On Fri, 18 May 2012 14:11:14 -0500, McKown, John
john.mck...@healthmarkets.com wrote:
If you do have a 3270 type console, why not record the console on your cell
phone camera? It is a bit small. So, get a tablet. Might take two people. One
to do the IPL, the other to keep the console in focus.
On Wed, 26 Oct 2011 14:24:58 -0500, Jorge Garcia jgarc...@mapfre.com wrote:
.DEFAULT,AUTO(YES),SUP(NO),RETAIN(YES)
IEF402I /*JJJ FAILED IN ADDRESS SPACE X
SYSTEM ABEND SXXX REASON - RC
NOTIFY OPER OF FAILURE /*
IEF403I
On Tue, 5 Jul 2011 12:36:17 -0700, Skip Robinson
jo.skip.robin...@sce.com wrote:
At the end of the day, if a big problem befalls you, and you have to tell
the story to your boss, would you rather have to explain why you...
1. installed a HIPER PTF that went south, or
2. refrained from
On Tue, 24 May 2011 06:50:29 -0500, Tom Marchant m42tom-
ibmm...@yahoo.com wrote:
If your emulator supports hotspots you can set it up so that you point to
the screen you want on the swapbar and double click with the mouse.
Hotspots also work with the action bar and some menus. Also the PF keys
On Tue, 24 May 2011 10:56:54 -0400, Dave Salt ds...@hotmail.com
wrote:
I remember it was a PITA trying to figure out how to enable mouse support in
Attachmate, but eventually I got it working (sort of). You have to single left
click the mouse to position the cursor, and single right click to
On Tue, 24 May 2011 10:29:22 -0500, Patrick Lyon
ptl...@midamerican.com wrote:
Dave, Thanks to someone who shall go nameless who sent me some
instructions for V 9 offlist, I was able to find out how to do it.
Under SettingsDisplayMiscellaneous where I can select to have it send
ENTER
On Mon, 23 May 2011 18:22:13 +0200, Lindy Mayfield
lindy.mayfi...@ssf.sas.com wrote:
I have been using multiple ISPF screens for many years now, 12 or so. I
have memorized what each one is. Like 1 is edit, 2 is SDSF, 3 is ISHELL, 4 is
3.4 and so on.
Problem is that I still cannot figure out
On Mon, 23 May 2011 14:46:20 -0400, Scott Rowe
scott.r...@joann.com wrote:
Pat,
I think the maximum can be increased by changing
MAXIMUM_NUMBER_OF_SPLIT_SCREENS in your installation options.
Scott
Oh, don't tell me that. :)
Thanks for the tip!
On Fri, 20 May 2011 09:32:27 -0500, Dana Mitchell mitchd...@gmail.com
wrote:
Thanks everyone for the ideas so far. It happened again yesterday and now
I'm leaning more towards this being caused by the dataset being in use by
another job.
Dana - You could use DAF to check your SMF data to see
On Wed, 13 Apr 2011 12:14:45 -0500, John P Kalinich jkali...@csc.com
wrote:
Norbert,
We use ABR instead of HSM, but the create date was from an IDCAMS
DEFINE.
Regards,
John K
John, you may want to verify that is a fact. I just attempted to do a DEFINE
with IMBED and REPLICATE and the
On Tue, 12 Apr 2011 15:28:57 -0500, Matthew Stitt
mathwst...@bellsouth.net wrote:
Try looking in SDSNMACS, members starting with DSNDQW..
I remember looking at these records several years ago and almost throwing up
my hands due to the layouts.
On Tue, 12 Apr 2011 15:09:43 -0500, Hal
On Tue, 29 Mar 2011 08:07:23 -0500, Chase, John jch...@ussco.com
wrote:
Windoze, Linux, et al (even z/VM) do that automatically. Why is it
(still) necessary to do it manually on z/OS?
