On 2013-06-12 17:46, Darren Pilgrim wrote:
How do I tell resolvconf to always use a static configuration or, better
yet, to not muck with /etc/resolv.conf at all?
According to the project developer, the answer is to have resolvconf not
touch /etc/resolv.conf by put the following in /etc
On 2013-06-13 05:02, Loic Capdeville wrote:
You can configure it in your dhclient.conf file.
Use the supersede keyword.
For example, in your case add:
supersede domain-search "example.com example.net"
supersede domain-name-servers 2001:db8::53
That only addresses the DHCPv4 cli
On 13/06/2013 02:46, Darren Pilgrim wrote:
I'm running 9.1. I run a local recursive resolver, so my
/etc/resolv.conf needs to remain static. I have DHCPv4, DHCPv6 and VPN
clients running which all want to modify /etc/resolv.conf. I have set
in /etc/resolvconf.conf:
search_do
I'm running 9.1. I run a local recursive resolver, so my
/etc/resolv.conf needs to remain static. I have DHCPv4, DHCPv6 and VPN
clients running which all want to modify /etc/resolv.conf. I have set
in /etc/resolvconf.conf:
search_domains="example.com. example.net."
name_se
Hi,
I run bind on a LAN, with some LAN-only (sub)domains. On the LAN is also
a DSL modem/router that advertises ipv6 addresses. So far so good.
However, since I upgraded the server from 8-STABLE to 9.1-PRERELEASE,
the /etc/resolv.conf gets overwritten by the resolvconf script, with an
ipv6
El día Tuesday, September 14, 2010 a las 05:49:07PM +0200, Terrence Koeman
escribió:
> > > What I wanted to say: sendmail runs and DHCP changes in certain
> > > situations the IP, routing and DNS, and sendmail does not adopt on
> > these
> > > changes.
> >
> >
> It might be an idea to (mis)use th
> -Original Message-
> From: owner-freebsd-questi...@freebsd.org [mailto:owner-freebsd-
> questi...@freebsd.org] On Behalf Of tomasz dereszynski
> Sent: Tuesday, September 14, 2010 11:28 AM
> To: Matthias Apitz; freebsd-questions@freebsd.org
> Subject: Re: sendmail &
> El día Tuesday, September 14, 2010 a las 09:15:49AM +0100, tomasz
> dereszynski escribió:
>
>>
>> >
>> > Hello,
>> >
>> > When using a laptop it is normal that there are some changes in
>> > resolv.conf during the live, for example:
El día Tuesday, September 14, 2010 a las 09:15:49AM +0100, tomasz dereszynski
escribió:
>
> >
> > Hello,
> >
> > When using a laptop it is normal that there are some changes in
> > resolv.conf during the live, for example:
> >
> > boot time: no
>
> Hello,
>
> When using a laptop it is normal that there are some changes in
> resolv.conf during the live, for example:
>
> boot time: no network available
> start of PPP over UMTS: resolv.conf from provider
> start VPN to connect to company: resolv.conf from comp
Hello,
When using a laptop it is normal that there are some changes in
resolv.conf during the live, for example:
boot time: no network available
start of PPP over UMTS: resolv.conf from provider
start VPN to connect to company: resolv.conf from company
...
it seems that sendmail is not aware
.xx.10093 > 192.168.2.1.53: 12794+ ? des.no.
(24)
The reason is obvious:
- the /etc/resolv.conf on shutdown at home has this DNS resolver;
- in my office the system comes up and when at some point the WLAN
interface associates, it gets an IP and a new /etc/resolv.conf file;
Why sendmail does no
.
> [also to make things more complicated, I think I need a rule in
> rc.firewallto allow for DHCP clients to go out? It gets blocked on
> external interface when firewall comes up??]
Looks like you're using ipfw, in which case this works for me:
# /etc/rc.d/ipfw restart
>
?]
I doesn't appear to matter, I think dhclient bypasses the firewall. at
least that's my experience with PF.
> Also how do I override /etc/resolv.conf? DHCP client configures it I
> think and sets it up to point to my ISP DNS servers (which suck) and
> would like to give it mine in
hrm, thanks, but this doesn't seem to work:
`ifconfig xl0 down` doesn't do anything... executes without error, but the
interface stays up.
