mark,,
The Not defined can mean:
Not defined means that the storage group or volume (specified on this
command) is specified in the SMS configuration as not being connected
to this MVS system. If the storage group or volume is not defined in
the active configuration, a
Just thought you would like to know that I was reading the zJournal mag
(hardcopy) and noticed an article called
Basic BASH scripting for Mainframe System Programmers
by Mark Post
Congrats Mark. I actually understood that information on BASH.
Lizette
The best way to resolve this issue is to do the following:
1) Make sure the type of data set (VSAM vs. NON VSAM). If you have VSAM
cataloged in the MCAT you will need to work a little harder.
2) Uncatalog all of the NON Vsam data sets in the Master Cat
3) Build the Alias for the HLQ
4)
You could look in SYSLOG or OPERLOG for the jes message indicating an offload.
Or if you have the offload data set you could probably reload (receive) the job
back into jes2.
I am not sure there is any other way, other than reviewing SMF data for jes
transmissions.
Lizette
Hi,
Someone
What I would love to see happen is that the handouts are on flash drives or
they could load the handouts on my flash drive so I can take notes directly on
my computer.
Lizette
One speaker actually suggested that the attendee might
take notes on a pad of some sort (remember college?) and
then
You could join the IMS newsgroup and post questions about IMS there.
http://www.bsu.edu/wa.exe?SUBED1=ims-lA=1
Lizette
Hello everyone, do we have anyone out there that can help with an IBM
mainframe IMS question?
Thanks a lot,
Francios,
What messages are you looking to include for the display? Products like
QUICKREF or ABEND AID can do that for you.
AFAIK there is no message library that contains a listing of all z/OS messages
online for the user to use. Other than Bookmgr on the mainframe.
Or could you provide
Francois,
That is an ISPF Message Skeleton Library. Therefore you would have vars that
would not be resolved. I am not sure that is exactly what you need. The
library is setup with message prefixes but not all messages are in this library.
Lizette
Actually I found SYS1.MSGENU library
I do not know if this will help, but IBM provides a PDF summary card for SDSF
http://www-03.ibm.com/servers/eserver/zseries/zos/sdsf/pdf/sdsfcard.pdf
Lizette
Does anyone know of an SDSF user manual newer than the OS/390 2.10
version dated June 2000? The z/OS manuals are title Operation and
I think that he is looking for a programmatical way to include the messages in
a job's run. Which means he probably needs to look at products like QUICKREF
or ABENDAID.
Or he is trying to write his own and just looking for a feeder file. We need
to know what specific messages he is needing
This is probably DTS Software's SCC product. Storage Control Center. It is an
improved STOPX37 product.
It has rules that will monitor allocation and if needed add volumes to prevent
space abends.
Lizette
Is anyone familiar with messages
ACC20210-A ADDVOL FOR DD=SYS4
I have gone through several iterations and just cannot see the forest for the
trees.
I need to sort hex data in ISPF and batch. I have tried a couple of variations
but the x'A' - x'F' always go to the top of the sorted list. I really would
like 0-9, x'A' - x'F'
I have not found on the ISPF
] On
Behalf Of Lizette Koehler
Sent: Thursday, March 06, 2008 10:31
To: IBM-MAIN@BAMA.UA.EDU
Subject: Sorting Hex Data - ISPF or Batch
I have gone through several iterations and just cannot see the forest
for the trees.
I need to sort hex data in ISPF and batch. I have tried a couple of
variations
We have a similar issue in our shop. The midrange area wants tapeless. the
Mainframe side TAPE.
We have a VTS and ATL. We use the product DRVI to stack the VTS Tape backups
to an real tape and ship it offsite for DR purposes. Tape is cheap. tape can
survive years in a dusty hole and still
Have you looked at RMF data to see what the job is doing?
Do you have products like STROBE or OMEGAMON that can help you isolate the jobs
run?
Is the application cycle controled by products like ENDEVOR or ChangeMan? If
so, you can then verify when changes have been made to the application
I think most shops have ISRDDN as it is shipped with ISPF.
Just issue TSO ISRDDN on the command line.
Then issue ENQ
You can then put in the dataset name or just look and see what is enqueued.
Lizette
quote
DELETE (PRIMV.PPO.XDF)
0IKJ56241I DATA SET PRIMV.PPO.XDF NOT ALLOCATED
In my mind the question is: Does the data set physically exist?
If it does not, then a DEL name NOSCRATCH NOPURGE will remove the entry from
the catalog.
