnscache, all being called out of daemontools. but I can't seem to figure out how to make svscan start first.. # PROVIDE: svscan # REQUIRE:

dhcpd.leases not getting populated..

Hello all, I have about 8 isc-dhcpd3-server installs out there and they all do everything they are supposed to.. all but one. And of course it's the most complex of them all, (as compared to the rest) I have a subnet defined with two pools inside. The top pool is set to deny unknown

Re: dhcpd.leases not getting populated..

Nick Withers wrote: On Mon, 05 Jun 2006 09:06:23 -0400 B. Cook [EMAIL PROTECTED] wrote: Don't suppose you'd be able to post the configuration of the subnet, would you? http://www.poklib.org/~dhcpd/dhcpd.conf Are you sure that leases are being handed out from the first pool? yes

Shared Memory?

Hello All, I'm not a programmer and nor do I play one in real life.. :) I've recently setup a DansGuardian box for someone and I had some interesting things happen. When the box would get under load (500+ simultaneout connections) it would load up the cpu: last pid: 69931; load averages:

src upgrade from 4.11-p16 to 5.4 possible?

Hello all, I am running a set of 5 FreeBSD 4.11 p16 servers here at the library. For various reasons we are unable to 'get new drives' and install FreeBSD 5/6 and then migrate userland data to a new drive. I have been able to get my hands on a test box from someone to test src upgrading

Re: src upgrade from 4.11-p16 to 5.4 possible?

So would going from 4.x to 5.2.1 be an easier and then from 5.2.1 to 5.4 and then to 6? Is there a binary OS upgrade that could be done? and then a manual mergemaster? This sempron box is not ours to keep.. :( ___ freebsd-questions@freebsd.org

Re: src upgrade from 4.11-p16 to 5.4 possible? (some success)

Derek Ragona wrote: I recently did this exact operation. It went fine for me on my second try. The first one I determined didn't go well as I didn't have the system up to date first. So on my second attempt I made sure my 4.11 system was up to date, and did a complete buildworld,

Re: src upgrade from 4.11-p16 to 5.4 possible? (some success)

[EMAIL PROTECTED] /usr/src]# echo $? 0 [EMAIL PROTECTED] /usr/src]# make -j6 buildworld The CPUTYPE is not defined in /etc/make.conf, trying to make a clean build.. and this is RELENG_5_2_1 so make buildworld on this box completes. I am going to try RELENG_5_3 and then if so then good ;)