`/sbin/dhclient` gets a new IP, but doesn't "re-do" the firewall with new
IP, so everything is broken.
echo nameserver 123.34.
e-ran if the IP is new).
[also to make things more complicated, I think I need a rule in
rc.firewallto allow for DHCP clients to go out? It gets blocked on
external interface
when firewall comes up??]
Also how do I override /etc/resolv.conf? DHCP client configures it I think
and sets it up to point to my I
hed out DNS
> > servers to my current resolv.conf but anytime I enable dns in my
> > ppp.conf it nukes my entire resolv.conf!
> >
> > I am looking to end up with this:
> >
> > % cat /etc/resolv.conf
> > domain mydomain
> > nameserver 192.168.1.
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA256
JD Bronson wrote:
> I am using 6.2 as a DSL (PPPoE) router and also run my own internal DNS
> on the same machine. I would like to APPEND my ISP's dished out DNS
> servers to my current resolv.conf but anytime I enable dns in my
>
At 01:12 PM 5/6/2007 -0400, Bob wrote:
Be sure you have this statement in your ppp.conf
enable dns
# Gets the ISP's DNS IP address & places them
# in resolv.conf for reference by FBSD.
But this overwrites my resolv.conf doesnt it?
thats what I am trying to a
Be sure you have this statement in your ppp.conf
enable dns
# Gets the ISP's DNS IP address & places them
# in resolv.conf for reference by FBSD.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of JD Bronson
Sent: Sunday, May 06, 2007 11:40 AM
To
I am using 6.2 as a DSL (PPPoE) router and also run my own internal DNS
on the same machine. I would like to APPEND my ISP's dished out DNS
servers to my current resolv.conf but anytime I enable dns in my
ppp.conf it nukes my entire resolv.conf!
I am looking to end up with this:
"Richard Simmonds" <[EMAIL PROTECTED]> writes:
>
>
> -Original Message-
> From: RW [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, April 18, 2007 1:11 AM
> To: freebsd-questions@freebsd.org
> Cc: [EMAIL PROTECTED]
> Subject: Re: PPP and resolv.con
-Original Message-
From: RW [mailto:[EMAIL PROTECTED]
Sent: Wednesday, April 18, 2007 1:11 AM
To: freebsd-questions@freebsd.org
Cc: [EMAIL PROTECTED]
Subject: Re: PPP and resolv.conf
On Tue, 17 Apr 2007 14:48:25 +0800
"Richard Simmonds" <[EMAIL PROTECTED]> wrote:
On Tue, 17 Apr 2007 14:48:25 +0800
"Richard Simmonds" <[EMAIL PROTECTED]> wrote:
>
> >How can I stop ppp from modifying my /etc/resolv.conf?
> >Everytime I establish a pppoe session, my resolv.conf file gets
> reconfigured to my ISPs DNS Servers.
>
> I
>How can I stop ppp from modifying my /etc/resolv.conf?
>Everytime I establish a pppoe session, my resolv.conf file gets
reconfigured to my ISPs DNS Servers.
It's dhclient, not ppp that's modding the file. Adding this to your
dhclient.conf file will fix the problem
interfa
Daniel Marsh wrote:
On 4/17/07, Ansar Mohammed <[EMAIL PROTECTED]> wrote:
How can I stop ppp from modifying my /etc/resolv.conf?
Everytime I establish a pppoe session, my resolv.conf file gets
reconfigured
to my ISPs DNS Servers.
You could make resolv.conf to what you want it to be an
On 4/17/07, Ansar Mohammed <[EMAIL PROTECTED]> wrote:
How can I stop ppp from modifying my /etc/resolv.conf?
Everytime I establish a pppoe session, my resolv.conf file gets
reconfigured
to my ISPs DNS Servers.
You could make resolv.conf to what you want it to be and then do: chflag
How can I stop ppp from modifying my /etc/resolv.conf?
