I want add some my own options to kernel.
I've add U04_KOI8R opt_cdunicode.h to sys/conf/options,
and #include opt_cdunicode.h to source files.
But when i do make depend, mkdep cant find opt_cdunicode.h
Whats wrong and how it works?
___
[EMAIL
On Sat, Nov 08, 2003 at 12:36:04AM -0600, F. Even wrote:
I am running a FreeBSD 4.0 box.
The ports collection does not support 4.0. See http://www.freebsd.org/ports/
Kris
pgp0.pgp
Description: PGP signature
On 06 Nov 2003 20:17:11 -0500
Frank Laszlo [EMAIL PROTECTED] wrote:
Ok, I figured out what the problem was.
It's really quite interesting.
you see, I was building this via ssh to my server. My server has had
network issues (due to the connection) all day, and my ssh sessions were
lagging
Hi, I apologise if this is the wrong forum. I have to clone an old HP
x386 freeBSD 4.5 system to a new DELL 400SC machine. I am taking the
opportunity to upgrade to 4.9.
In the setup I see no network devices are configured. There are a bunch
that I could select (eg IBM Etherjet, NE100,etc),
4.9-RELEASE
Hello, I now have a server running named, and it's assigned a public IP
address. Within this server is a jail that is running sshd, and the jail
has it's own unique public IP. The ethernet adapter has an alias to
accommodate the jail. (And it also works if I put the alias on the
* Sham Khalil [EMAIL PROTECTED] [20031108 03:38]: wrote:
On Fri, 7 Nov 2003, Odhiambo Washington wrote:
* Norhisham Khalil [EMAIL PROTECTED] [20031107 11:30]: wrote:
Quoting Kris Kennaway [EMAIL PROTECTED]:
On Fri, Nov 07, 2003 at 08:23:03AM +0800, Sham Khalil wrote
* Lewis Thompson [EMAIL PROTECTED] [20031107 18:01]: wrote:
On Fri, Nov 07, 2003 at 05:56:43PM +0300, Odhiambo Washington wrote:
* Lewis Thompson [EMAIL PROTECTED] [20031107 17:28]: wrote:
At my university everything is firewalled and the only way I can
transfer files to/from my account
Hello,
Since FreeBSD 5.x include 4.x dynamic libraries, is there any way
on a 5.x box to build (with gcc) binaries which will run on a 4.x box?
Thanks in advance,
--
Jacques Beigbeder| [EMAIL PROTECTED]
Service de Prestations Informatiques | http://www.spi.ens.fr
Ecole
please forward to the appropriate people.
problem: sysinstall in CDimage cannot write to HPT raid
work around:
installation procedure freeBSD 5.2
soyo P4S Dragon ultra.
1. plug one of the hard drives into IDE1
2. install freeBSD onto drive.
3. edit /etc/fstab, change drives to ar0s1a ar0s1b
Odhiambo Washington [EMAIL PROTECTED] writes:
* Lowell Gilbert [EMAIL PROTECTED] [20031108 05:32]: wrote:
Copying a whole directory tree is pretty easy, especially with tool
support, it's transparent while you're doing the editing, and you get
full speed while you're editing. That would
* Jean-Baptiste Quenot [EMAIL PROTECTED] [20031102 16:24]:
* Joan Picanyol i Puig:
It works for me, the accentuated chars show up in xterm...
It doesn't for me, nor in console or under X. I'm pasting underneath
what I see from the console (excerpt from the test file):
3) Run the
Hello,
I keep getting this message on my server. Could you tell me how to get rid of it.
Thanks,
arp: 192.168.123.1 moved from 00:40:10:0f:c0:b8 to 00:50:18:07:03:36 on lnc0
___
[EMAIL PROTECTED] mailing list
On Sat, 8 Nov 2003 09:46:05 -0700, William Downs [EMAIL PROTECTED]
wrote:
I keep getting this message on my server. Could you tell me how to get
rid of it. Thanks,
arp: 192.168.123.1 moved from 00:40:10:0f:c0:b8 to 00:50:18:07:03:36 on
lnc0
Sounds like more than one machine is trying to
In the last episode (Nov 08), Jacques Beigbeder said:
Since FreeBSD 5.x include 4.x dynamic libraries, is there any way on
a 5.x box to build (with gcc) binaries which will run on a 4.x box?
