but don't know where to type this command.
Can you help?
Mel
--- On Tue, 2/7/12, Dan dantear...@gmail.com wrote:
From: Dan dantear...@gmail.com
Subject: Re: exceded maximum B tree depth
To: g3-5-list@googlegroups.com
Date: Tuesday, February 7, 2012, 6:54 AM
At 9:42 PM -0800 2/6/2012, Mel wrote
OK, I get it.
I'm also going to try using DiskWarrior.
--- On Tue, 2/7/12, Dan dantear...@gmail.com wrote:
From: Dan dantear...@gmail.com
Subject: Re: exceded maximum B tree depth
To: g3-5-list@googlegroups.com
Date: Tuesday, February 7, 2012, 11:13 AM
At 10:22 AM -0800 2/7/2012, Mel wrote
and two different external drives.
Once again, thanks to the experience and knowledge offered by the group members.
Mel
--- On Tue, 2/7/12, Mel mll...@yahoo.com wrote:
From: Mel mll...@yahoo.com
Subject: Re: exceded maximum B tree depth
To: g3-5-list@googlegroups.com
Date: Tuesday, February 7, 2012
I've spent bout 20 hours using DiskWarrior to restore directories on various
volumes. It works well.
--- On Tue, 2/7/12, Cameron Kaiser spec...@floodgap.com wrote:
From: Cameron Kaiser spec...@floodgap.com
Subject: Re: exceded maximum B tree depth
To: g3-5-list@googlegroups.com
Date: Tuesday,
, 2011 from Alsoft.
Before I use Disk Warrior, are there any pitfalls I should be aware of?
Thanks in advance.
Mel
--~--~-~--~~~---~--~~
You received
this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs
Bill,
Thanks. I'll give it a try.
Mel
--- On Sun, 1/8/12, Bill Connelly billycarmac...@verizon.net wrote:
From: Bill Connelly billycarmac...@verizon.net
Subject: Re: Firefox
To: g3-5-list@googlegroups.com
Date: Sunday, January 8, 2012, 8:13 AM
On Jan 7, 2012, at 11:08 PM, Mel wrote:
I
and
will save your advice to try later.
Alternatively, I might switch to an older version of Firefox rather than
continue to use TFF.
Mel
--- On Sat, 1/7/12, Kris Tilford ktilfo...@cox.net wrote:
From: Kris Tilford ktilfo...@cox.net
Subject: Re: Firefox
To: g3-5-list@googlegroups.com
Date
I don't see any address bar in TFF. Where is it?
--- On Fri, 1/6/12, Tina K. penguir...@gmail.com wrote:
From: Tina K. penguir...@gmail.com
Subject: Re: Firefox
To: g3-5-list@googlegroups.com
Date: Friday, January 6, 2012, 11:18 PM
On 2012/01/06 19:00, Mel so eloquently wrote:
How does one
I tried that, setting up the HTML5 trial at YouTube. It doesn't work.
Maybe I did something wrong.
Mel
--- On Fri, 1/6/12, David W. Morris bbh...@gmail.com wrote:
From: David W. Morris bbh...@gmail.com
Subject: Re: Firefox
To: g3-5-list@googlegroups.com
Date: Friday, January 6, 2012, 6:21 PM
How does one enable plugins on TFF so that flash will work?
Mel
--- On Fri, 1/6/12, Kris Tilford ktilfo...@cox.net wrote:
From: Kris Tilford ktilfo...@cox.net
Subject: Re: Firefox
To: g3-5-list@googlegroups.com
Date: Friday, January 6, 2012, 5:23 PM
On Jan 6, 2012, at 3:02 PM, Stephen Conrad
OK. But where is the address bar?
Mel
--- On Sat, 10/1/11, Lawrence David Eden lde...@comcast.net wrote:
From: Lawrence David Eden lde...@comcast.net
Subject: Re: TenFourFox
To: g3-5-list@googlegroups.com
Date: Saturday, October 1, 2011, 10:49 AM
Yes, you have to enable plugins. I just
I can't answer your question as to which CPU would be better but are you not
aware that SDRAM 512 RAM 133 buss speed is very inexpensive for the DA - and
can be bought for between $10.00 and $15.00 a stick? Try the LEM list.
