[Gimp-user] Printing problems on the Page Setup menu
Dear GIMP administration, As a GIMP user, I would like to report a bug on the Page Setup menu. When I select a paper size A4 or B5(JIS) before printing, it prints OK. But, if I select a paper size other than those mentioned above, the Page Setup menu does not remember (hold) the paper size selected and the printing procedure fails. In other words, I can only print on A4 or B5(JIS). Any chance to fix this problem? Many thanks. Kind regards Yusuf Tuney ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] printing 6x4 inch photos
I am having difficulty in printing postcard (6x4 inch) photos, Having completed photo enhancements I set up the page as 10x15cm and the image size to as near as I can get to this size (why will options not allow 10x15) but the print on 10x15 paper does not show the whole picture. It leaves approximate margin of 1.4mm at top and 1.1mm at left hand side losing parts of the picture at bottom and right side missing. I have tried many times with the same result. What am I doing wrong? Help appreciated. Thanks, David Sent from Mail for Windows 10 ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing with GIMP
>The usual advice for printing from a Windows Gimp is, don't. Use some >other application for printing. > >Gimp's origins are Unix and now developed in linux. Some things in >Windows are lacking and printing is one. The developers are volunteers >and no one is there to develop the old printing plugin. > >Answers to your questions >That print dialogue is linux, looks like this in my linux Gimp 2.10.6 >https://i.imgur.com/IBA4A8Z.jpg >Ancient reference. That is a plugin, Gutenprint, again linux (and >maybe Mac) My installation: https://i.imgur.com/U0htF5y.jpg >The Gimp Windows print only calls up the printer manufactures >software, that is where the settings are. >https://i.imgur.com/HrnPHb5.jpg >Not doing anything wrong. Do not use Gimp for printing, use whatever >image editing software comes with the printer. Usually some cut-down >stuff that will open a png from Gimp. Thanks. This is good advice - I was getting frustrated. -- JohnLarysz (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing with GIMP
I am new to Gimp and I'm using Gimp 2.10 under Windows 10. I am very familiar with Photoshop and other imaging programs. I am struggling with roll printing with Gimp, and with getting a print size other that 8.5" X 11". 1: I can't find the Print dialog described here - I just get the Windows 10 print dialog: "https://docs.gimp.org/2.10/en/file-print-gtk.html; 2: I can't find the print plugin mentioned here: " https://www.gimp.org/docs/gimp-print/print.html; 3: I can't make any roll parameters stick in the print dialog I do get. 4: The only print size that ever comes out is 8.5" X 11". What am I not doing that I should be doing? -- JohnLarysz (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing with GIMP
>I am new to Gimp and I'm using Gimp 2.10 under Windows 10. I am very >familiar with Photoshop and other imaging programs. I am struggling >with roll printing with Gimp, and with getting a print size other that >8.5" X 11". > The usual advice for printing from a Windows Gimp is, don't. Use some other application for printing. Gimp's origins are Unix and now developed in linux. Some things in Windows are lacking and printing is one. The developers are volunteers and no one is there to develop the old printing plugin. Answers to your questions >1: I can't find the Print dialog described here - I just get the >Windows 10 print dialog: >"https://docs.gimp.org/2.10/en/file-print-gtk.html; > That print dialogue is linux, looks like this in my linux Gimp 2.10.6 https://i.imgur.com/IBA4A8Z.jpg >2: I can't find the print plugin mentioned here: " >https://www.gimp.org/docs/gimp-print/print.html; > Ancient reference. That is a plugin, Gutenprint, again linux (and maybe Mac) My installation: https://i.imgur.com/U0htF5y.jpg >3: I can't make any roll parameters stick in the print dialog I do >get. > >4: The only print size that ever comes out is 8.5" X 11". > The Gimp Windows print only calls up the printer manufactures software, that is where the settings are. https://i.imgur.com/HrnPHb5.jpg >What am I not doing that I should be doing? Not doing anything wrong. Do not use Gimp for printing, use whatever image editing software comes with the printer. Usually some cut-down stuff that will open a png from Gimp. -- rich404 (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing images to scale
On Wed, 10 Oct 2018 19:14:44 -0400, Steve Kinney wrote: > On 10/10/2018 05:41 PM, Office TyAutDesigns wrote: >> Hello, I have a 36" plotter printer. I take pdf Images and resize them so >> the men in our shop can use them as a template for product that we make. >> GIMP is great with resizing however when I go to print the images they >> aren't coming out to scale. I tried messing with the page setup and print >> options but nothing has been able to work. In the print options I go to >> image settings and there is a section that I can change image dimensions but >> it won't let me change them. Anybody have any ideas where I am going wrong? >> Thanks! > > The usual solution would be to export your finished image in JPG or PNG > format, depending on the required resolution: JPG makes much smaller > files but introduces some noise; PNG makes larger files with no added > noise or loss of fine detail. You could also try using the Gutenprint plugin, which allows you to resize the image dimensions. -- Robert Krawitz *** MIT Engineers A Proud Tradition http://mitathletics.com *** Member of the League for Programming Freedom -- http://ProgFree.org Project lead for Gutenprint --http://gimp-print.sourceforge.net "Linux doesn't dictate how I work, I dictate how Linux works." --Eric Crampton ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing images to scale
On Wed, 2018-10-10 at 21:41 +, Office TyAutDesigns wrote: > there is a section that I can change image dimensions but it won't > let me change them. Anybody have any ideas where I am going wrong? Not entirely - which Linux distribution are you using, and which GIMP version exactly? You could try setting the prnt size (from the image menu, Print Size) and see if that works. You may have to create a custom page size for your printer, depending on what print system you're using. Liam -- Liam Quin - web slave for https://www.fromoldbooks.org/ with fabulous vintage art and fascinating texts to read. Click here to have the slave beaten. ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing images to scale
On 10/10/2018 05:41 PM, Office TyAutDesigns wrote: > Hello, I have a 36" plotter printer. I take pdf Images and resize them so the > men in our shop can use them as a template for product that we make. GIMP is > great with resizing however when I go to print the images they aren't coming > out to scale. I tried messing with the page setup and print options but > nothing has been able to work. In the print options I go to image settings > and there is a section that I can change image dimensions but it won't let me > change them. Anybody have any ideas where I am going wrong? Thanks! The usual solution would be to export your finished image in JPG or PNG format, depending on the required resolution: JPG makes much smaller files but introduces some noise; PNG makes larger files with no added noise or loss of fine detail. Then, import your finished image into a desktop publishing application like Scribus (Free Software), set the page size and image dimensions there, and export as PDF for printing. This procedure should give very accurate results, although I would suggest carefully measuring a test printout to assure that the printer itself is not introducing any errors in scale or placement that would require adjustment to compensate. :o) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing images to scale
