Hi,
FreeBSD ayiin.octantis.com.au 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #94: Wed
Oct 15 09:46:16 EST 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AYIIN i386
I've noticed when /usr becomes full (due to a large port build or other
reasons) that my computer becomes completely locked up - frozen.
Steve Kargl [EMAIL PROTECTED] writes:
On Wed, Oct 15, 2008 at 09:33:39AM +0400, Boris Samorodov wrote:
Steve Kargl [EMAIL PROTECTED] writes:
Which linux base port is recommended for FreeBSD-current on amd64?
Well, the answer is just install any linux application you need from
On Tue, 2008-10-14 at 12:14 +0200, Dominique Goncalves wrote:
Hi,
On Tue, Oct 14, 2008 at 12:03 AM, Aniruddha [EMAIL PROTECTED] wrote:
I'm trying to mount (USB) devices in KDE/Gnome automagically through
dbus and hal. I added the following lines to /etc/rc.conf:
dbus_enable=YES
On Tue, 2008-10-14 at 23:43 -0700, Jeremy Chadwick wrote:
Thanks, I followed the faq to the letter and it show a dialog when I
insert a USB stick. Unfortunately when I insert an sdcard still nothing
happens.
Can anyone confirm that dbus and/or hald have anything to do with this?
(I
Each time my internet connection is under heavy lead it gets killed
after a minute of 10. I tried the following commands to get the internet
back up, but nothing helped:
/etc/rc.d/netif restart
ifconfig mynic down
ifconfig mynic up
Even worse the last time I issued a '/etc/rc.d/netif restart'
On Wed, Oct 15, 2008 at 09:03:00AM +0200, Aniruddha wrote:
On Tue, 2008-10-14 at 23:43 -0700, Jeremy Chadwick wrote:
Thanks, I followed the faq to the letter and it show a dialog when I
insert a USB stick. Unfortunately when I insert an sdcard still nothing
happens.
Can anyone
On Wed, Oct 15, 2008 at 09:13:00AM +0200, Aniruddha wrote:
Each time my internet connection is under heavy lead it gets killed
after a minute of 10. I tried the following commands to get the internet
back up, but nothing helped:
/etc/rc.d/netif restart
ifconfig mynic down
ifconfig mynic
Just a followup...
2008/10/14 Manolis Kiagias [EMAIL PROTECTED]:
James Butler wrote:
Greetings all,
I'm using 7-stable on my Thinkpad X31, with Xfce recently (2 weeks or
so) installed from packages. I have two minor problems with Xfce, at
least one of which could be HAL/DBUS related - I'd
On Wed, Oct 15, 2008 at 08:36:39AM +0200, Aniruddha wrote:
On Tue, 2008-10-14 at 12:14 +0200, Dominique Goncalves wrote:
Hi,
On Tue, Oct 14, 2008 at 12:03 AM, Aniruddha [EMAIL PROTECTED] wrote:
I'm trying to mount (USB) devices in KDE/Gnome automagically through
dbus and hal. I added
Hello!
I would like to upgrade my curl to the latest 7.19.0 version because
it is fixes some problems that 7.18.0 has. I would like to upgrade via
ports system for future compatibility. I have written to the port
maintainer a week ago but no change.
Is anyone have a folder ftp/curl for 7.19.0
On Wed, Oct 15, 2008 at 10:02:44AM +0200, Artifex Maximus wrote:
Hello!
I would like to upgrade my curl to the latest 7.19.0 version because
it is fixes some problems that 7.18.0 has. I would like to upgrade via
ports system for future compatibility. I have written to the port
maintainer a
I've been getting a lot of rejections: Helo command rejected: Host not
found (in reply to RCPT TO command). So now I'm running a test to see if
this one will get through.
___
freebsd-questions@freebsd.org mailing list
On Wed, Oct 15, 2008 at 10:24:27AM +1000, Da Rock wrote:
I've been getting a lot of rejections: Helo command rejected: Host not
found (in reply to RCPT TO command). So now I'm running a test to see if
this one will get through.