Everytime I establish a pppoe session, my resolv.conf file gets reconfigured
to my ISPs DNS Servers.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd
On Friday 02 March 2007 15:16, J.D. Bronson wrote:
> I am trying to have dhclient setup my resolv.conf perfect.
> I am very close.
>
> I have this in dhclient.conf:
>
> -
> interface "bge1" {
> supersede domain-name "wixb.com&q
I am trying to have dhclient setup my resolv.conf perfect.
I am very close.
I have this in dhclient.conf:
-
interface "bge1" {
supersede domain-name "wixb.com";
prepend domain-name-servers 192.l68.1.1;
request subnet-mask, broadcast-addr
V.I.Victor wrote:
> I'm simply going to change 2 "nameserver" ip-addresses.
>
> Most of what I've found re. 'resolv.conf' implies it can just be changed
> on-the-fly. However, other sources (mostly upgrading info) have a reboot
> involved.
>
&g
On Thu, Jan 25, 2007 at 12:15:47PM -0800, Chuck Swiger wrote:
> On Jan 25, 2007, at 11:53 AM, V.I.Victor wrote:
> >
> >So -- re-boot or not? (Note: this is a static-ip box running v5.4.)
>
> There is no reason to reboot after changing /etc/resolv.conf. Almost
> ever
You shouldnt need to reboot after adding a nameserver.
I'm not sure if you need to if you change domain names in there.
Grant.
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe,
On Jan 25, 2007, at 11:53 AM, V.I.Victor wrote:
I'm simply going to change 2 "nameserver" ip-addresses.
Most of what I've found re. 'resolv.conf' implies it can just be
changed on-the-fly. However, other sources (mostly upgrading info)
have a reboot involved.
I'm simply going to change 2 "nameserver" ip-addresses.
Most of what I've found re. 'resolv.conf' implies it can just be changed
on-the-fly. However, other sources (mostly upgrading info) have a reboot
involved.
So -- re-boot or not? (Note: this is a static
On Jan 16, 2007, at 12:36 AM, [LoN]Kamikaze wrote:
linux quest wrote:
Since, I desperately needed to connect to the Internet at this
point of
time, I create a file called resolv.conf in /root ... I am
thinking how
can I create a script so that it can copy resolv.conf from /root to
/etc
linux quest wrote:
> Since, I desperately needed to connect to the Internet at this point of
> time, I create a file called resolv.conf in /root ... I am thinking how
> can I create a script so that it can copy resolv.conf from /root to
> /etc/resolv.conf every 30 minutes at start
George Vanev wrote:
If you really want to copy resolv.conf from /root to /etc every 30 min
you don't need a startup script. Just add the following line in
/etc/crontab:
*/30 * * * * rootcp /root/resolv.conf
/etc/resolv.conf
I don't know what exact
If you really want to copy resolv.conf from /root to /etc every 30 min
you don't need a startup script. Just add the following line in
/etc/crontab:
*/30 * * * * rootcp /root/resolv.conf
/etc/resolv.conf
I don't know what exactly are you trying to do, b
Dear Jay & The FreeBSD Communities,
Thanks for putting your time and patience to help me out. Anyway, I
tried it out, both changing the rc.conf and the dhclient.conf (one at a
time). After that (for both of the ways), I did manage to stop the
resolv.conf from being overwritten after th
On Sun, Dec 17, 2006 at 06:42:46PM +0100, [LoN]Kamikaze wrote:
> [EMAIL PROTECTED] wrote:
> > The automatically installed /etc/resolv.conf
> > contains the next:
> >
> > nameserver 82.207.67.2
> > nameserver 213.179.244.18
> >
> > Today I d
On Sun, Dec 17, 2006 at 06:42:46PM +0100, [LoN]Kamikaze wrote:
> [EMAIL PROTECTED] wrote:
> > The automatically installed /etc/resolv.conf
> > contains the next:
> >
> > nameserver 82.207.67.2
> > nameserver 213.179.244.18
> >
> > Today I d
On Sun, Dec 17, 2006 at 06:42:46PM +0100, [LoN]Kamikaze wrote:
> [EMAIL PROTECTED] wrote:
> > The automatically installed /etc/resolv.conf
> > contains the next:
> >
> > nameserver 82.207.67.2
> > nameserver 213.179.244.18
> >
> > Today I d
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
[EMAIL PROTECTED] wrote:
> The automatically installed /etc/resolv.conf
> contains the next:
>
> nameserver 82.207.67.2
> nameserver 213.179.244.18
>
> Today I discovered that this servers is not servers of FreeBSD.org
> or
[EMAIL PROTECTED] wrote:
> The automatically installed /etc/resolv.conf
> contains the next:
>
> nameserver 82.207.67.2
> nameserver 213.179.244.18
>
> Today I discovered that this servers is not servers of FreeBSD.org
> or InterNIC, but of my ISP.