Hello, I have a 36" plotter printer. I take pdf Images and resize them so the men in our shop can use them as a template for product that we make. GIMP is great with resizing however when I go to print the images they aren't coming out to scale. I tried messing with the page setup and print options but nothing has been able to work. In the print options I go to image settings and there is a section that I can change image dimensions but it won't let me change them. Anybody have any ideas where I am going wrong? Thanks! -Priscilla ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing error: Cairo error: out of memory
I have a Win 10 pro computer/a HP Deskjet 9800 printer/I try to print a photo using Gimp 2.8.18/I get the message: An error occurred while trying to print: Cairo error: out of memory. I have tried different settings/less dpi. The photo is a 5x7/photo size is 58,879 KB. Printer has no expandable memory capability. This is the only program that gives me this message while printing this photo. Wanted to use Gimp to see if it would give me a better saturated print/better color/etc. This maybe one of those situations where this error is the only option I get. Thank you for your time. -- BCG (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing Alignment
This is a longstanding, known issue with no fix in sight :( https://bugzilla.gnome.org/show_bug.cgi?id=562619 More specifically, the print offsets DO work but there is a seemingly 10:1 ratio between the specified value and what you actually get on paper (e.g. 1" offset = 0.1" on paper). The only workaround is to first set your image to the DPI you want to print at, then manually pad out your image canvas by the desired distance. -- Stratadrake strata_ran...@hotmail.com Numbers may not lie, but neither do they tell the whole truth. From: gimp-user-list <gimp-user-list-boun...@gnome.org> on behalf of pearlheartgtr <for...@gimpusers.com> Sent: Friday, April 21, 2017 5:00 AM To: gimp-user-list@gnome.org Cc: notificati...@gimpusers.com Subject: [Gimp-user] Printing Alignment I've been having this problem for ages. When I position an image in the print setup, it always ends up printing in the top left corner. I can reposition the image anywhere on the page, but it never prints that way. What I'm trying to do is print out an image, if I need to resize or edit it, I want to reuse the paper and print the new size in a different spot on the page. Currently, I have to flip the page and turn it over to print on the corners (I only get 4 prints out of a page that way). It would be nice to just drop the image next to the previous one. WIndows 10 Canon MP560 Gimp 2.8 -- pearlheartgtr (via www.gimpusers.com/forums<http://www.gimpusers.com/forums>) [http://www.gimpusers.com/assets/news_without_preview-35e621160a49ad0e6c18ac84161f548e.jpg]<http://www.gimpusers.com/forums> Forums — gimpusers.com<http://www.gimpusers.com/forums> www.gimpusers.com Forums. While there are many different GIMP forums of there, our own forums provide an extended way to communicate because they are connected to the official GIMP ... ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list gimp-user-list Info Page - GNOME Mail Services<https://mail.gnome.org/mailman/listinfo/gimp-user-list> mail.gnome.org To see the collection of prior postings to the list, visit the gimp-user-list Archives. Using gimp-user-list: To post a message to all the list ... List archives: https://mail.gnome.org/archives/gimp-user-list The gimp-user-list Archives - GNOME<https://mail.gnome.org/archives/gimp-user-list> mail.gnome.org GNOME.org. Home; Mailing Lists; List Archives; Search ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing Alignment
Thanks. I started using Ifranview for those types of prints. -- pearlheartgtr (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing Alignment
On 04/21/2017 08:00 AM, pearlheartgtr wrote: > I've been having this problem for ages. When I position an image in the print > setup, it always ends up printing in the top left corner. I can reposition the > image anywhere on the page, but it never prints that way. > > What I'm trying to do is print out an image, if I need to resize or edit it, I > want to reuse the paper and print the new size in a different spot on the > page. > Currently, I have to flip the page and turn it over to print on the corners (I > only get 4 prints out of a page that way). It would be nice to just drop the > image next to the previous one. > > WIndows 10 > Canon MP560 > Gimp 2.8 The only solution I know of is to use a desktop publishing application to make a PDF file with your image positioned as desired. Scribus is a good option. This is a very long standing problem, vs. not a problem except that the feature in question leads users to believe that the GIMP can do something it actually can't do. If anyone knows how to make the feature in question work, do please clue us in... :o) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing 24" x 36"
Problem Solved. I developed the plan in Inkscape then exported as a PDF. Also, opened the .svg file in GIMP and rendered a few of the circles as shrubs and saved that as PDF as well. Both printed with crisp lines and no pixelation or artifacts. Thanks Rick! >In GIMP try 600 or 1200 dpi. >Otherwise, use a vector program like Inkscape (at 600 dpi) which can >be >exported as a PDF. > >Rick S. > >-Original Message- >From: 21stDigitalBoy >Sent: Friday, February 24, 2017 11:20 AM >To: gimp-user-list@gnome.org >Cc: notificati...@gimpusers.com >Subject: [Gimp-user] Printing 24" x 36" > >When printing engineering/architectural prints at 24" x 36" the prints >show >pixelation around all of the lines. I saved the image as .png at 300 >DPI. > >I use Staples for my printing and they turn the .png into a PDF before >printing. > >I'm curious if I should be exporting as s a .tiff or another file >format. > >And what resolution should I set? > >Is the issue caused by transparency, RGB? > >I've attached images of the prints that show the pixelation/artifacts. > >Attachments: >* >http://www.gimpusers.com/system/attachments/489/original/IMG_20170224_105240816.jpg >* >http://www.gimpusers.com/system/attachments/490/original/IMG_20170224_105248610.jpg >* >http://www.gimpusers.com/system/attachments/491/original/IMG_20170224_110838403.jpg -- 21stDigitalBoy (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing 24" x 36"
Ok thanks Rick. I'll give 600 res a shot and also test with Inkscape. I'm hoping it is a raster vs. vector issue. I believe AutoCAD is a vector based program which is what I'm trying to imitate in terms of large prints. -- 21stDigitalBoy (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing 24" x 36"
You are aware that if you simply upscale an image to this ammount of pixels (24'' x 36 '' at 300dpi => 7200px x 10800px) you wn gain more definition at the corners if you start with a low resolution image, aren't you? Also, the JPEG file format is no tmeant for file art, and it will create the artifacts as they are shown - it is better for colored pictures only . Save your images as "png" instead. (Saving as JPG and afterwards converting them to PDF won't do - you have to save as PNG from the program where you draw the lines, and never transition them through the JPG file format) On 24 February 2017 at 13:20, 21stDigitalBoywrote: > When printing engineering/architectural prints at 24" x 36" the prints show > pixelation around all of the lines. I saved the image as .png at 300 DPI. > > I use Staples for my printing and they turn the .png into a PDF before > printing. > > I'm curious if I should be exporting as s a .tiff or another file format. > > And what resolution should I set? > > Is the issue caused by transparency, RGB? > > I've attached images of the prints that show the pixelation/artifacts. > > Attachments: > * > http://www.gimpusers.com/system/attachments/489/original/IMG_20170224_105240816.jpg > * > http://www.gimpusers.com/system/attachments/490/original/IMG_20170224_105248610.jpg > * > http://www.gimpusers.com/system/attachments/491/original/IMG_20170224_110838403.jpg > > -- > 21stDigitalBoy (via www.gimpusers.com/forums) > ___ > gimp-user-list mailing list > List address:gimp-user-list@gnome.org > List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list > List archives: https://mail.gnome.org/archives/gimp-user-list ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing 24" x 36"