Mel
--- On Tue, 3/15/11, Scotty daniel.stewart...@gmail.com wrote
Just a suggestion as I am not familiar with Safari.
Download a fresh version (4.0.5) of Safari. Perhaps you will get two versions
of Safari after the downoald is finished. Try running the newer download. It
it runs to your satisfaction, try to delete Safari (original).
--- On Mon, 1/10/11,
Why would partitioning and installing the system on the 60GB partition speed
up the compute?
Mel
--- On Sun, 11/21/10, Geke gevangaste...@googlemail.com wrote:
From: Geke gevangaste...@googlemail.com
Subject: G4 450mhz dual
To: G-Group g3-5-list@googlegroups.com
Date: Sunday, November 21, 2010
What ill save data is backing data on an external (or internal second HD) at
least once a month. Using CCC is a cinch to do that and usual takes a very
short time.
Mel
--- On Wed, 11/3/10, Tina K. penguir...@gmail.com wrote:
From: Tina K. penguir...@gmail.com
Subject: Re: Dead Drive? - Group
If one had to provide a reason why it works on one Mac and not on another Mac
of the same model, It seems more likely that it is not the difference between
or among similar models Macs but the different applications used by the persons
attempting to implement the changes.
I suggest that those
Regarding entering these three:
reset-nvram (enter)
set-defaults (enter)
reset-all (enter)
What do you enter them into?
I'm using a used DP 533 G4 DA 1.5 MB DRAM that so far is trouble free.
Mel
--- On Wed, 3/3/10, gifutiger gifuti...@gmail.com wrote:
From: gifutiger gifuti...@gmail.com
, that spinning clock will be
replaced by the familiar mouse arrow. Select the HD you want to boot from and
then click on the fixed arrow to the right. If the HD selected has a bootable
OS, the machine should boot.
Mel
--- On Sat, 2/20/10, slvrmoonti...@yahoo.com slvrmoonti...@yahoo.com wrote
You should be able to buy a used and sometimes new external floppy drive that
connects via your USB port. They have been offered for sale from time to time
for about $5.00 to $15.00 plus shipping off the L.E.M. swap list.
--- On Mon, 2/15/10, Richard Gerome onecoolka...@earthlink.net wrote:
and supporting application software are stable, are
fairly bug free and easily support a host of 'needs':
OS 6.0.8 (IIci);
OS 9.2 (7300, G3, G4),
OS 10.4.11 (G3, G4 and 7300 using XPostFacto).
Mel
--- On Thu, 1/21/10, Mac User #330250 macuser330...@gmx.net wrote:
From: Mac User #330250
Perhaps it would be more desirable not to schedule CCC but initiate it manually.
MS
--- On Wed, 1/6/10, Jeffrey Engle macgu...@gmail.com wrote:
From: Jeffrey Engle macgu...@gmail.com
Subject: Re: Time machine or CCC?
To: g3-5-list@googlegroups.com
Date: Wednesday, January 6, 2010, 8:05 AM
On
ones data
and software and thereafter resting more easily.
Mel
--- On Fri, 1/1/10, Dana Collins
dlcatft...@verizon.net wrote:
From: Dana Collins dlcatft...@verizon.net
Subject: Re: Happy New Year!
To: g3-5-list@googlegroups.com
Date: Friday, January 1, 2010, 10:00 AM
On 1/1/10 11:26 AM, Dan
Before you do anything, consider downloading Carbon Copy Cloner and using
that to accomplish what you want to do.
--- On Sun, 12/20/09, Jim McGee orb...@dslextreme.com wrote:
From: Jim McGee orb...@dslextreme.com
Subject: Re: Can I erase one hard drive ?
To: g3-5-list@googlegroups.com
Date:
I used XPostFacto to install OS 10.2 in a 7300-180 and then used a normal
download to upgrade to 10.2.8. Ran it for three plus years with no problems
before phasing out the 7300 for a G4 Sawtooth in which I installed 10.4.11.
Mel
--- On Sat, 12/19/09, Jorge Quiroz jorjo.under.my.s
I think you will be crippled without firewire.