>
> I wonder
[EMAIL PROTECTED] writes:
> The automatically installed /etc/resolv.conf
> contains the next:
>
> nameserver 82.207.67.2
> nameserver 213.179.244.18
>
> Today I discovered that this servers is not servers of FreeBSD.org
> or InterNIC, but of my ISP.
>
On Dec 17, 2006, at 12:17 PM, [EMAIL PROTECTED] wrote:
The automatically installed /etc/resolv.conf
contains the next:
nameserver 82.207.67.2
nameserver 213.179.244.18
Today I discovered that this servers is not servers of FreeBSD.org
or InterNIC, but of my ISP.
I wonder how the system
In the last episode (Dec 17), [EMAIL PROTECTED] said:
> The automatically installed /etc/resolv.conf
> contains the next:
>
> nameserver 82.207.67.2
> nameserver 213.179.244.18
>
> Today I discovered that this servers is not servers of FreeBSD.org
> or InterNIC, but of m
--- [EMAIL PROTECTED] wrote:
> The automatically installed /etc/resolv.conf
> contains the next:
>
> nameserver 82.207.67.2
> nameserver 213.179.244.18
>
> Today I discovered that this servers is not servers of FreeBSD.org
> or InterNIC, but of my ISP.
>
> I won
[EMAIL PROTECTED] wrote:
The automatically installed /etc/resolv.conf
contains the next:
nameserver 82.207.67.2
nameserver 213.179.244.18
Today I discovered that this servers is not servers of FreeBSD.org
or InterNIC, but of my ISP.
I wonder how the system found these IP addresses?
Are
The automatically installed /etc/resolv.conf
contains the next:
nameserver 82.207.67.2
nameserver 213.179.244.18
Today I discovered that this servers is not servers of FreeBSD.org
or InterNIC, but of my ISP.
I wonder how the system found these IP addresses?
Are these entries created during
Is there anything different with entries in resolv.conf for IPv6 addresses?
I'm looking at the manual page for resolv.conf and didn't find anything
specific to IPv6. Therefore, I'm assuming that the entry would simply be:
nameserver fec0::3
vs.
nameserver 192.168.0.1
Or wha
> hostname="arwen.nagual.st"
> > ifconfig_re0="192.168.11.29 netmask 255.255.255.0"
> > ifconfig_ath0="dhcp ssid air01 nwkey 0xc1e1639b753021ab6d64be2575
> > hidessid authmode shared"
> >
> > What happens is that the ath0 card gets loa
5.0"
> ifconfig_ath0="dhcp ssid air01 nwkey 0xc1e1639b753021ab6d64be2575
> hidessid authmode shared"
>
> What happens is that the ath0 card gets loaded first (not wanted!) plus
> the dhcp setting changes my resolv.conf (not wanted either).
>
> How do I get this changed? re0
6d64be2575
hidessid authmode shared"
What happens is that the ath0 card gets loaded first (not wanted!) plus
the dhcp setting changes my resolv.conf (not wanted either).
How do I get this changed? re0 first, than my ath0 and NO changes to
resolv.conf?