-jc-
I would suspect that if done automatically it could pose a problem to
applications that do have a
On Tue, 29 Mar 2011 22:04:18 +0300, Sergio Lima
sergio...@hotmail.com wrote:
Hello,
We also tried use IDCAMS here from see tape contents and don't work.
Can you please say what can I get a sample JOB ?
Thanks,
Sergio
Not sure if this works or not, the date on the member is prior Y2K...
On Tue, 8 Mar 2011 09:20:12 -0600, Elardus Engelbrecht
elardus.engelbre...@sita.co.za wrote:
Jim McAlpine wrote:
If I do ST SYSLOG inSDSF, I get the following -
Now if I try to select any of those SYSLOG jobs in the OUTPUT queue I get
NO DISPLAYABLE DATA like so -
any ideas why.
Why are the
On Thu, 17 Feb 2011 10:26:51 -0600, Eric Bielefeld eric-
ibmm...@wi.rr.com wrote:
I have two questions about security.
What is the difference between R-INACT and REVOKED? I know what
revoked is, but I'm not sure what R-INACT is exactly. I have searched the
Security Server bookshelf, and
On Fri, 4 Feb 2011 10:03:26 -0800, Edward Jaffe
edja...@phoenixsoftware.com wrote:
Anyone ever notice the sloppy column alignment in the legend following a D
M=CPU command. Is there a technical reason they couldn't line things up?
They
didn't notice it was wrong during testing? I know this is a
On Wed, 26 Jan 2011 23:57:38 -0600, Chris Mason
chrisma...@belgacom.net wrote:
George
You need to insert the T between TN3270E and CONN just as indicated
by Patrick Lyon.
It is only from Communications Server V1R10 that it becomes unnecessary.
-
Interesting Chris - I cut and pasted
On Wed, 26 Jan 2011 13:35:19 -0600, Chris Mason
chrisma...@belgacom.net wrote:
George
I scanned the IP System Administrators Commands manual in order to check
on this matter of the CONN operand. There's no actual explanation but it's
suspicious that, when entered as a command operand, the
On Thu, 27 Jan 2011 14:55:05 -0600, Chris Mason
chrisma...@belgacom.net wrote:
Patrick
Thanks for the clarification.
I started doing the hex to decimal conversion and received the message:
EZZ6057I NO QUALIFYING MATCHES
I think this is saying that you tried the command I suggested without the
On Wed, 26 Jan 2011 13:56:20 -0500, George Rodriguez
george.rodrig...@palmbeachschools.org wrote:
Hi Chris,
snip
D TCPIP,TN3270E,CONN,CONN=38B37
EZZ6048I TELNET DISPLAY COMMAND FAILED WITH RCODE 803E
EZZ6035I TELNET DEBUG PROFILE WARNING,LINE: *N/A* MOD: EZBTMCMD
RCODE: 803E-00 Parameter on
Anyone, I have an associate that is trying to subscribe to IBM-MAIN.
He gets to the Join screen and it says it will send him an email, which never
arrives.
Can somebody please point me to the List Admin/Owner so he can contact
them?
Thanks in advance,
Pat L.
On Mon, 24 Jan 2011 09:14:30 -0800, Charles Mills charl...@mcn.org
wrote:
Have him check his junk mail filters, both at the client (email program)
level and at the server (ISP or corporate IT) level.
I'm sure about 50 listers will tell you that the admin is Darren Evans-Young
On Fri, 14 Jan 2011 09:03:50 -0800, Charles Mills charl...@mcn.org
wrote:
Does anyone know off hand at what level of z/OS did z/OS Unicode services
start supporting the CUNLINFO (information retrieval service) call? I know
V1R10 does and V1R7 did not. (Yes, I could track down all the manuals in
On Fri, 7 Jan 2011 06:46:40 -0500, Richards, Robert B.
robert.richa...@opm.gov wrote:
Anyone else having trouble with service.boulder.ibm.com?