If it does exist, then it is possible that ISMF will allow you to delete it.
Some of the other suggestions may work.
Lizette
Good Day
I need some suggestions on how to limit where a program (in this instance SAS)
runs. I know I can write a program that would test for the LPAR name and then
either link to SAS or fail the request. But what are my other options? we are
z/os v1.7
REXX?
WLM?
OTHER?
We do not have Through Put
I am curious. Do I care if it is full or if it has a lot of splits (CA/CI)? I
had one catalog in my past we called a database because it was over 700,000
entries. We reorged it every weekend because it performed poorly due to the
splits, not the size.
Lizette
Other posters have responded
I am having an issue with an application that is defined in TPX. At some point
users are unable to logon and start to receive 0821 Sense code from VTAM.
I am thinking I do not have a sufficient number of LUs for somethign in TPX but
I am unable to discern what that area is. I have TPXGR
Thanks for all the suggestions so far.
I have been testing with my userid which never goes into CICS. So I do not
think it is a left over terminal. Though I will be checking this out.
I am not a true cics sysprog so am light in understanding TPX and the
Autoinstall process. We have setup 1
Mark,
I would think so. I would probably, if it was me, do a dump with delete of
the files from the volume(s) to tape.
Then restore all the files to the target volume making sure I used the NULL
parms for the STORCLAS, MGMTCLAS, etc.
I do not have my books handy so do not recall the specific
I am supporting the DMX3 Disk Array from EMC. We have been experienceing some
performance issues with our Timefinder Snap process.
According to EMC this issue occurred due to microcode level 5671. We did this
upgrade 18 months ago and just now saw this issue and got it resolved.
I am just
We are snapping 198 volumes. For the past several months it has been taking
20 mins to snap. As of Feb 08 it took 40 mins to snap.
After EMC cleaned up some table it now runs in 14 Mins.
SRDF/A is not involved. We are snapping a source volume to another volume
on the string we call SNPxxx.
No, we share the frame with the mid range (Unix) side of the shop. However,
we do not use the same disks in the box, Mainframe dasd is mapped on
separate volumes from the Mid range dasd; I am told there is no
intermingling...
Lizette
Not sure of our microcode level,.. But is your DMX used
Depending on your level of JES2 you may want to look at using PROCLIB
statements in JES2 rather than coding DD statements. Or have the users
start using JCLLIBs.
Lizette
In our system for JES2 RBI1.PROCLIB and RBI2.PROCLIB were defined in
sequence resp. Later due to some reason RBI1.PROCLIB
You need to open and close your JES2 concatention. Do you have a PROC00 and
a PROC01 in your JES2 Proc? It could be any PROCxx number other than
PROC00. If so, all you need to do is run the following JCL
//JOB Card
/*JOBPARM PROC=PROC?? -- Make the ?? whatever your Alternate PROC dd
Jacky,
You cannot move a JES2 JCL defined PROCLIB while JES2 is up. If it is in an
SMS Managed pool, you probably need to look at coding PROCLIB statements in
JES2 rather than the JCL.
Mark makes a valid point.
When JES2 had JCL coded PROCLIBs they are not ENQUEUED so if your security
product
Jacky -
Once JES2 has started the CATALOG is no longer part of JES2's process to
find its JCL defined Proclibs.
JES2 builds an internal table that probably holds information like the data
set name, the volser and the TTR locations in that dataset for the PROCs.
You can with the appropriate
Mary,
Look at the WRITELOG command in MVS to force the syslog to spool and start
another one.
To have the hardcopy message set recorded on the system log, enter:
V SYSLOG,HARDCPY
This should be all you need.
Lizette
Hi Everyone,
We have an issue with our syslog. The command was
Differences in runtime can be a variety of reasons. Do you have any
performance reporting tools like STROBE or do you know how to use RMF or SMF
reporting functions? Do you have MICS or MXG?
More or less, it could be due to any of the following
1) Changes in file size
2) Changes in workload
I forgot to mention that you should search the IBM MAIN archives, I believe
there was a recent thread on job runtime variations.
Lizette
snip
It is the first time, that I write to this list and I am not quiet sure, if
I am on
the right place for asking my question. I hope not being
Do you have any Backup tapes or HSM dumps/backups?
Lizette
Does anyone have a method or tool that can dump and map a 3390 disk
pack? Or more particularly - does anyone know how to get a dataset (or
datasets) back after it has been deleted (outside of restoring it from a
tape copy which we
George - Do you have something specific you are having a problem with? Perhaps
more details please.
