[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Michael Sierchio
Sent: Thursday, April 11, 2013 7:44 AM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
Subject: Re: EC2 Instances Future
I have constructed several AMIs. If I get a sense for which flavor of
instance/OS combos are of interest, I can
anonymous
FTP sites?
-Original Message-
From: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Sean DuBois
Sent: Tuesday, April 09, 2013 8:35 PM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
Subject: Re: Amazon VPC instances
I don't know about
Have you made any AMI's based on this method? I would love to deploy a
medium or large instance that isn't subject to the 'tax', but don't really
know where to start to build one like this.
-Original Message-
From: owner-freebsd-questi...@freebsd.org
Has anyone used Colin Percival's FreeBSD builds for Amazon EC2 to build an
Amazon VPC instance? If so, does it support multiple network interfaces or
aliases with multiple IP's so that I can run multiple SSL certs on the same
instance?
Thanks!
___
I've got an older FreeBSD 6.1 install that will no longer allow me to build
any software distributions. Any time I try to do a 'configure', the
configure seems to run fine, then I get a config.status: error: cannot find
input file:. This has happened on several packages from several different
: owner-freebsd-questi...@freebsd.org
[mailto:owner-freebsd-questi...@freebsd.org] On Behalf Of Michael Sierchio
Sent: Sunday, March 31, 2013 10:04 PM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
Subject: Re: Problems with IPFW causing failed DNS and FTP sessions
net.inet.ip.fw.dyn_short_lifetime
...@tenebras.com]
Sent: Monday, April 01, 2013 7:23 AM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
Subject: Re: Problems with IPFW causing failed DNS and FTP sessions
Okay, what's your DNS setup? Are you running a recursive cache that
contacts the root servers directly? Using your ISP's servers? Etc
Hi everyone. recently my server started having issues with DNS and FTP
sessions either not resolving or timing out. I've tracked the issue down to
IPFW. if I issue a 'sysctl net.inet.ip.fw.enable=0' then my issues go away.
I have the basic rules like this for dns;
01160 allow udp from any
Hi everyone. recently my server started having issues with DNS and FTP
sessions either not resolving or timing out. I've tracked the issue down to
IPFW. if I issue a 'sysctl net.inet.ip.fw.enable=0' then my issues go away.
I have the basic rules like this for dns;
01160 allow udp from any
, and there aren't. I'm
not running NAT, it's a publically accessible IP address.
-Original Message-
From: Michael Sierchio [mailto:ku...@tenebras.com]
Sent: Sunday, March 31, 2013 8:58 PM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
Subject: Re: Problems with IPFW causing failed DNS
Hi All,
So I use zfs for the root file system. Works well. However now I want to
move /tmp to ram-disk (memory disk or what ever). When I try to unmount
/tmp with the zfs command of course it won't because its busy. With ufs I
would just edit fstab and reboot what do I don with zfs??
Thx
but then
I must go through add they files on the new box change uids and gids.
Question is there an easier way??
Thx in advance...
Don
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
On Mon, 7 Jan 2013 11:49:48 -0800, Don Dugger wrote:
The question is about dealing with adding users. I been using NIS for a
while now it works ok however I've had to keep good notes on how to do
thing mainly because I don't add user or boxes very often. I'm a software
engineer not a system
I'm getting ready to setup a new FreeBSD 8.1 64 bit server and wanted to
know everyone's thoughts on which way to go. software RAID 5 (or 10) or
hardware RAID 5 (or 10). I currently have a 3Ware card in one of my servers
and it works great, but I haven't really been keeping up on what the latest
On 1 Dec, Ondřej Majerech wrote:
Hello,
my 8.1-R system has just started hanging on reboot. Specifically after
I svn up'd my source and updated from 8.1-R-p1 to -p2.
Some kind of hang occurs on every reboot attempt. Usually it hangs at
the Rebooting... message, but sometimes the thing
I recently loaded 8.1 Rel on a box using the same basic configuration as a
7.1 Rel box I was replacing.
Everything works except the box won't work as a gateway now. Is there
something new in 8.1 that would change the basic configuration that I
would need to change.
Thx in advance...
Don
Heres
://wiki.freebsd.org/AdrianChadd
Take Care!