I have an automated process of getting enhanced holddata that has failed
the last two days in a row with:
EZA2589E Connection to server interrupted or
On Fri, 7 Jan 2011 11:02:29 -0500, Richards, Robert B.
robert.richa...@opm.gov wrote:
Patrick,
I *was* trying to get the full.txt file, but I am seeing the same problem with
the full.bin file. sigh
Bob
Interesting. I just tried and downloaded full.bin just fine and then realized
I
On Thu, 6 Jan 2011 13:01:32 -, Terry Sambrooks
terry.sambro...@btclick.com wrote:
Hi,
snip
Not being that familiar with MQ I am unsure where to start with this. I have
not found z/OS Messages and Codes or the WAS equivalent to be that
helpful.
Kind Regards - Terry
snip
Terry - Let's
On Tue, 4 Jan 2011 19:18:53 +, Eric Bielefeld eric-
ibmm...@wi.rr.com wrote:
Cheryl,
I clicked on the link below, and it says The Webpage Cannot Be Found:.
You might want to either fix it, or say it won't be available until you get it
updated.
--
Eric Bielefeld
Systems Programmer
Take
On Wed, 22 Dec 2010 14:48:41 -0500, Veilleux, Jon L
veilleu...@aetna.com wrote:
Actually, once I take a closer look at the run. The exec gets RC=20
executing the SELECT.
*-* ISPEXEC SELECT CMD(%ADYDSP 'SYS1.DAE')
ISPEXEC SELECT CMD(%ADYDSP 'SYS1.DAE')
+++ RC(20) +++
Jon - Please ensure
On Wed, 15 Dec 2010 13:45:10 -0500, C. Ardillo cardill...@comcast.net
wrote:
I'm just an application programmer but from my tool set I'd run an
idcams dcollect job against the storage groups in question then use
something like easytrieve to compute my thresholds and send an email if
needed from
On Fri, 3 Dec 2010 11:45:12 -0600, Darth Keller
darth.kel...@assurant.com wrote:
snip
You're now on battery power and have 23 minutes to power everything off as
gracefully as possible.
/snip
I, unfortunately, have lived it. Minus the 23 minutes.
We had a normal power bump to our building.
On Thu, 2 Dec 2010 10:22:40 -0500, Farley, Peter x23353
peter.far...@broadridge.com wrote:
Thanks to all who replied. I'm happy to know it is not just my problem.
Not that it helps to get the job done any faster.
BTW, what email address do I use to complain about this? Is there a link on
Well, I guess my Serverpac download did not lay that dataset down because
when I do 3.4 on ISF, it's not there.
Thanks.
John Norgauer
John, see if you can find that module in the list of the ISF libraries on 3.4
by
typing MEMBER ISFVTBL2 on the command line.
Perhaps the library is named
On Wed, 25 Aug 2010 09:17:14 -0400, Lizette Koehler
stars...@mindspring.com wrote:
We are seeing small spurts in paging. We will be going along fine for hours
and then suddenly see a 1-2 min spike in paging for DB2. And when I say
spike, it goes from 0 page-in up to 35% pagein rate under RMF.
On Tue, 14 Sep 2010 15:00:23 -0400, Sabo, Frank
frank.s...@gianteagle.com wrote:
Good afternoon everyone,
Question does any one out there have an EMC DLM box?
I have been trying to get one up and functional for a while now.
I have genned the box to both HCD and SMS the problem that I am having
). The
tape drives assigned to this VTE being rebooted must be varied offline before
the reboot.
/quote
Regards to all,
Patrick Lyon
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu
On Wed, 8 Sep 2010 09:53:37 -0700, Charles Mills charl...@mcn.org
wrote:
When you issue an operator command from SDSF (/S proc or /D IPLINFO, for
example) what determines whether SDSF displays NO RESPONSE RECEIVED
in the
upper right or displays the messages that result from the command's being
On Mon, 30 Aug 2010 13:53:38 -0500, Brad Wissink bjwi...@iastate.edu
wrote:
We started getting the following message from our EMC DMX4 Symmetrix over
the weekend. We are talking with EMC but not getting very far. So, does
anyone know what the message is telling us?