No, since you also need 4.x headers and 4.x static libraries. You can
do this if you install 4.x in a
Looks like you have 2 computers fighting for the same IP.
00:40:10:0f:c0:b8 and 00:50:18:07:03:36 are the hardware (mac)
addresses of the competing computers. To fix number each computer with a
different IP.
Jay
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On
Hi,
Just ran my weekly cvsup program followed by portsbd -Uu. Tried running
portsversion -l and received a message indicating that I should run
pkgdb -F to deal with a stale dependency. Note following:
Stale dependency: sgmlformat-1.7_2 - docbook-3.1_2 (textproc/docbook-310):
The problem you describe is becoming common in the 4.x versions of
FBSD.
I have seen these solutions voiced previously in this list.
1. Check the PC's bios, look for a toggle to disable plug-n-play
function.
2. Check that your PCI cards are not in the first or last PCI
expansion
slot
I am running on an old Toshiba Portege with this video
chipset:
NM2200 [MagicGraph 256AV]
Everything is showing dithered under X but when I boot
to Windows I get great color. I suspect that this is
merely a configuration problem but I don't
know what is wrong with my config file. (see attached)
I made /usr/ports/comms/ltmdm and installed it. But
it won't load. It gets an error. It reports suers_td
being undefined.
Is this a problem with the port or do I need to build
a custom kernel?
__
Do you Yahoo!?
Protect your identity with Yahoo! Mail
In the last episode (Nov 08), Marc G. Fournier said:
Does anyone know of a tool available under X similar to this?
Well, mtr can give you the traceroute in a window, and smokeping can
give you the historical reporting. I don't know of a tool that does
both at once.
--
Dan Nelson
Last night I updated all my source files to buildworld, but ran into
a problem. I tried to build it 3 times, and each time it stops at the
same spot. If I retype the last commands show letter for letter they
work. It stops at something like $gzip -cn cvs.info cvs.info.gz. If
I
On Saturday 08 November 2003 12:10 pm, Jason wrote:
Last night I updated all my source files to buildworld, but ran into
a problem. I tried to build it 3 times, and each time it stops at the
same spot. If I retype the last commands show letter for letter they
work. It stops at something
Is there a way I can make these commands run at boot time:
# sysctl hw.snd.pcm0.vchans=4
# sysctl hw.snd.maxautovchans=4
Rather than enter them in each time I want to use xmms in kde? I guess aRTs
hogs psm0.
Thanks.
___
[EMAIL PROTECTED] mailing
Hello
I have problem when compiling php4...
$ cd /usr/ports/lang/php4
$ pwd
/usr/ports/lang/php4
$ ls
Makefiledistinfopkg-descr pkg-plist work
README.html files pkg-message scripts
$ make
=== php4-4.3.2.r4 depends on file: /usr/local/sbin/apxs -
I just downloaded the iso images for version 5.1 from the ftp site and
started a new installation. The md5sum checked out ok on the image and the
cd burned fine under WinXP. I was forced to install only the minimum
installation, though, since larger installations had really slow transfer
If one of my clients makes a DNS query for a hostname that is not cached,
my firewall subsequently makes a flurry of PTR queries. I am at a loss to
explain why.
For example:
XX+/192.168.1.13/202.1.168.192.in-addr.arpa/PTR/IN
XX+/192.168.1.13/www.davinci.com/A/IN
Alex Kelly wrote:
Is there a way I can make these commands run at boot time:
# sysctl hw.snd.pcm0.vchans=4
# sysctl hw.snd.maxautovchans=4
Rather than enter them in each time I want to use xmms in kde? I guess aRTs
hogs psm0.
You may want to take a look at the sysctl.conf(5) man page.
Uwe
--
I think your problem is that you have not searched this mailing list
archives. This answer about sound card and my previous msg about nic
and modem pci cards not being found are in the archives. You really
should do some home work and search the archives before asking
questions.