- Don
王跃辉 wyh1...@gmail.com 04/21/10 10:21 AM
hi
I have a problem when I try to install FreeBSD as client OS on a
Linux
OS. following the instruction I find that I can't open the website of
www.fsmware.com to finish some download work. it seems
Sorry for my previous top-post, was a mistake!
I forgot to mention, check out this website as well, it has instructions
for running 8.0
in paravirtualization mode in Xen.
http://www.ita.com.ua/eng/articles.htm?id=34
- Don
___
freebsd-questions
thank you, thenk you, thank you :)
On Thu, Mar 4, 2010 at 4:41 PM, Ross we...@connection.ca wrote:
dJ What come up with 8.0-RELEASE is the new FreeBSD
dJ Documentation Installation Menu in sysinstall. I would like to know
dJ what command for install.cfg to configure my installation with, say,
You need to use 'vboxtool'...
http://vboxtool.sourceforge.net/
-Original Message-
From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
questi...@freebsd.org] On Behalf Of Aiza
Sent: Thursday, March 18, 2010 5:45 PM
To: FreeBSD Questions
Subject: VirtualBox from the
On Wed, Feb 24, 2010 at 3:51 PM, don Juan fmem...@gmail.com wrote:
Hi,
What come up with 8.0-RELEASE is the new FreeBSD
Documentation Installation Menu in sysinstall. I would like to know
what command for install.cfg to configure my installation with, say,
English Documentation.
i've found
, but FreeBSD probably already can take advantage of it.
--
Don Readdon_r...@att.net
It's always darkest before the dawn. So if you are going to
steal the neighbor's newspaper, that's the time to do it.
___
freebsd
Hi,
What come up with 8.0-RELEASE is the new FreeBSD
Documentation Installation Menu in sysinstall. I would like to know
what command for install.cfg to configure my installation with, say,
English Documentation.
i've found this question already posted to this forum but it's still
unanswered.
changed in the port between
5.1.2
and 5.2.12
1.add
WITHOUT_X11=yes
in /etc/make.conf
2.remove
X11BASE=
from that file and
4.make all-depend-list
5.make clean all depend soft
6.make menuconfig set X11 disable
7.make make install
2010/1/12 Don O'Neil li
clean all depend soft
6.make menuconfig set X11 disable
7.make make install
2010/1/12 Don O'Neil li...@lizardhill.com:
Ok.. just for grins I installed a new instance of 6.1, NO Patches,
just
straight off the ISO...
I loaded the ports that came WITH the distro, and was able to make
php
Ok.. just for grins I installed a new instance of 6.1, NO Patches, just
straight off the ISO...
I loaded the ports that came WITH the distro, and was able to make php 5.1.2
ok...
When I did a portsnap fetch, portsnap extract, then went into the
/usr/ports/lang/php5 and just typed make I get the
I tried adding WITHOUT_X11=yes to /etc/make.conf as well as X11BASE=
and
X11BASE=, but I still get the same error.
Remove them. This makes sure they are not defined, not even
empty (as in #define BLA - symbol 'BLA' is defined).
Where to go from here? Do I have and old version of
: Friday, January 08, 2010 10:35 PM
To: Don O'Neil
Cc: php-gene...@lists.php.net; freebsd-questions@freebsd.org
Subject: Re: Clean PHP 5.2.12 Build Core Dumping
On Fri, 8 Jan 2010 16:18:11 -0800, Don O'Neil li...@lizardhill.com
wrote:
Ok... more info on the problem...
I started with a clean
Well, I hadn't edited the Makefiles, I was planning on it (but won't now
that you pointed out the make option), but never got past making the generic
port
I tried adding WITHOUT_X11=yes to /etc/make.conf as well as X11BASE= and
X11BASE=, but I still get the same error.
Where to go from here?
I'm trying to build a clean version of php 5.2.12 on my FreeBSD 6.1 box and
even with NO OPTIONS, php core dumps during the make test phase.
How do I go about tracking down what is causing this problem?
___
freebsd-questions@freebsd.org mailing list
Ok... more info on the problem...
I started with a clean untarred archive, ad just ran ./configure, make, make
test I get a core dump.
After running gdb on the core dump I noticed it was the sqlite stuff that
was dumping, so I re-ran configure with --without-sqlite
--without-pdo-sqlite
On Tue, Oct 6, 2009 at 2:26 AM, Oliver Fromme o...@lurza.secnetix.de wrote:
Don Wilde dwil...@gmail.com wrote:
I am setting up the sendmail on my 7.2-STABLE system, and I cannot get
it to listen to my live server address besides the localhost.