System: freebsd-6.1R
--
dick -- http
> -Original Message-
> From: fbsd [mailto:[EMAIL PROTECTED]
> Sent: Thursday, 4 May 2006 10:56 AM
> To: Murray Taylor
> Cc: freebsd-questions
> Subject: RE: Getting DHCP to use resolv.conf? AN ANSWER
>
> >
> >
> > -Original Message-
> &g
> -Original Message-
> From: fbsd [mailto:[EMAIL PROTECTED]
> Sent: Thursday, 4 May 2006 11:02 AM
> To: Murray Taylor
> Cc: freebsd-questions
> Subject: RE: Getting DHCP to use resolv.conf? AN ANSWER
>
>
>
> The script I sent are operational on FBSD 4.1
The script I sent are operational on FBSD 4.11
with the enter/exit-hooks scripts that are
part of the base install.
NB Dont forget I run the ipf firewall rewrite rules script manually
as
root
when my IP number changes, but the DHCP -> resolv.conf is automatic
via exit-hooks
The scripts
>
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Murray
Taylor
> Sent: Sunday, April 30, 2006 7:56 PM
> To: Lowell Gilbert
> Cc: freebsd-questions@freebsd.org
> Subject: RE: Getting DHCP to use resolv.conf? AN ANSWER
&
> -Original Message-
> From: fbsd [mailto:[EMAIL PROTECTED]
> Sent: Wednesday, 3 May 2006 10:36 PM
> To: Murray Taylor
> Subject: RE: Getting DHCP to use resolv.conf? AN ANSWER
>
>
> > -Original Message-
> > From: [EMAIL PROTECTED]
> >
ient-exit-hooks file if it exists.
Create a empty /etc/dhclient-exit-hooks file and populate with this
### Start of refresh dhcpd dns ip
# This script will propagate to dhcpd the changed dns servers ip
address
# which dhcp-client puts in resolv.conf.
#
# In dh
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Lowell Gilbert
> Sent: Friday, 28 April 2006 11:09 PM
> To: [EMAIL PROTECTED]
> Cc: freebsd-questions@freebsd.org
> Subject: Re: Getting DHCP to use resolv.conf?
>
approach to the same problem, and will generally perform better.]
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] Behalf Of Bill Moran
> Sent: Wednesday, April 26, 2006 5:06 PM
> To: Telting
> Cc: freebsd-questions@freebsd.org
> Subject
I read the man dhclient.conf(5) and paid special attention to the
part about
prepend domain-name-servers.
It does not say anything about passing the dns info dhcp client puts
into resolv.conf onto the dhcpd.conf "option domain-name-servers"
statement.
I don't think you understo
On 4/26/06, Bill Moran <[EMAIL PROTECTED]> wrote:
>
> On Wed, 26 Apr 2006 13:56:57 -0700
> Telting <[EMAIL PROTECTED]> wrote:
>
> > I would like to know how I can propagate the dns servers which the dhcp
> > client puts in resolv.conf to dhcpd. I only see
Does anyone have a script that does this, that they can share?
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Bill Moran
Sent: Wednesday, April 26, 2006 5:06 PM
To: Telting
Cc: freebsd-questions@freebsd.org
Subject: Re: Getting DHCP to use resolv.conf
On Wed, 26 Apr 2006 13:56:57 -0700
Telting <[EMAIL PROTECTED]> wrote:
> I would like to know how I can propagate the dns servers which the dhcp
> client puts in resolv.conf to dhcpd. I only see how I can only
> explicitly list a domain server with "option domain-name-s
I would like to know how I can propagate the dns servers which the dhcp
client puts in resolv.conf to dhcpd. I only see how I can only
explicitly list a domain server with "option domain-name-servers". How
do I propogate non static dns serve
I would like to know how I can propagate the dns servers which the dhcp
client puts in resolv.conf to dhcpd. I only see how I can only
explicitly list a domain server with "option domain-name-servers". How
do I propogate non static dns server
On Apr 10, 2006, at 9:54 AM, [EMAIL PROTECTED] wrote:
$ cat /etc/resolv.conf
domain Sisis.de
nameserver 10.0.1.201
nameserver xxx.xxx.xxx.xxx
nameserver yyy.yyy.yyy.yyy
But only the 1st one (10.0.1.201) is contacted to make the name lookup
(I've checked this with trussing a
[EMAIL PROTECTED] wrote:
El día Monday, April 10, 2006 a las 04:07:34PM +0100, Alex Zbyslaw escribió:
There's nothing to stop you configuring that local nameserver to use
your two "backups" for names that it cannot resolve.
