Hello,
I've started an Apache bechmark with ab today and a lot of such
messages from kernel appeared in /var/log/messages:
Sep 25 16:16:34 dev01 kernel: Limiting closed port RST response from
270 to 200 packets/sec
Sep 25 16:19:10 dev01 kernel: Limiting closed port RST response from
475 to 200 pa
Hello,
I'm trying to keep very close touch with 6.1_STABLE cvsupping sources
once a week or even more often. I'm thinking of removing as much as
possible devices from the kernel loading them from /boot/loader.conf
instead, so I could rebuild and install them without a whole
kernel/world rebuild a
On 12/11/06, Lowell Gilbert <[EMAIL PROTECTED]> wrote:
"Vlad GURDIGA" <[EMAIL PROTECTED]> writes:
> I'm trying to keep very close touch with 6.1_STABLE cvsupping sources
> once a week or even more often. I'm thinking of removing as much as
> possible
Hello,
My motherboard Intel D955XBK died these day, I took it to service
center and they gave me a new one of another model: DP965LT.
On my home computer I have dual boot with Windows XP and FreeBSD
6.2-STABLE. I've expected Windows XP not to boot at all after the
change, but fortunately it succe
-- Forwarded message ------
From: Vlad GURDIGA <[EMAIL PROTECTED]>
Date: 15-Mar-2007 10:20
Subject: pause before "Trying to mount root from ufs:"
To: freebsd-questions@freebsd.org
Hello,
My motherboard Intel D955XBK died these day, I took it to service
center and the
Hello,
I've changed motherboard recently (now it is Intel DP965LT) and now I
have my PC slowed down considerably. vmstat -i shows a huge amount of
interrupts on irq17: atapci0:
interrupt total rate
irq1: atkbd0 12535 4
irq12: psm0
On 25/03/07, Josh Carroll <[EMAIL PROTECTED]> wrote:
> I've changed motherboard recently (now it is Intel DP965LT) and now I
> have my PC slowed down considerably. vmstat -i shows a huge amount of
> interrupts on irq17: atapci0:
Do you have atapicam enabled or being loaded as a module?
No, I d
After running this:
/sbin/atacontrol reinit ata2
the storm was gone.
My HDD in on ata4:
#atacontrol info ata4
Master: ad8 Serial ATA II
Slave: no device present
Why?
On 25/03/07, Vlad GURDIGA <[EMAIL PROTECTED]> wrote:
On 25/03/07, Josh Carroll <[EMAIL PROTECTE
On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote:
Vlad GURDIGA wrote:
> After running this:
>
> /sbin/atacontrol reinit ata2
>
> the storm was gone.
> My HDD in on ata4:
>
> #atacontrol info ata4
> Master: ad8 Serial ATA II
> Slave: no devic
On 28/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote:
Vlad GURDIGA wrote:
> On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote:
>> Vlad GURDIGA wrote:
>> > On 27/03/07, Sten Daniel Soersdal <[EMAIL PROTECTED]> wrote:
>> >> Vlad
Hello,
My FreeBSD 6.2-STABLE does not recognize the Marvell Technology Group
Ltd. 88SE6101 single-port PATA133 interface on which is attached the
DVD-RW.
As a result (I guess...), I do not have a /dev/acd0 with a GENERIC SMP kernel.
The [verbose] dmesg snippet looks like this:
found-> vendor=0x1
Hello,
"Registering installation for mplayer-0.99.10_9" took about 8 minutes
(at 97% CPU-core load) of CPU time on one of the two cores on my
Pentium D 820 on a system with 1 GiB of RAM and Barracuda SATA drive.
It looks "a little" too long to me...
Is it OK that pkg_create takes so long so much
Hello!
After upgrading to Xorg 7.2 "by the book" (/usr/ports/UPDATING), I
could not switch my keyboard layouts as I did with the previous
version. Even more, I could not switch to text-mode console using
Ctrl-Alt-F1.
After I've regenerated a new xorg.conf using "Xorg -configure", I was
able to sw
Hello,
I've installed beryl today (tried both: from packages and compiled from
updated ports) on a FreeBSD 7-CURRENT.
When I run beryl from console I get this:
# beryl
Something went wrong with Xgl detection.
Something went wrong with Nvidia detection.Something went wrong with system
check.