I believe the
i am attempting an install of FreeBSD 4.6 on a generic machine with an AMD
1800 chip. Probing devices hangs and i can't get any further with my
install. i purchased FreeBSD 4.6 from FreeBSD mall. can anybody help me with
this? Please!
thanks.
___
[EMAIL
Try stripping the pc down to a bare bones box. Just 1 hard drive and
cdrom drive. Remove all pci cards. If install works then add one
hardware device at a time and boot system.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] Behalf Of Jamie
Tatton
Sent: Saturday,
Seems to mean just that. Go to the php page on apache:
http://us3.php.net/imap. I confess to not know what YAZ is :)
On Sat, 8 Nov 2003, Víctor Gutiérrez Cruz wrote:
Hello
I have problem when compiling php4...
$ cd /usr/ports/lang/php4
$ pwd
/usr/ports/lang/php4
$ ls
Makefile
Just ran my weekly cvsup program followed by portsbd -Uu. Tried running
portsversion -l and received a message indicating that I should run
pkgdb -F to deal with a stale dependency. Note following:
Stale dependency: sgmlformat-1.7_2 - docbook-3.1_2 (textproc/docbook-310):
docbook-xsl-1.62.3
On Saturday 08 November 2003 12:27 pm, Kent Stewart wrote:
On Saturday 08 November 2003 12:10 pm, Jason wrote:
Last night I updated all my source files to buildworld, but ran into
a problem. I tried to build it 3 times, and each time it stops at the
same spot. If I retype the last
Hello, all.
I have been having problems using portupgrade to
upgrade atk on my FreeBSD 5.1 machine. Nothing
else seems to have difficulty, but an attempt to
upgrade atk produces endless amounts of this:
fetch: atk-1.4.1.tar.bz2: local modification time
does not match remote
Attempting to
People,
Setting up netscape to use realplayer and acroread took
awhile but I finally got it. I've been using mozilla
more and more, but still haven't figured out howto get
it to successfully spawn acroread.
Any moz wizards out there who can
Since you are top-posting, I will, too. :)
Device pcm was all it took!
Sound, modem, and nic are all recognized now.
I do apologize for not doing enough homework before asking my question.
I just automatically Google for answers, it never occurred to me to
search the archives.
Tell you
On Sat, 8 Nov 2003 14:31:55 -0800 (PST)
RexFelis [EMAIL PROTECTED] wrote:
I always do a portsdb -Uu after each cvsup.
pkgdb -F does nothing. Does anyone know what I
can do to fix this? Thanks in advance!
Just delete /usr/ports/distfiles/gnome2/atk* and re-run portupgrade.
That's all.
I have installed ipfw and each time the machien is rebooted I lose the rules I added.
any thoughts?
There is no place like 127.0.0.1
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send
Check out ntop.
On Sat, 08 Nov 2003 02:29:08 -0200
Augusto Jun Devegili [EMAIL PROTECTED] wrote:
Hi all,
I have a small home LAN with four machines. One of them (mine, actually)
runs FreeBSD 5.1 and serves as a NAT/gateway between the LAN and an ADSL
connection.
I would like a tool for
Lee Harr wrote:
Just ran my weekly cvsup program followed by portsbd -Uu. Tried running
portsversion -l and received a message indicating that I should run
pkgdb -F to deal with a stale dependency. Note following:
Stale dependency: sgmlformat-1.7_2 - docbook-3.1_2
(textproc/docbook-310):
On Sat, Nov 08, 2003 at 01:00:06PM -0800, Jason C. Wells wrote:
If one of my clients makes a DNS query for a hostname that is not cached,
my firewall subsequently makes a flurry of PTR queries. I am at a loss to
explain why.
For example:
XX+/192.168.1.13/202.1.168.192.in-addr.arpa/PTR/IN
Hi list!
I'm currently trying to create a Knoppix-like desktop system from 4.9 sources,
with almost no sourcecode change.