*IEA480E
On Tue, 10 Aug 2010 20:01:08 +0200, MONTERO ROMERO, ENRIQUE ELOI
enriqueeloi.mont...@servifactory.com wrote:
Hi forum team,
Hope you are well,
I am looking for an HSM command to get a list of backups of a dataset.
I mean, a command that lists all backups that a dataset has. (of course
John - do you have both STGRCVY and STGPROT set to Yes?
Looks like GSSP042 is being a bad boy and trying to overwrite storage. You
might try to disable that program or transaction that is associated with that
program.
--
For
On Mon, 9 Aug 2010 07:33:51 -0500, McKown, John
john.mck...@healthmarkets.com wrote:
Well, the damn thing has abended twice. We got everybody involved and I
posted my help message. I just brought up the region and it is running fine
now. We can't get it to fail again. Why does it always wait
On Mon, 9 Aug 2010 22:43:50 +0300, Mike Shorkend
mike.shork...@gmail.com wrote:
It seems that our problem was on Jerry Ng's hot topic list at SHARE last
week.
IBM have supplied a temporary fix which seems to have solved the problem.
Mike - Was it in PTF or local fix form? The APAR has not
You can use ISRSUPC to do this. It is the LNFMTO option.
Here is an example.
JCL:
//JOBCARD JOB etc...
//SRCHJ PROC DSN='PROD1.PROC.LIBRARY'
//SRCH000 EXEC PGM=ISRSUPC,PARM='SRCHCMP,LNFMTO'
//NEWDDDD DISP=SHR,DSN=DSN
//OUTDDDD SYSOUT=*
On Wed, 21 Jul 2010 12:36:38 -0500, Staller, Allan allan.stal...@kbm1.com
wrote:
I don't know if EMC has the ability to fence the cache for workload separation
(open systems vs. z/OS).
That would be a no. We now live happily together here again on a VMAX.
Once upon a time in Symmetrix land
Try the HOLD MIGRATION(AUTO) command and see what happens.
From the manual:
To interrupt or prevent only automatic volume space management and
automatic secondary space management, issue the following command.
Automatic volume space management and automatic secondary space
management stops at
On Tue, 20 Jul 2010 10:57:02 -0400, John Kelly
john_j_ke...@ao.uscourts.gov wrote:
snip
Try the HOLD MIGRATION(AUTO) command and see what happens.
/snip
Shouldn't Hold Migration trump (AUTO), in that it should stop ALL
migrations?
One would think so, but it appears that it did not, or at least
On Tue, 29 Jun 2010 16:01:35 +, Ted MacNEIL eamacn...@yahoo.ca
wrote:
-
I'm a SuperHero with neither powers, nor motivation!
SHAZAM!
OMG - I have to hand it to you Ted. I didn't think it was possible to come up
with a tagline more annoying than your last, but by George, you've done it.
,
Patrick Lyon
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
On Tue, 22 Jun 2010 21:41:19 +0200, R.S.
r.skoru...@bremultibank.com.pl wrote:
We observed very similar thing: vast majority of our backups are never
read! We work on eliminating those never-read backups. That could save
us a lot of resources. vbg
And pray to the almighty that some of them
On Sat, 19 Jun 2010 10:41:50 -0700, Gibney, Dave gib...@wsu.edu
wrote:
I ge the same error
And this morning I get this one:
GIM44336S ** AN UNUSUAL CONDITION OCCURRED. GIMJVREQ -
javax.net.ssl.SSLException: Unrecognized SSL message, plaintext connect
On Mon, 21 Jun 2010 07:23:21 -0500, Patrick Lyon
ptl...@midamerican.com wrote:
On Sat, 19 Jun 2010 10:41:50 -0700, Gibney, Dave gib...@wsu.edu
wrote:
I ge the same error
And this morning I get this one:
GIM44336S ** AN UNUSUAL CONDITION OCCURRED. GIMJVREQ -
javax.net.ssl.SSLException
On Fri, 18 Jun 2010 11:45:20 -0600, Kopischke, David G.
dgkopisc...@oppenheimerfunds.com wrote:
Any ideas on what to check next
David, a couple of questions if I may.