I do not know why on earth you are testing this crap using a
On Wed, Oct 15, 2008 at 12:39:25PM +0200, Artifex Maximus wrote:
On Wed, Oct 15, 2008 at 10:32 AM, Jeremy Chadwick [EMAIL PROTECTED] wrote:
On Wed, Oct 15, 2008 at 10:02:44AM +0200, Artifex Maximus wrote:
I would like to upgrade my curl to the latest 7.19.0 version because
it is fixes some
netstat -in
I have a Marvell Yukon onboard nic.
that's normal ;) but some NORMAL working NIC.
you may try to disable some features on that nic too
___
freebsd-questions@freebsd.org mailing list
On Wed, Oct 15, 2008 at 01:17:58PM +0200, Aniruddha wrote:
On Wed, 2008-10-15 at 00:26 -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 09:13:00AM +0200, Aniruddha wrote:
Each time my internet connection is under heavy lead it gets killed
after a minute of 10. I tried the following
Running AMD64 on FreeBSD7.1-PRERelease KDE4.1.2 ..
Below is the error when trying to compile it-
usr/ports/net/kdenetwork4/work/kdenetwork-4.1.2/kopete/kopete/contactlist/kopetegroupviewitem.h:53:
warning: by 'QString KopeteGroupViewItem::toolTip() const'
In file included from
2008/10/15 Jeremy Chadwick [EMAIL PROTECTED]
On Wed, Oct 15, 2008 at 02:32:25PM +0200, Jon Theil Nielsen wrote:
Dear list,
Something happened that I don't think should be possible. I lost all
three
disks in my RAID 5 array simultaneously after approx. two years without
any
problem.
On Wed, 2008-10-15 at 21:09 +0900, PYUN Yong-Hyeon wrote:
This controller is known to buggy one. See below.
[...]
Trying to mount root from ufs:/dev/ad16s3a
WARNING: / was not properly dismounted
GEOM_LABEL: Label ext2fs/home removed.
GEOM_LABEL: Label ext2fs/data removed.
On Wed, Oct 15, 2008 at 04:24:21PM +0200, Aniruddha wrote:
On Wed, 2008-10-15 at 21:09 +0900, PYUN Yong-Hyeon wrote:
This controller is known to buggy one. See below.
[...]
Trying to mount root from ufs:/dev/ad16s3a
WARNING: / was not properly dismounted
GEOM_LABEL: Label
I've been writing some basic SCTP socket code and have found that SCTP
doesn't bind to the loopback IPv6 address - it binds to all the other
addresses, including the external IPv6, link-local and IPv4 loopback
addresses. Is there something about the way SCTP works that means it
doesn't work
Agreed with t-u-t. I tried new pc-bsd7 on my old laptop (Celeron
1,6GHz/1.5G RAM/15GB dedicated on HDD/Intel GME video) and it runs
rather good (with almost all desctop effects disabled). Not so blazing
fast of course, but still enough for doing everyday stuff.
--
Best regards,
Jeff
On Wed, 2008-10-15 at 00:26 -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 09:13:00AM +0200, Aniruddha wrote:
Each time my internet connection is under heavy lead it gets killed
after a minute of 10. I tried the following commands to get the internet
back up, but nothing helped:
On Thu, 2008-10-09 at 10:52 -0400, Mikel King wrote:
On Oct 8, 2008, at 9:00 PM, Chad Marshall wrote:
No Problem, I figured that there are other systems out there
with a
longer uptime. I have this server as a
postfix/courier-imap/
On Wed, Oct 15, 2008 at 04:31:01AM -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 01:17:58PM +0200, Aniruddha wrote:
On Wed, 2008-10-15 at 00:26 -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 09:13:00AM +0200, Aniruddha wrote:
Each time my internet connection is under
One thing worth trying would be to disable MSI/MSI-X. You can disable
these by adding the following to your /boot/loader.conf :
hw.pci.enable_msix=0
hw.pci.enable_msi=0
what's wrong in MSI interrupts?
mskc0: Uncorrectable PCI Express error
mskc0: Uncorrectable PCI Express error
Those
On Wed, Oct 15, 2008 at 03:51:19PM +0200, Jon Theil Nielsen wrote:
2008/10/15 Jeremy Chadwick [EMAIL PROTECTED]
On Wed, Oct 15, 2008 at 02:32:25PM +0200, Jon Theil Nielsen wrote:
Dear list,
Something happened that I don't think should be possible. I lost all
three
disks in my
On Thu, 2008-10-09 at 10:03 -0500, Paul Schmehl wrote:
--On Thursday, October 09, 2008 09:34:02 -0500 Jerry
McAllister
[EMAIL PROTECTED] wrote:
On Thu, Oct 09, 2008 at 07:07:31AM -0700, Chad Marshall
wrote:
On 10/14/2008 at 12:03 PM [EMAIL PROTECTED] wrote:
|Manish Jain [EMAIL PROTECTED] writes:
|
| I am poor at networking and need a little bit of help. My dad has a
| Windows 2000 machine with a network card but does not have a connection
| to the internet.
