Limiting closed port RST
Hello, I've started an Apache bechmark with ab today and a lot of such messages from kernel appeared in /var/log/messages: Sep 25 16:16:34 dev01 kernel: Limiting closed port RST response from 270 to 200 packets/sec Sep 25 16:19:10 dev01 kernel: Limiting closed port RST response from 475 to 200 packets/sec Sep 25 16:19:15 dev01 kernel: Limiting closed port RST response from 220 to 200 packets/sec Sep 25 16:19:19 dev01 kernel: Limiting closed port RST response from 243 to 200 packets/sec What do they mean? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
freebsd-update
Hello, I've run today "freebsd-update fetch" and it found some updates, including /boot/kernel/kernel: The following files will be updated as part of updating to 7.0-RELEASE-p4: /boot/kernel/kernel /boot/kernel/kernel.symbols /usr/src/sys/amd64/amd64/exception.S /usr/src/sys/conf/newvers.sh /usr/src/sys/kern/vfs_mount.c /usr/src/sys/netinet6/icmp6.c Then I ran "freebsd-update install" # freebsd-update install Installing updates... done. I guess this does not update my running kernel and I have to reboot to really update it. Right? Or is there any way to do this without reboot? O course I doubt it but I'd like to make sure I'm not missing some magic feature... :-). Thanks! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: Google Chrome
On Wed, Sep 3, 2008 at 12:14 AM, Beech Rintoul <[EMAIL PROTECTED]> wrote: > On Tuesday 02 September 2008, Vlad GURDIGA said: >> Hello, >> >> In Google Chrome System requirements >> (http://www.google.com/support/chrome/bin/answer.py?answer=95411&to >>pic=14660) they say that a Linux version is going to appear. And in >> the "Download and install" help article >> (http://www.google.com/support/chrome/bin/answer.py?answer=95346&qu >>ery=open-source&topic=&type=) they say that it is open-source. >> >> Does this mean that is hope we'll have a FreeBSD version? > > If someone steps up and rolls and submits the port. You're welcome to > volunteer :-) I'd be glad to, but I'm afraid I do not have the skills for that... :-( ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Google Chrome
Hello, In Google Chrome System requirements (http://www.google.com/support/chrome/bin/answer.py?answer=95411&topic=14660) they say that a Linux version is going to appear. And in the "Download and install" help article (http://www.google.com/support/chrome/bin/answer.py?answer=95346&query=open-source&topic=&type=) they say that it is open-source. Does this mean that is hope we'll have a FreeBSD version? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: fs cache
On 22/06/07, Nikos Vassiliadis <[EMAIL PROTECTED]> wrote: On Friday 22 June 2007 14:23, Vlad GURDIGA wrote: > I'm afraid my background in this area is too thin to go that far... -CURRENT is for developers or users who want to contribute in the development process of FreeBSD. And as Noberto said, there is a lot of debugging info enabled, which make debugging possible, but hurt performance greatly. http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/current-stable.html#CURRENT > I apologize for the noise. No worries, just download and install 6.2-RELEASE. I'd love to but some of my hardware is not supported by 6.2. Audio chipset Sigmatel 9221 is not supported. My SATA controller had an issue on 6.2 (I wrote about that on the list: http://lists.freebsd.org/pipermail/freebsd-questions/2007-March/145701.html) and in the end I was advised to try -CURRENT. This is whar I did and was happy for a while. Sound and HDD are working perfectly, and performance is OK even with the debugging options enabled in kernel. But now I am left without OpenOffice (yes, there is another current thread here). I Guess it's time to switch to Google Docs for a while, until 7-RELEASE is out.. ;-) Thanks for comments. http://www.freebsd.org/releases/6.2R/announce.html or a snapshot of 6-STABLE, which is updated in a slow pace, for fixes or security holes. http://www.freebsd.org/snapshots/ Releases are considered to be the most stable. Install 6.2-RELEASE and if you feel like updating you can use freebsd-update. Keep in mind that all these new, old, released or other, are relative to the operating system itself and not the third party programs(packages, ports) you'll be using(GNOME, firefox, etc). Ports are not branched and same versions are used in all branches... So, running a supported release does not mean, that you have to run legacy packages. HTH, Nikos ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: fs cache
On 22/06/07, Norberto Meijome <[EMAIL PROTECTED]> wrote:
On Thu, 21 Jun 2007 22:50:25 +0300
"Vlad GURDIGA" <[EMAIL PROTECTED]> wrote:
> On 18/06/07, Norberto Meijome <[EMAIL PROTECTED]> wrote:
> > On Sun, 17 Jun 2007 10:24:21 +0300
> > "Vlad GURDIGA" <[EMAIL PROTECTED]> wrote:
> >
> > > I have FreeBSD 7-CURRENT and Ubuntu on the same computer but Firefox
> > > takes twice as long to start on a fresh boot.
> >
> > If you are using the default CURRENT kernel config, it has several options
enabled to debug kernel and trace issues. This will slow down your system, although I
am not sure whether this is actually your problem. You should try -STABLE.
> >
> > you may want to compare the output of strace or similar to see where the
time is spent.
>
> It looks like strace does not run on 7-CURRENT:
> kpax# strace firefox
> strace: open("/proc/...", ...): No such file or directory
(please keep the list in CC)
mount /proc maybe?
you can always use ktrace
I'm afraid my background in this area is too thin to go that far...