Lizette
Does anyone know how to get a hold of Matthew Stitt? His email address
[EMAIL PROTECTED] was returned to me with an 'unknown user' error. I
need his help with a program in file 527 of
I am working on an issue where sometime between 11pm and 3am one of my SMS
Pools goes from 80% used upto 97% used. I added in 4 more volumes and it is
still doing it.
I am working with DCOLLECT and MXG to see if I can isolate out the offending
files. However, the process is not working the
DCOLLECT runs once per day. The time frame for this error is anytime between
11pm and 3am. No specific time, just around Midnight.
I have a file from last night that ran during the event. That is why I was
thinking of running it a little more often. To try and get closer to the
actual
Cross-region share option 2 allows only one processor at a time to open a
data set for output.
You would need to look at what shareoptions will work and how you will make
sure integrity is maintained in the sysplex.
IIRC, if the application and GRS is setup correctly, you might be able to
use
Laurence,
Could you provide more details on what you are looking to do? What do you
mean to restart JES2 standalone?
HOT START JES2 one at a time, QUICK START, or some other process.
JES2 in a MAS will not WARM start easily once the other systems are up.
Plus, JES2 is smarter today than it was
Laurence,
I believe the only way to get a WARM START in JES2 is to have all systems (MVS,
z/OS) down and then bring up one. Once JES2 is up I think only QUICK START or
HOT STARTS are available.
What level of JES2 and what exits are you working with? There is a $T command
to enable and
Mike,
It is more than just SMPE. You have to run the DB2 processes to complete the
upgrade. I have not installed DB2 in a few years. But there are some
customization clists you need to run which will work on your DB2 Catalogs and
Tables. You can do the update so long as you script the
Jacky,
It depends on what you want to change and the reason for the change. Is
this to prevent space abends or some other reason?
If the items are controlled by DFSMS (Storclas, Mgmtclass, etc.) you can use
the ISMF panels to alter a data set.
If it is things in a LISTCAT you can see if IDCAMS
If you post the jcl with error messages it would help.
Basically you go to the JES Messages section and find the reason for the JCL
error. JCL does a decent job of telling you why you got the error.
The JES Messages is the third Data set on SPOOL. First is JOBLOG, Second is JCL
with
Is anyone using the new Encryption Tape Drives (like TS3500) from IBM at a DR
site? If so, how are the keys handled?
Lizette
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to [EMAIL PROTECTED]
This is just a curiosity question.
We will be upgrading our Storage array and at that time the dasd will be carved
out as MOD 9's. Currently we are 99% Mod 3s.
Is there a way without taking an outage to move 3 MOD 3s onto one mod 9?
I was hoping that TDMF, or DFDSS might work but I think they
You had it correct
3 MOD3s to one MOD9.
Lizette
We just finished moving about 12 Mod3's to Mod9's using FDRPAS without
any problems or outages. Many of these volumes were high
usage SMS type
volumes and most were completed in 7 minutes or less.
Charles S. Kammer
Consolidations of
Angel,
What are you running JES2 or JES3 and at what level. There are some slight
differences.
Lizette
--- snip
I am embarking on the task of to develop OFFLOAD, in order to make easy the
process of change dasd types for spool (type 3 to type 9). Actually we are
doing it by draining volumes,
I have been answering some of Angels questions off list.
They are running JES2 V1.8.
Here is what I have provided so far
Angel,
I prefer tape to dasd, less chance for data loss due to space issues.
In the JES2 V1.8 Commands book there is a specification for the VOLUME that
can be added to the
Tommy,
Why don't you put AUDIT on the source file and see who touches it for READ?
IIRC, IND$FILE might be possible to track if you had a product like MXG or
SOFTAUDT or MICS and the access was to the mainframe. Is there a specific way
they are invoking IND$FILE? From a PC or from the
Not sure if this should be posted over on the DB2 newsgroup, but I thought I
would start here.
I am looking for information on whether DB2 V9 runs better under z/OS V1.7
or V1.9. And what might those improvements might be.
I believe I have read that under z/OS V1.9 the DB2 Buffers are
Andy,
My guess would be insufficient storage on your ARCxMIGR STC that is kicked
off for DFHSM migration process. Do you know what your region size is set
at in the PROC?
This is new with z/OS V1.9.
Lizette
Anyone out there seeing this? I'm going open an ETR shortly with IBM but
see this
If you have a cell phone camera, it is not that big of an issue - no one
really thinks there is a camera in the building when it is in a cell phone.