I made a new directory where I create the new system in, then I built the
world and some of my favorite ports into this directory. For all this, I
modified a shellscript I
I'm trying to establish an encrypted PPTP connection to a Cisco VPN
concentrator using mpd-3.14. It works fine when I disable all
encryption, but with even 40-bit stateless, I get errors like:
[vpn] LCP: rec'd Protocol Reject #2 link 0 (Opened)
[vpn] LCP: protocol 0x32f7 was rejected
[vpn] LCP:
You can easily use count rules in ipfw for this. I did this back when I
had a roommate who was a pornmeister. The first month that our DSL bill
came in at plus $30, I started counting. He was using about 85% of our
bandwidth.
Later,
Jason C. Wells
I can't find the modem . although I did finally get kde installed
are there any simple instructions for finding your modem and
hitching up to the internet
___
[EMAIL PROTECTED] mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To
I did another cvsup, same result, so now I've removed /usr/src as well as
/usr/sup/src-all/ and am downloading the full source fresh again...
hopefully it was just a problem with cvsup being confused about a sync.
- Original Message -
From: Odhiambo Washington [EMAIL PROTECTED]
To:
this is slowly starting to get annoying...
i've got a logitech wheel mouse connected to my pc, installed freebsd
5.1-RELEASE and had a few problems with the usb mouse at first, but
don't recall changing anything when it finally worked on the usb port.
now i just disconnected everything from my
On Sat, Nov 08, 2003 at 11:53:08AM -0800, Lorin Lund wrote:
I made /usr/ports/comms/ltmdm and installed it. But
it won't load. It gets an error. It reports suers_td
being undefined.
Is this a problem with the port or do I need to build
a custom kernel?
I just tried it out. The port
according to the man page for tar --exclude-from and -X are supported.
This command does not do what I expected it to do:
tar -cz -f/usr/local/tmp/RoddieRodHome.tgz /home/roddierod
--exclude-from=/home/roddierod/.pan
Now I would expect that this would create a tar gzip file called
I cannot get my HP Deskjet 3420 printer to work. I've read all the prior posts
for USB printers, checked the handbook and the complete freebsd book. After
doing so, I've come up with this...
The kernel found the printer (dmesg):
ulpt0: hp deskjet 3420, rev 2.00/1.00, addr 2, iclass 7/1
ulpt0:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Sunday 09 November 2003 00:44, Alex Kelly wrote:
I cannot get my HP Deskjet 3420 printer to work. I've read all the prior
posts for USB printers, checked the handbook and the complete freebsd book.
After doing so, I've come up with this...
No particular reason I tried lpd.
I'll try CUPS and see what happens.
On Saturday 08 November 2003 07:53 pm, Chris Howells wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Hi,
On Sunday 09 November 2003 00:44, Alex Kelly wrote:
I cannot get my HP Deskjet 3420 printer to work. I've
Thank you for your work on this mailing list.
Is there anybody who knows how to correct the starting problems of Nautilus
1.x on 4.6.2 or 4.7?
With my best regards
VITTORI
___
[EMAIL PROTECTED] mailing list
On Sat, 2003-11-08 at 20:02, .VWV. wrote:
Thank you for your work on this mailing list.
Is there anybody who knows how to correct the starting problems of Nautilus
1.x on 4.6.2 or 4.7?
Nautilus 1.x is quite old, and no longer available in recent port
collections for FreeBSD. However, simply
while recently cvsup'ing my box here at home, i had a weird thing happen...
i had already built world, built and installed the kernel, installed world (including
all
appropriate reboots), and when i brought it back up, but prior to running mergemaster,
i
popped the jumper on the circuit the
While logged into a jail (running on a public IP address), I can SSH into it and run
/stand/sysinstall. I choose the options to install a port or package via FTP, and I
end up with a message like No network devices available
I found a year-and-a-half-old post that mentioned sysinstall trying
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Jason C. Wells
Sent: Sunday, 9 November 2003 7:44 AM
To: Augusto Jun Devegili
Cc: [EMAIL PROTECTED]
Subject: Re: Gateway traffic reporting tool (port)
You can easily use count rules in ipfw
On Sun, Nov 09, 2003 at 01:32:01AM +0100, Alex de Kruijff wrote:
On Sat, Nov 08, 2003 at 11:53:08AM -0800, Lorin Lund wrote:
I made /usr/ports/comms/ltmdm and installed it. But
it won't load. It gets an error. It reports suers_td
being undefined.