Maybe. How can you know?
I don't use firewire on my G4 DA and am certainly not crippled by that omission.
Mel
--- On Sat, 12/19/09, Jonas Ulrich jonasulrich3...@gmail.com wrote:
From: Jonas Ulrich jonasulrich3...@gmail.com
Subject: Re:
To: g3-5
to restore the original
configuration or to install both if ossible and when one of the two dies use
the alternative.
Mel
--- On Sat, 12/19/09, Jonas Ulrich jonasulrich3...@gmail.com wrote:
From: Jonas Ulrich jonasulrich3...@gmail.com
Subject: Re:
To: g3-5-list@googlegroups.com
Date: Saturday, December
Yes and after the first such back up, the subsequent backups usually complete
in less than six minutes when backing up about 14 GB of software and data
which is all I carry on my 533 DP G4 DA running under OS 10.4.11.
--- On Fri, 11/13/09, Dan dantear...@gmail.com wrote:
From: Dan
as instructed and follow the instructions for copying
from the Master HD to the slave HD.
After CCC finishes (it might take anywhere from 20 minutes to close to an hour)
, you should be able to boot from your slave HD by gooong to Systems
Preferences and selecting the slave HD.
Good luck.
Mel
Also remove all the 900 memory and try booting with just that DIMM. If it
works, then add the 900 memory.
Mel
--- On Sat, 10/10/09, Len Gerstel lgers...@gmail.com wrote:
From: Len Gerstel lgers...@gmail.com
Subject: Re: RAM doesn't work
To: g3-5-list@googlegroups.com
Date: Saturday, October
I've swapped boot HDs and booted the receiving CPU without incident
several times among various G4s
Mel, did your app worked after this? Would transferring just the
application folder from one machine to another result
===
That is a different question. All 'my' Apps worked in all the G4s
the boot process. It should boot your CPU.
When it does, shut it down and RR which ever HD you choose to the other CPU,
remembering, if you choose the slave drive to RR to convert it into a master.
Then boot from that other HD. It should work.
Mel
--- On Wed, 9/23/09, mkehoe mirake
to another
To: g3-5-list@googlegroups.com
Date: Wednesday, September 23, 2009, 2:34 PM
On Sep 23, 2009, at 2:19 PM, Mel wrote:
Here is a suggestion that I believe will be better for you.
Have you considered buying a used second HD.
If you do, install it as a slave in your current CPU. Use
I'm not sure about the sleep problem and this is a wild stab; but some of the
ATTO series such as the 320 SCSI UL3D card might work.
--- On Tue, 9/1/09, Clark Martin cm...@sonic.net wrote:
From: Clark Martin cm...@sonic.net
Subject: Re: Ultra-SCSI on a G4
To: g3-5-list@googlegroups.com
Date:
Or use CCC (Carbon Copy Cloner) to achieve the same result.
Mel
--- On Mon, 8/24/09, Robert Menes viewtiful.icc...@gmail.com wrote:
From: Robert Menes viewtiful.icc...@gmail.com
Subject: Re: Installing new internal hard drive on G4
To: g3-5-list@googlegroups.com
Date: Monday, August 24, 2009
=
What 1.6Mhz processor upgrade did you install on your DA?
Mel
--~--~-~--~~~---~--~~
You received this message because you are subscribed Low End Mac's G3-5 List, a
group for those using G3, G4, and G5 desktop Macs - with a particular focus on
Power Macs
no load volts. Now it gains about 15
seconds each day.
The old battery tested at zero volst - no measurable voltage yet the IIci
booted and ran all functions with that flat battery. Great machine for what I
use it for.
Mel
--~--~-~--~~~---~--~~
You
for the
arrow to appear.
Mel
--- On Wed, 5/20/09, insightinmind billycarm...@verizon.net wrote:
From: insightinmind billycarm...@verizon.net
Subject: Re: My Ethernet Duel G4 want start after updating.
To: g3-5-list@googlegroups.com
Date: Wednesday, May 20, 2009, 4:59 AM
But another
Add to that the fact the guv'ment will spend $10,000 to bust a $100 crime...
