I am having trouble setting up the nic on my Intel D845PEBT2 motherboard
to access a Netware 4.11 server. I'm trying to install the 16 bit dos
client under Freedos 1.0. I am using a student kit. I get an error
when I boot that the LOAD command can't be found and I find I am without
the upper
All I have drivers for is netware. I have an Intel D845PEBT2 mobo with
built-in 10/100/1000 Intel nic. I've tried to run Netware 4.11 student
edition install with no luck. I have odipkt installed, but I don't seem
to have any utilties to check the configuration of the network card.
What is the outlook for freedos 1.1? I'd like to see improved stability
overall, better networking options, and integration of the package
manager into a gui. Gem is great because it is light and that's what
freedos should be, light on resource use. I think there should be
some discussion on
I'm surprised that noone has talked about XOSL. I used it to hide the
primary partition of freedos so I could install Windows 98 SE. It has
been so long, I can't remember if I used a 98 boot floppy to get around
the you only have 16 megs of memory issue or not. I know that I created
a dedicated
Has anyone gotten Jeff Vavasour's coco 3 emulator to work at all
in freedos? I believe that the source code is freely available.
http://www.vavasour.ca/jeff/trs80.html
Optimal system requirements for the CoCo 3 Emulator are VGA
compatibility, 429K of low DOS memory free and 384K of free EMS.
On Mon, 2008-09-22 at 12:50 -0500, Jim Hall wrote:
On Sat, Sep 20, 2008 at 9:05 PM, robinson-west user
[EMAIL PROTECTED] wrote:
http://www.vavasour.ca/jeff/trs80.html
I get an error from freedos's emm386.exe. Has anyone gotten this
emulator to work under Freedos? I have trouble getting
http://www.vavasour.ca/jeff/trs80.html
I get an error from freedos's emm386.exe. Has anyone gotten this
emulator to work under Freedos? I have trouble getting it to work
in MS-DOS 6.22 also, when I try to run it, the computer reboots.
I think it was designed for MS-DOS 3.3. The emulator is
Populous II won't install under Freedos, but it will run.
Wolfenstein 3D will install, but it's not playable.
Same for blake stone aliens of gold.
Underworld works and installs, except I can't get speech to work.
Chuck Yeager's air combat doesn't work.
Ultima VII doesn't work, don't know why,
On Mon, 2008-08-25 at 22:35 -0500, Mike Webb wrote:
Date: Mon, 18 Aug 2008 12:05:05 -0700
From: robinson-west user [EMAIL PROTECTED]
I have a Tandy Color Computer 3. My 5.25 floppies are mostly dead.
What I'm wondering is, beyond software to read COCO disks under dos is
there software
Just to name two more popular examples. I guess there are more homebrew
made solutions out there...
All the best,
Wolfram
So how do I do serial programming under Freedos? Where would I look for
information on how to do this? I could start out perhaps by programming
two Freedos PCS
What is the latest on Freedos 1.1? A new installer, updated packages,
and the addition of fdupdate. Is significant work being done?
I notice that there is a call to action on the freedos web site, so
status wise what is happening?
Michael C. Robinson
I have a Tandy Color Computer 3. My 5.25 floppies are mostly dead.
What I'm wondering is, beyond software to read COCO disks under dos is
there software that will allow me to replace the disk drives via a
serial link to my dos machine? There is Drivewire, but I think it is
designed for Windows.
Are there any freedos compatible programs to test
my Intel D845PEBT2 motherboard? I'm having trouble
getting Fedora Core 9 to work on it. Dirk Dashing
randomly slows way down. I'm also having sound
problems. I'm wondering if this is a software
issue, but I can't rule out hardware failure.
A bug fixed 1.0 with broader network card support via crynwr or a
porting of the Linux network drivers would be great. Another thing
I'd like is a way to increase the resolution in opengem.
Another thing I'd like to see is a decoupling of arachne's pop client
as some people, like me, use imap.
Is it still stalled for the forseeable future?
-
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse012070mrt/direct/01/
I would like to see programs written to work with GEM directly.
Updating
FDPKG to work through GEM would be really neat. GEM is beautifully
simple.
I don't know about turbovision etcetera, but how hard would it be to
build
the installer on top of opengem? Talk of needing a dos extender gui to
Seven days left in April, is freedos 1.1 going to come out?
Michael Robinson
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
How is it coming along?
Michael Robinson
-
This SF.net email is sponsored by the 2008 JavaOne(SM) Conference
Don't miss this year's exciting event. There's still time to save $100.
Use priority code J8TL2D2.
I could get it to work under vmware with wget believe it or not,
but I haven't gotten it to work on real hardware even with curl.
Another problem I've noticed is that fdupdate doesn't seem to
record the new version of a package that it has updated.
My 486 is passing memtest with flying colors.
On Fri, 2008-02-15 at 21:00 +0100, Mateusz Viste wrote:
On Friday 15 February 2008, robinson-west user wrote:
I could get it to work under vmware with wget believe it or not,
but I haven't gotten it to work on real hardware even with curl.
Do your real hardware can run anything more than
How do I use curl with freedos update? The first trick was finding
curl. Copying curl over wget prevents fdupdate from crashing, but
it doesn't make the updater work. On the todo list there is make
fdupdate able to use curl, is there a post 0.52 update?
ulimit(fdupdate.tab) EIO error input/output error...
My freedos update locks up and I've noticed something similar to the
above error. Is there supposed to be a ulimit executable? Is there
supposed to be an installation of djgpp for wget to work?
I'm on a 486 DX2 66 EISA bus, no VLB. 20 megs of SIMM ram, 30 pin.
Is there a copy of memtest86+ for freedos, it would be silly if this
turned out to be a bad memory problem.
autoexec.bat:
---
@echo off
if not %config% == 4
23 matches
Mail list logo