Is this a problem with the port or
On 11/8/03 2:01 PM, [EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Date: Sat, 8 Nov 2003 00:00:09 -0800
From: Kris Kennaway [EMAIL PROTECTED]
Subject: Re: revived ports collection, errors galore
To: F. Even [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]
Content-Type:
My server, with a public IP address, is running named and sshd. This server is also
running IPFW2.
There is a jail also running, with it's own unique public IP address. I have found
that IPFW2 will filter traffic to/from the jail, no matter if I put the jail's alias
on the ethernet device
I'm trying to get MapServer 4.0.1 compiled on 4.7. I have compiled and
installed gd-2.0.15. When I perform a configure I get this error
message:
checking for GD 2.0.12 or higher...
checking for gdImageSetAntiAliased in -lgd... no
checking for gdImageSetAntiAliased in -lgd... (cached) no
Hi all
I got this port 1658 opening on the server
udp4 0 0 *.**.*
udp4 0 0 *.1658 *.*
udp4 0 0 *.**.*
I checked this internet and this port is for sixnetudr
but
1/ I don't know what it is?
2/ I don't
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Have you tried telneting to the port?
- -Frank
Peter Kok wrote:
| Hi all
|
| I got this port 1658 opening on the server
|
|
| udp4 0 0 *.**.*
| udp4 0 0 *.1658 *.*
| udp4 0 0
On Sat, Nov 08, 2003 at 07:40:10PM -0600, F. Even wrote:
On 11/8/03 2:01 PM, [EMAIL PROTECTED]
[EMAIL PROTECTED] wrote:
Date: Sat, 8 Nov 2003 00:00:09 -0800
From: Kris Kennaway [EMAIL PROTECTED]
Subject: Re: revived ports collection, errors galore
To: F. Even [EMAIL PROTECTED]
Cc:
On Sat, 08 Nov 2003 21:23:13 -0500, Peter Kok [EMAIL PROTECTED]
wrote:
I got this port 1658 opening on the server
udp4 0 0 *.**.*
udp4 0 0 *.1658 *.*
udp4 0 0 *.**.*
I checked this internet and
When I try to boot from CD-ROM to install my FreeBSD 4.6
my computer stops to work. I do:
1) Booting from CD-ROM
2) Skip kernel configuration.
3) Then I see:
[...something before...]
plip0:PLIP network interface on ppbus0
ad0: READ command timeout tag=0 serv=0 - resetting
ata0: resetting devices
On Sat, Nov 08, 2003 at 09:23:13PM -0500, Peter Kok wrote:
Hi all
I got this port 1658 opening on the server
udp4 0 0 *.**.*
udp4 0 0 *.1658 *.*
udp4 0 0 *.**.*
I checked this internet and
On Sat, Nov 08, 2003 at 09:41:30PM -0500, Frank Laszlo wrote:
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
Have you tried telneting to the port?
Telnet uses TCP. That port is an UDP port. Telneting to it will not
work.
- -Frank
Peter Kok wrote:
| Hi all
|
| I got this port
-BEGIN PGP SIGNED MESSAGE-
Hash: SHA1
crap your right.. im a little off today :/
- -Frank
Erik Trulsson wrote:
|On Sat, Nov 08, 2003 at 09:41:30PM -0500, Frank Laszlo wrote:
|
|-BEGIN PGP SIGNED MESSAGE-
|Hash: SHA1
|
|
|Have you tried telneting to the port?
|
|
|Telnet uses
On Sun, 9 Nov 2003 07:39:01 +0500
[EMAIL PROTECTED] granted us these pearls of wisdom:
When I try to boot from CD-ROM to install my FreeBSD 4.6
my computer stops to work. I do:
1) Booting from CD-ROM
2) Skip kernel configuration.