I apologize for the noise.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
OpenOffice.org on 7-CURRENT
Hello, I have recently tried packaged version 2.2, 2.1 and 2.0 (from ftp://ooopackages.good-day.net) and the editors/openoffice.org-2-devel port but none of them worked. The packaged versions core dump with many error mesages like these: kpax# openoffice.org-SRC680_m200-swriter Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 0) Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 701599904) . Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 701599904) FSegmentation fault (core dumped) kpax# kpax# openoffice.org-2.1.0-swriter Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 697517616) Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 697517616) .. /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 642) Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 642) Fatal error 'Exceeded maximum lock level' Segmentation fault (core dumped) kpax# kpax# openoffice.org-2.2.0-swriter Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 701428164) ... Fatal error 'Exceeded maximum lock level' at line 201 in file /usr/src/lib/libpthread/thread/thr_rtld.c (errno = 701428164) Segmentation fault (core dumped) kpax# and the version built from port core dumped with no error messages. The kernel is built from 7-CURRENT updated src and ports are up to date too. What else should I try? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
fs cache
Hello, I have FreeBSD 7-CURRENT and Ubuntu on the same computer but Firefox takes twice as long to start on a fresh boot. I've run some simple tests: - on FreeBSD it takes about 7 seconds on the first start and about 3 on subsequent startups; - on Ubuntu it takes about 3 seconds on the first start and about 1 on subsequent startups; The only difference I can see is that on Ubuntu, after first start of Firefox the memory use for cache is 22% vs. 0% on FreeBSD. My guess is that this is the cause of slower startups on FreeBSD. My question is: can I tune UFS2 in such a way that the most frequently used desktop applications would remain for a longer time in disk cache? In both cases I use GNOME 2.18, GNOME System Monitor 2.18, and Firefox 2. Both FreeBSD 7-CURRENT (src and ports tree) and Ubuntu 7.01 (2.6.20-16-generic kernel) are up to date. Both are SMP and 32bit. Here is the system configuration: - Intel DP965LT mother-board; - dual-core Pentium D 820; - 1GB of dual-channel-enabled DDR2 PC5300 at 667 MHz; - Seagate, BARRACUDA 7200.7 Plus, 160GB, ST3160827AS, 8M cache, cu NCQ; As far as I know, FreeBSD does not have support for NCQ, and I do not know about Ubuntu. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: pf(4) + fetch(1) + http://ftp.gnu.org
On 15/06/07, Chuck Swiger <[EMAIL PROTECTED]> wrote: On Jun 14, 2007, at 2:24 PM, Vlad GURDIGA wrote: >> Presumably you want to make sure that fetch(1) is using: >> >> FTP_PASSIVE_MODEIf set to anything but `no', forces the FTP >> code to >> use passive mode. > > Just in case, I have checked my environment and FTP_PASSIVE_MODE is > set to "yes". I'm saying "just in case" because the downloads were > from "http://ftp.gnu.org";, not from "ftp://ftp.gnu.org";, I mean the > HTTP protocol was used, not FTP. Hrm, missed that part, or perhaps just ran with the ftp.gnu.org hostname implying FTP access. :-) I might watch out for the "no-df" entry to your scrub line, as it is probably breaking PMTUd: I thought about it too and ran a test with that line commented out, but it did not help. http://en.wikipedia.org/wiki/Path_MTU_discovery -- -Chuck ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
pf(4) + fetch(1) + http://ftp.gnu.org
Hello,
There is one strange thing going on with this combination. I saw this
many times by now: when fetch(1) is trying to download something from
http://ftp.gnu.org, it is hanging after a very small amount of data;
sometimes on 0%. After disabling pf(4), fetch(1) is not hanging any
more, so I guess that the problem is somewhere in my pf.conf. Here is
it:
pf.conf -- begin ---
ext_if = "em0"
icmp_types="echoreq"
# don't filter on the loopback interface
set skip on lo0
set block-policy return
scrub all no-df random-id reassemble tcp
# setup a default deny policy
block all
# activate spoofing protection for the internal interface.
antispoof quick for lo0 inet
# pass tcp, udp, and icmp out on the external (Internet) interface.
# keep state on udp and icmp and modulate state on tcp.
pass in on $ext_if proto tcp from any to $ext_if port 65522 keep state
pass in inet proto icmp all icmp-type $icmp_types keep state
pass out on $ext_if proto tcp all modulate state flags S/SA
pass out on $ext_if proto {udp, icmp} all keep state
pf.conf -- end ---
Any idea what's wrong here?
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Fwd: Installing FreeBSD on large disk >2TB
-- Forwarded message -- From: Francisco Reyes <[EMAIL PROTECTED]> Date: 13-Jun-2007 03:42 Subject: Re: Installing FreeBSD on large disk >2TB To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED], Enrique Ayesta Perojo <[EMAIL PROTECTED]>, Kris Kennaway <[EMAIL PROTECTED]> There is a simmilar thread related to filesystems greater than 2TB. The subject is: Filesystems larger than 2TB I started the thread and from what I can gather you can not have a filesystem greater than 2TB on your boot device. Also you can not use sysinstall to create the partition if it is greater than 2TB. The problem happens when i try to use a RAID larger in size to 2 Terabyte, then the install program freezes and the machine reboots (it cannot find the disk). Split your drives. Make a RAID1 with 2 drives and install / /usr /var /tmp swap The second raid with the rest of the drives you should be able to create the partition manually, not from sysinstall. Any clue on how to solve it? FreeBSD can't be installed on disks larger than 2 TB? As far as I can tell no. As for creating the partition after you have a working system there were two methods mentioned. Was was using newfs against the raw device like newfs -s /dev/da0s2 The other one involves something called GPT, but seems like it is a more difficult method and it also seems like there is ongoing discussion about GPT. I also think, but am not sure, that it will be easier to have partitions greater than 2TB when ZFS is incorporated into the OS. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Fwd: Fwd: Installing FreeBSD on large disk >2TB