In GIMP try 600 or 1200 dpi. Otherwise, use a vector program like Inkscape (at 600 dpi) which can be exported as a PDF. Rick S. -Original Message- From: 21stDigitalBoy Sent: Friday, February 24, 2017 11:20 AM To: gimp-user-list@gnome.org Cc: notificati...@gimpusers.com Subject: [Gimp-user] Printing 24" x 36" When printing engineering/architectural prints at 24" x 36" the prints show pixelation around all of the lines. I saved the image as .png at 300 DPI. I use Staples for my printing and they turn the .png into a PDF before printing. I'm curious if I should be exporting as s a .tiff or another file format. And what resolution should I set? Is the issue caused by transparency, RGB? I've attached images of the prints that show the pixelation/artifacts. Attachments: * http://www.gimpusers.com/system/attachments/489/original/IMG_20170224_105240816.jpg * http://www.gimpusers.com/system/attachments/490/original/IMG_20170224_105248610.jpg * http://www.gimpusers.com/system/attachments/491/original/IMG_20170224_110838403.jpg -- 21stDigitalBoy (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing 24" x 36"
When printing engineering/architectural prints at 24" x 36" the prints show pixelation around all of the lines. I saved the image as .png at 300 DPI. I use Staples for my printing and they turn the .png into a PDF before printing. I'm curious if I should be exporting as s a .tiff or another file format. And what resolution should I set? Is the issue caused by transparency, RGB? I've attached images of the prints that show the pixelation/artifacts. Attachments: * http://www.gimpusers.com/system/attachments/489/original/IMG_20170224_105240816.jpg * http://www.gimpusers.com/system/attachments/490/original/IMG_20170224_105248610.jpg * http://www.gimpusers.com/system/attachments/491/original/IMG_20170224_110838403.jpg -- 21stDigitalBoy (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing.
Hi, I am printing a picture and it has lines in the picture. What should I do to make the image solid? Thanks A.Wo ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] printing more than 1 image per sheet
>If you don't mind using another (free) program, you should check out >Scribus, an open source layout program. > >On an A4 sheet, depending on your margins, you can actually put three >6" x >4" photos; 1 horizontal and 2 vertical side-by-side. > >Rick S. Many thanks Rick - I will try this too J > >-Original Message- >From: JohnHaley >Sent: Thursday, January 26, 2017 3:35 AM >To: gimp-user-list@gnome.org >Cc: notificati...@gimpusers.com >Subject: [Gimp-user] printing more than 1 image per sheet > >Hi all > >newbie here - I have a printer that uses A4 sheets. I have 6"x4" >[152.4mm x >101.6mm] images and I want to print more than 1 image per A4 sheet and >then >cut >into single pictures after. Please advise how can do this. > >many thanks >J -- JohnHaley (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] printing more than 1 image per sheet
If you don't mind using another (free) program, you should check out Scribus, an open source layout program. On an A4 sheet, depending on your margins, you can actually put three 6" x 4" photos; 1 horizontal and 2 vertical side-by-side. Rick S. -Original Message- From: JohnHaley Sent: Thursday, January 26, 2017 3:35 AM To: gimp-user-list@gnome.org Cc: notificati...@gimpusers.com Subject: [Gimp-user] printing more than 1 image per sheet Hi all newbie here - I have a printer that uses A4 sheets. I have 6"x4" [152.4mm x 101.6mm] images and I want to print more than 1 image per A4 sheet and then cut into single pictures after. Please advise how can do this. many thanks J -- JohnHaley (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] printing more than 1 image per sheet
>All sorts of ways, but start with a Standard Gimp A4 template which is >already set up as 300 ppi suitable for printing. You will only get 2 >photos per sheet. Just remembered from the dim and distant past, there can be a snag when printing A4, especially with Windows. The image can get scaled a little. Something like 300 dpi becomes 307 dpi, not much but will shrink the images. Then if side margins come into play, ie borderless printing not possible, an A4 sheet will not fit anyway. The solution is make your A4 image with 2 photos from the standard template, then crop that down to a smaller size which prints without scaling. rich: www,gimp-forum.net -- rich2005 (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] printing more than 1 image per sheet
>Hi all > >newbie here - I have a printer that uses A4 sheets. I have 6"x4" >[152.4mm x 101.6mm] images and I want to print more than 1 image per >A4 sheet and then cut into single pictures after. Please advise how >can do this. > >many thanks >J All sorts of ways, but start with a Standard Gimp A4 template which is already set up as 300 ppi suitable for printing. You will only get 2 photos per sheet. Then it can be as simple as scaling your photographs to 1200 x 1800 pixels (4" x 6" @ 300 ppi) if not already that size and copy / paste into the A4 template. I prefer something a little more advanced, using layer masks. A how-to video here https://youtu.be/t6vQ0GdTF6c And the A4 2 photo template attached. A Gimp .xcfgz opens straight up in Gimp rich: www,gimp-forum.net Attachments: * http://www.gimpusers.com/system/attachments/443/original/2photo.xcfgz -- rich2005 (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] printing more than 1 image per sheet
Hi all newbie here - I have a printer that uses A4 sheets. I have 6"x4" [152.4mm x 101.6mm] images and I want to print more than 1 image per A4 sheet and then cut into single pictures after. Please advise how can do this. many thanks J -- JohnHaley (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing
On 01/12/2017 02:21 PM, Richard E Arns wrote: Hello How do I get Gimp to print larger than postage stamp picts? I have tried to research on line and just keep going in circles. Give me the good old printed manual over these on line things. Updates online are OK, but I am a book reader and due to injuries I cannot sit at the CPU for long periods of time. Have to keep shifting and walking around often. Haven't used the program for long but I need a the very least 4x6" and larger when an image is worth printing larger. Got about 3000 4x6" sheets! Use this size for general stuff. Wanted to print larger today with Gimp, but after three postage stamps and no obvious instruction to print larger, I quit. Grabbed my home shop made 4x5" film view camera and set off to do some coastal scenes. It's still more challenging and fun than digital! You really have to have a knowledge of light and other conditions to shoot film. The late and great Ansel Adams saw this coming many years before it all took place...the digital age. But, even he felt that there would always be a place for the film enthusiasts who preferred the challenge. If memory serve me he constructed a huge view camera in his Carmel, CA home that used film sheets that were either 11x14 inches or 16x20 inches in size! I, as I said, am a reader of books. The computer would not even be in my home if I hadn't needed it back in the '80s when I was still teaching and it became an (expensive) necessity in my life. I am slowly drifting away more and more from digital and back to my old faithful film darkroom. Got enough film, paper and supplies for at least 30 years. And more companies are selling them again. Sorry, did not mean to sound preachy! Can you tell I was a teacher? Just keep babbling on! Ha! Best, Richard Richard, I am a stamp dealer and we use gimp for tens of thousands of stamp images, so I should be able to be of some help. However, first we (all) need to know... 1) What is the source of the images you want to print? Flat bed scanner, digital camera ??? 2) At what resolution re the images being captured by that device? (In Gimp: open an image, in the menu go to Image, then Print Size. The resolution is stated there.) 