1) Does the Extra session stay connected?
2) Is this a telnet session to port 23?
3) What is supposed to appear on
On Mon, 14 Jun 2010 07:52:57 -0700, John Dawes
jhn_da...@yahoo.com.au wrote:
G'Day All Readers,
I am trying to find the job name which created a VSAM dsn. I read type 61,
62 64 and came up empty. The DSN was created on May 20, 2010. I have
read the SMF tapes for the whole week and I
On Thu, 10 Jun 2010 10:40:48 -0500, Pommier, Rex R.
rex.pomm...@cnasurety.com wrote:
Hi List,
Is anybody else having problems with IBM ESC+? I get a page not found
when trying. Just wondering if it is them or if I have a bad URL.
Thanks.
Rex
I'm getting the same thing too Rex
On Thu, 3 Jun 2010 11:48:55 -0500, McKown, John
john.mck...@healthmarkets.com wrote:
I like my TI-36X Solar. Hum, I wonder if some smart phone (Droid?) has this
as an application?
--
Add another Ti to the list - the Ti-34 Solar. Been by my side since I bought
it
in 1988 when going to tech
Darth - If you have access to ISMF, go into 10. Library Management, 3. Tape
Library, and do a 2. Display on the library.
Page down 1 page and see the Initial Online Status for that system.
Not sure that is it, just a wild guess.
From the help panel:
The INITIAL ONLINE STATUS fields show the
On Wed, 26 May 2010 17:27:18 +0100, Jim McAlpine
jim.mcalp...@gmail.com wrote:
--snip--
XPLINK(ON),
ENVAR(JCC_HOME=/usr/lpp/db2/db2810,
JAVA_HOME=/u/Java6_31/J6.0,
JVMPROPS=/java/jvmprops)
---/snip
In section 5.1.2 Run-time environment for Java
On Tue, 25 May 2010 15:17:08 -0500, Rick Fochtman rfocht...@ync.net
wrote:
Interesting thought: if they continue with numbers, how long before the
z28 ??? :-)
One a year would make it 17 years, which is when I will (hopefully) retire.
On Mon, 24 May 2010 22:26:53 +1000, Shane Ginnane ibm-
m...@tpg.com.au wrote:
Probably qualifies as descriptive though.
And more socially acceptable than a few others I've heard.
Shane ...
On Mon, May 24th, 2010 at 9:56 PM, Peter Relson wrote:
... choked to death is not a very technical
On Fri, 21 May 2010 09:56:27 -0700, Edward Jaffe
edja...@phoenixsoftware.com wrote:
Unless I'm missing something, it seems like any Joe Blow goofing
around and/or with malicious intent can exploit this behavior to break
any process involving remote FTP GET.
--
Edward - Then any Joe Blow should
On Fri, 21 May 2010 12:25:00 -0500, Joel C. Ewing jcew...@acm.org
wrote:
If it is more important that the GET have minimal possibility of failure
than to get the absolutely latest update, the best option may be to make
a mirror copy of the data at an agreed on point in time into a dataset
with
On Fri, 21 May 2010 10:47:38 -0700, Charles Mills charl...@mcn.org
wrote:
Old data is not a problem. Had he FTPed two minutes earlier he would have
gotten old data. All data is old in that it may change at some point in
the future. The problem is only if the user does a preliminary save --
being
On Thu, 20 May 2010 15:24:34 +0100, Chokalingam Thangavelu
thangavelu.chokalin...@wipro.com wrote:
Hi,
Please let me know 1. From where 'hostname' command in OMVS picks the
hostname information
2. Do we need to change anything in OMVS side as part
of this IP address changed
On Fri, 14 May 2010 10:30:32 -0600, Howard Brazee
howard.bra...@cusys.edu wrote:
I need to find a PDS member, and I know it starts with QA05. Trouble
is, I don't know the name of the PDS. (The person who created it
retired). I suspect the PDS is archived off.