-- Forwarded message -- From: Kirk McKusick <[EMAIL PROTECTED]> Date: 12-Jun-2007 16:49 Subject: Re: Fwd: Installing FreeBSD on large disk >2TB To: Vlad GURDIGA <[EMAIL PROTECTED]> Cc: [EMAIL PROTECTED], Kris Kennaway <[EMAIL PROTECTED]>, Enrique Ayesta Perojo <[EMAIL PROTECTED]> I believe that there are some limitations on booting FreeBSD from filesystems bigger than 2Tb, but I know of no limitations on building non-root filesystems bigger than 2Tb. I have copied Kris Kennaway and the FreeBSD filesystem mailing list in the hope that someone can give a more precise answer than me. Kirk McKusick -- Forwarded message -- Date: Mon, 11 Jun 2007 17:16:45 +0300 From: "Vlad GURDIGA" <[EMAIL PROTECTED]> To: [EMAIL PROTECTED] Subject: Fwd: Installing FreeBSD on large disk >2TB X-ASK-Info: Message Queued (2007/06/11 07:17:40) X-ASK-Info: Confirmed by User (2007/06/11 07:20:20) Hello, Wikipedia says that you contributed to development of FFS and I thought you might give a sure answer to a question about it. These days I saw a question on freebsd-questions mailing list that was left without a solution till now [see below]. Is there any chance that FFS can be extended to handle larger disks? Best regards. -- Forwarded message -- From: Enrique Ayesta Perojo <[EMAIL PROTECTED]> Date: 11-Jun-2007 11:13 Subject: Installing FreeBSD on large disk >2TB To: freebsd-questions@freebsd.org Hello I'm trying to install FreeBSD 6.2 on a HP DL320s. This server has a P400 RAID controller with 12 SATA disk drives attached to it. The RAID controller is supported in FreeBSD through the ciss driver. The problem happens when i try to use a RAID larger in size to 2 Terabyte, then the install program freezes and the machine reboots (it cannot find the disk). If the array is smaller than 2 Terabytes then there is no problem, the controller detects the disk and i can install FreeBSD on it. I have tried with i386 and AMD64 versions (the server has a Xeon processor supported by AMD64) Any clue on how to solve it? FreeBSD can't be installed on disks larger than 2 TB? Thanks ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]" ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Bery does not work on FreeBSD 7-CURRENT
Hello, I've installed beryl today (tried both: from packages and compiled from updated ports) on a FreeBSD 7-CURRENT. When I run beryl from console I get this: # beryl Something went wrong with Xgl detection. Something went wrong with Nvidia detection.Something went wrong with system check. When I run beryl-manager I get this: # beryl-manager # glxinfo: not found ** (beryl-manager:95111): WARNING **: No pidof, this may not work right. ** (beryl-manager:95111): WARNING **: No pidof, this may not work right. ** (beryl-manager:95111): WARNING **: No pidof, this may not work right. ** (beryl-manager:95111): WARNING **: No pidof, this may not work right. The red diamond on beryl manager apears in the upper notification area of GNOME desktop, but when I try to select the beryl window manager from it's contextual menu, there is a flicker and in less than a second everything is beck to normal look. When I run beryl-settings I get this: # beryl-settings Traceback (most recent call last): File "/usr/local/bin/beryl-settings", line 22, in ? --- endless pause -- ^CFatal error 'Thread is not system scope. ' at line 316 in file /usr/src/lib/libpthread/thread/thr_sig.c (errno = 2) Abort Do I miss a package or something? Or it is just because of the development version on FreeBSD? Or maybe it is because of my ATI Radeon videocard? The Xorg 7.2 and xf86-video-ati-6.6.3_2 were installed by the book (/usr/port/UPDATING) and work fine. Here is my uname -a: # uname -a FreeBSD kpax 7.0-CURRENT FreeBSD 7.0-CURRENT #3: Mon Jun 4 00:03:11 EEST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
X.org 7.2 keyboard layout switching does not work
Hello! After upgrading to Xorg 7.2 "by the book" (/usr/ports/UPDATING), I could not switch my keyboard layouts as I did with the previous version. Even more, I could not switch to text-mode console using Ctrl-Alt-F1. After I've regenerated a new xorg.conf using "Xorg -configure", I was able to switch to text-mode console, but after adding the two lines for keyboard layout switch (from my old xorg.conf): Option "XkbLayout" "us,ro" Option "XKbOptions" "grp:alt_shift_toggle" Ctrl-Alt-F1 stopped working and the keyboard layout switching did not work. Google gave me some hints from the Gentoo documentation site regarding the imposibility to switch to text-mode console, but the solutions provided there did not work for me. Are there any substantial changes in the way that keyboard layout switching works in X.org 7.2 vs. 6.9? # uname -a FreeBSD kpax 7.0-CURRENT FreeBSD 7.0-CURRENT #2: Sat Jun 2 20:00:40 EEST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/GENERIC i386 ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Registering installation for...