3) What is the exact purpose/use of the printing? Please be specific (at least I should understand what you are talking about since I have been involved in stamp image printing for more than 43 years). 4) What type of device/printer are you printing on and are you printing in color or b/w? Laser printer, ink jet, etc.? Do you know from that device's documentation, what maximum image file resolution they suggest? Try to find that information. Note that you have specifically stated that you want to PRINT the images. That is a different workflow than what you would do for images that you just want to view on screen or on a website. Note that for stamps you really should be using a flat bed scanner. A camera is usually not worth the trouble for lots of reasons that we can discuss separately if you want to. (Others may find this explanation lacking and may have a better way of saying it...) In general, to print stamp images that look good you usually do best with 300 dpi/ppi REAL (not interpolated) resolution AT THE PRINTED SIZE. In other words, if you have a stamp that is 1x1 inch and it is captured at 300 ppi (pixels per inch) the image size is 300 x 300 pixels. But if you simply enlarge the image (by whatever means) so that it is printed at 4x4 inches, then you can't just spread those 300 pixels over four times the width or length (16 times the total data) and expect the result to look good. The 300 ppi/dpi PER INCH means the printed image goes from a pixel size of 300 x 300 to a printed image pixel size of 1200 x 1200 -- that's 1200 pixels x 1200 pixels of data. That data has to come from somewhere -- Gimp can interpolate data between two pixels, but it is just averaging the data between each two original pixels. (See below.) Also, if you are using a camera or flatbed scanner and telling it to do the enlarging, it may or may not be interpolating to get the larger size. It depends upon the native dpi/ppi resolution that the device captures. Many flat bed scanners have a setting for the resolution that you want to capture. So, if *I* am going to print an image at roughly four times the size of the original object (postage stamp), I will scan at either 1200 or 1600 dpi. I will then do my editing, cropping, etc. at that resolution. I will then COPY (SaveAs) the image to a different version (so not to lose my original) and ALL IN ONE OPERATION, expand the printing size and reduce the resolution. That "Print Size" dialog mentioned above will do that. As you increase the size, it automatically reduces the resolution because it is spreading the same data across a longer distance on the paper. Try it and you will see. I just doubled one and
Re: [Gimp-user] Printing
Image > Print Size. Your dpi should be 240 to 300 dpi for a 6" x 4" print. If it isn't do Image > Scale Image and change it. Rick S. -Original Message- From: Richard E Arns Sent: Thursday, January 12, 2017 2:21 PM To: gimp-user-list@gnome.org Cc: Current Location Subject: [Gimp-user] Printing Hello How do I get Gimp to print larger than postage stamp picts? I have tried to research on line and just keep going in circles. Give me the good old printed manual over these on line things. Updates online are OK, but I am a book reader and due to injuries I cannot sit at the CPU for long periods of time. Have to keep shifting and walking around often. Haven't used the program for long but I need a the very least 4x6" and larger when an image is worth printing larger. Got about 3000 4x6" sheets! Use this size for general stuff. Wanted to print larger today with Gimp, but after three postage stamps and no obvious instruction to print larger, I quit. etc... Best, Richard ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing
Hello How do I get Gimp to print larger than postage stamp picts? I have tried to research on line and just keep going in circles. Give me the good old printed manual over these on line things. Updates online are OK, but I am a book reader and due to injuries I cannot sit at the CPU for long periods of time. Have to keep shifting and walking around often. Haven't used the program for long but I need a the very least 4x6" and larger when an image is worth printing larger. Got about 3000 4x6" sheets! Use this size for general stuff. Wanted to print larger today with Gimp, but after three postage stamps and no obvious instruction to print larger, I quit. Grabbed my home shop made 4x5" film view camera and set off to do some coastal scenes. It's still more challenging and fun than digital! You really have to have a knowledge of light and other conditions to shoot film. The late and great Ansel Adams saw this coming many years before it all took place...the digital age. But, even he felt that there would always be a place for the film enthusiasts who preferred the challenge. If memory serve me he constructed a huge view camera in his Carmel, CA home that used film sheets that were either 11x14 inches or 16x20 inches in size! I, as I said, am a reader of books. The computer would not even be in my home if I hadn't needed it back in the '80s when I was still teaching and it became an (expensive) necessity in my life. I am slowly drifting away more and more from digital and back to my old faithful film darkroom. Got enough film, paper and supplies for at least 30 years. And more companies are selling them again. Sorry, did not mean to sound preachy! Can you tell I was a teacher? Just keep babbling on! Ha! Best, Richard ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing a poster file issues
>I need to create a poster that is roughly 1.3m x 2m and the printer >requires at least 300 DPI. > ..big snip.. >Can anyone suggest how to get my PDF file out and that will be able to >be printed when sent to the printer? Would a professional printer >have some sort of software that will allow them to print a PDF that I >can't print? Lets have a few file sizes for comparison. A Gimp xcf, not quite as large as yours 14172x23622 px (1.2m x 2.0 @ 300ppi) with a large graphic (a photograph) and some text in layers. Gimp shows this as 3.8 GB in memory. xcf file size 400 MB exports a pdf 286 MB Exported as a jpg, file size 21 MB and that exported as a pdf 300 MB Exported as a png, file size 130 MB, exports as a pdf 325 MB Conclusion, not much point exporting to jpeg/png for the purpose of creating a PDF. The xcf PDF did contain text in a vector format, otherwise with png/jpeg and everything flattened to a bitmap. Print resolution: Are you sure the printing company really requires 300 dpi or is that just general figure? A poster can have a reduced dpi depending on distance viewed. Some guidance see: http://www.northlight-images.co.uk/what-print-resolution-works-for-what-viewing-distance/ Printing process: Do you know how it will be printed? A modern commercial laser printer will print at 100 ppc (pixels per cm) and produce superb quality, but costs a fortune. Send them a jpeg. If offset printing then a CMYK pdf is often used. The tool for that is not inkscape it is the DP application Scribus. Want to print full size on A3 sheets to joint together as a check. Split the image up into separate parts. Set up some guides as A3 sized sections ( 3508x4960 px) Use Image -> Transform -> Guillotine Plenty how-to's on this if you search. rich: www.gimp-forum.net -- rich2005 (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing a poster file issues