|
|When I started writing this, I
Hi all
I get an error when compiling the RELENG_7 kernel on i386.
cc -c -x assembler-with-cpp -DLOCORE -O -pipe -std=c99 -g -Wall
-Wredundant-decls -Wnested-externs -Wstrict-prototypes -Wmissing-prototypes
-Wpointer-arith -Winline -Wcast-qual -Wundef -Wno-pointer-sign
-fformat-extensions
On Wed, Oct 15, 2008 at 09:09:11PM +0900, PYUN Yong-Hyeon wrote:
On Wed, Oct 15, 2008 at 04:31:01AM -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 01:17:58PM +0200, Aniruddha wrote:
On Wed, 2008-10-15 at 00:26 -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 09:13:00AM
--- On Tue, 10/14/08, Unga [EMAIL PROTECTED] wrote:
From: Unga [EMAIL PROTECTED]
Subject: An endian error
To: freebsd-questions@freebsd.org
Date: Tuesday, October 14, 2008, 8:00 PM
Hi all
I'm trying to compile RELENG_7 kernel on i386.
The make buildkernel develops an endian related
Dear list,
Something happened that I don't think should be possible. I lost all three
disks in my RAID 5 array simultaneously after approx. two years without any
problem. And I fear I will never see my data again. But I really hope some
of you clever persons can give me some hints. My system is:
All,
It's working with FBSD amd64 now.
I had to enable the Virtualization Technology on the PowerEdge
BIOS.
Although I understand that this option could enhance some
virtualization features, it's not clear that I HAVE to enable it to run
64bits OSs.
Thank you all,
-
Hello,
the drives to the other machine and try to make them online again. Do you
think I should try?
If I were you, I would first buy/get a XXX GB SATA drive, create a filesystem
there
and copy all three disks block-by-block as three separate files (which will be
the size of the disks). This
On Thu, 2008-10-09 at 07:50 -0700, Chad Marshall wrote:
Here's what I said to the last guy who says my skin is thin,
just
leave well enough alone and drop it please. Seems your skin is
thin as
well if you can't handle a little back talk :)
Been having trouble posting with a new mail server (only to your server
mind)- just trying sort it out.
Cheers
___
freebsd-questions@freebsd.org mailing list
http://lists.freebsd.org/mailman/listinfo/freebsd-questions
To unsubscribe, send any mail to
On Wed, 2008-10-15 at 07:43 -0700, Jeremy Chadwick wrote:
Now you need to rebuild the kernel and install the kernel. In this
scenario, when building the kernel DO NOT use any -j flags, as if the
driver doesn't build, you'll be scrolling back through pages of data to
try and find out why.
On Tue, 2008-10-14 at 06:46 -0400, Michael Powell wrote:
Jeremy Chadwick wrote:
On Tue, Oct 14, 2008 at 04:55:11AM -0400, Michael Powell wrote:
[snip]
Next, you will want to configure your FreeBSD machine as a NAT gateway.
In your /etc/rc.conf you will want something like
On Wed, Oct 15, 2008 at 08:40:48PM +1000, Da Rock wrote:
On Tue, 2008-10-14 at 06:46 -0400, Michael Powell wrote:
Jeremy Chadwick wrote:
On Tue, Oct 14, 2008 at 04:55:11AM -0400, Michael Powell wrote:
[snip]
Next, you will want to configure your FreeBSD machine as a NAT gateway.
FreeBSD 7.0-Release
Intel D975XBX2 motherboard (Intel Matrix Storage Technology)
3 WD Raptor 74 GB in a RAID 5 array
1 WD Raptor 150 GB as a standalone disk
/ and /var mounted on the standalone,, /usr on the RAID 5
I believe what happened was that one of the disks didn't respond for such a
Dear all,
is there any routines to check if some accounts expire then system would
like to do backup all data to certain directory and then delete the account.
Any help would be appreciate.
Thank you
Kalpin Erlangga Silaen
___
Not much return on freebsd-isp.
I try again here on freebsd-questions.
Original-Nachricht
Betreff: Suhosin Segmentation Fault
Datum: Mon, 13 Oct 2008 09:49:09 +0200
Von: Alain Wolf [EMAIL PROTECTED]
An: [EMAIL PROTECTED]
Newsgruppen: gmane.os.freebsd.isp
After upgrading FreeBSD
Hello!