Hello, "Registering installation for mplayer-0.99.10_9" took about 8 minutes (at 97% CPU-core load) of CPU time on one of the two cores on my Pentium D 820 on a system with 1 GiB of RAM and Barracuda SATA drive. It looks "a little" too long to me... Is it OK that pkg_create takes so long so much of CPU? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Undetected DVD-RW
Hello, My FreeBSD 6.2-STABLE does not recognize the Marvell Technology Group Ltd. 88SE6101 single-port PATA133 interface on which is attached the DVD-RW. As a result (I guess...), I do not have a /dev/acd0 with a GENERIC SMP kernel. The [verbose] dmesg snippet looks like this: found-> vendor=0x11ab, dev=0x6101, revid=0xb1 bus=3, slot=0, func=0 class=01-01-8f, hdrtype=0x00, mfdev=0 cmdreg=0x0007, statreg=0x0010, cachelnsz=16 (dwords) lattimer=0x00 (0 ns), mingnt=0x00 (0 ns), maxlat=0x00 (0 ns) intpin=a, irq=10 powerspec 2 supports D0 D1 D3 current D0 MSI supports 1 message map[10]: type 4, range 32, base 1018, size 3, enabled Is it OK to submit a problem report on this issue or there is something I can do myself to get my DVD-RW working under FreeBSD? # uname -a FreeBSD kpax 6.2-STABLE FreeBSD 6.2-STABLE #0: Tue Apr 10 22:56:51 EEST 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/kpax i386 The motherboard is a Intel Desktop Board DP965LT. ___ [EMAIL PROTECTED] mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: IRQ storm
On 28/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote: Vlad GURDIGA wrote: > On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote: >> Vlad GURDIGA wrote: >> > On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote: >> >> Vlad GURDIGA wrote: >> >> > On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote: >> >> >> Vlad GURDIGA wrote: >> >> >> > After running this: >> >> >> > >> >> >> > /sbin/atacontrol reinit ata2 >> >> >> > >> >> >> > the storm was gone. >> >> >> > My HDD in on ata4: >> >> >> > >> >> >> > #atacontrol info ata4 >> >> >> > Master: ad8 Serial ATA II >> >> >> > Slave: no device present >> >> >> > >> >> >> > >> >> >> > Why? >> >> >> > >> >> >> >> >> >> Could be one of any number of reasons and my guess is that the >> drive >> >> >> wants to enter sleep mode, due to overheating or energy saving. And >> >> >> either controller, driver or both found it unreasonable. >> >> > >> >> > You can see the brand and model of my drive. I have Windows XP on >> the >> >> > same computer which works fine. Would the drive want to enter sleep >> >> > mode only under FreeBSD? >> >> >> >> Depends on your workload. Perhaps you do something under FreeBSD that >> >> generates more heat? >> > >> > There is no workload: the storm is there right from the boot of OS. >> > >> >> >> >> >> >> >> Perhaps you could inform us after you have researched it? >> >> > >> >> > I do not have a plain idea about what I could or should research in >> >> > this case... Could you please be morespecific? >> >> >> >> I would start with the name of the SATA controller and drive and see >> >> whether someone else has had the same problems (search archives and >> >> google). Then i'd probably check temperatures, chipsets, try -CURRENT >> >> (for driver updates to see whether that fixes it) and go from there. >> > >> > OK, I'll try. >> > >> >> See if you can identify a condition that triggers the IRQ storm. >> > >> > As I said, there is no special condition: the storm is there right >> > from the boot of OS. >> > >> >> It doesn't need to be a "special condition" to be a condition. >> By your description it sounds to me like a problem caused by improper >> initialization in BIOS but that Windows Drivers "fix", perhaps you need >> to see if you can upgrade BIOS and SATA controller firmware. > > I updated BIOS right after the instalation: it means about a week or > two ago. I guess the SATA firmware is included. > What are your other options? This is what I'm trying to find out here. :) ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: IRQ storm
On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote: Vlad GURDIGA wrote: > After running this: > > /sbin/atacontrol reinit ata2 > > the storm was gone. > My HDD in on ata4: > > #atacontrol info ata4 > Master: ad8 Serial ATA II > Slave: no device present > > > Why? > Could be one of any number of reasons and my guess is that the drive wants to enter sleep mode, due to overheating or energy saving. And either controller, driver or both found it unreasonable. You can see the brand and model of my drive. I have Windows XP on the same computer which works fine. Would the drive want to enter sleep mode only under FreeBSD? Perhaps you could inform us after you have researched it? I do not have a plain idea about what I could or should research in this case... Could you please be morespecific? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: IRQ storm
After running this: /sbin/atacontrol reinit ata2 the storm was gone. My HDD in on ata4: #atacontrol info ata4 Master: ad8 Serial ATA II Slave: no device present Why? On 25/03/07, Vlad GURDIGA <[EMAIL PROTECTED]> wrote: On 25/03/07, Josh Carroll <[EMAIL PROTECTED]> wrote: > > I've changed motherboard recently (now it is Intel DP965LT) and now I > > have my PC slowed down considerably. vmstat -i shows a huge amount of > > interrupts on irq17: atapci0: > > Do you have atapicam enabled or being loaded as a module? No, I do not have atapicam enabled. Here is my kldstat output: Id Refs AddressSize Name 1 14 0xc040 3703a4 kernel 21 0xc0771000 6ea8 linprocfs.ko 32 0xc0778000 1adb8linux.ko 41 0xc0793000 2364 accf_http.ko 51 0xc0796000 aa74 cpufreq.ko 61 0xc07a1000 59a50acpi.ko 71 0xc4a7a000 3000 pflog.ko 81 0xc4a7d000 2d000pf.ko I've checked my kernel configuration file and I do not have it there either. What else should I check? > If so, I > have the same problem, which is currently being tracked in this PR: > > http://www.freebsd.org/cgi/query-pr.cgi?pr=103602 > > A workaround, if you don't need/want to burn cds/dvds is to remove > atapicam or don't load the module at boot time. > > Thanks, > Josh > ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Re: IRQ storm