On 01/10/2017 05:19 PM, big__dav wrote: > Please go easy on me as I have not done anything like this before and I am > sure > I am making a stupid mistake somewhere. > > I need to create a poster that is roughly 1.3m x 2m and the printer requires > at > least 300 DPI. That a lot of pixels. But I am confident that the PDF file size can be reduced. Try exporting your image to PNG, and to JPG format at about 85% quality. This should yield smaller files. PNG is a lossless format, so there will be no loss of resolution; JPG will be smaller than the PNG, at the cost of a slight amount of noise. The slight loss of resolution found in the JPG file will not matter, if your poster will be viewed from more than arm's length away. You may also find that 150 DPI is sufficient for your purpose, again if the poster will not be viewed at "normal reading distance," which gives a file 1/4 the size of one in the same format at 300 DPI. To make the PDF file, I would import the JPG into Inkscape, adjust the and export to PDF from there. Do File > Import and select the Embed option. Then do File > Document Properties, and select the resize page to content option (set any necessary margins here). Do File > Save As, and select Portable Document Format. In the dialog, set the resolution to match whatever your image DPI is (i.e., 300 or 150 depending on the image file you exported from the GIMP). Your PDF files should be about the same size as the PNG and JPG files you made with the GIMP. A poster the size you describe will usually be viewed from far enough away that 300 DPI vs. 150 DPI will not make a visible difference, and if so, that gives you a 75% savings in file size. Inkscape: https://inkscape.org/en/ Generally speaking, Inkscape is "the" Free tool for making PDF files. :o) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing a poster file issues
1. Save your original and then save a copy under a new name. 2. Flatten it. Check that your photo is no more than 300 dpi. 3. Do Image > Scale Image and scale it down to the size you will print out at on your home printer i.e. A3. Make the pxi 300. 4. Save to PDF. 5. Print the PDF. Can someone tell me if the file sizes I am experiencing are to be expected--YES Should I be able to print a PDF this size out?--NO, NOT AT HOME. Can anyone see anything that I am doing wrong?--FILE IS TOO BIG FOR YOUR HOME PRINTER. Can anyone suggest how to get my PDF file out--SEE ABOVE and that will be able to be printed when sent to the printer?--SEND YOUR PRINTER A FLAT FILE, AT THE LARGE SIZE. Would a professional printer have some sort of software that will allow them to print a PDF that I can't print?--YES Rick S. -Original Message- From: big__dav Sent: Tuesday, January 10, 2017 5:19 PM To: gimp-user-list@gnome.org Cc: notificati...@gimpusers.com Subject: [Gimp-user] Printing a poster file issues Please go easy on me as I have not done anything like this before and I am sure I am making a stupid mistake somewhere. I need to create a poster that is roughly 1.3m x 2m and the printer requires at least 300 DPI. I have created my poster in GIMP and it consists of 7 layers - x1 large picture that fills the poster and several other small logos/pictures/text. The pixels per inch setting in GIMP was set as 350. The GIMP file is roughly 687Mb and when I export it to a PDF the PDF file is roughly 375Mb. When I try to open the PDF file in Adobe Reader DC I get an error - out of memory and the file does not open. GIMP version - 2.8.18 Adobe Reader DC version - 2015.020.20042 When I export to PDF from GIMP I ensure that the options to ignore hidden layers is ticked and also that the option to convert to vector data type if possible is ticked. After getting stuck here I removed the hidden layers from the GIMP file ie deleted them - they are used for alignment and information when designing. After this the file size was very slightly smaller and Adobe Reader could open the file. However when I tried to print it out in A3 sheets to check to see how it looks Adobe hung up on the flattenning stage. So I then went back to GIMP and flattened it in GIMP so that everything was combined into one layer. Now when I go back to Adobe to print I have no hanging up on flattening however it hangs up on "print 0%". When I check the task manager Adobe is using up plenty of processing so it is doing something... Having no experience in doing something like this I dont know if the file sizes involved are "normal" or not. Can someone tell me if the file sizes I am experiencing are to be expected - I would assume they are. Should I be able to print a PDF this size out? Can anyone see anything that I am doing wrong? Can anyone suggest how to get my PDF file out and that will be able to be printed when sent to the printer? Would a professional printer have some sort of software that will allow them to print a PDF that I can't print? -- big__dav (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing a poster file issues
Please go easy on me as I have not done anything like this before and I am sure I am making a stupid mistake somewhere. I need to create a poster that is roughly 1.3m x 2m and the printer requires at least 300 DPI. I have created my poster in GIMP and it consists of 7 layers - x1 large picture that fills the poster and several other small logos/pictures/text. The pixels per inch setting in GIMP was set as 350. The GIMP file is roughly 687Mb and when I export it to a PDF the PDF file is roughly 375Mb. When I try to open the PDF file in Adobe Reader DC I get an error - out of memory and the file does not open. GIMP version - 2.8.18 Adobe Reader DC version - 2015.020.20042 When I export to PDF from GIMP I ensure that the options to ignore hidden layers is ticked and also that the option to convert to vector data type if possible is ticked. After getting stuck here I removed the hidden layers from the GIMP file ie deleted them - they are used for alignment and information when designing. After this the file size was very slightly smaller and Adobe Reader could open the file. However when I tried to print it out in A3 sheets to check to see how it looks Adobe hung up on the flattenning stage. So I then went back to GIMP and flattened it in GIMP so that everything was combined into one layer. Now when I go back to Adobe to print I have no hanging up on flattening however it hangs up on "print 0%". When I check the task manager Adobe is using up plenty of processing so it is doing something... Having no experience in doing something like this I dont know if the file sizes involved are "normal" or not. Can someone tell me if the file sizes I am experiencing are to be expected - I would assume they are. Should I be able to print a PDF this size out? Can anyone see anything that I am doing wrong? Can anyone suggest how to get my PDF file out and that will be able to be printed when sent to the printer? Would a professional printer have some sort of software that will allow them to print a PDF that I can't print? -- big__dav (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing Problem
On 21/01/16 19:56, Derek Grieson wrote: I have attached the original gimp as I am trying to print and you can see the end result. Can anyone help? This mailing list doesn't accept attachments. Post the image on some image server (imgur.com or else) and attach a link here. ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing Problem
Help anyone, I have attached the original gimp as I am trying to print and you can see the end result. Can anyone help? Derek --- This email has been checked for viruses by Avast antivirus software. http://www.avast.com ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing in GIMP
On 12 February 2015 at 04:17, Geoffrey Sougnez geoffrey.b.soug...@gsk.com wrote: Good morning, Can you explain me how can I have the name of the picture when I print it? What do you mean?: You want the file name of an image to show up as a caption to printed images? If so, that is not possible with GIMP alone - One would have to put up a script for it - and maybe, since you won't want text constrained to your image resolution, a LIbreoffice or Inkscape script. Thank you. Geoffrey Sougnez QC Biochimie B11 GlaxoSmithKline Vaccines Building WN21-F4-056 | Avenue Fleming | 1300 Wavre | Belgium T: +3226564334 E: geoffrey.b.soug...@gsk.commailto:geoffrey.b.soug...@gsk.com [Description : Description : Description: cid:image001.jpg@01CD132C.27416BA0] ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing in GIMP