On Wed, Oct 15, 2008 at 10:32 AM, Jeremy Chadwick [EMAIL PROTECTED] wrote:
On Wed, Oct 15, 2008 at 10:02:44AM +0200, Artifex Maximus wrote:
I would like to upgrade my curl to the latest 7.19.0 version because
it is fixes some problems that 7.18.0 has. I would like to upgrade via
ports
I'm installing 7.0-RELEASE on a Sun Sunfire v100 server. I was able to
boot the cd, and install through cd one. There is no framebuffer on the
v100 (vt100 serial console interface only) so the install would not
proceed past the first disk. I want to use this system as a nameserver
and was able to
On Wed, Oct 15, 2008 at 02:32:25PM +0200, Jon Theil Nielsen wrote:
Dear list,
Something happened that I don't think should be possible. I lost all three
disks in my RAID 5 array simultaneously after approx. two years without any
problem. And I fear I will never see my data again. But I
On Wed, Oct 15, 2008 at 04:12:55AM -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 10:24:27AM +1000, Da Rock wrote:
I've been getting a lot of rejections: Helo command rejected: Host not
found (in reply to RCPT TO command). So now I'm running a test to see if
this one will get
On Wed, Oct 15, 2008 at 01:40:45PM +0200, Wojciech Puchar wrote:
One thing worth trying would be to disable MSI/MSI-X. You can disable
these by adding the following to your /boot/loader.conf :
hw.pci.enable_msix=0
hw.pci.enable_msi=0
what's wrong in MSI interrupts?
Nothing -- but there
I love the direction this thread has taken. First, humorous,
then it
will turn into flames. I bet all my US$:-)
Unfortunately that doesn't really offer much value anymore with
the
recent market downturn- got anything else to
On Wed, Oct 15, 2008 at 10:14:42AM +0100, Dieter wrote:
FreeBSD 7.0-Release
Intel D975XBX2 motherboard (Intel Matrix Storage Technology)
3 WD Raptor 74 GB in a RAID 5 array
1 WD Raptor 150 GB as a standalone disk
/ and /var mounted on the standalone,, /usr on the RAID 5
I believe what
On Wed, Oct 15, 2008 at 07:26:36PM +0200, Aniruddha wrote:
On Wed, 2008-10-15 at 07:43 -0700, Jeremy Chadwick wrote:
Now you need to rebuild the kernel and install the kernel. In this
scenario, when building the kernel DO NOT use any -j flags, as if the
driver doesn't build, you'll be
On Wed, Oct 15, 2008 at 07:25:08PM +0200, Alain Wolf wrote:
Not much return on freebsd-isp.
I try again here on freebsd-questions.
Original-Nachricht
Betreff: Suhosin Segmentation Fault
Datum: Mon, 13 Oct 2008 09:49:09 +0200
Von: Alain Wolf [EMAIL PROTECTED]
An: [EMAIL
Jeremy Chadwick wrote:
Suhosin is not an extension you load in extensions.ini; it's a patch
applied to the core of PHP.
% grep suhosin /usr/local/etc/php/extensions.ini
extension=suhosin.so
It's both a set of patches to the PHP core, and a loadable module.
Cheers,
Matthew
On Wed, Oct 15, 2008 at 08:26:09PM +0100, Matthew Seaman wrote:
Jeremy Chadwick wrote:
Suhosin is not an extension you load in extensions.ini; it's a patch
applied to the core of PHP.
% grep suhosin /usr/local/etc/php/extensions.ini
extension=suhosin.so
It's both a set of patches to the
On Wed, Oct 15, 2008 at 2:35 PM, Jeremy Chadwick [EMAIL PROTECTED] wrote:
On Wed, Oct 15, 2008 at 08:26:09PM +0100, Matthew Seaman wrote:
Jeremy Chadwick wrote:
Suhosin is not an extension you load in extensions.ini; it's a patch
applied to the core of PHP.
% grep suhosin
Hi, all--
On Oct 15, 2008, at 12:47 PM, Matt wrote:
It's been a while since I've looked at the suhosin options and I can't
remember what the differences are between the extension and the
core-php patch.
If you check the following, they discuss the difference in protection
between using just
On 15.10.2008 20:55, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 07:25:08PM +0200, Alain Wolf wrote:
Not much return on freebsd-isp.
I try again here on freebsd-questions.