On 25/03/07, Josh Carroll <[EMAIL PROTECTED]> wrote: > I've changed motherboard recently (now it is Intel DP965LT) and now I > have my PC slowed down considerably. vmstat -i shows a huge amount of > interrupts on irq17: atapci0: Do you have atapicam enabled or being loaded as a module? No, I do not have atapicam enabled. Here is my kldstat output: Id Refs AddressSize Name 1 14 0xc040 3703a4 kernel 21 0xc0771000 6ea8 linprocfs.ko 32 0xc0778000 1adb8linux.ko 41 0xc0793000 2364 accf_http.ko 51 0xc0796000 aa74 cpufreq.ko 61 0xc07a1000 59a50acpi.ko 71 0xc4a7a000 3000 pflog.ko 81 0xc4a7d000 2d000pf.ko I've checked my kernel configuration file and I do not have it there either. What else should I check? If so, I have the same problem, which is currently being tracked in this PR: http://www.freebsd.org/cgi/query-pr.cgi?pr=103602 A workaround, if you don't need/want to burn cds/dvds is to remove atapicam or don't load the module at boot time. Thanks, Josh ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
IRQ storm
Hello, I've changed motherboard recently (now it is Intel DP965LT) and now I have my PC slowed down considerably. vmstat -i shows a huge amount of interrupts on irq17: atapci0: interrupt total rate irq1: atkbd0 12535 4 irq12: psm0 9410 3 irq17: atapci0 189627864 61507 irq19: atapci1+ 391391126 irq20: em0 29076 9 irq22: pcm020557 6 cpu0: timer 6133486 1989 cpu1: timer 6133460 1989 Total 202357779 65636 Since this problem came, my Xorg stopped seeing my PCIE video card. I guess these two could be related. I've tried to boot in safe mode and with ACPI disabled but the problem persists. I've rebuild the kernel with minimal set of options and devices, but it did not help. I've disabled all non-vital devices from BIOS, tried to put my SATA drive in Native and legacy modes, tried with S.M.A.R.T. disabled, disabled USB, FireWire, NIC, serial and parallel ports, floppy controller, but nothing helped. What else should I try? I've attached my dmesg output (with boot_verbose="YES" in loader.conf, that's why it is so large) Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Sat Mar 24 09:35:30 EET 2007 [EMAIL PROTECTED]:/usr/obj/usr/src/sys/kpax WARNING: MPSAFE network stack disabled, expect reduced performance. Preloaded elf kernel "/boot/kernel/kernel" at 0xc0796000. Preloaded elf module "/boot/kernel/acpi.ko" at 0xc07961ec. Calibrating clock(s) ... i8254 clock: 1190766 Hz CLK_USE_I8254_CALIBRATION not specified - using default frequency Timecounter "i8254" frequency 1193182 Hz quality 0 Calibrating TSC clock ... TSC clock: 2802815953 Hz CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2802.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf44 Stepping = 4 Features=0xbfebfbff Features2=0x641d> AMD Features=0x2010 Cores per package: 2 real memory = 1055580160 (1006 MB) Physical memory chunk(s): 0x1000 - 0x0008dfff, 577536 bytes (141 pages) 0x0010 - 0x003f, 3145728 bytes (768 pages) 0x00828000 - 0x3cce3fff, 1011597312 bytes (246972 pages) 0x3df5 - 0x3edfafff, 15380480 bytes (3755 pages) 0x3ee07000 - 0x3ee9dfff, 618496 bytes (151 pages) avail memory = 1027379200 (979 MB) MP Configuration Table version 1.4 found at 0xc00fe670 Table 'FACP' at 0x3eefc000 Table 'APIC' at 0x3eef6000 MADT: Found table at 0x3eef6000 APIC: Using the MADT enumerator. MADT: Found CPU APIC ID 0 ACPI ID 1: enabled SMP: Added CPU 0 (AP) MADT: Found CPU APIC ID 1 ACPI ID 2: enabled SMP: Added CPU 1 (AP) MADT: Found CPU APIC ID 130 ACPI ID 3: disabled MADT: Found CPU APIC ID 131 ACPI ID 4: disabled INTR: Adding local APIC 0 as a target ACPI APIC Table: INTR: Adding local APIC 1 as a target FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 pnpbios: Found PnP BIOS data at 0xc00fe0e0 pnpbios: Entry = f:b07f Rev = 1.0 pnpbios: OEM ID 8224744e Other BIOS signatures found: APIC: CPU 0 has ACPI ID 1 APIC: CPU 1 has ACPI ID 2 MADT: Found IO APIC ID 2, Interrupt 0 at 0xfec0 ioapic0: Changing APIC ID to 2 ioapic0: Routing external 8259A's -> intpin 0 MADT: Interrupt override: source 0, irq 2 ioapic0: Routing IRQ 0 -> intpin 2 MADT: Interrupt override: source 9, irq 9 ioapic0: intpin 9 trigger: level lapic0: Routing NMI -> LINT1 lapic1: Routing NMI -> LINT1 ioapic0 irqs 0-23 on motherboard cpu0 BSP: ID: 0x VER: 0x00050014 LDR: 0x DFR: 0x lint0: 0x00010700 lint1: 0x0400 TPR: 0x SVR: 0x01ff timer: 0x000100ef therm: 0x0001 err: 0x0001 pcm: 0x0001 mem: Pentium Pro MTRR support enabled null: io: random: npx0: INT 16 interface acpi0: on motherboard ioapic0: routing intpin 9 (ISA IRQ 9) to vector 48 acpi0: [MPSAFE] pci_open(1):mode 1 addr port (0x0cf8) is 0x8000fa18 pci_open(1a): mode1res=0x8000 (0x8000) pci_cfgcheck: device 0 [class=06] [hdr=00] is there (id=29a08086) pcibios: No call entry point acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 31 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi0: Power Button (fixed) acpi0: wakeup code va 0xd862f000 pa 0x8d000 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0 acpi_bus_number: root bus has no _BBN, assuming 0 AcpiOsDerivePciId: bus 0 dev 0 func 0
Fwd: pause before "Trying to mount root from ufs:"