What do you recommend?
On Wed, 14 Apr 2010 09:46:01 -0500, Walt Farrell wfarr...@us.ibm.com
wrote:
What is important is that you understand that you are at risk if you do not
carefully control who can run those SMP/E functions, and that your users
who
can run those functions must be very trusted users. And that's
On Thu, 13 May 2010 10:31:39 -0500, Mark Zelden mzel...@flash.net
wrote:
Not if you define only 1 profile as GIM.*. I suspect that will suffice for
at least 95% of the shops out there. We've already discussed the
unlikelihood of shops desiring to do something more granular like
giving a
On Thu, 13 May 2010 11:15:31 -0500, Walt Farrell wfarr...@us.ibm.com
wrote:
Walt said:
Sorry, but you've only quoted part of the APAR text. Start a bit earlier,
please:
Ok, here is the entire quote:
quote
HOWEVER, OF ALL THE FUNCTIONS DESCRIBED ABOVE, SEVERAL
NEED TO BE CONTROLLED VERY
On Thu, 13 May 2010 11:33:36 -0500, Mark Zelden mzel...@flash.net
wrote:
Do you
define every possible profile under STGADMIN for example just because
many exist?
Well of course not, that would be too much work. :)
Should it be reviewed and addressed? Absolutely.
On Wed, 12 May 2010 20:48:13 +0800, Tommy Tsui
tommyt...@gmail.com wrote:
Hi all,
I got the following messages in our production LPAR, D GRS,C, I can't
find who enqueue the *MASTER*, how can I find it???
Please help!!
Try a D GRS,AN,BLOCKER command Tommy
On Fri, 7 May 2010 12:18:57 -0400, Mark Jacobs
mark.jac...@custserv.com wrote:
The apar doesn't say that there's an fix available but I just opened up
an ETR with IBM to see if something is available.
--
Mark Jacobs
Time Customer Service
Tampa, FL
Local fix is to Set the GDS_RECLAIM SMS
snipWhen we load the lpar and we enter the nslookup command, it's works
and
respond with a dns (¡¡not right!!). /snip
Jorge - what are you NSLOOKUPing? an internal name or an external name? If
it is an internal name it may be specified in the TCPIP.HOSTS.* files.
Also when you do an
On Thu, 6 May 2010 21:30:40 +0100, Sam Siegel s...@pscsi.net wrote:
And when talking to Unix/Windows folks, explaining (over and over)
that dataset nodes are not directory paths and that PDS(E) can only be
1 level deep.
As well as they way GDGs work (unless they have a VAX background).
On Tue, 4 May 2010 07:56:09 -0400, Lizette Koehler
stars...@mindspring.com wrote:
Listers -
We only use 3390-9 at our shop. I have heard rumors that I will need a
Mod27 to download this file.
Lizette - We only have mod-3's here and I sucessfully downloaded it here.
You just want to make
On Wed, 28 Apr 2010 13:26:21 -0500, Schwartz, Alan alan.schwa...@acs-
INC.COM wrote:
DELETE SYS1.OMVS.AAOPROOT.M2OMA1 CAT
(SYS1.MCATZS19.MVS2)
IKJ56228I DATA SET SYS1.OMVS.AAOPROOT.M2OMA1 NOT IN CATALOG OR
CATALOG
IKJ56228I CAN NOT BE ACCESSED
List [mailto:ibm-m...@bama.ua.edu] On
Behalf Of Patrick Lyon
Sent: Wednesday, April 28, 2010 1:42 PM
To: IBM-MAIN@bama.ua.edu
Subject: Re: HFS Copy Problem
On Wed, 28 Apr 2010 13:26:21 -0500, Schwartz, Alan alan.schwa...@acs-
INC.COM wrote:
DELETE SYS1.OMVS.AAOPROOT.M2OMA1 CAT
(SYS1.MCATZS19
On Mon, 26 Apr 2010 16:12:03 +, Eric Bielefeld eric-
ibmm...@wi.rr.com wrote:
Allis Chalmers was a HUGE manufacturing presence in Milwaukee for many
years. My Dad worked there for 30 years. I also knew some of the people
that worked in their datacenter. All gone now.