Original-Nachricht
Betreff: Suhosin Segmentation Fault
Datum: Mon, 13 Oct 2008 09:49:09 +0200
On Wed, Oct 15, 2008 at 02:47:00PM -0500, Matt wrote:
On Wed, Oct 15, 2008 at 2:35 PM, Jeremy Chadwick [EMAIL PROTECTED] wrote:
On Wed, Oct 15, 2008 at 08:26:09PM +0100, Matthew Seaman wrote:
Jeremy Chadwick wrote:
Suhosin is not an extension you load in extensions.ini; it's a patch
On Wed, Oct 15, 2008 at 10:02:46PM +0200, Aniruddha wrote:
On Wed, 2008-10-15 at 11:49 -0700, Jeremy Chadwick wrote:
How exactly did you download the URLs I gave you?
Can you show me what's on line 241 of if_msk.c?
A 'grep ^#include if_msk.c' for me returns lines which only include
On Wed, Oct 15, 2008 at 10:01:13PM +0200, Alain Wolf wrote:
On 15.10.2008 20:55, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 07:25:08PM +0200, Alain Wolf wrote:
Not much return on freebsd-isp.
I try again here on freebsd-questions.
Original-Nachricht
Betreff:
Hello,
I am not sure if I should be here or over at a pf specific list but here
is my problem.
I am trying my hand at pf on a 7.0-p5 RELEASE box and one rule is giving
me problems.
pass in quick on $ext_if proto tcp from any to any port 22 flags S/SA \
(max-src-conn 15,
My personal approach to avoiding data loss is (a) avoid buggy things like
inthell and linux.
Interesting, being as we have another thread going as of late that seems
to link transparent data loss with AMD AM2-based systems with certain
models of Adaptec and possibly LSI Logic controller
On Wed, Oct 15, 2008 at 12:00:50PM -0500, Peter Clark wrote:
Hello,
I am not sure if I should be here or over at a pf specific list but here
is my problem.
I am trying my hand at pf on a 7.0-p5 RELEASE box and one rule is giving
me problems.
pass in quick on $ext_if proto tcp from
Da Rock wrote:
Been having trouble posting with a new mail server (only to your server
mind)- just trying sort it out.
Cheers
Please consider sending these to the freebsd-test mailing list, as it is
made for test posts.
___
Jeremy Chadwick wrote:
You are supposed to use one or the other: the patch, or the extension.
Nope, they can be used alone or mixed together (I use both on my
servers). For a detailed explanation see:
http://www.hardened-php.net/suhosin/why.html
I'm CC'ing ale@ on this thread, because
Norberto Meijome wrote:
Hi,
FreeBSD ayiin.octantis.com.au 7.1-PRERELEASE FreeBSD 7.1-PRERELEASE #94: Wed
Oct 15 09:46:16 EST 2008
[EMAIL PROTECTED]:/usr/obj/usr/src/sys/AYIIN i386
I've noticed when /usr becomes full (due to a large port build or other
reasons) that my computer becomes
Hello,
I have in my pf.conf:
pass in proto tcp from !ABUSERS to any port www flags S/SA synproxy state
(max-src-conn 20, max-src-conn-rate 30/60, overload ABUSERS flush global)
and it seems to work just fine...
Regards,
Yury.
On Wed, Oct 15, 2008 at 7:00 PM, Peter Clark [EMAIL PROTECTED]
On Wed, Oct 15, 2008 at 01:28:43PM +0100, Dieter wrote:
My personal approach to avoiding data loss is (a) avoid buggy things like
inthell and linux.
Interesting, being as we have another thread going as of late that seems
to link transparent data loss with AMD AM2-based systems with
Yury Michurin wrote:
Hello,
I have in my pf.conf:
pass in proto tcp from !ABUSERS to any port www flags S/SA synproxy
state (max-src-conn 20, max-src-conn-rate 30/60, overload ABUSERS
flush global)
and it seems to work just fine...
Regards,
Yury.
On Wed, Oct 15, 2008 at 7:00 PM, Peter
On Wednesday 15 October 2008, Davenport, Steve M [EMAIL PROTECTED]
sent a missive stating:
I'm installing 7.0-RELEASE on a Sun Sunfire v100 server. I was able to
boot the cd, and install through cd one. There is no framebuffer on the
v100 (vt100 serial console interface only) so the install
Dear Customer,
It has been brought to our attention that some or all of the information
associated with your domain name FREEBSD.ORG is outdated or incorrect.
These types of complaints are brought to our attention in one of two
ways.