Whe
-- Forwarded message --
From: Kirk McKusick <[EMAIL PROTECTED]>
Date: 12-Jun-2007 16:49
Subject: Re: Fwd: Installing FreeBSD on large disk >2TB
To: Vlad GURDIGA <[EMAIL PROTECTED]>
Cc: [EMAIL PROTECTED], Kris Kennaway <[EMAIL PROTECTED]>,
Enrique Ayesta Per
-- Forwarded message --
From: Francisco Reyes <[EMAIL PROTECTED]>
Date: 13-Jun-2007 03:42
Subject: Re: Installing FreeBSD on large disk >2TB
To: [EMAIL PROTECTED]
Cc: [EMAIL PROTECTED], Enrique Ayesta Perojo
<[EMAIL PROTECTED]>, Kris Kennaway <[EMAIL PROTECTED]>
There is a simm
Hello,
There is one strange thing going on with this combination. I saw this
many times by now: when fetch(1) is trying to download something from
http://ftp.gnu.org, it is hanging after a very small amount of data;
sometimes on 0%. After disabling pf(4), fetch(1) is not hanging any
more, so I gu
On 15/06/07, Chuck Swiger <[EMAIL PROTECTED]> wrote:
On Jun 14, 2007, at 2:24 PM, Vlad GURDIGA wrote:
>> Presumably you want to make sure that fetch(1) is using:
>>
>> FTP_PASSIVE_MODEIf set to anything but `no', forces the FTP
>> code to
>>
Hello,
I have FreeBSD 7-CURRENT and Ubuntu on the same computer but Firefox
takes twice as long to start on a fresh boot. I've run some simple
tests:
- on FreeBSD it takes about 7 seconds on the first start and about 3
on subsequent startups;
- on Ubuntu it takes about 3 seconds on the first star
Hello,
I have recently tried packaged version 2.2, 2.1 and 2.0 (from
ftp://ooopackages.good-day.net) and the editors/openoffice.org-2-devel
port but none of them worked. The packaged versions core dump with
many error mesages like these:
kpax# openoffice.org-SRC680_m200-swriter
Fatal error 'Exce
On 22/06/07, Norberto Meijome <[EMAIL PROTECTED]> wrote:
On Thu, 21 Jun 2007 22:50:25 +0300
"Vlad GURDIGA" <[EMAIL PROTECTED]> wrote:
> On 18/06/07, Norberto Meijome <[EMAIL PROTECTED]> wrote:
> > On Sun, 17 Jun 2007 10:24:21 +0300
> > "Vlad GURD
On 22/06/07, Nikos Vassiliadis <[EMAIL PROTECTED]> wrote:
On Friday 22 June 2007 14:23, Vlad GURDIGA wrote:
> I'm afraid my background in this area is too thin to go that far...
-CURRENT is for developers or users who want to contribute in
the development process of FreeBSD. And a
Hello all,
I have a FreeBSD 6-current build from almost the most recent source.
I have installed mysql41-server port and observed a strange behaviour:
as usual, I only have to put the mysqld_enable="yes" in my
/etc/rc.conf to have mysql server started at boot, but this time it
did not work. I've c
Hello,
I've changed my hardware lately and cannot find the driver for sound
card. My motherboard is an Intel D955XBK with on board Sigmatel 9221
audio. On Windows it plays, so, the hardware part is fine.
Also cannot find the driver for my new video card: PCI Express x16
ASUS ATI RADEON X550 GE.
Hello all,
I have these slices on my HDD:
- /dev/ad0s1 - Windows XP
- /dev/ad0s2 - FreeBSD/i386
- /dev/ad0s3 - FreeBSD/amd64
and I want them all in my boot.ini.
Till now I succeeded with FreeBSD/i386 (first did "dd if=/dev/ad0s2
of=boot.bsd bs=512 count=1" from FreeBSD/i386, then copied the
res
Hello,
I got 2x512 MB DDR2 (240) PC5300 667MHZ CL5.0 TWINMOS on an Intel
D955XBK motherboard with dual channel, and every time on boot I see
this message before the dmesg:
FreeBSD/i386 bootstrap loader, Revision 1.1
([EMAIL PROTECTED], Tue May 9 22:16:44 EEST 2006)
Loading /boot/defaults/load
Hello,
In Google Chrome System requirements
(http://www.google.com/support/chrome/bin/answer.py?answer=95411&topic=14660)
they say that a Linux version is going to appear. And in the "Download
and install" help article
(http://www.google.com/support/chrome/bin/answer.py?answer=95346&query=open-sou
On Wed, Sep 3, 2008 at 12:14 AM, Beech Rintoul <[EMAIL PROTECTED]> wrote:
> On Tuesday 02 September 2008, Vlad GURDIGA said:
>> Hello,
>>
>> In Google Chrome System requirements
>> (http://www.google.com/support/chrome/bin/answer.py?answer=95411&to
>>
Hello,
I've run today "freebsd-update fetch" and it found some updates,
including /boot/kernel/kernel:
The following files will be updated as part of updating to 7.0-RELEASE-p4:
/boot/kernel/kernel
/boot/kernel/kernel.symbols
/usr/src/sys/amd64/amd64/exception.S
/usr/src/sys/conf/newvers.sh
/usr/
Hello,
I could not figureout the answer to a question. Here is the situation:
PC A: Windows XP Pro.
PC B: FreeBSD 6.1, connected to internet, acting as a gateway for PC
A, with NAT (built by hanbook instructions
http://www.freebsd.org/doc/en_US.ISO8859-1/books/handbook/network-natd.html),
open f
Hello,
I get this error when I try to write (under root) a CD-RW or CD-R as
is found in handbook:
besa# burncd data FC-5-i386-disc1.iso fixate
burncd: ioctl(CDRIOCNEXTWRITEABLEADDR): Input/output error
Here are my (SMP) system details:
besa# uname -a
FreeBSD besa.org 6.1-STABLE FreeBSD 6.1-STA
Hello,
After I do a:
bsd# cvsup ports-supfile
I do a
bsd# pkg_version -vol \<
to see if any of my installed ports have newer versions. After I do a:
bsd# cvsup stable-supfile
is there any way to see the same information for the operating system on a
i386 FreeBSD 6.1-STABLE, smp custom kerne
32 matches
Mail list logo