Laws are like cobwebs, which may catch small flies, but let wasps and hornets
break through. Jonathon Swift (1667 to 1745)
Mel
--- On Mon, 5/11/09, James E. Therrault jetas...@worldnet.att.net wrote:
From: James E
I too had the same result (using OS 10.4.11 on a dual 533 MHz G4 DA).
--- On Sat, 5/9/09, Dan dantear...@gmail.com wrote:
From: Dan dantear...@gmail.com
Subject: New Flip4Mac is broken?
To: g3-5-list@googlegroups.com
Date: Saturday, May 9, 2009, 9:51 AM
Apparently the new release of Flip4Mac
How about MacJanitor 1.3, which I believe is the latest version, to run the
cron scripts?
BTW: I run all tasks using MacJanitor at least twice a week when I am doing
something off line. MacJanitor has taken as little as seven minutes and as
much as 19 minutes to complete.
Mel
--- On Mon, 4
That was most helpful.
Thanks.
Mel
--- On Sat, 4/25/09, Kris Tilford ktilfo...@cox.net wrote:
From: Kris Tilford ktilfo...@cox.net
Subject: Re: MacJanitor
To: g3-5-list@googlegroups.com
Date: Saturday, April 25, 2009, 4:23 PM
On Apr 25, 2009, at 3:53 PM, Mel wrote:
The percentages before 3
back to the percentages prior
to 3:00 AM. I can't state for a certainty that what I saw was indicative of
anything but I am reporting what I saw.
Mel
--- On Sat, 4/25/09, Anne Keller-Smith earth...@ptd.net wrote:
From: Anne Keller-Smith earth...@ptd.net
Subject: Re: MacJanitor
To: g3-5-list
My head sometimes spins at 45 RPM. How old am I.
I couldn't resist.
--- On Sat, 4/4/09, Doug McNutt dougl...@macnauchtan.com wrote:
From: Doug McNutt dougl...@macnauchtan.com
Subject: Re: resurrecting a hard drive?
To: g3-5-list@googlegroups.com
Date: Saturday, April 4, 2009, 10:28 AM
At
Precisely as regards putting those SCSI drives in their own external case, with
their own power supply. You can daisy chain them with a terminal at the end of
the chain and the original connection to the UL3D or UL4D or maybe a UL2D
which should also work.
Mel
--- On Wed, 3/25/09, dc dbc
if these cards
could be used to connect to an external SCSI for the purpose of booting from
that drive.
Mel
--- On Tue, 3/24/09, nestamicky nestami...@gmail.com wrote:
From: nestamicky nestami...@gmail.com
Subject: Multiple HDs in Sawtooth
To: g3-5-list@googlegroups.com
Date: Tuesday, March 24, 2009, 3
a restart boot, hold down ht eoption key and dselect the
new drive whch should be your master. If you you boot up successfuly then go
to Systems Preferences and select that HD as your boot drive.
I hope that works for you.
Mel
--- On Sun, 3/15/09, Lawrence David Eden lde...@comcast.net wrote
If you have backed up your data and software from that That first partition on
the big internal drive, then erase that partition and then use either CCC or
diskwarrior to restore it.
If you haven't backed it up, I don't know what to do.
Mel
--- On Mon, 3/9/09, joe j...@joethejuggler.com wrote
.
Mel
--- On Mon, 3/2/09, Yersinia yersi...@cybernex.net wrote:
From: Yersinia yersi...@cybernex.net
Subject: Re: Firewire hard drives not mounting
To: G-List g3-5-list@googlegroups.com
Date: Monday, March 2, 2009, 8:05 AM
M-hmm.been following this one quietly, now going to add
Over
require a solution which would be beyond your
current problem and would require a solution I am not qualified to offer.
Mel
--- On Mon, 3/2/09, Yersinia yersi...@cybernex.net wrote:
From: Yersinia yersi...@cybernex.net
Subject: Re: Firewire hard drives not mounting
To: G-List g3-5-list
.'
Mel
--- On Sat, 2/21/09, Anne Keller-Smith earth...@ptd.net wrote:
From: Anne Keller-Smith earth...@ptd.net
Subject: Do I really need a new processor?