The most common type of complaint is
--- On Wed, 10/15/08, Davenport, Steve M [EMAIL PROTECTED] wrote:
From: Davenport, Steve M [EMAIL PROTECTED]
Subject: new install sunfire v100
To: freebsd-questions@freebsd.org
Date: Wednesday, October 15, 2008, 1:53 PM
I'm installing 7.0-RELEASE on a Sun Sunfire v100 server.
I was able to
On Wed, Oct 15, 2008 at 04:24:21PM +0200, Aniruddha wrote:
On Wed, 2008-10-15 at 21:09 +0900, PYUN Yong-Hyeon wrote:
This controller is known to buggy one. See below.
[...]
Trying to mount root from ufs:/dev/ad16s3a
WARNING: / was not properly dismounted
I like Intel as much as I like AMD
That is your right. Inthell has a long history of buggy products,
attempting to hide/ignore bugs, poor customer support, outright
theft, etc. AMD isn't perfect, but the list of bad things is far
far shorter. And there are other companies to
Unless the question is as broad as 'how do I learn about FreeBSD' it
is worthwhile to help the person aim that shotgun or exchange it
for a rifle.
Interesting analogy- I like it :)
___
freebsd-questions@freebsd.org mailing list
On Wed, 2008-10-15 at 04:10 -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 08:40:48PM +1000, Da Rock wrote:
On Tue, 2008-10-14 at 06:46 -0400, Michael Powell wrote:
Jeremy Chadwick wrote:
On Tue, Oct 14, 2008 at 04:55:11AM -0400, Michael Powell wrote:
[snip]
Next,
Before I go off rashly and join another mailing list or two, might I
enquire here regarding the difference between virtual alias' and virtual
mailboxes from mailman's point of view? I've been googling, but I'm as
confused as ever...
What I have is vmailboxes on postfix (with a courier frontend)
Hi,
I'm getting these on my HP-DL165 AMD Quad Qore
interrupt storm detected on irq10:; throttling interrupt source
interrupt storm detected on irq10:; throttling interrupt source
interrupt storm detected on irq10:; throttling interrupt source
interrupt storm detected on irq10:; throttling
2008/10/15 Nejc Skoberne [EMAIL PROTECTED]
Hello,
the drives to the other machine and try to make them online again. Do you
think I should try?
If I were you, I would first buy/get a XXX GB SATA drive, create a
filesystem there
and copy all three disks block-by-block as three separate
--- On Wed, 10/15/08, nazir [EMAIL PROTECTED] wrote:
From: nazir [EMAIL PROTECTED]
Subject: Interrupt storm detected on irq10:; throttling interrupt source
To: freebsd-questions@freebsd.org
Date: Wednesday, October 15, 2008, 8:44 PM
Hi,
I'm getting these on my HP-DL165 AMD Quad Qore
On Thu, Oct 16, 2008 at 10:15:49AM +1000, Da Rock wrote:
On Wed, 2008-10-15 at 04:10 -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 08:40:48PM +1000, Da Rock wrote:
On Tue, 2008-10-14 at 06:46 -0400, Michael Powell wrote:
Jeremy Chadwick wrote:
On Tue, Oct 14, 2008
On Wed, Oct 15, 2008 at 06:17:56PM -0700, mdh wrote:
--- On Wed, 10/15/08, nazir [EMAIL PROTECTED] wrote:
From: nazir [EMAIL PROTECTED]
Subject: Interrupt storm detected on irq10:; throttling interrupt source
To: freebsd-questions@freebsd.org
Date: Wednesday, October 15, 2008, 8:44 PM
On Wed, 2008-10-15 at 21:19 -0700, Jeremy Chadwick wrote:
On Thu, Oct 16, 2008 at 10:15:49AM +1000, Da Rock wrote:
On Wed, 2008-10-15 at 04:10 -0700, Jeremy Chadwick wrote:
On Wed, Oct 15, 2008 at 08:40:48PM +1000, Da Rock wrote:
On Tue, 2008-10-14 at 06:46 -0400, Michael Powell
--- On Thu, 10/16/08, Da Rock [EMAIL PROTECTED] wrote:
From: Da Rock [EMAIL PROTECTED]
Subject: Re: How to get my Dad's Win2k system to access internet through my
FreeBSD 6.2 system
To: freebsd-questions@freebsd.org
Date: Thursday, October 16, 2008, 1:04 AM
grin Actually I'm not sure...
84 matches
Mail list logo