You could then leave the two backups in /etc/res
here's nothing to stop you configuring that local nameserver to use
> your two "backups" for names that it cannot resolve.
>
> You could then leave the two backups in /etc/resolv.conf but if your
> local nameserver is authoritative for your local domain, then you
> pr
ly enough, stupid as I am. :-(
There's nothing to stop you configuring that local nameserver to use
your two "backups" for names that it cannot resolve.
You could then leave the two backups in /etc/resolv.conf but if your
local nameserver is authoritative for your local domain, then you
pr
El día Monday, April 10, 2006 a las 10:44:52AM -0400, Ken Stevenson escribió:
> I think the problem is that once your first server responds with a
> "domain not found", that's considered an answer to your query. It
> doesn't try another DNS server just to see if it gets a different
> answer. If
[EMAIL PROTECTED] wrote:
Hi,
The man page of resolv.conf claims:
The different configuration options are:
nameserver Internet address (in dot notation) of a name server that the
resolver should query. Up to MAXNS (currently 3) name
servers may be
Hi,
The man page of resolv.conf claims:
The different configuration options are:
nameserver Internet address (in dot notation) of a name server that the
resolver should query. Up to MAXNS (currently 3) name
servers may be listed, one per keyword
Erik Trulsson wrote:
On Thu, Mar 16, 2006 at 05:29:45PM -0400, Duane Whitty wrote:
Hi all,
I am running FBSD 6.0-RELEASE
I use DHCP to configure my network interface
Thanks in advance,
Duane
P.S.
Is there a man page for the dhcp client FBSD 6 is using
(what is FBSD 6 using)?
On Thu, Mar 16, 2006 at 05:29:45PM -0400, Duane Whitty wrote:
> Hi all,
>
> I am running FBSD 6.0-RELEASE
>
> I use DHCP to configure my network interface.
> At startup my resolv.conf is overwritten, setting my
> nameserver to the address of the router running DHCP.
>
Beech Rintoul wrote:
On Thursday 16 March 2006 12:29, Duane Whitty wrote:
Hi all,
I am running FBSD 6.0-RELEASE
I use DHCP to configure my network interface.
At startup my resolv.conf is overwritten, setting my
nameserver to the address of the router running DHCP.
I tried commenting out
Duane Whitty wrote:
I use DHCP to configure my network interface.
At startup my resolv.conf is overwritten, setting my
nameserver to the address of the router running DHCP.
dhclient, also the new one updates /etc/resolv.conf with the information
received from the dhcp server. You can change
On Thursday 16 March 2006 12:29, Duane Whitty wrote:
> Hi all,
>
> I am running FBSD 6.0-RELEASE
>
> I use DHCP to configure my network interface.
> At startup my resolv.conf is overwritten, setting my
> nameserver to the address of the router running DHCP.
>
> I trie
Hi all,
I am running FBSD 6.0-RELEASE
I use DHCP to configure my network interface.
At startup my resolv.conf is overwritten, setting my
nameserver to the address of the router running DHCP.
I tried commenting out almost all of the rc.d/resolv
startup script but to no avail.
I read the man
just set the resolv.conf read-only, that should take care of it.
Ted
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] Behalf Of Ronny Machado
>C.
>Sent: Tuesday, August 16, 2005 7:07 AM
>To: freebsd-questions@freebsd.org
>Subject: RE: res
.
- Original Message -
From: "Ronny Machado C." <[EMAIL PROTECTED]>
To:
Sent: Tuesday, August 16, 2005 8:54 AM
Subject: resolv.conf
Hi list,
I'm new to FreeBSD, and this is the first time I configure a FreeBSD box.
Ok, let's get to the point: my prob
m new to FreeBSD, and this is the first time I configure a FreeBSD box.
> Ok, let's get to the point: my problem is with DNS resolution, form some
> reason the resolv.conf changes after some time (10 to 20 minutes), from
> my DNS IP to the rl0 IP. Does any one know why? My machine is an
yep bro...that's it...