I've added
me for not including them. No other changes
have been made to the mc file.
Thanks in advance! :D
--
-- Don Wilde
Engineering the Future
http://www.EngineeringJobFuture.com
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org
On Mon, Oct 5, 2009 at 8:27 PM, Bernt Hansson be...@bah.homeip.net wrote:
Don Wilde said the following on 2009-10-06 02:48:
Hello, folks -
I am setting up the sendmail on my 7.2-STABLE system, and I cannot get
it to listen to my live server address besides the localhost.
I've added
the hardware. Can you please advise if you do such services
or if you could refer us.
Many Thanks,
Don
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to freebsd-questions
the on the day of week.
Could you enable Wake-On-LAN in the BIOS and then configure another box
to wake it up via the LAN at your specified time?
- Don
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
My /var partition is showing a different value for a df -k on the file
system vs a du -s on the file system:
df -k
Filesystem1K-blocks Used Avail Capacity Mounted on
/dev/ad0s1a 202603088954497440448%/
devfs 1 1 0 100%/dev
an encrypted ssh connection. Suggestions welcome.
Thanks.
Dave.
Can you mount the files system(s) with nfsd?
Regards,
--
Don Readdon_r...@att.net
It's always darkest before the dawn. So if you are going to
steal the neighbor's newspaper, that's the time
of date or missing? then run script ...
etc. ...
--
Don Readdon_r...@att.net
It's always darkest before the dawn. So if you are going to
steal the neighbor's newspaper, that's the time to do it.
___
freebsd
/msg/5c759b1c87376b22?pli=1
Regards,
--
Don Readdon_r...@att.net
It's always darkest before the dawn. So if you are going to
steal the neighbor's newspaper, that's the time to do it.
___
freebsd-questions
to
track down the trouble.
Sam Fourman Jr.
Have you tried:
*default date=2009.04.28.23.59.59
Back when I had to get the old XOrg, *default date' in my ports-supfile
returned me to sanity ...
--
Don Readdon_r...@att.net
It's always darkest
Has anyone got a Compass 597 from Sprint to work?
And if so can I get some pointers?
Thx in advance...
Don 8)
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
pkg_delete.
Note the -f, --force argument.
furrfu ...
--
Don Readdon_r...@att.net
It's always darkest before the dawn. So if you are going to
steal the neighbor's newspaper, that's the time to do
On Tue, 17 Mar 2009 18:50:46 -0500 Charles Howse said:
Hi,
Can anyone point me to a link that shows the physical location of the
U.S. cvsup servers?
Not physical, but by wire time:
localhost# fastest_cvsup -c us
--
Don Read donr...@sbcglobal.net
On Tue, 10 Feb 2009 20:54:18 -0500 michael copeland said:
On Tue, Feb 10, 2009 at 8:52 PM, prad p...@towardsfreedom.com wrote:
i agree now that i think about it.
but what about the ipv6?!
vi versus Emacs?
--
Don Read donr...@sbcglobal.net
It's
Are there any disk size/volume size limitations on Vinum with FreeBSD 6.4?
Can I run Vinum on 4 500 G drives and get a 1Tbyte RAID10 config?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
With all the discussions of ZFS lately, I'm beginning to wonder if it's
really ready for a production environment. Concerns over memory utilization,
speed, stability, etc...
So, my question is this... If you were building a brand new 6.3/7.0 server
with decent performance (dual core, 32 Bit OS -
This is very cool. What is up with NetBSD and OpenBSD. Are these numbers
accurate?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Marc G. Fournier
Sent: Monday, November 03, 2008 2:34 PM
To: freebsd-questions@freebsd.org; [EMAIL PROTECTED];
[EMAIL
I just swapped out an old 500G disk with a 1TB one and I'm trying to
label it and mount it...
If I run bsdlabel -w ad4, I get:
bsdlabel: Geom not found
If I run sysinstall, it tells me that it can't write to the disk.
I've tried an old 'bypass': sysctl kern.geom.debugflags=16, but
On Mon, Oct 06, 2008 at 08:03:46AM -0700, Don O'Neil wrote:
I just swapped out an old 500G disk with a 1TB one and I'm trying
to label it and mount it...