Lizette
That doesn't help if you want the programmer to work on a program but you
don't want him to take it with him.
If he can read it, he can
I am not sure, but you might try the TRUENAME in the command
Lizette
I am having difficulty trying to delete the data portion. The CLUSTER
is not cataloged. I executed a DFDSS backup (PARM=NORUN), using only the
first HLQ to ensure that no other CLUSTER was related to it. None was found
Thought I would see if this might be expanded to what do you do if you had
someone in your organization you thought was stealing company priority
information (source code, data, etc)
I would think that if that person were working on a company supplied PC then
the company could install some sort
Well, I never did find the cause of this issue. It just stopped happening
and the CICS Sys Prog said he did not do anything.
Oh well, another mystery to research later.
Lizette
[]
--- Snip
Check with your CICS person(s). Are the same autoinstall model
definitions available in all CICS
We just added a new frame to the TS3500 we have. So now we have two frames.
The number of slots has not changed. It was 500 slots before the upgrade to
the second frame and 500 slots after the upgrade.
When I go into the Tape library it shows the 900 slots I expected. ISMF and D
Well, depending on the names and what is holding them,
VTAM, TCPIP, LLA, VLF, What
You will probably need to bring something down or update a proc and cycle a
function, or IPL a system or two.
Lizette
I am trying to apply maintenance to z/OS 1.7 but received a D37-04 in
three libraries.
Tom,
I think that issue is when you are on the edge with space in the dataset.
Every time you copy the member (plus whatever aliases) you create a second
copy of the original member. If you do a purge of the file, compress and
load, you only have the one copy (plus whatever aliases) and so it
For my own curiosity, what do you mean re-catalog volumes. I am not
really familiar with recataloging volumes since volumes are only places
where datasets which are cataloged exist.
Do you mean reconnect user catalogs back to a master catalog or do you mean
recatalog vsam data sets or ???
Cross posting to IBM MAIN and TCP groups.
I am trying to resolve an issue with EXTRA! when it is setup for FTP rather
than IND$FILE.
I use IND$FILE and it works great.
When I setup my session for FTP the process hangs when I select Settings (to
choose how the file is transferred).
I looked
I have tried that. The problem is when I select SETTINGS (either throught the
TRANSFER FILE screen or through preferences) the entire Extra! session hangs.
When I look at settings there are absolutley no SCHEME present (not even
default ones).
I have used WS support through ISPF. It works
I would look up the IMPORT CONNECT command to reconnect user catalogs. Most
IDCAMS commands can be found in the TSO HELP facility if do you not have
manuals handy.
Either in TSO READY mode or OPTION 6 issue HELP IMPORT. Sometimes witnin
ISPF you will need prefix the command with TSO. So it
Try posting to the TCPIP newsgroup
For IBMTCP-L subscribe / signoff / archive access instructions, send email
to [EMAIL PROTECTED] with the message: INFO IBMTCP-L
Lizette
[] Snip
[]
First please forgive me to ask question regarding so outdated OS.
I have a problem that we found the resolver
Have you looked at the MIGRATION Manual for z/oS V1.7 to V1.9?
Title: z/OS V1R9.0 Migration (from z/OS V1R7)
Document Number: GA22-7499-12
http://tinyurl.com/4qb4x3
There is also a presentation by IBM called PLAN YOU MIGRATION TO z/OS V1.9 by
Gita Berg and Marn Walled.
Lizette
Hi All,
I am suppose to put to gether some classes for this year. I thought I would
like to add VTAM to a list of things I can do. But I cannot seem to find any
classes for VTAM, APPN, or EE. Does anyone have any recommendations?
Lizette
I found out that our CE did not do a step that no one at IBM knew about for the
addition of a frame. When he issued the command on the ALMS it caused the VTS
to reboot but now we have all of our slots.
Thanks everyone who provided input. But it turned out to be a hardware issue.
Lizette
You will probably get a better answer at the TCP/IP newsgroup.
[EMAIL PROTECTED]
Lizette
I posted the following this morning:
I need to set up a secure TN3270 connection on our z/OS 1.9
system. I have read through the Communications Server IP Configuration
And you can also have a list of IDs that can do anything in SMS that can thwart
the intent of the ACS code.
Lizette
... Your
logic must honor (ie, allow) specific dataset placement when a volser is
coded. It may be part of a compound test.
Not necessarily.
