Hi Glenn,
Thank you so much.
Best regards,
Nobuhiko Furuya(古谷信彦)
V-SOL Inc.
e-mail:furu...@v-sol.co.jp
On 2022/05/27 13:31, Glenn Wilcock wrote:
Glad that you were able to solve it!
If you have other questions, please feel free to reach out directly...
wilc...@us.ibm.com
No, he's not right. TSO segment contains "last used" procedure name.
Quotation because it is *usually* last used, but it can be set up by
RACF admin, etc. It is not a proof that user is allowed to use that
procedure. In most cases yes, it is last used procedure and nothing was
changed,
Thx for your replies, i was focused on removing the enqueue but your approach
seems better ;-)
On Fri, 27 May 2022 12:29:16 +, Carmen Vitullo wrote:
>what works for me, *sometimes* is i attempt to rename that dataset first, to
>.old or something, then delete it.
>
>I get a warning
there is a way to remove the enq but I feel it's safer to rename the file from
the (dataset volume list) from 3.4 - then delete
the SETPROG LNKLST,UNALLOCATE command can be issued, but make sure you issue
the
SETPROG LNKLST,ALLOCATE after you are done.
Carmen Vitullo
The RJ45 Ethernet should plug into your network just fine.
As far as bare metal programming Hercules emulator on your PC might be
easier to write and debug with before putting on actual hardware.
On Fri, May 27, 2022 at 2:44 PM Enzo D'Amato wrote:
>
> Parwez is correct that this is a M05 model,
Parwez is correct that this is a M05 model, I will let you know what I have in
terms of processor capacity as soon as I finish setting up power and turn it
on. I in terms of my IO card configuration, this is what I currently have in
the box:
2 2 port pcie 8g ficon cards (pcie)
2 2 port rj45
Do you know the serial number? It's typically on a small label on the
front door. With that, someone from IBM (or maybe even me, I'm not
sure) can go to IBM's Inventory Services and get the configuration data
that was uploaded the last time the machine was connected to IBM's "call
home"
On Fri, 27 May 2022 14:30:41 +, Carmen Vitullo wrote:
>there is a way to remove the enq but I feel it's safer to rename the file from
>the (dataset volume list) from 3.4 - then delete
>
>the SETPROG LNKLST,UNALLOCATE command can be issued, but make sure you issue
>the
>SETPROG
The copy from the old mount point to the new mount point works while
the original mount point is still in use. You only take an outage to
unmount the old file system and mount the new file system. If you
can' t do this, you can update your IPL mounts and it will happen
during the next shutdown /
Enzo,
Congratulations on your acquisition!
I’m curious if you happen to know yet the physical model (it’ll be either
2818-M05 or 2818-M10) and general capacity details, notably the capacity model,
number/type(s) of specialty engines (if any; IFLs, zIIPs, ICFs), and memory
configuration. The
Classification: Confidential
TSO BPXMTEXT EF046068
-Original Message-
From: IBM Mainframe Discussion List On Behalf Of
Mark Jacobs
Sent: Thursday, May 26, 2022 4:28 PM
To: IBM-MAIN@LISTSERV.UA.EDU
Subject: zFS compress failure
[CAUTION: This Email is from outside the Organization.
Hi, Timothy.
Yes, 21st Century Software will be presenting at the VM Workshop.
DJ
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to lists...@listserv.ua.edu with the message: INFO IBM-MAIN
excellent, you are welcome, I think your ENQ issues then was with LLA
possibly
Carmen
On 5/27/2022 10:14 AM, Francois desmadrille wrote:
On Fri, 27 May 2022 14:30:41 +, Carmen Vitullo wrote:
there is a way to remove the enq but I feel it's safer to rename the file from
the (dataset
There was a "count number of random numbers" between 1 and 1M with
hercules and stand alone code. Normally you would create a memory
image and use ICKDSF to put it on a volume in the IPLTEXT.
On Fri, May 27, 2022 at 4:04 PM Charles Mills wrote:
>
> I'm not an expert at this at all so take what
On Fri, 27 May 2022 15:31:35 +, Mike Schwab wrote:
>The copy from the old mount point to the new mount point works while
>the original mount point is still in use.
>
Does that yield an instantaneous snapshot, or are there
timing windows?
>..., you can update your IPL mounts and it
I don’t remember the file number, but the cbttape has a program to delete a
file while ignoring enques.
ITschak
בתאריך יום ו׳, 27 במאי 2022 ב-15:29 מאת Carmen Vitullo :
>
>
> what works for me, *sometimes* is i attempt to rename that dataset first,
> to .old or something, then delete it.
>
> I
Yep. I know all that. Problem is that it'll be next to impossible to get this
file system unmounted since there are many file systems mounted under it that
are being always being used by other systems in the sysplex. It would take
nearly a sysplex IPL to get everything under it dismounted
I have a model 2818 with s/n 02-485F7. I am fairly sure that I have a
relatively low CPU capacity number, and all my unused PCIE card slots have
blank fillers, but 2 of my I/O drawer slots are empty (no card or filler). If
you can do a lookup, I would appreciate it.