If I run bsdlabel -w ad4, I get:
bsdlabel: Geom not found
If I run sysinstall, it tells me that it can't write
I just swapped out an old 500G disk with a 1TB one and I'm
trying to label it and mount it...
If I run bsdlabel -w ad4, I get:
bsdlabel: Geom not found
If I run sysinstall, it tells me that it can't write to the disk.
I've tried an old 'bypass':
On Mon, Oct 06, 2008 at 09:45:52AM -0700, Jeremy Chadwick wrote:
There is one thing about later FreeBSDs which I am aware of: 48-bit
LBA addressing. I'm left wondering if what you're running
into is a
bug or a problem with older FreeBSD (6.1) not supporting this. I
would have to go
The hardware I have is the built in SATA controller on the
motherboard, which is GIGABYTE GA-M61P-S3. With the NVIDIA GeForce
6100 / nForce 430 and Super I/O chip: ITE IT8716.
Oct 4 04:07:30 kermit kernel: atapci0: GENERIC ATA
controller port
I just swapped out an old 500G disk with a 1TB one and I'm trying to label
it and mount it...
If I run bsdlabel -w ad4, I get:
bsdlabel: Geom not found
If I run sysinstall, it tells me that it can't write to the disk.
I've tried an old 'bypass': sysctl kern.geom.debugflags=16, but that didn't
I've tried an old 'bypass': sysctl kern.geom.debugflags=16, but that
didn't help.
Can anyone help me get this new disk installed without having to boot
off a recovery CD? The server is 500 miles away from me and I don't
have direct console access.
Uhmm... This may seem silly, but did
I've tried an old 'bypass': sysctl kern.geom.debugflags=16, but
that
didn't help.
Can anyone help me get this new disk installed without having to
boot off a recovery CD? The server is 500 miles away from me and
I don't have direct console access.
Uhmm... This may
log files every hour, if necessary.
0 * * * * rootnewsyslog
# Rotate apache logs once a month
0 0 1 * * rootnewsyslog -f
/usr/local/etc/nsl.http.conf
#
Regards,
--
Don Read [EMAIL PROTECTED
suggestions! Please reply including my direct
address as I am not on the list subscription.
-- Don Wilde
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL
it by wiping the makefile and re-CVSupping, but that
does seem like the long way 'round.
Thanks in advance!
--
Don Wilde
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
On Sat, Mar 8, 2008 at 10:06 AM, D Hill [EMAIL PROTECTED] wrote:
On Sat, 8 Mar 2008 at 09:32 -0600, [EMAIL PROTECTED] confabulated:
Hello, all -
When building a port, specifically in this case qdvdauthor, I run into a
setup issue that makes me want to redo the configuration of the
I DID see that whoopsie in the previous post, thanks Giorgos!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to [EMAIL PROTECTED]
=$Title $1;
done;;
esac
shift
done
if [ -n $Title ]
then
xprop -id $WINDOWID -set WM_NAME $Title;
fi
Title=`xprop -id $WINDOWID | grep WM_NAME | cut -d= -f2`
echo $Adjective 'title :' $Title
exit 0
--
Don Read [EMAIL PROTECTED]
-- It's
What is the safest and cleanest way to update the ports in /usr/ports for a
6.1-STABLE install? I don't want to risk breaking anything, I just need some
updated ports so I can install the latest SpamAssassin port.
Thanks!
___
Anyone have any resources for building a FreeBSD based SAN device? IE, how
can I create an extendable file system using networked drives in muliple
boxes without paying a billion dollars for someones expensive drive arrays.
TIA!
___
Any time I compile PHP 4.4.7 with --with-ssl my apache 1.3.39 server core
dumps on start up on my FreeBSD 6.1 dual core AMD X2 box (in 32 bit mode).
Anyone have a work around for this or suggestions where to look/try? I was
having a similar problem with Curl, but once I told curl where the
it by adding disks and not have to move home directories to
different file systems, etc...
_
From: Derek Ragona [mailto:[EMAIL PROTECTED]
Sent: Saturday, October 06, 2007 2:14 PM
To: Don O'Neil; freebsd-questions@freebsd.org
Subject: Re: Building a SAN using FreeBSD
At 04:00 PM 10/6/2007, Don
agents will there-
fore work automatically.
If no port 25 listener is available, but your fetchmail configuration
was told about a reliable local MDA, it will use that MDA for local
delivery instead.