The question is not very clear. Do you want the image name embedded in the document or as a title for the document or something else? Thanks, Partha On Thu, Feb 12, 2015 at 1:17 AM, Geoffrey Sougnez geoffrey.b.soug...@gsk.com wrote: Good morning, Can you explain me how can I have the name of the picture when I print it? Thank you. Geoffrey Sougnez QC Biochimie B11 GlaxoSmithKline Vaccines Building WN21-F4-056 | Avenue Fleming | 1300 Wavre | Belgium T: +3226564334 E: geoffrey.b.soug...@gsk.commailto:geoffrey.b.soug...@gsk.com [Description : Description : Description: cid:image001.jpg@01CD132C.27416BA0] ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing in GIMP
Good morning, Can you explain me how can I have the name of the picture when I print it? Thank you. Geoffrey Sougnez QC Biochimie B11 GlaxoSmithKline Vaccines Building WN21-F4-056 | Avenue Fleming | 1300 Wavre | Belgium T: +3226564334 E: geoffrey.b.soug...@gsk.commailto:geoffrey.b.soug...@gsk.com [Description : Description : Description: cid:image001.jpg@01CD132C.27416BA0] ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing a resized Image
On Sat, 07 Jun 2014 22:46:48 +0200 fotch for...@gimpusers.com wrote: I tried the search engine for an answer but didn't have any luck. I just resized a basic line drawing image using the resize tool, saved the file and tried to print it. When doing a print preview I noticed the image is the size of the original. What have I missed? Any help would be appreciated. More information would help. What operating system, printer model and driver, settings in GIMP, etc. You probably have something set either in GIMP or the printer driver to print to page size. It would need to be set to actual size or the scale factor set the same for both. Tom -- Nobody grows old by merely living a number of years. People grow old only by deserting their ideals. - Douglas MacArthur ^^ --... ...-- / -.- --. --... -.-. ..-. -.-. Tom Taylor KG7CFC openSUSE 13.1 (64-bit), Kernel 3.11.6-4-default, KDE 4.11.2, AMD Phenom X4 955, GeForce GTX 550 Ti (Nvidia 325.15) 16GB RAM -- 3x1.5TB sata2 -- 128GB-SSD FF 27.0, claws-mail 3.10.0 registered linux user 263467 ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing a resized Image
* fotch for...@gimpusers.com [06-07-14 16:47]: search google for your answer, but: image_size != print_size they are not the same thing! Patrick, Thanks for responding. I did as you suggested and found the Gimp User Manual task: 4.3. Change the Size of an Image for print. I think I understand the difference between the two and the point you made. However, I still don't understand why the image I'm looking at in print preview isn't the same size as the image I resized. The background sized to 11x17 appears to be correct in print preview, but the image I resized (4x's it's original size) on the 11x17 background prints as it's original size. I'm not sure if I'm explaining this correctly, but you can enlarge an image and print it out to it's new size can't you? I'm on a Mac and can't figure out how to do a screen capture to show you what I'm talking about. Any other thoughts? Thanks -- fotch (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing a resized Image
* fotch for...@gimpusers.com [06-08-14 10:16]: * fotch for...@gimpusers.com [06-07-14 16:47]: search google for your answer, but: image_size != print_size they are not the same thing! Patrick, Thanks for responding. I did as you suggested and found the Gimp User Manual task: 4.3. Change the Size of an Image for print. I think I understand the difference between the two and the point you made. However, I still don't understand why the image I'm looking at in print preview isn't the same size as the image I resized. Again, image_size and print_size are two completely different things and only related by expected quality output; larger image_size *frequently* means better print quality, but not always. The background sized to 11x17 appears to be correct in print preview, but the image I resized (4x's it's original size) on the 11x17 background prints as it's original size. Yes, image_size != print_size I'm not sure if I'm explaining this correctly, but you can enlarge an image and print it out to it's new size can't you? You certainly can, but you must change the *print_size* when you export the image or in the print application. I'm on a Mac and can't figure out how to do a screen capture to show you what I'm talking about. I do not need it. I understand what you are saying, but I have failed to make you understand the difference between image_size and print_size. Any other thoughts? open your image in gimp select image then print size adjust the print_size, width/height or x/y resolution export the image or print from gimp paying attention to print size and making necessary adjustments if needed. There are explanations: http://easybasicphotography.com/image-resolution-pixels-print-sizes.html http://www.photoshopessentials.com/essentials/image-resolution/ Megabytes of an image explains the storage size on disk Height/width explains/describes the canvas size which is *not* the display or print size Pixels describes the number of points per inch/... that an image is set to display or print The same image will display much smaller on a 1920x1080 screen that it will on a 1024x768 screen (from the pixel setting) If you enlarge the canvas size of an image x2 w/o changeing the pixel settings, you halve the pixel settings; ie: 300x300 to 150/150. (really you have quartered it taking width and height into account). I hope this helps. -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri http://wahoo.no-ip.orgPhoto Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535@ http://linuxcounter.net ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing a resized Image
On Sat, Jun 7, 2014 at 5:37 PM, Patrick Shanahan ptilopt...@gmail.com wrote: It's also better to keep a larger image but modify the dots per inch to adjust the print size so that a more crisp image is printed at the size you require. e.g. you have 3000x2250 px image and you wanted to print a 9x5 photo it would be better to keep the image the same size and set the DPI to 3000/9 = 333.33 DPI but you would need to calculate and crop the height. If you have 2250/333.33DPI = 6.75. Since that is the case then you should crop your image and make the height 5*333.33 px = 1666.66px. As a summary if I wanted to print my large image to a 9x5 printed photo I'd have to crop it to 3000x1666px and set the print to 333 DPI (dots per inch) give or take some minor percent error. SAM, Sam, Thanks, I'll play around with it and see if I can get the results I need. -- fotch (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing a resized Image
Patrick, Sorry about being so dense about this, I think the light bulb has finally gone on. I really appreciate your help... and patients. -- fotch (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
[Gimp-user] Printing a resized Image
I tried the search engine for an answer but didn't have any luck. I just resized a basic line drawing image using the resize tool, saved the file and tried to print it. When doing a print preview I noticed the image is the size of the original. What have I missed? Any help would be appreciated. -- fotch (via www.gimpusers.com/forums) ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing a resized Image
* fotch for...@gimpusers.com [06-07-14 16:47]: I tried the search engine for an answer but didn't have any luck. I just resized a basic line drawing image using the resize tool, saved the file and tried to print it. When doing a print preview I noticed the image is the size of the original. What have I missed? search google for your answer, but: image_size != print_size they are not the same thing! -- (paka)Patrick Shanahan Plainfield, Indiana, USA @ptilopteri http://en.opensuse.orgopenSUSE Community Memberfacebook/ptilopteri http://wahoo.no-ip.orgPhoto Album: http://wahoo.no-ip.org/gallery2 Registered Linux User #207535@ http://linuxcounter.net ___ gimp-user-list mailing list List address:gimp-user-list@gnome.org List membership: https://mail.gnome.org/mailman/listinfo/gimp-user-list List archives: https://mail.gnome.org/archives/gimp-user-list
Re: [Gimp-user] Printing Color Managment