Thank you,
Enzo Damato
I'm not an expert at this at all so take what I say with a grain of salt. I
just happened to have two (uninformed?) thoughts:
1. If Enzo wanted to write some bare metal code (which I think is a great idea)
-- are there any examples anyone can point him to? Is there any IPL-able code
on the CBT
what works for me, *sometimes* is i attempt to rename that dataset first, to
.old or something, then delete it.
I get a warning message, I don't recall the exact message but ISPF eventually
tell me I have the authority and allows the rename , eventual delete
when I copy my SMP target
The picture suggests it's a 2818-M05. Where the 2nd CPC drawer (Making it a
M10) is supposed be, it has 'blanking plates'.
Regards
Parwez Hamid
From: IBM Mainframe Discussion List on behalf of
Timothy Sipples
Sent: 27 May 2022 11:04
To:
Enzo,
If you really want to do something outstanding (i.e. impress a university
admissions committee), that doesn't require any hardware or operating system
software beyond the z114, consider writing code that runs "on metal." This is
commonly done in engineering for architectures such as ARM.
On 5/27/22 9:41 AM, Mike Schwab wrote:
The RJ45 Ethernet should plug into your network just fine.
I've run into more than a little network hardware that is only one
speed. Especially if it's an early example from a generation.
Also, the vast majority of the 10GBase-T network equipment that
You would be correct on this. My switch is fibre only for the 10gig. I got it
at a surplus auction a few years ago. I can connect it to the standard 1 gig
copper links, but I wanted to maximize my speed if possible.
Thank you,
Enzo Damato
On May 27, 2022, at 1:12 PM, Grant Taylor
I wrote some bare-metal code back in the early 1990's to basically
attempt to do what zzsa and that stand-alone-edit product does. I
stopped working on it when SAE came out but still have the old code
somewhere. Not for the meek, and I'm pretty meek. It was at the edge
of my capability.
Enzo,
There is 99% chance that all the required code for the I/O and Crypto features
is on the system. When do a POR (power on reset), the code will be loaded from
the SE.
The reason I say 99% is that the 'code' for Crypto is a separate orderable NO
charge feature. There is a possibility the
One partial solution to CKD might be MFNETDISK. You would need some real
CKD to get z/OS up and running.
Not sure what the current status of MFNETDISK is, however, I know a few
years back Fundi (Now Rocket) were using MFNETDISK to offload lots of their
SMF and test data and it apparently worked
On 5/27/22 11:01 AM, Joe Monk wrote:
They do make 10 gig. Copper SFPs...
I assume that you mean copper RJ45s. Yep. I've seen and used them.
I've also seen and used copper Direct Attached Cables where the SFP+,
intermediate cable, and SFP+ are one fixed unit.
This is why I said "vast
On 5/27/22 8:43 AM, Enzo D'Amato wrote:
Most of my home network is 10GbE, and I wanted to put one of those
cards in so I can directly network it to my core switch, but I don't
want to order one if it will not activate.
Impressive.
I am currently working on sourcing FICON storage, and I will
Enzo, this might be a good place to start to learn about bare-metal programming.
http://www.txxos.com/
Good luck to you as well.
DJ
--
For IBM-MAIN subscribe / signoff / archive access instructions,
send email to
They do make 10 gig. Copper SFPs...
Joe
On Fri, May 27, 2022, 11:51 Grant Taylor <
023065957af1-dmarc-requ...@listserv.ua.edu> wrote:
> On 5/27/22 9:41 AM, Mike Schwab wrote:
> > The RJ45 Ethernet should plug into your network just fine.
>
> I've run into more than a little network hardware
I was able to download the config information, but it doesn't seem to
match what you reported. So it could be I'm looking at something else.
Here's a summary - I'll assume you don't mind me posting it here since
many people here want to help.
z114 2818-M05-A01 485F7
26 MIPS, 3 MSU
40 GB
18
I guess it goes without saying you shouldn't wait until the 123rd extent
fills up to take some action :-).
My suggestion is to find some directory (or set of) that you can
temporarily move off of the full filesystem (to /tmp or something). Once
there's sufficient free space, zfs should be able
Sorry, I should have mentioned that I'm trying to avoid all that by using the
zfsadm compress command on the mounted file system. Other file systems compress
without this problem showing up.
Mark Jacobs
Sent from [ProtonMail](https://protonmail.com), Swiss-based encrypted email.
GPG Public
Hello mainframers,
I'm having trouble deleting some data sets.
In order to apply PTFs to a z/OS system, I copied a system volume. Here is the
JCL used :
//COPY1EXEC PGM=ADRDSSU
//SYSPRINT DD SYSOUT=*
//SYSINDD *
35 matches
Mail list logo