-Mensaje original-
De: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED] nombre de
Lowell Gilbert
Enviado el: Martes, 16 de Agosto de 2005 10:02
Para: Ronny Machado C.
CC: freebsd-questions@freebsd.org
Asunto: Re: resolv.conf
"Ronny Machado C." &l
"Ronny Machado C." <[EMAIL PROTECTED]> writes:
> Hi list,
>
> I'm new to FreeBSD, and this is the first time I configure a FreeBSD box. Ok,
> let's get to the point: my problem is with DNS resolution, form some reason
> the resolv.conf changes after s
Hi list,
I'm new to FreeBSD, and this is the first time I configure a FreeBSD box. Ok,
let's get to the point: my problem is with DNS resolution, form some reason the
resolv.conf changes after some time (10 to 20 minutes), from my DNS IP to the
rl0 IP. Does any one know why? My mac
Glenn Dawson writes:
> >My question is: how to reliably keep your own nameserver in
> >/etc/resolv.conf, and get around the frequent protocol updates that
> >change/nullify your mods to /etc/resolv.conf.
>
> According to dhclient.conf(5
At 12:49 PM 5/8/2005, Forrest Aldrich wrote:
I can think of a few ways to resolve this, but I thought to ask here.
I have Comcast for my ISP, and of course DHCP changes /etc/resolv.conf
during each update -- lately, they've been screwing things up bigtime,
such that I simply use my own &
Also of note... if you change the bits on the file to nochg, so it can't
be updated, Comcast will detect this and disable your connection (it
happened to me).
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freeb
I can think of a few ways to resolve this, but I thought to ask here.
I have Comcast for my ISP, and of course DHCP changes /etc/resolv.conf
during each update -- lately, they've been screwing things up bigtime,
such that I simply use my own "named" instance.
My question is:
Or, if you don't feel like editing your dhclient.conf, in your
/etc/resolv.conf the first line usually reads:
search thisdomain.com
nameserver xxx.xxx.xxx.xxx
nameserver xxx.xxx.xxx.yyy
If you change the first line to read:
domain thisdomain.com
nameserver xxx.xxx.xxx.xxx
names
I have a minor problem regarding my network configuration,
specifically that the external interface on my router gets it's IP via
DHCP from the ISP, so in rc.conf
ifconfig_xl0="DHCP"
is set. This leads to the single entry in resolv.conf that I want to
be there, namely
nameserver
the external interface on my router gets it's IP via
> > DHCP from the ISP, so in rc.conf
> >
> > ifconfig_xl0="DHCP"
> >
> > is set. This leads to the single entry in resolv.conf that I want to
> > be there, namely
> >
> > nameserver 1
set. This leads to the single entry in resolv.conf that I want to
be there, namely
nameserver 127.0.0.1
being replaced with my ISP's nameservers, which in return makes
resolving of LAN IPs or even localhost via the installed BIND
difficult for the machine. I don't want dhclient to change t
Hi All,
I have a minor problem regarding my network configuration,
specifically that the external interface on my router gets it's IP via
DHCP from the ISP, so in rc.conf
ifconfig_xl0="DHCP"
is set. This leads to the single entry in resolv.conf that I want to
be there, nam
lov.conf and hosts file entrys correct?
>>
>> resolv.conf just has:
>>
>> nameserver 192.168.1.254
>>
>> hosts has:
>>
>> ::1 localhost localhost.my.domain
>> 127.0.0.1 localhost localhost.my.domain
>> 192.168.1.3 VaioBSD VaioBSD.eircom.net
&
Danny Browne wrote:
Browsers in fluxbox (and gnome when i treid that switching to that) take
forever to fetch webpages (2 mins on a DSL line). but the speed is normal when
using ping or ftp or whatever from terminal/console.
are my reslov.conf and hosts file entrys correct?
resolv.conf just has
Browsers in fluxbox (and gnome when i treid that switching to that) take
forever to fetch webpages (2 mins on a DSL line). but the speed is normal when
using ping or ftp or whatever from terminal/console.
are my reslov.conf and hosts file entrys correct?
resolv.conf just has:
nameserver
1 - 100 of 155 matches
Mail list logo