On Sat, Feb 16, 2013 at 4:22 PM, Alexandre Prokoudine wrote: If this is about the Gutenprint plug-in, then any wrongdoings are most likely on its side. Actually, after another reading of the original mail I think I made a rush judgement. It's quite possible that GIMP is sending incorrect data to the printing plug-in. I'm not sure if Elle looked at this part of the color management implementation in GIMP during her work last year. If that's indeed what's happening, it would be great to fix this in 2.10. Alexandre Prokoudine http://libregraphicsworld.org ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Printing Color Managment
Hi, On Fri, Feb 15, 2013 at 1:45 AM, Lowell PBS4U pb...@hotmail.com wrote: On the Argyllcms list Gerhard Fuernkranz wrote “Btw, regarding gimp, I remember that in the past old versions of the gimp print plug-in did fiddle with the colorsduring printing, i.e. the DeviceRGB numbers sent to the printer did not match the RGB numbers in gimp's working space. I don't know, however, whether this still applies to recent versions.” So I thought I'd answer this question, with your help. Does Gimp still “fiddle with the colors during printing”? Actually I think the problem you are refering to is more that printers do not use RGB at all. The most common color space for printers is CMYK: http://en.wikipedia.org/wiki/CMYK_color_model RGB on the other hand is done for screen display. And so the answer is that unfortunately there is still no CMYK support in GIMP. You can't create a CMYK image in GIMP. This means that when you send the RGB image to your printer, a conversion is done to the other color space, but this conversion is not perfect (basically the result will change with the material). So that means that GIMP is good for all work made to stay on screen (web, animation, video, etc.), but less for printed work. Note that for printed work, even if you have a software with CMYK support, your screen is still RGB (so now the conversion is done on display, same problem), and if your printer is not well calibrated, it may still be different from what a professional printer will print. That means that having CMYK support is a start, but that is only one single link in a bigger chain of failure. That also means that it is a problematic for professionals designers or alike, who will also afford additional material and/or effort to calibrate their screen, scanner, printer, etc. For most basic users, this support is not as useful in reality as most people have badly calibrated material. But yes, that would still be good when GIMP will support CMYK. Jehan pb...@hotmail.com ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
[Gimp-user] Printing Color Managment
On the Argyllcms list Gerhard Fuernkranz wrote “Btw, regarding gimp, I remember that in the past old versions of the gimp print plug-in did fiddle with the colors during printing, i.e. the DeviceRGB numbers sent to the printer did not match the RGB numbers in gimp's working space. I don't know, however, whether this still applies to recent versions.” So I thought I'd answer this question, with your help. Does Gimp still “fiddle with the colors during printing”? pb...@hotmail.com ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
[Gimp-user] Printing with gimp 2.8 to epson artisan 710
I'm relatively new to Gimp so bear with me if this has been covered previously. I've installed gimp 2.8 on a windows 7 x64 machine and have an epson artisan 710 printer. When trying to print from gimp I can set all of the preferences in the epson print driver, through the fileprint menu, for photo printing 4x6 using the photo tray but for some reason the printer only prints to the 8.5x11 tray. The picture is not the correct size and is printed on the paper in an orientation that almost looks like a print preview. Meaning even if I loaded a 4x6 photo paper in the main tray it would not print correctly. I have tried to install guten print for windows but it crashes gimp. I assume this is a conflict with the dll files copied into the plugin folder. I can print using Picasa and windows photo viewer just fine. Thanks Matt -- View this message in context: http://gimp.1065349.n5.nabble.com/Printing-with-gimp-2-8-to-epson-artisan-710-tp36989.html Sent from the Users mailing list archive at Nabble.com. ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Printing with gimp 2.8 to epson artisan 710
On 13.12.12 at 2:17 PM parsons75 wrote: I've installed gimp 2.8 on a windows 7 x64 machine and have an epson artisan 710 printer. When trying to print from gimp I can set all of the preferences in the epson print driver, through the fileprint menu, for photo printing 4x6 using the photo tray but for some reason the printer only prints to the 8.5x11 tray. The picture is not the correct size and is printed on the paper in an orientation that almost looks like a print preview. Meaning even if I loaded a 4x6 photo paper in the main tray it would not print correctly. This is a known issue in GTK+, an underlying library which for instance handles printing for GIMP. You find a list of printing related bugs in GTK+ on Bugzilla [1]. To stay informed about updates and to give the developers are more complete view of the bug it was nice if you registered at Bugzilla and reported your problem at the appropriate bug report. I have tried to install guten print for windows but it crashes gimp. I assume this is a conflict with the dll files copied into the plugin folder. Gutenprint for Windows is a separate plugin, that is not shipped with GIMP. Please report this to the Gutenprint plugin developer [2]. I can print using Picasa and windows photo viewer just fine. Yes, exporting the image to for instance PNG format and print it with another program is a workaround till the bug in GTK+ is fixed. Kind regards, Sven [1] https://bugzilla.gnome.org/buglist.cgi?query_format=advanced;order=Importance;short_desc=print;bug_status=UNCONFIRMED;bug_status=NEW;bug_status=ASSIGNED;bug_status=REOPENED;bug_status=NEEDINFO;longdesc=orientation%20size;short_desc_type=allwordssubstr;classification=Platform;product=gtk%2B;longdesc_type=anywordssubstr [2] http://registry.gimp.org/node/14567 ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
[Gimp-user] Printing difficutlies
Hi everyone, I have another problem! I made an A6-file with pictures I wanted to print. I have A6 photo paper for this and I have set all my printer related stuff to A6 format. However, when I print I see my image has been moved to the left so I only see half of my image and the rest is gone. (so my right half is on the left side and the left side is outside the papers borders) I have set GIMP to A6 so I don't know what the problem is. I tried printing 3 times while changing things here and there (like flattening the image and changing page setup) but to no avail. I am using a lexmark S605 and it is not an alignment issue of my printer since it prints other things well. Does anyone know what the problem could be? Thanks! Michael -- lost_shinigami (via gimpusers.com) ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Printing difficutlies
lost_shinigami wrote: Hi everyone, I have another problem! I made an A6-file with pictures I wanted to print. I have A6 photo paper for this and I have set all my printer related stuff to A6 format. However, when I print I see my image has been moved to the left so I only see half of my image and the rest is gone. (so my right half is on the left side and the left side is outside the papers borders) I have set GIMP to A6 so I don't know what the problem is. I tried printing 3 times while changing things here and there (like flattening the image and changing page setup) but to no avail. I am using a lexmark S605 and it is not an alignment issue of my printer since it prints other things well. Does anyone know what the problem could be? Which operating system are you using? There are issues with print positioning on Windows, e.g.: https://bugzilla.gnome.org/show_bug.cgi?id=491230 https://bugzilla.gnome.org/show_bug.cgi?id=562619 https://bugzilla.gnome.org/show_bug.cgi?id=659740 Mark. ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
[Gimp-user] Printing out Greyscale on Photo Paper is very dark.. ideas?