~
On Tue, 20 Apr 2010 15:05:14 -0500, Pommier, Rex R.
rex.pomm...@cnasurety.com wrote:
Hi List,
I know this is IBM-main and not the TCPIP list but I get better responses
here anyway. :-)
That said, is there some way of getting the IP address that is bound to an
OSA card from the z/OS console?
On Tue, 23 Mar 2010 16:22:54 -0400, Lizette Koehler
stars...@mindspring.com wrote:
I am not sure I have seen that before.
Sometimes IBM recommends tools that are internal to them. But they think
it is common.
Lizette
This is for Z/os REXX. I had a suggestion from an SCLM IBM'er to do
On Tue, 23 Mar 2010 16:43:23 -0400, Farley, Peter x23353
peter.far...@broadridge.com wrote:
That was my assumption as well, from the context. But a search of the
z/OS 1.10 and 1.11 ISPF bookshelves reveals no hits for either VERLIST
or VERDEL.
Maybe these really are internal IBM goodies? Or
On Thu, 18 Feb 2010 14:48:04 -0500, Richards, Robert B.
robert.richa...@opm.gov wrote:
snipAccording to the programmer, the job issued IGZ0026W after an ICE46A
message and the program DID NOT abend and finished with a return code of
ZERO./snip
And according to the fortune from my fortune
On Wed, 17 Feb 2010 10:26:56 -0500, George Henke gahe...@gmail.com
wrote:
Here is what I thought was a dumb question until someone posed it to me
yesterday.
Why have a separate QA LPAR and not just leave QA in the DEV LPAR?
The more I tried to come up with a good reason, the more I could not
On Tue, 9 Feb 2010 15:31:25 +0200, ××ª× ×××
matancohen...@gmail.com wrote:
hi,
i added a NSINTERADDR in the tcpdata.
after i started the tcpip i noticed that the tcpip AS try to start a
procedure NAMESRV.
i this procedure don't exist in my procedure libraries .
i try to find information
On Tue, 9 Feb 2010 16:37:34 +0200, ××ª× ×××
matancohen...@gmail.com wrote:
patrick,
thanks for your response.
but where can i find this procedure in case i want it to run.
what is the benfit in running this procedure ?
Things apparently have changed greatly in this area, and I am not
On Mon, 14 Dec 2009 10:58:28 -0600, Patrick Lyon
ptl...@midamerican.com wrote:
BTW for those who might care, BMC's fix is PUT0939.
My apologies, the PTFs are BPU0939, BPU0940, BPU0941, and BPU0966.
--
For IBM-MAIN subscribe
, this happened to bite us Saturday night. I have enclosed
the updated APAR. It says it will be fixed in a future release. Might it be
fixed in 1.11? I cannot find any more on the subject via SIS.
BTW for those who might care, BMC's fix is PUT0939.
TIA,
Patrick Lyon
APAR Identifier
On Tue, 8 Dec 2009 15:34:27 -0500, Joe Aulph syspro...@gmail.com
wrote:
Duty bound that I am, I've dug thru the JCL Reference discussions on
OUTPUT,
WRITERs, attempted a few tests with variations on the WRITER theme, sith
no
success.
Joe - you indicated you could not get this to work. This
On Wed, 2 Dec 2009 14:54:44 -0500, Jousma, David
david.jou...@53.com wrote:
All,
Are system or installation defined system symbols other than SYSPLEX or
SYSNAME available for use in ACS routines? Looking at the manuals, it
is not clear.