3) Then I see:
[...something before...]
plip0:PLIP network
Hey people, I just had this problem.
Here's what worked for me:
rm -r /usr/obj
cd /usr/src
make world
HTH
Eric F Crist
President
AdTech Integrated Systems, Inc
(952) 403-9000
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Kent Stewart
Sent:
Eric F Crist
President
AdTech Integrated Systems, Inc
(952) 403-9000
-Original Message-
From: Minnesota Slinky [mailto:[EMAIL PROTECTED]
Sent: Saturday, November 08, 2003 9:38 PM
To: 'Kent Stewart'; 'Jason'; '[EMAIL PROTECTED]'
Subject: RE: buildworld error
Hey people, I just had
On 11/08/03 22:45, Gary Kline wrote:
Setting up netscape to use realplayer and acroread took
awhile but I finally got it. I've been using mozilla
more and more, but still haven't figured out howto get
it to successfully spawn acroread.
Heh. I gave up and just set Firebird to spawn xpdf
On Sat, 8 Nov 2003, Alex Kelly wrote:
I cannot get my HP Deskjet 3420 printer to work. I've read all the prior posts
for USB printers, checked the handbook and the complete freebsd book. After
doing so, I've come up with this...
I edited printcap in /etc to look like this:
lp|ps|local hp
On Sun, Nov 09, 2003 at 03:56:48AM +, David Gerard wrote:
On 11/08/03 22:45, Gary Kline wrote:
Setting up netscape to use realplayer and acroread took
awhile but I finally got it. I've been using mozilla
more and more, but still haven't figured out howto get
it to
Hello,
I want to open an internet cafe' with linux, unix or variants on the desktop pcs
I looking for important information about whitch distribution is the good one for this
kind of bussiness and for what distribution I can find games (specially) and other
programs for learning ( for instance
On Saturday 08 November 2003 12:01 pm, alextintea wrote:
Hello,
I want to open an internet cafe' with linux, unix or variants on the
desktop pcs I looking for important information about whitch distribution
is the good one for this kind of bussiness and for what distribution I can
find games
On Sun, 9 Nov 2003 09:49, Shawn Guillemette wrote:
I have installed ipfw and each time the machien is rebooted I lose the
rules I added.
any thoughts?
Do you mean you have added them by hand at the command lline?
I believe the norm is to have them in rc.firewall and with the appropriate
On Sun, 9 Nov 2003 06:20, Lorin Lund wrote:
I am running on an old Toshiba Portege with this video
chipset:
NM2200 [MagicGraph 256AV]
Everything is showing dithered under X but when I boot
to Windows I get great color. I suspect that this is
merely a configuration problem but I don't
know
Hi,
I need to use an 80GB hard disk on my
old computer, which can only detect
HDs smaller than 8GB.
Does anyone have any advice?
How about using one of these IDE to
USB racks from ViPower
(www.vipower.com)? Do they work on
FreeBSD? If so, will my HD work fine
with it?
Thanks!
---
Acabe com
On Sun, 9 Nov 2003, Kathy Quinlan wrote:
I have a few questions, IPFW shows the result as packets right ? And not
all packets are equal ? How do I get the information as human readable
?
If I am wrong please correct me, it is the only way we learn.
'ipfw show' gives a byte count as well as
If I remember correctly, FreeBSD (itself) doesn't use information from the BIOS. Frees
should be able to see the entire HDD. If you get geometry warnings when you attempt to
slice the drive, use an hdd utility to give you the correct geometry.
You may want to compare my suggestion with other
On Sun, Nov 09, 2003 at 03:42:36AM -0200, fallenbr wrote:
Hi,
I need to use an 80GB hard disk on my
old computer, which can only detect
HDs smaller than 8GB.
The computer can almost certainly handle large disks, even though the
BIOS does not.
Since FreeBSD does not use the BIOS for
while recently cvsup'ing my box here at home, i had a weird
thing happen...
i had already built world, built and installed the kernel,
installed world (including all
appropriate reboots), and when i brought it back up, but
prior to running mergemaster, i
popped the jumper on the
84 matches
Mail list logo