There are certainly times when
I think there might be one issue you also need to deal with. This is old
knowledge and I do not know if the limit still exists, but at one time DFDSS
could only handle so many control cards at one time. The generic allowed
you to handle 100's of files but specific data set backups had a
Gabor,
What are you looking to do with SVC27. Is there a function you are trying to
create? Or do you just want more detail on how SVC27 works?
Lizette
[] -- Snip
Where do I find documentation about SVC 27? I'v found something in book
z/OS V1R1.x MVS Diagnosis: Reference, but it's not
Angel,
Let me repeat what I gave you earlier. Remember that if the job is across
multiple volumes, until that job is completely purged, you cannot free the
one volume. Also look for jobs that have not completed OUTPUT processing.
They are not readily seen.
In SDSF one of the displays I like
Sorry - I must vent here.
Is it just me or is ShopzSeries a poor process.
Somehow they lost the fact that we were licensed for a couple of products. So
when I placed my order they showed up on ADDITIONAL LICENSES screen. I
selected them not knowing the problems that would cause and just
Linda,
Yes my shop loves the internet process for serverpac. This came about
because our z/OS V1.7 order was incorrectly created and somehow in that
process IBM appears to have lost our license for PSF even though it is
installed and properly licensed. I will definitely spend some time at the
Is there a filter on the panel? Or another thought is - Did you set yourself
up as a Storage Administrator on SETUP Panel?
Lizette
What would prevent SMS from returning a list of all datasets that fit a search
criteria?
The list that I got only contains my datasets.
Are both the SDSNLOAD and SDSNEXIT APF authorized? Is one or the other APF
Authorized? If only one is APF Authorized, that is where the error is
occurring. You may have to APF authorize all STEPLIB data sets.
You may want to check with the DB2 Newsgroup to see if anyone over there can
help.
I am getting ready to download my ServerPac from IBM. I have been asked to do
it using a zFS file rather than HFS.
I have done neither in the past. So I am wondering what needs to be done to
create a zFS file to receive the download to z/OS.
I have found past entries in the archives for
John,
Thanks. So far I am not sure our environment is even setup for zFS. I was not
able to find a parmlib member IOEPRMxx. Nor can I find the program IOEAGFMT in
the linklst/lpalist.
I may have to setup some ACS codes as well, I am not sure.
Lizette
I am getting ready to download
A couple of thoughts.
Is it possible that something is going on inside your storage array that is
increasing your run time? What type of storage array? Are the SNAPxx
volumes in the same place as the tape drives? Or are the tape drives and
Storage array some distance apart?
Lizette
stuff.
Lizette
As far as I know the tape drive is a ROBOT. According to the device addresses
(disk tape) they are separate.The device type for the tape is 359L
and disk is 3390.
Lizette Koehler [EMAIL PROTECTED] wrote: A couple of thoughts.
Is it possible that something is going on inside
At one shop I worked at, we setup the User CVT with info like this. I do
not think it is normally found in any system control block. I think you
have to mod it into your environment.
Lizette
-- Snip
I'm making an assumption that somewhere in a control block somewhere (maybe
the CVT, ECVT, or
I guess you are using TSO ALLOCATE Command but I am not sure if this is
CLIST or REXX or some other process.
But basically you will need to allocate each individual data set on a
separate DD then concatenate the DDs.
For example
TSO ALLOCATE DD(DD1) DA(dsn1) VOL(vol1) SHR
TSO ALLOCATE DD(DD2)
This is the first time I have used FTP to download a Serverpac. I have read
the documentation but restart processes seem a little light.
After running for close to 10 hours my job to retrieve the Serverpac from
the IBM server failed with the following messages
GIM44500IVERIFICATION OF HASH
Thanks for the response,
I just did not realize that this type of job would take close to 10 hours to
pull the serverpac from the IBM server and that there might be time outs
causing resubmissions. I was hoping for one continuous job run.
I also learned that my 10,000 cy HFS file I am using
Linda,
Thanks for your response, that makes more sense now. I thought perhaps I
was doing something incorrectly. But since you have a similar experience, I
will just add to my notes for the future that this is just one of those time
consuming processes that will probably get time outs.
Now, all
Are you looking for something specific or just general snooping?
I have used the GOOGLE link for searching in TSO-REXX
http://groups.google.com/group/bit.listserv.tsorexx/topics?lnk=rgr
Lizette
[] -- Snip
Does anyone know the location to access the CLIST and/or REXX lists
archives? REXX
If you have SAS on the mainframe then you can use the SAS UNLOAD function and
select members. It creates an IEBUPDTE output file which is readable.