Dave - it appears you are correct. Up to release 1.11,
On Tue, 24 Nov 2009 08:36:57 -0600, Mark Zelden
mark.zel...@zurichna.com wrote:
And people wonder why some sysprogs are skeptical when
application programmers and system users come to them with a problem
and say nothing changed. (I try go by trust, but verify)
Can I hear an Amen?
On Mon, 23 Nov 2009 11:36:45 -0600, Rabbe, Luke
luke.ra...@countryfinancial.com wrote:
Thanks to all for the replies.
Luke
I have a question if I may...
What happens if say there is a dynamic library in the concatenation missing at
JES startup? Does JES continue on notifying you of the
Thanks Dennis and Mark!
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@bama.ua.edu with the message: GET IBM-MAIN INFO
Search the archives at http://bama.ua.edu/archives/ibm-main.html
On Fri, 20 Nov 2009 13:40:54 -0500, Jousma, David david.jou...@53.com
wrote:
Figures. Was trying to place order all day today. Job just sat
there
Thanks for the update.
Same here - tried both URLs too.
Was going to post something but didn't. As long as we are on the subject
though...
On Fri, 20 Nov 2009 12:45:24 -0600, Field, Alan C.
alan.c.fi...@supervalu.com wrote:
snip
We have a number of jobs that have many steps. One of those steps is an
IDCAMS reproing a number of datasets.
/snip
Do you have an MVS monitor like TMON or Omegamon? You could look in
there, but most
On Thu, 19 Nov 2009 10:48:49 -0600, Hal Merritt
hmerr...@jackhenry.com wrote:
snip
After thorough technology and product evaluations, Stratus was chosen as
best able to provide an open platform with 99.999 percent uptime reliability
/snip
Guess they got their .001.
On Thu, 19 Nov 2009 13:56:25 -0700, Roach, Dennis (N-GHG)
dennis.ro...@lmco.com wrote:
Looks like a router failure
http://gcn.com/articles/2009/11/19/faa-software-hackers-delays.aspx?
s=FAAnewsalert
4 hours to fix a router? Good Grief.
On Thu, 12 Nov 2009 15:56:13 -0600, McKown, John
john.mck...@healthmarkets.com wrote:
True. But some of our vendors still change us at the 66 MSU level because
they change according to the maximum possible MSU for the box.
Then the issue would not be of you wasting CPU, more of they don't
On Fri, 13 Nov 2009 08:30:49 -0600, McKown, John
john.mck...@healthmarkets.com wrote:
Correct. Most of the time, we only hit 48 during month end processing (or
when something goes wrong and some program loops grin). But we need 48
at month end to meet our SLAs.
Then just set your conversion
On Fri, 13 Nov 2009 08:10:58 -0600, McKown, John
john.mck...@healthmarkets.com wrote:
No. When I waste CPU, that increases our sub-capacity bill, which is the
majority of our software. And so it is anathema. There are only a few vendors
who change at the 66 MSU level, regardless of actual
On Fri, 13 Nov 2009 09:41:59 -0600, McKown, John
john.mck...@healthmarkets.com wrote:
Tom,
Thank you very much for that information. I wonder why management around
here has always been pushing the don't use the mainframe unless you
absolutely must button. I.e. do more desk checking rather
On Thu, 12 Nov 2009 16:08:11 -0800, Ed Gould ps2...@yahoo.com wrote:
I agree with you and other posters but I think I have some evidence that
indicates IBM is essentially attempting to get rid of a lot of sysprogs.
Ed, while I see your point in your post I guess I have to ask, why are there 2
On Fri, 13 Nov 2009 13:58:37 -0600, McKown, John
john.mck...@healthmarkets.com wrote:
But how many of them are as relatively knowledgable in their platform as we
older sysprogs on ours? Believe it or not, I once had an AIX admin (sysprog)
ask me how to do some things in BASH scripting! He
You gotta love how it starts:
Economy got you down?
And then how it ends:
Steady state mainframe support position requiring on-call and weekend
coverage.
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send
1 - 100 of 255 matches
Mail list logo