Hello, Very glad to be back with a a solution to my earlier problem: the key was the SCSI_DELAY option in kernel: I've change it from the default 5000 to 500 (I guess milliseconds) and now th delay before "Trying to mount root from ufs" is gone. The way to solution was not very smart but simple, and I'm going to tell it because it may help with other troubles too: I tried to boot with a 6.0-RELEASE but the delay was still there, then I tried to boot from a 5.4-RELEASE boot CD and it went smooth! No delay! A diff between output of sysctl -a on both versions revealed a possible difference: the sysctl kern.cam.scsi_delay variable is not present on 5.4-RELEASE (GENERIC) at all. There is also a chapter in handbook about this: http://graphics.itb.ac.id/wnugroho/freebsd/handbook/configtuning-disk.html 11.12.1.6 SCSI_DELAY (kern.cam.scsi_delay). Have a nice day! -- Forwarded message ------ From: Vlad GURDIGA <[EMAIL PROTECTED]> Date: 15-Mar-2007 10:20 Subject: pause before "Trying to mount root from ufs:" To: freebsd-questions@freebsd.org Hello, My motherboard Intel D955XBK died these day, I took it to service center and they gave me a new one of another model: DP965LT. On my home computer I have dual boot with Windows XP and FreeBSD 6.2-STABLE. I've expected Windows XP not to boot at all after the change, but fortunately it successfully came up, found all new component and everything went smooth. What I did not expect at all is that FreeBSD showed some problems: there is a short pause on boot before (I've measured about 4 seconds) before "SMP: AP CPU #1 Launched!", and a long one (I've measured about 90 seconds!!!) between this message and "Trying to mount root from ufs:/dev/ad8s2a". Last night (14.03.2007) I've updated mys source tree (6.2-STABLE) an rebuilt the work and kernel hoping for salvation to come, but it did not. Rebuilt SMP-GENERIC but it did not help either. Another (bad) change that came with the motherboard change is that Xorg is hanging on start without any message. If I try to get back to console with Alt-Ctrl-FN, it beeps. Alt-Ctrl-Backspace does not work either. Keyboard is working: NumLock responds and fortunately Alt-Ctrl-Del works fine too, being the only way out of Xorg's hang. With the exception of motherboard nothing changed in hardware. What could be the cause? Here is the dmesg output. dmesg output start Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Wed Mar 14 23:33:20 EET 2007 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/kpax.smp WARNING: MPSAFE network stack disabled, expect reduced performance. ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2802.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf44 Stepping = 4 Features=0xbfebfbff Features2=0x641d> AMD Features=0x2010 Cores per package: 2 real memory = 1055305728 (1006 MB) avail memory = 1019219968 (972 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 p4tcc0: on cpu0 cpu1: on acpi0 p4tcc1: on cpu1 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 drm0: port 0x2000-0x20ff mem 0x4000-0x4fff,0x5021-0x5021 irq 16 at device 0.0 on pci1 info: [drm] Initialized radeon 1.25.0 20060524 pci1: at device 0.1 (no driver attached) pci0: at device 3.0 (no driver attached) em0: port 0x30c0-0x30df mem 0x5030-0x5031,0x50324000-0x50324fff irq 20 at device 25.0 on pci0 em0: Ethernet address: 00:19:d1:09:de:de em0: [GIANT-LOCKED] uhci0: port 0x30a0-0x30bf irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x3080-0x309f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0x50325400-0x503257ff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI r
pause before "Trying to mount root from ufs:"
Hello, My motherboard Intel D955XBK died these day, I took it to service center and they gave me a new one of another model: DP965LT. On my home computer I have dual boot with Windows XP and FreeBSD 6.2-STABLE. I've expected Windows XP not to boot at all after the change, but fortunately it successfully came up, found all new component and everything went smooth. What I did not expect at all is that FreeBSD showed some problems: there is a short pause on boot before (I've measured about 4 seconds) before "SMP: AP CPU #1 Launched!", and a long one (I've measured about 90 seconds!!!) between this message and "Trying to mount root from ufs:/dev/ad8s2a". Last night (14.03.2007) I've updated mys source tree (6.2-STABLE) an rebuilt the work and kernel hoping for salvation to come, but it did not. Rebuilt SMP-GENERIC but it did not help either. Another (bad) change that came with the motherboard change is that Xorg is hanging on start without any message. If I try to get back to console with Alt-Ctrl-FN, it beeps. Alt-Ctrl-Backspace does not work either. Keyboard is working: NumLock responds and fortunately Alt-Ctrl-Del works fine too, being the only way out of Xorg's hang. With the exception of motherboard nothing changed in hardware. What could be the cause? Here is the dmesg output. dmesg output start Copyright (c) 1992-2007 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD is a registered trademark of The FreeBSD Foundation. FreeBSD 6.2-STABLE #0: Wed Mar 14 23:33:20 EET 2007 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/kpax.smp WARNING: MPSAFE network stack disabled, expect reduced performance. ACPI APIC Table: Timecounter "i8254" frequency 1193182 Hz quality 0 CPU: Intel(R) Pentium(R) D CPU 2.80GHz (2802.82-MHz 686-class CPU) Origin = "GenuineIntel" Id = 0xf44 Stepping = 4 Features=0xbfebfbff Features2=0x641d> AMD Features=0x2010 Cores per package: 2 real memory = 1055305728 (1006 MB) avail memory = 1019219968 (972 MB) FreeBSD/SMP: Multiprocessor System Detected: 2 CPUs cpu0 (BSP): APIC ID: 0 cpu1 (AP): APIC ID: 1 ioapic0: Changing APIC ID to 2 ioapic0 irqs 0-23 on motherboard kbd1 at kbdmux0 ath_hal: 0.9.20.3 (AR5210, AR5211, AR5212, RF5111, RF5112, RF2413, RF5413) acpi0: on motherboard acpi0: Power Button (fixed) Timecounter "ACPI-fast" frequency 3579545 Hz quality 1000 acpi_timer0: <24-bit timer at 3.579545MHz> port 0x408-0x40b on acpi0 cpu0: on acpi0 p4tcc0: on cpu0 cpu1: on acpi0 p4tcc1: on cpu1 acpi_button0: on acpi0 pcib0: port 0xcf8-0xcff on acpi0 pci0: on pcib0 pcib1: at device 1.0 on pci0 pci1: on pcib1 drm0: port 0x2000-0x20ff mem 0x4000-0x4fff,0x5021-0x5021 irq 16 at device 0.0 on pci1 info: [drm] Initialized radeon 1.25.0 20060524 pci1: at device 0.1 (no driver attached) pci0: at device 3.0 (no driver attached) em0: port 0x30c0-0x30df mem 0x5030-0x5031,0x50324000-0x50324fff irq 20 at device 25.0 on pci0 em0: Ethernet address: 00:19:d1:09:de:de em0: [GIANT-LOCKED] uhci0: port 0x30a0-0x30bf irq 16 at device 26.0 on pci0 uhci0: [GIANT-LOCKED] usb0: on uhci0 usb0: USB revision 1.0 uhub0: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub0: 2 ports with 2 removable, self powered uhci1: port 0x3080-0x309f irq 21 at device 26.1 on pci0 uhci1: [GIANT-LOCKED] usb1: on uhci1 usb1: USB revision 1.0 uhub1: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub1: 2 ports with 2 removable, self powered ehci0: mem 0x50325400-0x503257ff irq 18 at device 26.7 on pci0 ehci0: [GIANT-LOCKED] usb2: EHCI version 1.0 usb2: companion controllers, 2 ports each: usb0 usb1 usb2: on ehci0 usb2: USB revision 2.0 uhub2: Intel EHCI root hub, class 9/0, rev 2.00/1.00, addr 1 uhub2: 4 ports with 4 removable, self powered pci0: at device 27.0 (no driver attached) pcib2: at device 28.0 on pci0 pci2: on pcib2 pcib3: at device 28.1 on pci0 pci3: on pcib3 atapci0: port 0x1018-0x101f,0x1024-0x1027,0x1010-0x1017,0x1020-0x1023,0x1000-0x100f mem 0x5010-0x501001ff irq 17 at device 0.0 on pci3 ata2: on atapci0 ata3: on atapci0 pcib4: at device 28.2 on pci0 pci4: on pcib4 pcib5: at device 28.3 on pci0 pci5: on pcib5 pcib6: at device 28.4 on pci0 pci6: on pcib6 uhci2: port 0x3060-0x307f irq 23 at device 29.0 on pci0 uhci2: [GIANT-LOCKED] usb3: on uhci2 usb3: USB revision 1.0 uhub3: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub3: 2 ports with 2 removable, self powered uhci3: port 0x3040-0x305f irq 19 at device 29.1 on pci0 uhci3: [GIANT-LOCKED] usb4: on uhci3 usb4: USB revision 1.0 uhub4: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub4: 2 ports with 2 removable, self powered uhci4: port 0x3020-0x303f irq 18 at device 29.2 on pci0 uhci4: [GIANT-LOCKED] usb5: on uhci4 usb5: USB revision 1.0 uhub5: Intel UHCI root hub, class 9/0, rev 1.00/1.00, addr 1 uhub5: 2 ports with 2
Re: bpf kernel module
On 12/11/06, Lowell Gilbert <[EMAIL PROTECTED]> wrote: "Vlad GURDIGA" <[EMAIL PROTECTED]> writes: > I'm trying to keep very close touch with 6.1_STABLE cvsupping sources > once a week or even more often. I'm thinking of removing as much as > possible devices from the kernel loading them from /boot/loader.conf > instead, so I could rebuild and install them without a whole > kernel/world rebuild and reboot when sources change. I'm not sure this > is a correct way, any piece of advice regarding this would be highly > appreciated. :) > > So, I've successfully done that with sound and network card drivers, > but did not succeed with removing bpf from the kernel. Booting a > kernel with no bpf support, and with > ng_bpf_load="YES" in my loader.conf, the pflogd fails to start with this error: > > Nov 11 20:22:33 uxterm pflogd[10251]: Failed to initialize: (no > devices found) /dev/bpf0: No such file or directory > Nov 11 20:22:33 uxterm pflogd[10251]: Exiting, init failure > > And, tcpdump also fails saying that "no suitable device found". Of > course there is no /dev/bpf0. > > Is there any way to have the bpf0 device without booting a kernel with > bpf device included? The kernel module *should* work. I suspect that there is an error message when it tries to load the module and fails. You could check for that error message, or try to load the module by hand and see if you get a clue to the problem. Here is how I did: commented out the "device bpf" line in the kernel, built and installed the kernel, and added ng_bpf_load="YES" in loader.conf. I guess this is the module for the bpf (is this correct? I'm not 100% sure). So, booting with the new kernel, and the module being loaded from the loader.conf, the pflogd fails to start with this error: Nov 11 20:22:33 uxterm pflogd[10251]: Failed to initialize: (no devices found) /dev/bpf0: No such file or directory Nov 11 20:22:33 uxterm pflogd[10251]: Exiting, init failure And, tcpdump also fails saying that "no suitable device found". Of course there is no /dev/bpf0. Unfortunately, I do not have enough experience to figure out how to load this device at runtime. Is there any solution to this situation? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
bpf kernel module
Hello, I'm trying to keep very close touch with 6.1_STABLE cvsupping sources once a week or even more often. I'm thinking of removing as much as possible devices from the kernel loading them from /boot/loader.conf instead, so I could rebuild and install them without a whole kernel/world rebuild and reboot when sources change. I'm not sure this is a correct way, any piece of advice regarding this would be highly appreciated. :) So, I've successfully done that with sound and network card drivers, but did not succeed with removing bpf from the kernel. Booting a kernel with no bpf support, and with ng_bpf_load="YES" in my loader.conf, the pflogd fails to start with this error: Nov 11 20:22:33 uxterm pflogd[10251]: Failed to initialize: (no devices found) /dev/bpf0: No such file or directory Nov 11 20:22:33 uxterm pflogd[10251]: Exiting, init failure And, tcpdump also fails saying that "no suitable device found". Of course there is no /dev/bpf0. Is there any way to have the bpf0 device without booting a kernel with bpf device included? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