PROC SOURCE INDD=INDD OUTDD=OUTDD ;
EXCLUDE=BOO: ; (Or INCLUDE=XXX: for all members beginning with XXX)
I have not touched a serverpac in a long time. And I am running into an error
I cannot resolve.
When I do a global change from TCPIVP.TCPPARMS to ZOS19.TCPIVP.TCPPARMS I get
the following error.
CPP0605034I Global CHANGE, NO Data matched your Selection Criteria
I am using CH DSN TCPIVP.
I finally figured out for these specific files I will have to alter each one
individually. I had hoped the Global changes thru the C function under the
MODIFY panel would be better. Instead it is manual
Lizette
Subject: Server Pac question
I have not touched a serverpac in a long time.
Are the tapes having issues all the same type? Or is it to a specific type of
tape.
If you have a VTS, are those tapes seeing this issue?
If you have an ATL, are those tapes seeing this issue?
If you have a native 3490 or 3480, are those tapes seeing this issue?
The question have to do with
The other area to check out for CA1 is the
PPOPTION(TMOOPT00)
CL05236S
The usermod CL05236 may be customized at your shop for TMX EXPDT processing or
the TMOOPT00 member
may have changed.
Lizette
Are the tapes having issues all the same type? Or is it to a specific type of
tape.
If you
I am trying to understand this error message EDC5133I No space left on
device.
I looked it up and it did not help. I tried reallocating the file I thought
it was complaining about and that was not the one. I finally found a better
direction on the CA website and it indicated that the /tmp file
Thanks Mark,
It will mean that I have to read up on how to implement the DFS and zFS
functions in my environment to provide this type of support for HFS.
I have reallocated and mounted my /tmp as 7000 cyls. I hope this is enough.
However, the Serverpac seems smart enough to allow me to restart
I am looking for the ABC's of z/OS System Programming Volume 4. According
to the IBM REDBOOK website it should contain the VTAM and TCPIP information.
I have not been able to locate it on the REDBOOK website. Does anyone have
a link to this manual?
Lizette
Thanks everyone. It would be nice for IBM REDBOOK site to just have a to
be published page for it, rather than me looking for something that does
not exist.
Lizette
On Lionel's page he has it marked not available yet.
http://www.lbdsoftware.com/abcs.html
Chris,
Maybe this thread will catch the eye of IBM and perhaps they can hurry up
this process. I, too, am awaiting with an-tic-i-pation (RHPS) of this
volume. Looking forward to EE, and TN3270 in IP.
Lizette
[] Snip
2. Volume 1, SG24-6981-01, published 30 April 2008
7. Volume 2,
Some steps I would take.
Is there a BCDS entry? If so, then preallocate the data set and HRECOV with
REPLACE
Use the HLIST command to see how big it is and where it use to live. It might
be you have to provide a new home.
Lizette
Wouild someone be able to help me save a bunch of
Mainframe specialty processors: Do they really save money?
http://serverspecs.blogs.techtarget.com/2008/05/20/mainframe-specialty-processors-do-they-really-save-money/?track=NL-576ad=641476asrc=EM_NLN_3694452uid=1706837
or tinyurl
http://tinyurl.com/5epy38
was a little more interesting than
Replacing a library in the LNKLSTxx is more complicated than just adding one.
TMON replaces the library at the bottom of the list which may explain your 0C4s.
To remove/add a library you do the following (IIRC)
1) Create a new LNKLSTxx from the currently active one
2) Using the z/OS Commands
my preference, is to do testing with steplib/joblib first. If everything looks
go, then I empty teh LNKLST'd data set, load it with the new code, then LLA
Refresh or LLA UPDATE, depending.
I do not like adding libraries to the Lnklst. It can add to confusion if
someone else works on a
I just wanted to let everyone know of an issue I had with the Serverpac
Install. First, YES - I did not read the PSP. So it is not a surprise I made
a small miscalculation.
In Dec 2007 there was a fix that was release for GIMUNZIP. It has to do with
SB37 abends on SYSUT1 during the Unzip of
.
Regards,
Jeffrey King
CA
PDSMAN Principle Software Engineer
Columbus, Ohio USA
tel: +1 614 785 2743 or x62743
[EMAIL PROTECTED]
-Original Message-
From: IBM Mainframe Discussion List [mailto:[EMAIL PROTECTED] On
Behalf Of Lizette Koehler
Sent: Wednesday, May 21, 2008 4:05 PM
To: IBM-MAIN
1 - 100 of 1752 matches
Mail list logo