Hi, I've been printing out a lot of black and white photos on photo paper on a HP Photosmart 7510e. The printouts are very dark so I've had to boost the brightness levels in GIMP prior to printing. The problem is that this takes extra time and I also don't want to save these levels in the XCF file. I would say that (going by the Gamma Display Filter) the printouts are around 40% of the brightness they ought to be. My question is, does anyone else have this problem and what can be done about it? I've googled for an .ICC for my printer but it hasn't really helped, unless I'm setting it wrong. Any help/ideas apprectiated. Cheers David -- Studioware http://www.studioware.org ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Printing out Greyscale on Photo Paper is very dark.. ideas?
On (18:50 23/09/12), David Woodfall d...@dawoodfall.net put forth the proposition: Hi, I've been printing out a lot of black and white photos on photo paper on a HP Photosmart 7510e. The printouts are very dark so I've had to boost the brightness levels in GIMP prior to printing. The problem is that this takes extra time and I also don't want to save these levels in the XCF file. I would say that (going by the Gamma Display Filter) the printouts are around 40% of the brightness they ought to be. My question is, does anyone else have this problem and what can be done about it? I've googled for an .ICC for my printer but it hasn't really helped, unless I'm setting it wrong. Apologies for replying to my own post, but what seems to work is the following (with black and white photos at least): Set levels for black and white point Set gamma display filter to 0.4 Adjust centre point on levels to 1.5 (or what brings it back to normal) Work on image Print I would still like to know if there is a better way to do this. The less work that goes into a photo usually results in a better quality print. ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Printing out Greyscale on Photo Paper is very dark.. ideas?
On Sun, Sep 23, 2012 at 9:50 PM, David Woodfall wrote: Hi, I've been printing out a lot of black and white photos on photo paper on a HP Photosmart 7510e. The printouts are very dark so I've had to boost the brightness levels in GIMP prior to printing. The problem is that this takes extra time and I also don't want to save these levels in the XCF file. I would say that (going by the Gamma Display Filter) the printouts are around 40% of the brightness they ought to be. My question is, does anyone else have this problem and what can be done about it? I've googled for an .ICC for my printer but it hasn't really helped, unless I'm setting it wrong. Googling for arbitrary ICC profiles isn't such a great idea. Color reproduction doesn't depend on just the printer. It's a combination of printer, inks and paper. I wouldn't print from GIMP either. Try PhotoPrint: http://www.blackfiveimaging.co.uk/index.php?article=02Software%2F01PhotoPrint Alexandre Prokoudine http://libregraphicsworld.org ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] printing photos on paper etc
On Fri, 2012-07-20 at 05:52 -0700, odimegwu david wrote: [...] I want to process some photos for printing (i.e the paper used for printing family and social photos; I believe you understand what I mean?). please, what dpi or ppi do I use on gimp? Btw, what do photographers call such a paper? The paper is photo paper usually, for an inkjet. If you are doing only small changes to pictures, experiment with printing at 144 and 288ppi, and also 150 and 300. If there's text in the pictures you may want to try 600ppi. It will depend on your printer. Usually, each pixel in the image will turn into a square of tiny dots on the paper, so the image resolution is much lower than the dots-per-inch of the printer. The best result for contrast and colour will probably be 1/16th of your printer's highest dpi resolution. Liam -- Liam Quin - XML Activity Lead, W3C, http://www.w3.org/People/Quin/ Pictures from old books: http://fromoldbooks.org/ Ankh: irc.sorcery.net irc.gnome.org freenode/#xml ___ gimp-user-list mailing list gimp-user-list@gnome.org https://mail.gnome.org/mailman/listinfo/gimp-user-list
[Gimp-user] Printing a large image in sections
I have an image sized 20 x 24. I just have a standard 8.5 x 11 printer. Can I print the image in sections? If so, how? I did this with a PDF document once. Thanks, George ___ gimp-user-list mailing list gimp-user-list@gnome.org http://mail.gnome.org/mailman/listinfo/gimp-user-list
Re: [Gimp-user] Printing a large image in sections
On 12/31/2011 07:32 PM, george seifert wrote: I have an image sized 20 x 24. I just have a standard 8.5 x 11 printer. Can I print the image in sections? If so, how? I did this with a PDF document once. Thanks, George I think I would probably open that thing in the GIMP, and drag guide lines into the canvas from the rulers to divide it into 6 sections, 2 sections x 3, so that each section will easily fit onto one page the printer can handle. Then crop the image down to one of the sections, print the resulting image, and undo the crop. Crop to another section, print, undo, etc. until you have six hard copy images. The guide lines make pixel perfect precision easy. If for some reason you want precise dimensions for the sections, calculate using the DPI of the image to get linear measurements, and use the Image Guides New Guide command to position guides exactly where you want them. You could also save six images in the format of your choice and print them elsewhere or with a different application, depending on what works best with your combination of hardware and software. :o) Steve ___ gimp-user-list mailing list gimp-user-list@gnome.org http://mail.gnome.org/mailman/listinfo/gimp-user-list