src version
Hello, After I do a: bsd# cvsup ports-supfile I do a bsd# pkg_version -vol \< to see if any of my installed ports have newer versions. After I do a: bsd# cvsup stable-supfile is there any way to see the same information for the operating system on a i386 FreeBSD 6.1-STABLE, smp custom kernel? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
burncd: ioctl(CDRIOCNEXTWRITEABLEADDR): Input/output error
Hello, I get this error when I try to write (under root) a CD-RW or CD-R as is found in handbook: besa# burncd data FC-5-i386-disc1.iso fixate burncd: ioctl(CDRIOCNEXTWRITEABLEADDR): Input/output error Here are my (SMP) system details: besa# uname -a FreeBSD besa.org 6.1-STABLE FreeBSD 6.1-STABLE #24: Thu Jun 22 21:36:23 EEST 2006 [EMAIL PROTECTED]:/usr/src/sys/i386/compile/besa i386 besa# dmesg | grep acd acd0: DVDR at ata1-master UDMA66 acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 acd0: FAILURE - READ_TRACK_INFO ILLEGAL REQUEST asc=0x24 ascq=0x00 Is there any way to make it work? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
nat question
Hello, I could not figureout the answer to a question. Here is the situation: PC A: Windows XP Pro. PC B: FreeBSD 6.1, connected to internet, acting as a gateway for PC A, with NAT (built by hanbook instructions http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-natd.html), open firewall, no restrictions. For long time I have used the PC A with PC B as gateway and everything worked just fine, but now PC A can only ping any host (by IP) in Internet. No other traffic (DNS queries, FTP or HTTP) does not reach the Internet comming back with TTL exceeded response apparently from de destination host (I've seen this on PC B with Ethereal). Question: Is there any way my ISP can 'see' and cut out NATted traffic from PC A letting only the traffic from PC B pass?! How?! ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
Too many holes in the physical address space, giving up
Hello, I got 2x512 MB DDR2 (240) PC5300 667MHZ CL5.0 TWINMOS on an Intel D955XBK motherboard with dual channel, and every time on boot I see this message before the dmesg: FreeBSD/i386 bootstrap loader, Revision 1.1 ([EMAIL PROTECTED], Tue May 9 22:16:44 EEST 2006) Loading /boot/defaults/loader.conf /boot/kernel/kernel text=0x288938 data=0x325e0+0x2d4a8 syms=[0x4+0x3d430+0x4+0x4 dc34] / Hit [Enter] to boot immediately, or any other key for command prompt. Booting [/boot/kernel/kernel]... /boot/kernel/acpi.ko text=0x42ed4 data=0x2280+0x10f0 syms=[0x4+0x7ad0+0x4+0xa709 ] Too many holes in the physical address space, giving up Too many holes in the physical address space, giving up Too many holes in the physical address space, giving up Copyright (c) 1992-2006 The FreeBSD Project. Copyright (c) 1979, 1980, 1983, 1986, 1988, 1989, 1991, 1992, 1993, 1994 The Regents of the University of California. All rights reserved. FreeBSD 6.1-RC #3: Sun Apr 30 21:17:00 EEST 2006 ... Are the 4 messages about "Too many holes in the physical address space, giving up" telling that there is a problem? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD-multi-boot
Hello all, I have these slices on my HDD: - /dev/ad0s1 - Windows XP - /dev/ad0s2 - FreeBSD/i386 - /dev/ad0s3 - FreeBSD/amd64 and I want them all in my boot.ini. Till now I succeeded with FreeBSD/i386 (first did "dd if=/dev/ad0s2 of=boot.bsd bs=512 count=1" from FreeBSD/i386, then copied the resulted "boot.bsd" file to Windows C:\) I did the same trick with FreeBSD/amd64 (first did "dd if=/dev/ad0s3 of=boot64.bsd bs=512 count=1" from FreeBSD/amd64, then copied the resulted "boot64.bsd" file to Windows C:\) so, my boot.ini looks like this: ---cut here-- [boot loader] timeout=3 default=multi(0)disk(0)rdisk(0)partition(1)\WINDOWS [operating systems] multi(0)disk(0)rdisk(0)partition(1)\WINDOWS="Microsoft Windows XP Professional" /noexecute=optin /fastdetect C:\boot.bsd="UNIX FreeBSD/i386" C:\boot64.bsd="UNIX FreeBSD/amd64" ---cut here-- Now, the problem is that when I choose "UNIX FreeBSD/amd64" from the boot menu, it boots "UNIX FreeBSD/i386"!!! What did I missed? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
FreeBSD 6.1-RC Sigmatel 9221 audio driver
Hello, I've changed my hardware lately and cannot find the driver for sound card. My motherboard is an Intel D955XBK with on board Sigmatel 9221 audio. On Windows it plays, so, the hardware part is fine. Also cannot find the driver for my new video card: PCI Express x16 ASUS ATI RADEON X550 GE. The standard VESA driver is ok for me, by I'm just wondering if there is a driver available, so I could test 3D accelaration on FreeBSD. I'm running an up-to-date FreeBSD 6.1-RC. Any advice or a link is appreciated. ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
mysql rc.d script
Hello all, I have a FreeBSD 6-current build from almost the most recent source. I have installed mysql41-server port and observed a strange behaviour: as usual, I only have to put the mysqld_enable="yes" in my /etc/rc.conf to have mysql server started at boot, but this time it did not work. I've checked the script mode and it was OK, just like other scripts in there, and like the Apache starter script that worked fine and after i put enable_apache="YES" in rc.conf. The only difference between mysql server starter script and others was the missing ".sh" suffix. After I renamed mysql-server to mysql-server.sh everything worked fine. Is that OK? ___ freebsd-questions@freebsd.org mailing list http://lists.freebsd.org/mailman/listinfo/freebsd-questions To unsubscribe, send any mail to "[EMAIL PROTECTED]"