/quote
$ man fetchmail
Regards,
--
Don Read
/files/patch-configure
Edit ports/print/cups-base/pkg-plist
localhost.root#
Regards,
--
Don Read [EMAIL PROTECTED]
-- It's always darkest before the dawn. So if you are going to
steal the neighbor's newspaper, that's the time to do
I have an array that has a drive that keeps timing out/failing... So I need
to replace it. However, I want to stress test/burn in a replacement disk
first.
What is the best way to do this?
___
freebsd-questions@freebsd.org mailing list
I have an array that has a drive that keeps timing out/failing... So I need
to replace it. However, I want to stress test/burn in a replacement disk
first.
What is the best way to do this?
___
freebsd-questions@freebsd.org mailing list
Is the LSI SAS 1068 controller (non-RAID) supported (it is used in the
Dell 5/i integrated SAS on the PowerEdge 2950)? If so, what driver?
Thanks.
--
F. Donelson Smith (Don) (919) 962-1884
Research Professor [EMAIL PROTECTED]
Department
' force flag as in:
pkg_delete -f libgda2-1.2.4_1,1'
Regards,
--
Don Read [EMAIL PROTECTED]
-- It's always darkest before the dawn. So if you are going to
steal the neighbor's newspaper, that's the time to do
On Wed, 12 Sep 2007 17:51:23 +0800 Erich Dollansky said:
Hi,
checked. It is readable by all.
I agree. It is something stupid like.
Try to delete and re-type it. I got stung by a non-printing
character once ...
Regards,
--
Don Read [EMAIL PROTECTED
I have a very strange access problem that just popped up this morning. For
whatever reason, my machine at home over my cable modem can no longer access
Apache on port 80... However other services are accessible elsewhere (Direct
Admin control panel, FTP, SMTP,etc...) BUT Apache is accessible to
That is interesting, we are using filters. What version ot Apache are you
running?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Gert Lynge
Sent: Wednesday, August 29, 2007 2:16 AM
To: freebsd-questions@freebsd.org
Subject: RE: Server rebooting itself
We tried that, 2 different PS's and no change, so I don't think that is what
it is.
I'm thinking its either a BIOS issue, or _maybe_ memory. There may be 1 bad
cell somewhere in RAM that gets randomly hit and causes a reset. I'm going
to try upgrading the BIOS, and then if that doesn't work, put
@freebsd.org
Subject: Re: Server rebooting itself
Don O'Neil wrote:
Don,
This happens randomly every 3-20 days (no apparent pattern).
Any suggestions on what to check next?
As other wrote: it can be anything. I had a similair problem and it almost
drove me mad. It was a webhosting machine running 5.4
I have a 6.1 machine (AMD X2-5200) that reboots itself from time to time for
no apparent reason. Today, I caught it in a reboot and on the console it
said it was shutting down the CPU's, like someone had hit control-alt-delete
on it (the same message)... But there is no keyboard attached to it,
I have a 6.1 machine (AMD X2-5200) that reboots itself from time to time for
no apparent reason. Today, I caught it in a reboot and on the console it
said it was shutting down the CPU's, like someone had hit control-alt-delete
on it (the same message)... But there is no keyboard attached to it,
Hi Adam:
Adam J Richardson writes:
Don Hinton wrote:
Could someone recommend a good (and
cheap) one that's includes a/b/g*/n and is supported, either natively
or via ndis?
Hi Don,
I can heartily recommend any card based on the TNET1130 chipset. They
work very well
access, I've decided to pick up a temporary PCMCIA
wireless card in the meantime. Could someone recommend a good (and
cheap) one that's includes a/b/g*/n and is supported, either natively
or via ndis?
thanks in advance...
don
___
freebsd-questions
bar
$ ./bar
my name is: ./bar
hth...
don
I'm just curious.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
--
Don Hinton don.hinton
/cgi/cvsweb.cgi/src/usr.sbin/mailwrapper/mailwrapper.c?rev=1.11;content-type=text%2Fplain
hth...
don
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL
[0]. And so sendmail behaves as if it had been
invoked as mailq or whatever.
