Hi everybody,
I've added some code to support VNC Authentication (as much as a 16-byte
DES challenge response could be seen as Authentication) as per
https://tools.ietf.org/html/rfc6143#page-10.
It's my first time working with this reviews thing - I'm a bit unsure
how to set the diff to be based
Hello,
I've overlooked your mail somehow. :( The Windows VM was destroyed
between my attempts and not just rebooted. The problems may have been
caused by VirtualBox. I don't run in parallel with Bhyve, but had a
VirtualBox VM running right before I started my experiments.
Regards,
Yamagi
On Sun,
Hi Yamagi,
XHCI isn't in Windows7 so you can just remove that config line,
pushing mouse input through the PS2 mouse.
That was a little bit strange, it seemed like the emulated ps/2 devices
just wouldn't work on a Win 7 VM. The "atkbd data buffer full" may be
an indication for not delivered
>Hello,
> > As far as I know UEFI supports ahci-* boot devices only. For the basic
> > UEFI support without GOP the AHCI devices needed to be mapped on slot 3
> > and 4. I don't know if that's still the case.
>
> Depends on the o/s being booted - if it needs legacy interrupt
> support, the only
Hello,
> > As far as I know UEFI supports ahci-* boot devices only. For the basic
> > UEFI support without GOP the AHCI devices needed to be mapped on slot 3
> > and 4. I don't know if that's still the case.
>
> Depends on the o/s being booted - if it needs legacy interrupt
> support, the only
On Fri, May 27, 2016 at 10:48:54AM -0700, Michael Dexter wrote:
> On 5/27/16 1:33 AM, Peter Grehan wrote:
> > As of r300829, support for graphic output has been checked into the
> > projects/bhyve_graphics branch...
>
> HUGE thanks to Leon and Peter for making this happen. We all owe them
> our g
On 5/27/16 1:33 AM, Peter Grehan wrote:
As of r300829, support for graphic output has been checked into the
projects/bhyve_graphics branch...
HUGE thanks to Leon and Peter for making this happen. We all owe them
our gratitude as with all things bhyve, this is non-trivial code.
There is a ded
Peter Grehan wrote:
> Hi Roman,
>
> > I've just tried to do a Fedora installation and it worked like a charm.
> >
> > A couple of questions:
> >
> > * There was a limitation that AHCI devices must use slots 3-6. [1]
> >Is it still there? If yes, any plans to get rid of it?
>
> It's not
Hi Roman,
I've just tried to do a Fedora installation and it worked like a charm.
A couple of questions:
* There was a limitation that AHCI devices must use slots 3-6. [1]
Is it still there? If yes, any plans to get rid of it?
It's not a limitation for guests that can use MSI for AHCI.
Peter Grehan wrote:
> As of r300829, support for graphic output has been checked into the
> projects/bhyve_graphics branch. This is just the usr.sbin/bhyve
> executable, so is quick and easy to build from source.
>
> Assuming a reasonably current source tree is in /usr/src,
>svn co http:/
Hi Yamagi,
As far as I know UEFI supports ahci-* boot devices only. For the basic
UEFI support without GOP the AHCI devices needed to be mapped on slot 3
and 4. I don't know if that's still the case.
Depends on the o/s being booted - if it needs legacy interrupt
support, the only available s
Hi Lars,
-s 3:0,virtio-blk,./ubuntu-hd.img \
...
Then I connect with vncviewer but only see this message:
"Boot failed. EFI misc device"
Which Ubuntu version/image is this ?
later,
Peter.
___
freebsd-virtualization@freebsd.org mailing lis
> > > grub-bhyve -m device.map -r hd0,msdos1 -M 4G ubuntu
> > > ~lars/dev/bhyve_graphics/bhyve \
> > > -s 0:0,hostbridge \
> > > -s 1:0,lpc \
> > > -s 2:0,virtio-net,tap1 \
> > > -s 3:0,virtio-blk,./ubuntu-hd.img \
> > > -s 11,fbuf,tcp=0.0.0.0:5900,w=1280,h=720,wait \
> > >
On Fri, May 27, 2016 at 09:11:16PM +1000, Jason Tubnor wrote:
> On 27 May 2016 8:44 PM, "Lars Engels" wrote:
> >
> >
> > downloading the UEFI image I start Ubuntu like this:
> >
> > grub-bhyve -m device.map -r hd0,msdos1 -M 4G ubuntu
> > ~lars/dev/bhyve_graphics/bhyve \
> > -s 0:0,hostbridge \
On 27 May 2016 8:44 PM, "Lars Engels" wrote:
>
>
> downloading the UEFI image I start Ubuntu like this:
>
> grub-bhyve -m device.map -r hd0,msdos1 -M 4G ubuntu
> ~lars/dev/bhyve_graphics/bhyve \
> -s 0:0,hostbridge \
> -s 1:0,lpc \
> -s 2:0,virtio-net,tap1 \
> -s 3:0,virtio-blk,./u
On Fri, May 27, 2016 at 01:33:42AM -0700, Peter Grehan wrote:
> As of r300829, support for graphic output has been checked into the
> projects/bhyve_graphics branch. This is just the usr.sbin/bhyve
> executable, so is quick and easy to build from source.
>
> Assuming a reasonably current source
Yes.
-M
On Friday, May 27, 2016, Peter Grehan wrote:
> Cool stuff. FYI new i915 driver has vgpu support, incliuding 3D.
>>
>
> Is that the KVM-GT work ? (https://github.com/01org/KVMGT-kernel)
>
> If so, yes, it would be great to support that in bhyve.
>
> later,
>
> Peter.
>
Cool stuff. FYI new i915 driver has vgpu support, incliuding 3D.
Is that the KVM-GT work ? (https://github.com/01org/KVMGT-kernel)
If so, yes, it would be great to support that in bhyve.
later,
Peter.
___
freebsd-virtualization@freebsd.org mailing
Cool stuff. FYI new i915 driver has vgpu support, incliuding 3D.
On Friday, May 27, 2016, Peter Grehan wrote:
> As of r300829, support for graphic output has been checked into the
> projects/bhyve_graphics branch. This is just the usr.sbin/bhyve executable,
> so is quick and easy to build from s
As of r300829, support for graphic output has been checked into the
projects/bhyve_graphics branch. This is just the usr.sbin/bhyve
executable, so is quick and easy to build from source.
Assuming a reasonably current source tree is in /usr/src,
svn co http://svn.freebsd.org/base/projects/bhyv
20 matches
Mail list logo