To: g3-5-list@googlegroups.com
Date: Saturday, February 21, 2009, 10:09 AM
Hiyas ~
Got the memory working - I mean OWC sent me a new stick
Isn't overclocking a G4 DA to 1.g MHz pushing it?
How much can you overclock a 667 MHz G4 DA?
Mel
--- On Mon, 2/2/09, jonas ulrich jonasulrich3...@gmail.com wrote:
From: jonas ulrich jonasulrich3...@gmail.com
Subject: Re: Sawtooth vs DA/QuickSilver
To: g3-5-list@googlegroups.com
Date: Monday
when all you will use the Honda
is for grocery shopping. That principle should also apply to using computers.
BTW: I and my wife own and use a 1981 Accord SE, a 1985 Accord Hatchback and a
1959 VW PU truck (which we use about 200 miles a year).
I hope this minor opinion has helped.
Mel
and 10.2.8) with a 2906 PCI
card which allowed me to read/write to an external SCSI HDs but would not allow
me to boot from those drives. After I replaced that with an ATTO UL2D, I could
boot from those SCSI external drives.
Mel
--- On Wed, 12/31/08, insightinmind billycarm...@verizon.net wrote:
From
@googlegroups.com
Date: Thursday, October 23, 2008, 2:13 PM
On Oct 23, 2008, at 3:06 PM, Mel wrote:
What do you have connected to your Adaptec AUA-3020A FW/USB2 Duoconnect PCI
card?
If you are using external HDs, can you boot from those drives?
Mel
--
I have an OWC Elite (I think that's the model
I'll give it a try but not right away.
Mel
--- On Fri, 10/24/08, insightinmind [EMAIL PROTECTED] wrote:
From: insightinmind [EMAIL PROTECTED]
Subject: Re: Permissions Question, CCC 3.1.2 under Tiger a few more Qs ...
To: g3-5-list@googlegroups.com
Date: Friday, October 24, 2008, 1:50 PM
@googlegroups.com
Date: Sunday, October 19, 2008, 3:03 PM
Thanks Mel,
Does anyone have any further input on my suggestion beyond what Mel
had to say?
Richard
On Oct 16, 9:28 pm, Mel [EMAIL PROTECTED] wrote:
You thinking is spot on especially when there are a plethora of
inexpensive used G4s
OK.
I'll try that later today. (option key)
Mel
--- On Tue, 9/16/08, Charles Davis [EMAIL PROTECTED] wrote:
From: Charles Davis [EMAIL PROTECTED]
Subject: Re: Re. G4 DA with corrupted OS on master HD and slave HD
To: g3-5-list@googlegroups.com
Date: Tuesday, September 16, 2008, 9:59 AM
referred to I
gave up on PayPal over five years ago for similar reasons that have displeased
you. not to PayPal itself. The key object is not PayPal but the similar
reasons that have displeased you.
Mel
--- On Sat, 9/13/08, Len Gerstel [EMAIL PROTECTED] wrote:
From: Len Gerstel [EMAIL
empty empty
Mel
Total SDRAM is 1.25 GB. Note: I can't find the fourth slot on the G4 DA and
prresume that the G4 DA only has three slots for memory..
--- On Tue, 9/2/08, dc [EMAIL PROTECTED] wrote:
From: dc [EMAIL PROTECTED]
Subject: Re: question about memory for my G4
To: G3-5 List
Thanks.
Mel
--- On Tue, 9/2/08, diane [EMAIL PROTECTED] wrote:
From: diane [EMAIL PROTECTED]
Subject: Re: question about memory for my G4
To: g3-5-list@googlegroups.com
Date: Tuesday, September 2, 2008, 2:27 PM
At 2:21 PM -0700 9/2/08, Mel wrote:
Total SDRAM is 1.25 GB. Note: I can't find
I have no objection.
Mel
--- On Fri, 8/29/08, Wallace Adrian D'Alessio [EMAIL PROTECTED] wrote:
From: Wallace Adrian D'Alessio [EMAIL PROTECTED]
Subject: Re: I Love This Group
To: g3-5-list@googlegroups.com
Date: Friday, August 29, 2008, 11:54 AM
May I copy this text to the Psystar debate
61 matches
Mail list logo