You're exactly right. I misread the man file and did a little test to confirm
it.
thanks...
don
--
Don Hinton don.hinton at vanderbilt.edu or hintonda at gmail.com
Institute for Software Integrated Systems (ISIS
}
cat test.sh | myloop
hth...
don
Robert Huff
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
[EMAIL PROTECTED]
--
Don
out of range field -1
input record number 1, file user.csv
source line number 1
Obviously $(NF-1) doesn't do the trick. Any better idea?
Hmmm, works for me it does...
Me too, except of course if the first line of user.cvs is blank...
Peter
--
Don Hinton don.hinton
I've been getting these messages fairly regularly lately. We're running SA
3.1.8 and Exim 4.6.6 on FreeBSD 6.1. I've changed the exim-SA config to go
through a pipe rather than the traditional way, set it to only scan messages
100K, turned off Bayes AutoLearn because it was creating token files in
() the path, then pass the fd to getdirentries(), if it returns -1,
and errno = EINVAL, it's not a directory. (man getdirentries for more info)
hth...
don
Try opening the path in question for writing with open(2). If it returns
-1, and errno is EISDIR, it is a directory
I'm having a problem with quotacheck failing and giving this message:
quotacheck: /home/quota.user: seek failed: Invalid argument THE FOLLOWING
FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY:
/dev/twed0s1d (/home)
However, I have run a full fsck from single user mode on this volume and it
I'm having a problem with quotacheck failing and giving this message:
quotacheck: /home/quota.user: seek failed: Invalid argument THE FOLLOWING
FILE SYSTEM HAD AN UNEXPECTED INCONSISTENCY:
/dev/twed0s1d (/home)
However, I have run a full fsck from single user mode on this volume and it
I just built a new server with an Athlon 64 x2, 4GB Ram and a
Gigabyte/Nvidia motherboard.
When I boot the system up it says on the console that 532888K will be
ignored.
Of course it isn't put in any of the log files. Dmesg shows this:
real memory = 3724476416 (3551 MB)
avail memory =
Message-
From: Bill Moran [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 24, 2007 11:05 AM
To: Don O'Neil
Cc: freebsd-questions@freebsd.org
Subject: Re: Memory 3.5GB not used?
In response to Don O'Neil [EMAIL PROTECTED]:
I just built a new server with an Athlon 64 x2, 4GB Ram and a
Gigabyte
I never had this problem before when I built the kernel the first time.
Could my module source be corrupt? If so, how do I re-install just the
kernel sources for 6.1?
-Original Message-
From: Andy Greenwood [mailto:[EMAIL PROTECTED]
Sent: Tuesday, April 24, 2007 11:44 AM
To: Don O'Neil
, 2007 11:55 AM
To: Don O'Neil
Cc: 'Andy Greenwood'; freebsd-questions@freebsd.org
Subject: Re: Memory 3.5GB not used?
In response to Don O'Neil [EMAIL PROTECTED]:
I never had this problem before when I built the kernel the first time.
Could my module source be corrupt? If so, how do I re-install
I had a crash on a disk array last week that was severe enough that fsck
wouldn't fix it, even in single user mode. So, I was forced to suck off the
good data, and restore the bad stuff from backups.
However there are 2 directories that contain files/directories which have
bogus user group ID's
I had a crash on a disk array last week that was severe enough that fsck
wouldn't fix it, even in single user mode. So, I was forced to suck off the
good data, and restore the bad stuff from backups.
However there are 2 directories that contain files/directories which have
bogus user group ID's
This question is related to my recent question about not being able to
delete files after a disk crash... I solved that problem with the chflags
(the no-delete flag was set!).. Thanks for all who suggested it.
Now that I've deleted the files, I thought this problem would go away, but
its not:
Does anyone have a suggestion for a supported 10/100/1000 PCI Express x1
ethernet card supported under 6.1?
Thanks!
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail
Does anyone know how to get a nVidia GeForce 6100/430 Realtek 8211 Gig-E
interface to work on FreeBSD 6.1? Loading the standard nVidia lan drivers
doesn't work, nor does anything in the generic kernel. Is there a
patch/driver for this device? The MB is a Gigabyte M61P-S3.
Thanks!
I've currently got a production server in place that I want to do some
hardware upgrades on. We're currently running a Dual P3 1.4 GHz and I plan
on replacing it with an AMD X2-5200+ cpu/mb.
Now.. Can I just use the same SMP kernel I have currently (assuming the
correct drivers are loaded) for
1 - 100 of 320 matches
Mail list logo
